REPAIR TO PROTECTIVE WORK, HARD STANDING, DRAIN AND REPAIR TO SAINTARY PLUMBING TILING AND OTHER MISC WORK AT E/M WATER SUPPLY INSTALLATION AT MIL STN KASAULI AND DAGSHAI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where complete all as specified and directed.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in road side parapet / Drain all as specified and as directed

All as per item No 2.00 but except stone complete all as specified and directed

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified and directed

Dismantling timber scantlings 40 sqcm and under in section, in any position framed / Unframed work complete all as specified by the Engr-in-Charge

Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified

M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed including all quoins arches pillars commplete all as specified and directed

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as psecified.

M&L preparation of new plastered surface of wall and applying two coat of oil bound distemper of any approved tint over a coat of primer complete all as specified and directed

M&L preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer on walls complete all as specified and directed

S&F in repair 15mm bore Bib taps, chromium plated cast copper alloy, fancy type, screwed down for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repair 15mm bore angle cock, chromium plated, brass, fancy type, screwed both ends for iron pipe or for union etc complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts,) complete incl making good to floor to match with adjoining surfaces including plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated of aluminium hinging device etc complete all as directed by Engr-in-Charge

S&F as in repair fixing WC Orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) includung provision of lime concrete bedding and PVC S trap of 110 mm dia etc complete all as specified and directed by Engr-in-Charge

S&F in repairs Vitreous China wash hand basin white with pedastal flat back size 550x400 mm including brackets and waste coupling, complete all as specified

S&F CP grating of 100 mm da including jointing with solvent cement all as specified and as directed

S&F in repair 10 ltr capacity PVC valveless syphonic action type flusing cistern low level white with inlet ball valve float and handle including bracket fixed etc complete all as specified

S&F in repair PVC connection 15mm bore with PTMTnuts of length 450mm etc complete all as specified

S&F in repair 32mm dia PVC flexible waste pipe for urinals/WHB/sink all as specified

S&F for 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified. Including taking up or down steel tubing and connections upto 15mm bore.

S&F for 20 mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified. Including taking up or down steel tubing and connections upto 20 mm bore.

M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia and taking down old unserviceble PVC water tank all as specified in SSR Part-I completed and as directed by the Engr-in-Charge

M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia and taking down old unserviceble PVC water tank all as specified in SSR Part-I completed and as directed by the Engr-in-Charge

S&F in repair 15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified.

Material and labour for Glazed ceramic coloured tiles in vertical surfaces exc 0.08sqm and n exc 0.16sqm, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Non skid ceramic coloured tiles 7mm to 8mm thick (squre/rectangular) area of each tile exc0.11sqm but not exc 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified.including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for preparation of plastered or unplastered old surfaces of walls and applying one coat of oil bound distemper of any approved tint complete all as specified and directed

M & L for preparation of old painted wooden surfaces of any description position and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) all as specified and as directed.

M&L preparation of old painted steel surfaces exc 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L preparation of old plastered wall surfaces and applying two coat of exterior emulsion paint of approved tint and make complete all as specified and directed

M&L preparation of old plastered wall surfaces and applying one coat of exterior emulsion paint of approved tint and make complete all as specified and directed

M&L for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in sub base floor and in foundation including necessary form work complete all as specified and directed.including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )

M&L for PCC Type B1 1: 2:4 (20 mm graded stone aggregate ) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as in coping ,kneelers , appex stone, coping etc .including demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for and disposing off the rubbish materials all as specified and as directed

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment set and jointed in neat cement slurry over 20 mm thick cement screed in CM 1:6 Including demolition all as specified.all as specified and as directed

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment set and jointed in neat cement slurry over 20 mm thick cement screed in CM 1:6 all including demolition as specified.all as specified and as directed

M&L for Chequered cement concrete tiles 30 cmx 30cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM 1:6 in floors with grey cement and pigments including demolition complete all as specified and directed

Material and Labour Framed work such as grills, gratings,railing etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

Material and Labour for Welded steel wire fabric n.exc 4 Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.

M&L for cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate) as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )

S& F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, otching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M& L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) as in foundations,filling and mass concerete etc complete all as specified.including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )

Supply only Mild steel round bars 10mm dia and over, fixed in chainlinkfencing including necessary welding work all as specified and as directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc,complete all as specified.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed screwed bothe ends, each screwed end to be fitted with washers and one hexagonal or square nut diameter of neck 5 to 10 mm exc 5 cm and n exc 10 cm long complete all as specified and directed

S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed each line wire to measured) complete all as specified and directed

Supply and fixing chain link fencing mild steel galvanised fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provn of binidng wire any size or type including dismantling complete all as specified and directed

S & F for 0.63mm Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and bend to curve all as directed including dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

S & F plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed including dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.d including dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.d including dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

M&L for cement concrete in surface channel and drain type C1 1:3:6 (20 mm graded agg) nd finishing surface even without using extra cement including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials all as specified and directed

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in sub base floor and in foundation including necessary form work complete all as specified and directed.including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )

M&L for PCC Type B1 1:2:4 (20 mm graded stone aggregate ) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as in coping ,kneelers , appex stone, coping etc .including demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for and disposing off the rubbish materials all as specified and as directed

M&L for precast RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in landing cover slab for kittchen platform manholes , septic tank set in cement mortor ( 1:6) including necessary form work complete all as specified and as directed. (Reinforcement shall be measured separately)including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in position not otherwise specifically provided for complete

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5mm dia or securing with clips quality confirming to deformed or twisted bars complete all as specified and as directed.

M & L Rendering 15mm thick on fair faces of new brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified.

M/L for PCC 1:3:6 type C-1 using 20 mm graded stone agg as in coping to retaining walls/steps/parapet /base of railing post etc including necessary formwork and forming construction joint at 3.00m interval and expansion jpoint at 10 m interval etc complete all as specified.

S&F PVC pipes 110 mm bore as in weep holes complete all as specified.

M&L for Raised pointing in cement mortar 1:4 to brick or stone masonary wall complete all as specified.

M&L for boulder filling dry, hand packed tightly ,as in back filling of retaining wall.

PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channels/drains including necessary formwork complete all as specified.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:4 as in manholes complete all as specified and as directed by Engr- in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar.

M&L 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub floors, filling and mass concrete etc

M&L machine pressed precast concrete Coloured interlocking paver block of any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement & pigment complete all as specified and directed by Engr-In- Charge.

M&L Sand filling under interlocking coloured paver block average 25mm thick complete all as specified and as directed.

S&F for mild steel in flat, round or square bar in available lengths conforming to Fe-410-W Gde E-250 complete all as specified and as directed by Engineer-in-Charge..

Cement concrete (1:3:6), type C-2, using 40 mm graded crushed stone aggregates as in foundation, filling & mass concrete complete all as specified and as directed.

Amount of credit of Rs. 87465.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Sagar Builders

M/S CHOPRA & COMPANY

RR Builders

Vinod Kumar Aggarwal

R B TRADERS