Repair renovation and day to day maintenance of Government residential building offices in and around Leh of RnB Division Leh for the period of one year

Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Painting with synthetic enamel paint of approved brand ' " and manufacture of required colour to give an even shade:One or more coats on old work.

Rough cast paster up to 10 m hight above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size dashed over and including the freash plaster in two layers,under layer 112 mm cement plaster 1:4(1 cement: 4 coarse sand)and top layer 10 mm cement plaster 1:3 (1 cement :3 fine sand mixed with 10 % finely grounded hydrated lime by volume of cement (Ordinery cement finish using ordenary cement)

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1 Osqm

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying plaster of paris putty of a)2mm thickness over plastered surface to prepare the surface even and smooth complete

b) 6mm thickness over plastered surface to prepare the surface even and smooth complete double layer

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer's specifications.Two or more coats on new work

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : In mud mortar

Providing and laying of Sundried brick masonary and carriage with complete job.

Supplying and stacking of good earth at site, excluding carriage.

Providing and laying of crusher dust mixed with cement 10% for roof treatment including carrige all complete job.

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil

Dry random rubble masonry with hard stone in foundation and plinth: Using quarry stone with bond stone.

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1-1/2:4 ( 1 cement : 1-1/2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Centring and shuttermg including strutting, propping etc. and removal of form for· a) Suspended floors, roofs, landings, balconies and access platform.

b) Retatning walls. return walls. walls (any thickness) including attached pilasters. buttresses. plinth and strmg courses fillets et

Edges of slabs and breaks in floors and walls.Under 20cms wide

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. 610 x460mm bowl depth 200mm each

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) (A) Crushed

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. (a) Crushed

Renewing glass panes, with wooden fillets wherever necessary : Glass panes weighing 10 kg I sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. a) 500 ltr

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1 ), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with: Decorative veneer facings of approved manufacture

Providing and fixing wooden moulded corner beading of triangular shape to the junction of panneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete . Second class kail wood

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed w~th C. P. brass screws and wooden plugs, etc. wherever necessary complete 12 mm dia

Providing and fixing magnetic catcher in cup board/ward robe shutters including fixing with necessary screws etc. Complete (Best make of approved quality) Double strip (Horizontal type)

Providing and fixingtongue and grooved interlocking type wooden panelling eith necessary screw with complete job as per the drection of engineer in charge.

Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 100 mm

Providing and fixing of materials for the Insulation of pipe with nitrile tube,trpping,with cello tape,rockwood 6 inch per side, wire mesh,polythene,taping with eello tape aluminium sheet 26 gauge cladding with dia of 2'-0"complete job.

Providing and fixing of materials for the Insulation of SINTEX of 500 ltr with nitrile tube,trpping,with cello tape,rockwood 6 inch per side, wire mesh,polythene,taping with cello tape aluminium sheet 26 gauge cladding with dia of on contract basis complete job. 500Ltr

Providing and fixing of electric gyser of 35 liter of approved brand with ISI mark.

Providing and fixing white vitreous chine pedestal for wash basin completely recessed at the back,for the recption of pipe and fitting.

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete: 10 litre capacity -White

Providing and fixing G. I. inlet connection for flush pipe connecting with W.C. pan.

Provding and fixing easte pipe for sink or wash basin including PVC wast fitting complete 40 mm dia

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 1500x450 mm

Providing and fixing toilet paper holder. C.P. brass

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropytene random fitings1/C fixing the pipe with clamps at 1.00m spacing. This includes testing of joints complete as per direction of Engineer-in-charge. (Internal workexposed on wall) Pn-16 pipe, 25mm 00

Pn-16 pipe, 32mm 00

Pn-16 pipe , 40mm 00

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) 20.74 pipes havmg thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this included jointing of pipe and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge. (External work) 100 mm nominal inner dia pipes

150mm nominal inner dia pipes

Providing and fixing of PVC P trap fpor water closet having density of 10 Kg/ m2 including solvent all complete.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions.

Providing and fixing of spray jet having conformed quality as per te drection of site engineer.

Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated 'J' or 'l' hooks, bolts and nuts 8mm dia. G.l plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS :1285, fixed with dash fastener of required dia.and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, kg 371.95 minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, kg 428.25 minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg I sqm)

Providing and fixing aluminium round shape handle of outer dia 1 OOmm with SS screws etc. Complete as per direction of Engineer-in-charge each 68.85 Anodized (AC 15) aluminium

Providing and fixing 100 mm brass locks (best make of approved quality)for aluminium doors including necessary cutting and making good etc complete

Providing and fixing lSI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 50x37x1.50 mm

Providing anfd fixing of Bress lock with all necessary screw as per the drection of engineer in charge.

Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Carriage of material from source to site by M.T including loading, unloading, complete job. a) Cement an Steel avg lead 02 km

b) Sand an avg lead 15 Km

c) Stone agg an avg lead 15 Km

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : In cement mortar

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : a) 12mm thick

b) 18mm thick

Providing and fixing 2nd class teak wood/ plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface a) 12mm thick

b) 25 mm thick

windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinf!eS bright finished of required size with necessary screws second class Kail/silver wood a) 35mm

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers •. abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills,sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing: 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) including carriage complete job.

Finishing wall with Delux multi surface paint system forinteriors and exteriors using primer as per manufacturers' specifications: Two or more coats applied @ 1.25 litre 1 Osqm over and including one Coat of special primer applied @ 0. 751itre/10sqm.

Providing and fixing ladakhi ornamental wooden shingstak over windows avg height 1"6" complete job.

Thermal Insulation sot roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge. N -normal 50mm thick

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanised with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastner 12.5 mm diax40mm long with 6 mm dia bolts, othP.r flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G. I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, wall/partition with the help of rawl plugs at450 mm centre to centre, with 25mm long drive-all screws@ 230 mm interval ,including fixing of gypsum board to celing section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers' specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge butexcluding the cost of painting with:

Providing and fixing iron mesh 2mmx2mm on wall including screw all complete job

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing bright finished brass handles with screws etc. complete : a) 125 mm

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size.

French spirit polishing with Two or more coats on new works including a coat of wood filler

Providing and fixing aluminium tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge.

Providing and hydraulic door close including all complete job

Wooden planking , tongued and grooved in flooring including fixing with iron screws complete : 12mm thick prelaminated / second class deodar.

Structural steel work riveted or bolted in built up section , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing in wall lining flat pressed three layer (medium density) particular board with decorative laminations (sunmaca of 1mm thick) or graded wood prelaminated one side, decorative laminations other side, balancing lamination Grade I, Type II , IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. including adhesive material , scafolding for false ceiling complete job. 12 mm thick

Providing and fixing 5.5mm thick glass including fixing with wooden bidding nail, complete job.

Providing and fixing 8mm thick glass including fixing with wooden bidding nail, complete job.

Finishing wall with textured paint of required shade on New work (two or more coats applied @3.28litre/10 sqm over and including base coat of eater proofing cement paint applied @2.20Kg/10Sqm

Providing and fixing bright finished brass 100mm mortice latch and lock with 6 levers and a pair of levers handles with necessary screws etc complete (best make of approved quality)

Providing and fixing wooden molded corner beading of triangular shape to the junction of paneling etc with iron screw, plug and priming coat on unexposed surface etc complete job 50x50mm (base & height) 2nd class kail wood

Providing and fixing telescopic sliding channels for drawer including fixing with screw complete job

Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board medium density grade I, IS:3087 marked.

Providing and fixing one side decorative sunmica board including fixing with synthetic adhesive materials

Providing and fixing wooden panneling TNG 4" wide, complete job

Providing and fixing skirting with wooden pannels with necessary fixing arrangements and screw including drilling necessary holes for rail plug etc and priming coat on unexposed surface complete job

12mm thick wooden ready made laminated planking, tongued and grooved in flooring incluging fixing iron screw and 4mm thick thermocol.

