Construction of Head Regulator of Balluana Minor cum Cross Regulator at RD 47918 of Behman Distributary

Dismantling brick work, Tile masonry or tile lining (in cement mortar) (8.5b)

Dismanling concrete , cement concrete plain 1:2:4 mix

Earth work in excavation of foundation of structure as per drawing and technical specification, including setting out construction of shoring and bracing removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. (Depth upto 3m)

Preparing, watering & ramming surface of laying concrete (horizontal).

CC 1:4:8 with Stone Ballast 40 mm gauge mixing by mechanical means using concrete mixer volumemetric type

Laying plain cement concrete 1:3:6 (M- 10) nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete in all respects.

Plain/RCC in sub structure complete as per drawing and technical Specifications. PCC Grade M15. Height upto 5m

Plain/RCC in sub structure complete as per drawing and technical Specifications. PCC Grade M20. Height upto 5m using concrete mixer

Plain/RCC in sub structure complete as per drawing and technical Specifications. PCC Grade M25. Height upto 5m using with batching mix plant transit, concrete pump

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. (RCC Grade M-30) (height 5-10m) (ii)Using Batching Plant, Transit Mixer andConcrete Pump

Supplying, Fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications

Excavation in soil (any type) using Hydraulic Excavator CK 90 hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirement of lines, grades and cross sections, including all lifts and combined lead up to 30 m. (Rehandling of earth)

Cement concrete 1:5:10 with brick ballast 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Provision Of RCC Crash Barrier at the edges of bridge road approaches to bridge structures and medians constructed with M-40 grade concrete as per dimensions in the PWD standard drawing no 27 section 4 including form work but excluding steel r/f and at locations directed by the engineer all as specified with concrete mixer

Providing and Fixing mild steel Hand Rail over Crash Barriers,complete as per drawing and Technical specifications.

Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dust, oil, grease, efflorescence and applyinf paint @ of 1 litre for 2 sqm

Extra for laying earth as per specifications for compaction in 20 cm layers, dressing, watering the earth and rolling to specifications.

Earthwork for lip cutting for lining of irrigation channel inclusive of all allowances, lead and dressing as per PWD specification upto 1.5 mtr.

Dressing of Earthwork ( Repair work )

Dressing of Side Slopes and prepration of sub grade for lining.(19.2)

Earthwork excavation in foundation, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and side of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.

Laying 1st class brick lining 7.5 cm thick laid in 1:3 CSM over 10mm thick cement Plaster 1:3 over 12.5 mm thick cement plaster 1:5 over dressed sub grade (for side slopes) including supply carriage, loading and unloading of material from source to site of work complete in all respects as per PWD specification.

Laying brick on edge coping 229 mm wide and 115mm thick in cement sand mortar 1:3.

Excavation in soil using excavator and hydraulic trolley including cutting and loading in trolley and transporting to embankment location within all lifts and lead excluding royalty

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 10 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (57/22 x 8mm) (100/44)

Supply, Providing and fixing of Galvanized Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

Supply, Providing and fixing of CSK Screw (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

CI Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects

MS Spindle with Double Start or Triple Start Threading 1/3/4" dia complete upto 1.5 ton capacity

Supply and Fixing of spindle cover ( PIPE )

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Providing & Fixing Clamp Plate, complete in all respects

Painting of Gate Leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint. Painting two coats excluding priming coat.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Providing and Fixing Plates

Providing and Fixing ISMC 75x40mm

Providing and Fixing of ISA 30x30x5mm

Providing and Fixing of MS Square Bar 16 x 16 mm

Providing and Fixing Stainless Steel Flat

Providing and Fixing ISMB 100 x 75 mm

Providing and Fixing of Anchor

Threading of Pins complete in all respects and to entire satisfaction of Engineer-in-Charge (Upto 75mm)

Providing and Fixing ISMC 150 x 75mm

Providing and Fixing SHS (Supply of GI Pipe hollow/pipe of any size)

Fillet welding with high strength steel rods complete in all respects (6mm)

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel

Supply of Mobil Oil

Machining of Anchor Bolt to give shape complete in all respects and to entire satisfaction of Engineer-in-Charge

Providing & Fixing of Pin in position complete in all respects and to entire satisfaction of Engineer-in - charge. (upto 75mm/above 75mm)

Fixing of coupling of common shaft with supply of Spindle shaft coupling rods and cover complete in all respects and to entire satisfaction of engineer in charge

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Suppling and fixing of common shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge

Please Enable Macros to View BoQ information

DEPARTMENT OF WATER RESOURCES

Name and Address of Contractor / L&C Society

Contact No.

Landline No.

Mobile No.

Name and Address of Banker

Income Tax Return for any one of the last three years

Approximate value of work in hand

Bank solvency certificate

Certificate of "……." Class/Society registeredwith irrigation Deptt.

DEPARTMENT OF WATER RESOURCES

Name of the Contractor / L&C Society

Name of the Work

Please fill information about the each relevant work completed during the last Three years for works Costing more than Rs._________________

Name of Employer