COMPREHENSIVE MAINTENANCE AND MISCELLANEOUS B/R WORKS AT CSAI MESS MEHRAMNAGAR, ARC MAHIPALPUR AND RRC GHITRONI (RESTRICTED AREA) UNDER GE (SOUTH WEST) NEW DELHI-03

Amount

Demolition of cement concrete (reinforced) of any description & in any position of manhole / drain cover slabs etc complete all as specified and as directed.

S&F 75mm thick SFRC manhole cover slabs medium duty of shape & size as required at site complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

M & L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 4 complete all as specified and as directed.

M&L for Brickwork with sub-class ‘B’ bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick work or on concrete surfaces finished fair and even without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick work finished even and fair complete all as specified & as directed.

M&L for applying two coats of oil bound emulsion distemper over and including a coat of primer over and including 3mm thick putty including preparation of new plastered surfaces complete all as specified & as directed.

M&L for applying two coats of cement based paint over & including a coat of primer including preparation of new plastered surfaces complete all as specified & as directed.

Supply only in replacement brass spindle/ phase suitable for chromium plated angle valve, stop cock, bib tap, swan-neck, concealed stop cock etc of size 15 mm bore complete all as specified and as directed.

Supply only in replacement 32 mm bore full thread waste coupling brass chromium plated for vitreous china sink, vitreous china WHB, vitreous china urinals, steel sinks etc with long screwed shanks and fly nuts complete all as specified and as directed.

Supply only in replacement PVC auto syphon internal fittings (as per sample kept in Sub Division office) for vitreous china auto flushing cistern of urinals complete all as specified and as directed and as directed.

Supply only in replacement complete internal fittings of PVC or vitreous china ware flushing cistern single syphonic action type 10 litre capacity including flush handle, rod and ball cock etc complete all as specified and as directed.

All as per item No 14.00 here in before but for double syphonic action type flushing cistern complete all as specified and as directed.

Supply only in replacement 32mm bore brass chromium plated bottle trap for wash hand basin, sinks, urinals, etc with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and as directed.

Supply only in replacement 15 mm bore fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete including CP cap complete all as specified and directed.

Supply only in replacement 15 mm bore bib cock brass chromium plated fancy type with elegant knob screwed down high pressure complete including CP cap complete all as specified and as directed.

Supply only in replacement 15mm bore brass chromium plated swan neck tap for WHBs with elegant knob and long screw shank, screwed down high pressure complete all as specified and as directed.

Supply only in replacement 15mm bore brass chromium plated fancy type pillar cock for WHBs with elegant knob and long screw shank, screwed down high pressure complete all as specified and as directed.

Supply only in replacement 15mm bore Brass CP Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed of size 15mm, complete all as specified and as directed.

Supply only in replacement 15mm bore CP extension Nipple for GI/PPR pipes complete all as specified and as directed.

Supply only in replacement 15 mm bore bib tap standard of PTMT, color as required, high pressure screwed down for iron pipe or PPR pipe (minimum weight 15 mm -90 gms) complete all as specified and as directed.

Supply only in replacement 15 mm dia stop valve PTMT any color high pressure screwed for iron or PPR Pipe and fixed (minimum weight 15 mm -110 gms) complete all as specified and as directed.

Supply only in replacement 600mm long PVC connection with CP brass nuts & PVC /rubber washer suitable for 15mm bore tap / pipes complete all as specified and directed.

Supply only in replacement float valve for flushing cistern complete all as specified and as directed.

Supply only in replacement PVC handle CP finish suitable for low level flushing cistern double syphonic action type complete with rod all as specified and as directed.

Supply only in replacement 125mm dia chromium plated gratings with or without hole over nahani / floor traps including embedded the same in white cement to match complete all as specified and as directed. Make : Prayag Cat Part No FT-18 or equivalent

Supply only in replacement CP connection, two way including unions, washers, spreaders, suitable to fit to auto flushing cistern for urinals complete all as specified and as directed.

Supply only in replacement CP connection three way including unions, washers, spreaders, suitable to fit to auto flushing cistern for urinals complete all as specified and as directed.

Supply only in replacement chromium plated brass toilet paper holder with flap guard fixed to wall with brass screw complete all as specified and as directed.

Supply only in replacement chromium plated brass soap dish fixed to wall with brass screw complete all as specified and as directed.

Supply only in replacement Liquid Soap Dispenser complete all as specified & directed. Make : Prayag Cat Part No : 493 or equivalent

Supply only in replacement tubular Towel Rail, aluminium anodised 20mm dia, D type, 60cm long between flanges including ss screws and wooden/plastic cleats complete all as specified and as directed.