Applying priming coat with ready mix pink or grey primer of approved brand and manufacture on wood work( hard and soft wood)

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 75mm

Providing and fixing ISI marked aluminium butt hinges ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required color or shade with necessary screwa etc. complete: (75x45x3.2)mm

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead: of area of 3 sqm and below:

Making the opening in brick masonry including dismantling, fixing chowk hats in floor or walls cutting masonry and fixing holdfasts in cement concrete 1:3:6 (1 cement :3 coarse sand : 6 stone aggregate 20mm nominal size) painting two coats of coal tar to sides of chowk hats and making good the damates to walls and floors complete to match the existing surface for door including carriage complete job

12mm cement plaster of mix 13.1.1 1:4 (1 cement : 4 fine sand) including carriage complete job

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work ( two or more coats) over and including priming coats with cement primer.

Providing wood work in frames of false ceiling, partitions etc, sawn and fixed in position.

Extra for providing lipping with second class teak wood battens 25mm minimum depth on all edges of flush door shelter (over all area of door shelter to be measured)

Extra for providing and fixing flush door with decorative veneering instead of non-decorative IS marked flush door shelter conforming to ISI. 2202(Part 1st)

Decorative ply wood one side docorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type

Providing and fixing local ornamental kaju 10" average length a) 14"

Providing and fixing bright finished brass handles 100mm

Firing/burning of wood to umbrose the grain of wood with LPG gas burner

Providing and fixing aluminium tubular handle 150mm

Wooden planking , tongued and grooved in flooring including fixing with iron screws complete

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tile 10mm to 25mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50m lead: 1:3:6 or richer mix

Demolishing cement concrete manually/by mechanical means including disposal of material within 50m lead: 1:4:8 or leaner mix

supply and filling of broken bricks and other material under the slab complete job

Providing and fixing PVC pipe confirming to IS 4985(class-IV) with all injection moulded fittings viz: elbows, tees, etc jointed with solvent cement, cutting chase and making good the wall in all respect for waste connections. A)PVC 110mm

b)PVC 75mm

Providing and fixing 100mm sand PVC grating for gully, floor or Nahani trap

Providing and fixing white vitreous china pedestal type water closet (European type WC pan) with seat and lid, 10 litre low level white PVC flushing cistern with manually controlled device(handle lever), conforming to IS:7231,Parryware/Hindware/Seabrid/Orient (Coral) with all fittings and fixtures complete including cuttinhgand making good the walls and floors wherever required. WC Pan with ISI marked white solid plastic seat and lid

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Angle 45x45x6

Providing and fixing 600x450 mm bevelled edge mirror of superior glass ( of approved quality) complete with 6mm thick hard copy ground fixed to wooden cleats with C.P Brass screws and washers complete.

Providing and fixing C.P Brass closed hole basin mixer piller tap of approved quality and make, weight not less than 1.970Kg

Providing and fixing water heater gyser 15lt including fixing nut bolt in wall fitting the inlet and outline complete job

Providing and fixing 18mm thick shutters for cupboard etc, including ISI marked nickle plated bright finished M.S Piano hinges IS 3818 marked with necessary screws

Providing and fixing toughened glass 12mm thick including fixing with nut bolt and ss clip every joints complete job

Providing and fixing new board bidding at edge or boarder of table, windows, work station etc complete job

Providing and fixing hydraullic door closer including all required nuts and screw complete job

Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with FP brass screwa with concealed fitting arrangement of approved quality color and make (Prayak or equivalent) 600mm long towel rail with total length of 645 width, 78mm wide and effective high of 88mm, weighing not less than 190gms

Providing and fixing soap dish of C.P brass and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality color and make, weight not less than 105gms (prayag or quivalent)

Providing and fixing bend of required degree with acess door, insertion of rubber wasaher 3mm thick, bolt and nuts complete T bend a) 100mm

Providing and fixing P.trap for English type w.c with washer and m.s claps complete job

Providing and fixing double equal plain junction of required degree a) 75x75x75 pvc as per

b) 100x100x100 pvc as per

Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standard and weighting not less than 690 gms

Providing and fixing insulation K flex 2" dia including joint with adhesive tape complete a) 25mm nominal bore

Making connection of PPR distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 20 to 32 mm nominal bore

Polycarbonate sheet 3 layer

Heat tap Denforsed make

P/F of Sun blocking film, opaque film of various shades & design all complete job.

M/S ISHEY ANGCHOK

M/S TAMCHOS GURMET GOVT CONTRACTOR