Miscellaneous modification works at various places occupied by DCSEM in VS Bhavan, Anushaktinagar, Mumbai-400 094.

Amount

Part I Civil Work

Deduct for Taking Away

Description of Work / Item(s)

Amount

Dismantling of existing wooden wall paneling, aluminium partitions, Doors, Windows, Ventilators including shutters & frames (chowkhats), Architraves, holdfasts etc. complete and stacking at directed place etc. and disposing the unserviceable materials out side V S Bhavan at location identified by EIC within Anushaktinagar complete. All as directed by the Engineer in-charge.

Dismantling mosaic tile/ white glazed tile/ kotah stone etc.in flooring/ dado/ skirting etc.including dismantling of bedding/ backing mortar and including disposing off debris out side V S Bhavan at location identified by EIC within Anushaktinagar complete as directed by the Engineer in-charge.

Demolishing brick /stone masonry , AAC Masonary in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & disposing of unserviceable materials out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specification & as directed by the Engineer-in-Charge.

Dismantling of existing false ceiling of grid type/ fixed or any type from ceiling completely and handover the scraped metal item in maint. office & disposed off debris materials out side V S Bhavan at location identified by EIC within Anushaktinagar complete. All as directed by Engineer-In-Charge.

Providing and laying autoclaved aerated cement blocks masonry with 115mm/ 150mm/ 230mm thick AAC blocks as per approved manufacturer, using approved block laying polymer modified adhesive mortar in super structure above plinth level at all locations, levels & lead with RCC band at sill level and lintel level all complete as per direction of Engineer in-Charge. (The payment of RCC band and reinforcement shall be made for separately)

Cement plastering 15mm thick using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with pop over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification etc. and removing existing damaged/ worn out plastering and disposing off out side V S Bhavan at location identified by EIC within Anushaktinagar complete all as per specifications and as directed by EIC.

Providing and laying at all floors and levels 6mm.(min.) thick or as per specifications of approved manufactuer first quality matt/ glass finished vitrified tile for dado/ cladding as per the approved pattern and colour as mentioned below of M/s H . R Johnson (I)Ltd., M/s. Kajaria etc. laid in cement mortar bedding / backing, close jointed and grouted with matching cement slurry to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/ cutout if necessary, wastage and final cleaning of surfaces as required, curing etc. complete all as per drawings, specifications & as directed by Engineer in Charge.

In skirting using tiles of size 600mm x 100mm laid over plastered surface fixed with Bal-Endura/Fosroc/Roff tile adhesive as per IS:15477 or as approved and as per manufacturer's as backing applied with 3mm comb

Providing and fixing of 6mm thick flooring tiles of M/s. Welspun (or) any other apprved equivalent with wooden finish & size as per manufacturer specifications & as required by departement in approved pattern and shade including necessary adhesive as per manufacturer specifications over the IPS/ Mosaic flooring/ skirting including cutting to the required size & shape including wastage, removal of old existing flooring cleaning the flooring including providing of levelling course (if required to make horizontal) etc. all as per manufacturer's specifications and as per pattern and including disposal of debris out side V S Bhavan at location identified by EIC within Anushaktinagar complete as directed by the Engineer-in-Charge.

With 6mm Thick tile

Providing and fixing of 100% eco – friendly Light weight calcium silicate inorganic modular Acoustical light weight grid ceilings at all heights having 15 mm thick integral densified edges of Tegular/board edged of Size 595x595MM of M/S Aerolite Industries Pvt.Ltd. Manufactured using Non cementitious Calcium silicate Binders reinforced with eco- friendly inorganic Fibres with Minimum eco-friendly recycled content of 50% (For Green Buildings). The ceiling Tiles should be free from Chemicals, asbestos having Zero VOC for better indoor Air Quality as per requirements of IGBC / Griha. The ceiling tile should be of approved texture, design and patterns like Spectra / Quadra Spintone / Cosmos / Globe / Hexa / Plain having NRC (Noise Reduction coefficient) of 0.50 to 0.75 (for semi perforated and fully perforated range of tiles), Light reflectance of 85% (minimum). False ceilings shall be Tested and classified to fire classification class of A1(Non – Combustible), S1(Zero Smoke), d0 and it should be Mandatorily 100% Non-combustible as per BS: 476 Part IV, Part VI for Non-Flame spread & Part VII for Non flame Propagation & also classified as Non ignitable and smoke developed of 0-5 onlyin accordance with ASTM-E84 as per requirements of UL 723/ Please rafer additional notes.