Supply only in replacement 32mm bore flush pipe of polyethylene of low or high density or PVC suitable for low level flushing cistern for EWC/ IWC complete all as specified and as directed.

Supply only in replacement plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as specified & as directed.

Supply only in replacement white, vitreous china, wash hand basin, flat back, size 550 x 400mm including brackets complete including making good the surface / joints with white cement complete all as specified and as directed.

Supply only in replacement white, vitreous china pedestal for wash hand basin of size 550 x 400mm including brackets complete including making good the surface / joints with white cement complete all as specified and as directed.

Supply only in replacement oval type wash basin ivory size 460 x 310 x 220 mm excluding taps, waste chain and plug and porcelain stopper and 32mm Waste coupling of brass (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms incl waste pipe complete all as specified and as directed.

Supply only in replacement Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply only in replacement Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mmcomplete all as specified and as directed.

Supply only in replacement 15 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20mm-210gms./ 5mm-455gms/ 40mm- 690 gms) complete all as specified and as directed.

Supply only in replacement Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply only in replacement 15 mm bore, two in one bib Tap, brass chromium plated, with elegant knob, screwed down, high pressure including CP cap complete all as specified and as directed.

Supply only in replacement 15 mm bore, two in one angle valve, chromium plated with elegant knob, screwed down, high pressure including CP cap complete all as specified and as directed.

Supply only in replacement 10 ltr capacity, PVC, low level flushing cistern (white) with complete internal fittings, inlet ball valve, float and handle, single syphonic action type complete all as specified and as directed. Make: Cera/Prayag/Hindware/Parryware

Supply only in replacement Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply only in replacement 32 mm bore waste pipe for WHB, Sink, Urinals etc complete all as specified and as directed.

Supply only in replacement 600mm x 450mm bevelled edge looking mirror of approved shape & size of superior quality glass, CP check nuts, mounted on wall with screws, washers complete all as specified & as directed.

Supply only in replacement 80 mm dia CP Overhead Round Shower (without Arm) complete all as specified and as directed. Make : PRAYAG Cat No : BOS-103 or equivalent

Supply only in replacement Corner Glass Shelf 300 mm (with brass brackets) complete all as specified and as directed,.Make : Prayag Cat No : BEA-44 or equivalent

Supply only in replacement in repair vitreous china urinals half stall type white including connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screws and PVC rawal plug and and making good the surface by white cement to match the wall shade complete all as specified and as directed. Make – Hindware / Parry ware / Cera

S&F in repair 12mm thick frosted toughened glass as in urinal partition fixed with stainless steel brackets & clamps complete all as specified and as directed.

Supply only in replacement 15mm bore GI tubing fitting such as union, elbow, tee, reducer, socket etc complete all as specified and as directed.

Supply only in replacement 15mm bore CPVC fitting and brass threaded fitting such as union, elbow, tee, reducer, socket etc complete all as specified and as directed.

Supply only in replacement white, vitreous china, wash down water closet (Pedestal pattern) (EWC) complete with connection to single syphonic action type flushing cistern and fixed in floor with brass screws complete all as specified and as directed.

Supply only in replacement Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply only in replacement wall hung WC of size 355 x 545 x 410 mm with soft close seat cover, Hinges, Accessories Set, complete all as specified & directed. Make : Jaquar Cat No: FNS-WHT-40951UF or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair Floor mounted coupled WC Bowl With Cistern For Coupled WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting and Fixing Accessories And Accessories Set, Size: 365x630x750 mm, S Trap-220 mm/P Trap-180mm complete all as specified & directed. Make : Jaquar Cat No:FNS-WHT-40751S220UFSMZ or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement Table top wash hand basin of size 595 x 435 x 185 mm complete all as specified & directed. Make : Jaquar Cat No.: KUS-WHT-35901 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses complete all as specified & directed. Make : Jaquar Cat No.: CON-169KNB or equivalent model of GROHE/KEROVIT (Kajaria)

