GE/BAs-51/2021-22 SPECIAL REPAIR TO BLDG NO P-16 (COOK HOUSE) and BLDG NO T-59 (DINING HALL) AT BDE SIG COY AT BASOLI GRN UNDER GE BASOLI and JANGLOT

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed.

-Ditto- all as per Srl item No. 2 here-in-before, but except bricks.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distember complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for applying 3 mm thick wall care putty on new/Old surface complete all as specified and as directed.

M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of oil emulsion destember complete all as specified and as directed.

M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of cement base paint complete all as specified and as directed.

M & L Preparation of new surface of wooden and applying two coat of synthtic enamel paint over a coat of pink primer all as specified and directed .

M & L Preparation of new surface of steel and applying two coat of synthtic enamel paint over a coat of red oxide zinc all as specified and directed .

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in levelling cousre complete all as specified and as directed.

M&L for 50 mm thick Sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone slab as in skirting / dado, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed

M&L for 20 mm thick Granite as in border/cooking platform etc, bedded and jointed in 20 mm thick cement mortar 1:6 including pointing in white cement 1:2 using with admixture of pigments to match the shade of Granite stone including cutting and polishing complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4), complete all as specified and as directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Dismantling of any type of roof covering (Plain, corrugated, semi-corrugated, steel etc.) sheet , complete all as specified and as directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings, complete all as specified and as directed.

Ditto all as per item No 27 here-in-before but plain sheets.

Dismantling wrough iron or mild steel work of any descrfiption not otherwise provided for, complete all as specified and as directed.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rail and heavy brackets framing and MS frame work for wire mess (Beams, tee, angle, channel or flat section) including distance pieces incl two coat of synthetic enamel steel paint over a coat of red oxide complete all as specified and as directed.

S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter,and including shutter for wire mess (glass panes and wire mesh shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete all as specified and as directed.

Supply and fix for natural colour anodized aluminium window with frame of size 101.60x44.45x1.60 mm of approved manufacture fixed in position on wall with rawl plug and screws and window shutter as per direction given by Engr in Charge and glass pane 5 mm thick coloured fixed with rubber gasket and beading/glazing clip size 19.00X17X 0.70 mm (weight 0.097 kg /RM of both side), including suitable aluminium handle, tower bolt hinges and including aluminium flyproof shutter as per direction given by Engr in Charge including taking down old U/s windows of any type all as specified and directed.

Supply and fix for natural colour anodised Aluminum Door shutters side hung type with safe bars locking rails locking arrangements and Hydraulic floor door closing arrangements including necessary joining cleats glazing clips rubber packing anodised aluminum snap beading screw suitable handle 150mm size etc and including 5-12mm thick sheet glass fitted type black in any colour, size of lock rails 44.45x81.50mm side rails 85.85x44.45mm, top rail 83.5x44.45mm, bottom rail 150x44.45 and thickness of aluminum member 1.50mm thick including anodized aluminum frame of size 101.60x44.45 and thickness of member 2mm including fitting arrangements complete including taking down old U/s door of any type all as specified and directed.

S & F in position suspended false ceiling system using E - grid suspended ceiling grid system of M/s saint Gobain . The size of grid shall be 600x600 mm with GI frame work main runner 38X24 mm cross Tee 25X 24 mm and wall angle 24mmX24mm using 9 mm thick ceiling panel laminated with PVC film on front face and foil back availalble in due drop textureas per IS -2095Part-I 1996 fixed in the grid suspended ceiling grid system duly suspended by 4 mm dig GI bar hangers from the purlins of the roof with butter fly clips complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but n exc 4.0 Sqm each and removing from site complete all as specified and as directed.

S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including including two coat of synthetic enamel paint on steel surface over a coat of red oxide complete all as specified and as directed.

S&F Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including including two coat of synthetic enamel paint on steel surface over a coat of red oxide complete all as specified and as directed.

M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed.

S&F 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.

S&F 35 mm thick, 2nd class soft wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

S&F butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.

S&F 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

S&F aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed.

S&F door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and as directed.

S&F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.

S&F Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

S& fix in repair, Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

S&F Mild steel framed work as in grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

S&F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed.

M&L for Stainless steel gratings 100/125mm dia fixed with cement motar, complete all as specified and directed.

S&F in repair waste pipe for WHB/Urinal for 32/40mm dia all as specified & as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.

S&F 15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified.

S&F 20mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified.

S&F Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified.

S&F Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified.

S&F Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified.

S&F Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified.

M&L for 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in copings, bed plates, kerbs, ramps etc, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with PVC terminal sunk boxes with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and as directed. NOTE :- a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc all as directed.

All as per item No 2 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 2 but for one 3 pin 5 Amp socket outlet on same board.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified. .

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as specified and directed

Supplying & Fixing Switch socket combination 2 in 1, 5 pin, 5 Amp flush type, complete all as specified and as directed. Make :-C&S/Havells/polycab/Plaza

Supply & Fixing socket outlet 5 amps 5 pin flush type, 230 volts, complete all as specified and as directed.

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as specified and directed by Engr-in-Charge. Make :-C&S/Havells/polycab/Plaza

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified and as directed.

S&F in replacement LED tube light fitting 1x16w,230v including LED tube rod with polycarbonate diffuser, 4 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed.

S&F in replacement LED tube light fitting 1x10w,230v including LED tube rod with polycarbonate diffuser, 2 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings, complete all as specified and as directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and as directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service valu 6.00 BEE. Five Star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S&F in replacmenet sheet metal powder coated vertical double door single pole and neutral (SPN) distribution board for MCB provision 230 Volts 50 Hz AC supply for 8 Way fitted with copper bus bar rated 200 Amps, neutral link, earth bar complete all as specified and as directed.

S&F MCB SPN 63 Amps with 10 KA Breakiing capacity of C series in distribution boards complete all as specified and as directed.

S&F MCB SP 6-32 Amps with 10 KA Breakiing capacity of C series in distribution boards complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate up to 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe up to main board, funnel with wire mesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point complete all as directed.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE 16 sqmm 2 core, PVC insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area complete all as specified and as directed. Make- polycab/KEI/RPG

S&F DWC high density polyethelene pipes in replacement having 63/50outer dia mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site including aking down the old unserviceable complete all as specified and directed. Make -Trupati /Equivalent

S&F Single Door (SPN) DBs 02 way 220 V 50 Hz with MCB SPN 10 Amps 10 KA, complete all as specified and as directed.Make - Legrand /C&S / IndoAssian

Suppply and fixing Post top Lantern LED type 40 Watt 230 Volt AC Out door Type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp, complete all as specified and as directed.

Ms International Engineers

SHUSHANT ASSOCIATES

Ms Dalip Kumar and Co.

M/S VIJ CONSTRUCTION CO

Om Sai Ram Builders

SATISH AND CO