NFPA 101 of international buildingsafety code. False ceilings must have 100% RH Property guaranteed for 10 years free replacement for sagging/warping and bending. Thermal conductivity of 0.043 W/m°KC to 0.050 W/m°KC as per IS 3346/1980 (High Thermal Insulation). 100% Antifungal, Antibacterial confirming to JIS-Z-2801 and ASTM- G-21 certified by NABL accredited labs. The tiles shall have Thickness: 10 mm thick in the centre and 15mm thick all around on edge resting portion with integral densified edge. 350 kg/M3 in the centre 10 mm thick portion and 450 Kg/M3 cube on the edges, (Average 360 kg per cum as per ECBC Code 2007).The framework shall be suspended from ceiling by slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners and to be suspended by Galvanised 6mm Threaded rod up to 1000 MM Length with Galvanised L Shaped level adjuster of Size 76Z25 X 25 X 1.6mm length with MS Z Cleat of size 25 X 37 X 25 X each 1.6 MM with Pre-cut hole on the 25 mm Flanged, spaced at 1200mm centre to centre. The tile shall be laid on Main runner of size 24x32X0.3MM having 24 MM flange colour white having rotary stitching on all T sections, i.e., the main runner, 1200 mm & 600 mm cross tees with a web height of 28mm &0.3 thickness & load carrying capacity of 11-15kgs/Sqm. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge/Manufacturers Specification.

Supplying and fixing in position at all floors, levels & locations, aluminium section [extruded] for aluminium Door / windows sliding / top hung/fixed / grill/ adjustable louvered/ windows as per drawing of approved manufactures with extruded sections of Jindal / Indal / Aluminax or other approved eqivalent sections with size and weights as shown in the drawing, for frames and shutters [including wastages if any] conforming to relevant I.S specifications, with all approved shade & colour anodised aluminium fittings and accessories, locking arrangements, 2 / 3 rollers with ball bearings for sliding shutters of approved quality all as shown in the drawing, including providing and fixing aluminium channel beading / glazing clips fixed with necessary matching anodised screws, grouting the gap with thermocole & polysulphide sealant etc. all complete generally as per drawings, specifications etc., all as directed by Engineer in charge. but excluding the cost of glazing,which will be paid separately. (Note:- Sliding window sections for both track & Shutters shall be of JINDAL DELUXE DOMAL SERIES or similar equaivalent approved make. ) Please rafer additional notes.

Using integrated anodised (of approved colour & Shade) having glossy/matt finished [Minimum anodic coating of 15 micron thick (Grade AC-15)] aluminium section for Aluminium for Doors and windows

Providing and fixing following type of approved quality glass panes for doors/windows/ventilators/louvers, of approved manufacturer and fixing with aluminium frame work including fixing aluminium channel beading (to be paid under relevent item) and providing and fixing with 2 way EPDM gasketing , to ensure water and air tightness and neoprene cushions/ gasket accommadated in grooves, necessary bronze anodised screws etc, all complete generally as per drawings specifications and as directed by the Engineer-in-charge. Note:- Only clear opening of glass shall be measured for payment.

8 mm thick clear float glass

Providing and fixing heavy quality following fittings for alumininium door/ windows with necessary screws, material, labour, cutting, making good etc complete all as per specifications and as directed by the Engineer-in-Charge.

Concealed tower bolt for aluminium double door shutters (Overall size of 171 mm X 25 mm)

Providing, fixing & Supplying at site of work approved quality and manufacturer, confirmed & marked with relevant IS (wherever applicable), Stainless steel (SS-304) fittings, fixtures and fastenings along with Stainless steel screws/concealed SS screws, bolts, nuts, washers,wooden packing pieces if necessary etc.and other accessories etc complete all as per specifications and as directed by the Engineer-in-Charge. FITTING & FIXTURES Notes: i) One sample board consisting of each item of schedule of quantities with approved quality fittings & fixtures & necessary accessories including chromium plated brass screws, bolts, nuts, washers should be submitted for approval of Engineer-in- charge. Large scale procurement shall be taken up only after approval of the Engineer-in-charge. After approval, the samples shall be kept in the office of the Engineer-in-charge to ascertain the approved quality for the entire work. ii) All fittings & fixtures shall conform to relevant IS code.

S. S. Tower bolt 300 mm long x 12 mm barrel

D type bow handle 150 mm long

Aldrop 300 mm long x 16 mm dia. Rod with an extra staple.

Heavy Duty S. S. Door stopper with twin-rubber bushing (shutter mount type)

SS But hinges (Heavy Weight) of size (125 X 75 X 3.0 mm) , ball bearing type, fire rated & tested.

Providing, fixing & Supplying at site of work approved quality and manufacturer, confirmed & marked with relevant IS (wherever applicable), anodised aluminium fittings, fixtures and fastenings along with Stainless steel screws/concealed SS screws, bolts, nuts, washers,wooden packing pieces if necessary etc.and other accessories etc complete all as per specifications and as directed by the Engineer-in-Charge.