S&F CP brass 32 mm dia waste coupling of 130mm height for WHB complete all as specified & directed. Make : Jaquar Cat No.: ALD-709L130 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement CP brass 32mm bore bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & Wall flanges complete all as specified & directed. Make : Jaquar Cat No.: ALD-769L 300x190 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement 600mm long braided hose with two 15mm nuts & O-ring rubber washer complete all as specified & directed. Make : Jaquar Cat No.: ALD-801B or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement CP brass hand shower (health faucet) with 8mm dia 1.20m long flexible tube & wall hook complete all as specified & directed. Make : Jaquar Cat No.: ALD -573 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement 15mm bore CP brass 2-Way Bib Cock with wall flange complete all as specified & directed. Make : Jaquar Cat No. : CQT-23041 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement stainless steel toilet paper holder with Flap recessed type complete all as specified & directed. Make : Jaquar Cat No. : AHS -1553 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement slim concealed cistern with floor mounting frame, installation kit and 'S' type drain pipe connection set for wall hung WC (without flushing plate) complete all as specified & directed. Make : Jaquar Cat No.: JCS-WHT-2400FS or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement control plate segment chrome plated flushing plate for concealed flushing cistern complete all as specified & directed. Make : Jaquar Cat No.: JCP-CHR-392415 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement soap dispenser with glass bottle complete all as specified & directed. Make : Jaquar Cat No.: AKP-35735P or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair SS towel rack 600mm long with lower hangers complete all as specified & directed. Make : Jaquar Cat No.: AKP-35781PS or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement Brass CP Wall mixer with Hand shower ø105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System and flexible tube 12mm dia & 1.5M long with nuts complete all as specified and as directed,.Make : Jaquar Cat No.: FLR-5267N, HSH-1717 & SHA-549D12 or equivalent model of GROHE/KEROVIT (Kajaria)

Supply only in replacement 15mm bore CP brass Angular stop cock with wall flange complete all as specified & directed. Make : Jaquar Cat No.: ALI-85053 or equivalent model of GROHE/KEROVIT (Kajaria)

Dismantling water tanks exc 500 & n exc 1000 ltr capacity and removing to store complete all as specified and as directed.

Supply only in replacement 750 ltr Rotational moulded Polyethylene water storag tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed.

Supply only in replacement 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Disconnecting existing tanks, setting aside for repairs including cleaning and removing all scale and dirt, etc from tanks and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Supply only in replacement 6mm thick designer looking mirror including SS brackets of approved shape & size complete all as specified and as directed.

M&L cleaning and removal of mud / silt, plastic waste, poly packs and foreign material accumulated in the strom water drain/culvert upto 1.50 metre depth around the periphery of Cab Sectt Building premises and inside the main building by manual or mechanical means & disposal of the waste material outside the building premises in the MCD low lying area by private vehicle as and when directed complete all as specified and directed.

Supply only in replacement plastic soft close water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as specified & as directed. Make : Jaquar/ Hindware /Parryware / GROHE

M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cement mortar 1 : 3, width exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregates) in floors complete all as specified and as directed.

M&L for coloured, Digital printed, glazed ceramic wall tiles of size 300mm X 450mm x 7mm thick as in vertical surfaces, set and jointed in neat cement slurry with spacers and pointed in epoxy tile grout to match the shade over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured digital printed ceramic non skid tiles, area of tiles exceeding 0.11 sqm but not exceeding 0.36 sqm and 7 to 8 mm thick, laid in floors with spacers, set and jointed in neat cement slurry, pointed in epoxy tile grout to match the shade over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Supply only in replacement 15 mm bore galvanized steel tubing medium grade complete all as specified and directed.

Supply only in replacement 20 mm bore galvanized steel tubing medium grade complete all as specified and directed.

Supply only in replacement of CPVC pipes SDR 11 , 20mm outer dia complete all as specified.

All as per item No 90.00 here in before but 25 mm outer bore of pipe complete all as specified and as directed.

Supply only in replacement 20mm bore CPVC gate valves (brass insert) as per requirement of site complete all as specified and as directed.

Supply only in replacement 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring, jointing with solvent cement or adhesive laid in trenches or in floor complete all as specified and directed.

All as per item No 93.00 here in before but 110 mm bore pipe withPVC (SWR) clamps complete all as specified and as directed.

Supply only in replacement PVC (SWR) floor traps 75mm dia out let, with CP grating including jointing to pipe with solvent cement or adhesive complete all as specified and as directed.

Supply only in replacement 110 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

All as per item No 96.00 here in before but 75mm bore bend complete all as specified and as directed.

All as per item No 96.00 here in before but plain bends for 110 mm bore pipe complete all as specified and as directed.

All as per item No 96.00 here in before but plain bends for 75mm bore pipe complete all as specified and as directed.

Supply only in replacement 110 mm bore PVC (SWR) branch pieces single, equal or unequal, provided with oval access door with solvent cement or adhesive complete all as specified and as directed.