Aluminium Tower bolt 150 mm long x 10 mm barrel

Aluminium Door stopper with twin-rubber bushing (shutter mount type)

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Supplying following type of approved quality miscellaneous fittings, fixtures and fastenings along with necessary SS screws, bolts, nuts, washers, wooden packing pieces if necessary etc and other standard accessories complete.

Supplying 6- lever Mortice lock of chromium plated brass parts & body of Godrej make model no. 7117, 200mm Handle Set Lock Body CK mortice lock with chromium plated brass screws etc. lock shall be fitted as per manufacturer specification and as directed by Engineer in charge.

Providing and fixing 6 Lever Mortice Lock Heavy Duty (Chromium plated Brass 100 mm mortice latch and lock without pair of handles) of approved make suitable for aluminium sections with necessary screws, material, labour, cutting, making good etc complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture having ISI mark as IS : 6315, having brand logo embossed on the body / plate with double spring mechanism for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and having minimum 1.25 mm thickness stainless steel cover plates with brass pivot and single piece M.S. sheet outer box with slide plate, and other accessories required for the works to facilitate smooth operation of the door shutter etc complete all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing approved quality open door closer of Dorma Make or equivalent make with necessary screws, fixing to the aluminium / glass / wooden door complete as per drawings, specifications including all labour, transporting etc. and as directed by the Engineer-in-Charge .

Providing and fixing approved heavy duty quality friction hinges of Dorma/ Cotswold/ Geze Make to take the window weight to perform functionally well with necessary screws, fixing to the existing aluminium windows including removing the damaged one and refixing the new one with alignment, line and level including providing gasket to glass frame with approved make all complete as per drawings, specifications including all labour, transporting etc. and as directed by the Engineer-in-Charge .

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.

66 mm overall thickness partition using 8 mm thick double skin multipurpose cement bonded wood particle board manufactured as per IS:14276 with suitable cement bonded board screws

Supplying & fixing in position at all floors and locations, 38 mm thick of following type solid core block board flush door shutters with commercial plyfacing on both sides conforming to IS 2202 (latest)bonded with phenol formaldehyde synthetic resin consisting of single leaf shutter(s) with second class teak wood 38X20 mm size lipping polished alround,with/ without view panel, fixing shutters in position topressed steel door frames/ wooden frames/ graniteframes [door frames (choukat) shall be paid separatelyunder relevant item] at all floors by cutting / planning if necessary including labour for fixing of the fittings & fixtures as per drawing with wooden packing pieces if necessary (but excluding the cost of fittings and fixtures with screws which shall be paid separatelyunder relevant item) including providing & fixing 1 mm thick decorative laminate sheet of approved colour, pattern and shade fixed onboth sides etc.with approved adhesive for all surfaces including edges, including cost of all materials, adhesives, labours, wastages if any, all as per specifications, drawings all complete as per specifications, drawings & all as directed by E-I-C.

For approximate size 1000x2100 mm, single leaf shutter with 500 mm x 200 mm vision panel with 4mm thick clear transparent glass of Modi Guard fixed with second class 10x20mm size teak wood beading in both sides as per drawing.

Providing & fixing Hollow Metal Pressed steel (HMPS) door frames of following profile fabricated out of 1.60 mm thick G.I sheet of coating (Class VIII of zinc coating) 120 gram/sqm, manufactured by Sail / Lloyds/ Jindal or equivalent of profiles / size generally conforming to IS 4351-2003 with suitable one/two set rebates for fixing shutters and also rebate suitable for fixing fixed glazing including hole for self tapping screws wherever shown in the drawing, each frame to contain hinge jamb, lock jamb and head all rigidly fixed together with welded /mechanical joints with back plates /angles to correct shape & angles including providing and fixing base ties with GI channel 50x25mm, 1.25mm thick suitable section to suit floor thickness / angle thresholds with MS angle 25x25x3mm, 6nos. of adjustable lugs per frame, providing and welding of 40x40x5mm,150mm long angle cleats for hinges with necessary tapped holes for fixing counter sunk headed machine screws to suit heavy duty oxidised / stainless steel hinges of size 125mm x 65mm x 2.8mm/125mm x 76mm x 2.80mm/ 100mm x59mm x2.6mm/75mm x 48mm x 2.45mm or shop type welding and self taping screw for fixing hinges/