All as per item No 100.00 here in before but 75 mm bore complete all as specified and as directed.

Supply only in replacement 32 mm bore PVC (SWR) pipe single socketed in any length with rubber ring jointing with solvent cement or adhesive laid in floor or fixed to walls with PVC clamp complete all as specified and as directed.

Taking down chowkhats or frames area not exc 1.5 Sqm each, with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhats or frames area exc 1.50 Sqm but not exc 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as specified and as directed. Make:- Rajshree / Sintex

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing complete all as specified and as directed.

S&F aluminium anodized ‘D’ type handles 125 mm complete all as specified and as directed .

S&F 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 100 mm butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and as directed.

S&F powder coated aluminium window using 63mm X 38mm X 1.6mm chowkhats with 45mm X 45mm X 1.6mm openable section as in shutter including 4mm thick glass panes of approved make with aluminium beading & rubber packing for fixing glass and including powder coated builder hardware such as aluminium handles 100mm - 02 Nos, tower bolts 100mm 02 Nos, hooks and eye - 02 Nos (150mm long), butt hinges 100mm- 04 Nos etc complete all as specified and as directed. (Make of glass- Modi float/Atul). Note:- Aluminium door/ window / ventilators to be fixed with chromium plated screw not more than 600 mm C to C & sealing the joints between frames & granite with polysulphide sealant as per the manufactures instruction". The rate deemed to be included in unit rate quoted.

S&F powder coated aluminium window/ventilator fix type using 63mm X 38mm X 1.6mm frame work with 4 mm thick fixed frosted glass including aluminium beading & rubber packing for fixing glass complete all as specified and as directed. Note:- Aluminium door/ window / ventilators /partition to be fixed with chromium plated screw not more than 600 mm C to C & sealing the joints between frames & wall/granite/kota stone with polysulphide sealant as per the manufactures instruction". The rate deemed to be included in unit rate quoted.

S&F powder coated of any colour aluminium frame, with partially glazed shutters, single/ double leaf divided into two panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass/ACP as directed complete all as specified and as directed. The frame and shutter will be made out of the following sections:- (a) Aluminium anodised door frame 63mmx44.45mmx1.60mm fixed with aluminium trust bolt in walls by drilling as directed (b) Aluminium anodised side rail of shutter section 85mmx44.45mm x1.6mm (c) Aluminium anodised top rail of shutter section 114.30mmx44.45mm x1.6mm (d) Aluminium anodised middle rail of shutter section 83.5mmx44.45mm x1.6 mm (e) Aluminium anodised bottom rail of shutter section 101.60mmx45.45x 1.60 mm (f) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf of Make Classic/Argent as approved. (g) Aluminium anodised handle 250 mm long of approved Make Classic / Argent 02. No’s in each leaf. (h) Glass Pane shall be 4 mm thick tinted/plain glass. (j) 4mm thick Aluminium Composite Panel as per approved colour and pattern and lock including complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) in platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing complete all as specified & as directed.

Supply only in replacement 125 mm brass polished butt hinges type B12 complete all as specified and as directed.

Supply only in replacement door closer hydraulically regulated, design No 3 universal type, cast iron body, suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 Kg each complete all as specified and as directed. Make : Godrej/Ozon/Hardwyn

Supply only in replacement brass mortice lock 65 mm 6 lever vertical type with triplicate key and handles set complete all as specified and as directed. Make – Godrej / Harrison/Plaza

Supply only in replacement night latch complete with triplicate key, 7 lever, size 98 mm x 67 mm x 28 mm complete all as specified and as directed . Make – Godrej / Harrison/Plaza

Supply only in replacement handle set for mortice lock complete all as specified and as directed.

Supply only in replacement Finger plates 200 to 300mm long and 80 to 100mm wide fixed with brass chromium plated screws complete all as specified and as directed.

Supply only in replacement Kicking plates, any size, of galvanised iron sheet 1 mm thick, fixed with galvanised screws complete all as specified and as directed.

Supply only in replacement aluminium alloy body door stopper, double legged, 150 mm size complete all as specified and as directed.

Supply only in replacement aluminium anodized ‘D’ type handles 125 mm fabricated type complete all as specified and as directed.

Supply only in replacement 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply only in replacement 150mm size brass door stopper complete all as specified and as directed.

Supply Only in replacement 250 mm aluminium alloy, anodised sliding door bolt with hasp staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply only in replacement Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. compete all as specified and as directed.