piano hinges etc. and finishing the same to smooth etc. (but excluding the cost of hinges which shall be paid under the relevant item) including providing each door frame with necessary lock strike plates, mortar guards, buffers, bushes etc. required for tower bolt/ baby latches, tadis, safety chains, aldrops etc including fixing the frame to brickwork/ concrete work with necessary PCCor bolted/ screwed to concrete work, painting a shop coat of polyurethane paint including etching the surface with ETCH primer etc. including painting the exposed surfaces with two coats of synthetic enamel paint of approved make and colour over a coat of red oxide/ zinc chromate primer and painting the unexposed surfaces with two coats of anticorrosive bituminous paint, after rectifying the damaged PU primer due to transport including filling the hollows of door frame with C.C.1:2:4 using 12 mm size downgraded stone aggregate, curing, finishing etc. all complete as per drawings, specifications and as directed by Engineer in charge. Note: The quoted rate shall include cost of base tie / angle and all accessoriesmentioned in the item description except iron mongeries (i.e. fittings and fixtures with wood and machine/ self taped screwsas required, which shall be measured and paid separately under relevant item.)

Profile 145 x 60 mm

Providing & fixing in position approved quality 2nd class teak wood architraves section as given below of approvedprofile for the following sizes fixed to pressed steel frames of door/ cupboard/wardrobe/ MS doors at all floors as per drawing including providing and fixing M.S. self taped screws at 600 mm center, painting with two coats of synthetic enamel paint of approved make & colour over one coat of approved wood primer / polishing with two coats of french spirit polish over a coat of wood filler to form uniform neat finish (as specified) of approved make and shade. etc. all complete as per specification & drawings.

Size 50 mm X 20 mm of finished size, with chamfer, groove, corner, notch, (2 X 2 mm / 3 X 3 mm).

Providing and applying 1.5 mm thick white cement based wall care putty in two coats of approved make, at all floors, levels and locations, over plastered surfaces finished smooth to correct line, level, plane, plumb etc., including preparing the surfaces, scaffolding smoothen the putty surfaces with very fine water proof emery paper to get a glossy finish etc. and On Old Surfaces. (Including thoroughly scrapping, removal of old paint, if any, sand papering & preparing the surfaces, applying approved putty for touch up to fill up crevices mild depression etc, necessary covering material (tarpaulin etc), cleaning, removal of splashing & droppings of floors, wall, ceiling, doors & windows etc & disposing of debris at directed place inside colony. )complete as per specifications, as per manufacturers specifications, drawing & as directed by the Engineer-in-charge.

Providing & applying acrylic emulsion (plastic) paint for internal plastered surfaces in two or more coats on old / new surfaces ( On Old Surfaces (Including thoroughly scrapping, removal of old paint, if any, sand papering & preparing the surfaces, applying approved putty for touch up to fill up crevices mild depression etc, necessary covering material (tarpaulin etc), cleaning, removal of splashing & droppings of floors, wall, ceiling, doors & windows etc & disposing of debris at directed place inside colony. )) at all floors, levels & location using ready mixed & ready made acrylic emulsion paint of approved make and shade including one coat of approved cement / acrylic primer (water thinnable) including labour, material, scaffolding, surface preparation, cleaning etc complete all as per specifications and as directed by Engineer-in-Charge. (Note:- Acrylic emulsion shall have VOC content less than 50 grams/ litre)

Carefully removing existing wooden cabinets/cupboards/ workstations including loading, unloading, stacking at all lead and lifts at directed place and at office establishments at various places such as within Anushaktinagar Colony, Old Mandala and 312 Site Office including necesary fixing with all necessary fixtures and fittings etc. and disposing the unserviceable materials out side V S Bhavan at location identified by EIC within Anushaktinagar complete. All as directed by the Engineer in-charge.

Providing and fixing heavy quality following fittings for alumininium door/ windows with necessary screws, material, labour, cutting, making good etc complete all as per specifications and as directed by the Engineer-in-Charge.

Single point lock cum handle for aluminium openable windows / top hung shutters.

Providing and fixing heavy quality anodised aluminium peg stay along with eye for alumininium windows with necessary screws, material, labour, cutting, making good etc complete all as per specifications and as directed by the Engineer-in-Charge.

300 mm long

Description of Work / Item(s)

Amount

Rebate Item,

Rebate for taking away the materials including labour, loading, unloading, transportation, cleaning etc complete all as per specifications and as directed by Engineer-in-Charge.

Old Reinforcement steel bars, structural steel members, GI pipes, CI pipes, steel frames, steel windows, roofing Sheets, barbed wire, Chain link fencing, concertina coil, weld mesh

Old wooden panelled door shutter, Flush door shutters, Ply, block boards, Old wooden door & window frames etc

MARUTI ENTERPRISES

MARUTI ENTERPRISES

MARUTI ENTERPRISES