Supply only in replacement Aluminium door Pivots with plate size 25mm x 65mm suitable for 35mm thick shutter complete all as specified and as directed.

Supply only Cement ordinary portland, portland pozzolana or portland slag.

Supply only sand for plastering/concrete complete all as specified and directed.

Supply only bricks, common brunt clay building bricks sub -Class B-designation 75.

Supply only white cement in packing complete.

Supply only Vitrified Ceramic Tiles 9 to 10mm thick, area of each tile not exc 0.36 sqm of light shade complete all as specified and as directed.

Supply only glazed ceramic tiles 6 to 7mm thick of size 350x250mm / 450x350 mm complete all as specified and as directed.

Supply only in replacement 4mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beading in square exc 0.5 Sqm in each pane complete all as specified and directed.

Supply only in replacement 4mm thick figured glass pin headed type, ordinary quality and glazing with oil putty or rubber beading in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

Taking down door shutters of any description exc 1 sqm and n-exc 2 sqm each complete all as specified and directed.

S&F 35 mm thick flush shutter solid core construction with block board core and plywood face panels with decorative face veneers both faces with lipping complete all as specified and directed.

Supply only in replacement for 12 mm thick plywood grade BWP type BB fixed with screws to timber frame work complete all as specified and directed.

Supply only in replacement 3mm thick teak plyboard with teak face veeners on one face on the existing woodwork complete all as specified & directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete for aluminium door complete all as specified and directed.

S&F in repair Aluminium mortice lock vertical type 100mm size 4 levers for aluminium door with duplicate keys complete all as specified and directed.

S&F pre-laminated PVC rigid foam sheet wall panelling of 5mm thick stuck on inner frame work of 35mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should to be placed vertically at equal intervals of 600 mm c/c. The PVC strips to be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners including dismantling of old wall panelling of any description complete all as specified & directed. Make-Rajshree/Sintex

S&F mineral fibre ceiling boards 15 mm thick 600 mm x 600 mm size including grid 25 x 25 x 1.6 mm thick GI powder coated wall angles and 25 x 35 x1.6mm size T runner suspended at 1200 mm c/c and cross T runner of 25 x 35 x 1.6mm size suspended at 600 mm c/c supported by 4 mm GI rod from roof / slab including wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600 mm x 600 mm ceiling etc including dismantling of old false ceiling of any description complete all as specified and directed.

M&L for GI metal false ceiling lay in plain regular edge white color tiles of size 595X595X0.5mm thick with 8mm drop made of GI sheet having galvanizing of min 120 gms/sqm (both side inclusive ) & electro statically polyester powder coated of thickness 60 microns(min) including factory painted after bending ceiling grid shall be following min sizes: main T section(24X38X0.3mm 3m long), Cross T section (24X25X0.3mm 6m long), wall angle (24X24X0.3mm 3m long), hanger rod 4mm dia, Adjust clip (85X30X0.8mm), soffit cleat (27X37X25X1.6mm), Dash fastener (12.5 mm dia) with complete including dismantling of old false ceiling of any description complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

S&F Vitrified Ceramic tiles of any colour 8 mm thick (square/ rectangular) double charged, area of each tiles not exceeding 0.36 sqm, in floors/ wall as in skirting etc. fixed with adhesive of fevimate-XL resin mortar Make- Pidilite or equivalent as approved by GE complete all as specified & directed by Engr-in-Charge.

M&L for scraping and cleaning of Wooden doors / wall panelling to remove existing polish, filling putty or the required hardeners for repairing of any wooden marks, scratches or scars and treated with putty /primer to obtained similar texture and mallamine coating on the surface with approved shade and make (MRF, Berger, Asian) on the surface doors to obtain smooth and uniform looking as complete all as specified and directed.

Taking down unserviceable venation blinds any type /description and in any position (horizontal / vertical) along with the top rail complete all as specified & directed by Engr-in-Charge.

S&F vertical venation blinds of special collection, self adjusting system of louvers, size 100mm wide (as approved by GE) with aluminium top rail & PVC bottom, weight attached with 100 mm strip with chain operation complete all as specified and directed by Engr-in-Charge. (Make : Vista/ Marvel / Hunter Douglas)

S&F roller blinds of any size and any colour (non- black out series) with aluminium headrail, with chain operation complete all as specified and directed by Engr-in-Charge. (Make : Vista/ Marvel / Hunter Douglas)

S&F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

SETHI ENTERPRISES (BID ID -3108942)

R R Associates (BID ID -3099968)

VINAY ENTERPRISES (BID ID -3107566)