REPAIR / REPLACEMENT OF ROOF, PLASTER, JOINERY, PLUMBING AND ALLIED WORKS AT DTF, VTF, 416 ENGR BDE, ICC UNIT AND ADJACENT AREA UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Taking down shutter of any description exc 1sqm but n.exc 2 sqm each complete all as specified and directed

Taking down chowkhat with shutters( without taking of shutters from the frames) not exc 1.5 sqm each complete all as specified and directed

Taking down chowkhat with shutters (without taking off shutters from the frames exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises. complete all as specified and directed

Demolition brick work or stone boulders masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing also sand stone work complete all as specified and directed .

Demolition cement concrete (unrainforced) in ground floors and paving n.exc 15cm thickness (below or above grond level) complete all as specified and directed

Dismantling AC sheet corrugated or semi corrugated sheet including ridges of any description as in roof and including removal from the site complete all as specified and directed.

Demolition wall and ceiling boards (fibre,pulpinsulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed

Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surroundds glazed with putty or fixed with bead. complete all as specified and directed

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square nexc 0.50 sqm each pane complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 10 mm thick rendering on ceiling in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 rendering using ready mix plaster bags on brick/concrete suface of extenal wall finished even and fair complete all as specified and directed Note Contractor is required to deposit ready mix bags for 100% CA quanitity to Engr-in-charge with in 15 days of acceptance of contract.

M & L for preparation new plastered surfaces of walls and apply two coat of oil bound distmper over a coat of primer & chalk whitening & smoothening of surface, complete all as specified and directed.

M &L for preparation new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M & L for Preparation old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash, complete all as specified and directed.

M & L for Preparation old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation new plastered sufaces of walls and applying two coats of Acrylic exterier Emulsion paint using roller for painting complete all as specified and directed

M&L for preparation old plastered sufaces of walls and applying one coat of Acrylic exterior Emulsion paint using roller for painting complete all as specified and directed

S&F 35mm thick plain framed , panelled shutters ( any number of panels ) with panels of timber that on both sides( feather edged) or of veneered particle board medium density ,wood particle board with commercial face veneers. complete all as specified and directed

S&F 35m thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed

S&F steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and ply proofing shutters including guard bars, hinges, peg stay, handles, tower bolts, lugs including treated with for or coal tar black paint on steel surface in contact/embedded in concrete/masonry work complete all as specified and directed Note- Disturbed suface of wall shall be made good to true suface

S&F steel ventilator with tap hung shutter including hinges steel peg stay complete all as specified and directed

S&F powder coating anodised aluminium frame for doors windows ventilaters with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F anodised aluminium door shutters, aluminium sectioin weighing .55kg/m including necessory joining cleats ,glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed

S&F anodised powder coated anodised aluminium window and ventilater shutters fixed type with out sash bar aluminium section weighing .55 kg/m including necessary joining cleat , glazing clips, rubber packing anodised aluminium snap beading, screws etc complete all as specified and directed

S&F 4.8mm thickness sheet glass ordinary quality and glazing with oil putty in square n.exc .5sqm in each pane complete all as specified and directed

All as described in Ser item No. 28 but exc 0.5 sqm in each pane complete all as specified and directed

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor overall length of cover plate 140mm complete all as specified and directed

S&F door closer hydraulically aluminium (extruded section paty) designation No 3, universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed

S&F in repairs mild steel wire cloth, 0.36 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed

S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S tubes for top & bottom rails MS frame shall be covered with head moulded plain colour complete all as specified and directed

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed

S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed

S&F 250mm length of bolt aluminium alloy, anodised sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F aluminium anodised barrel tower bolt of extruded section length of bolt 150 mm complete all as specified and directed

S&F 125mm aluminium handles cast type anodised complete all as specified and directed

S&F Brass chromium plated tubular towel rail 20mm dia , D type 60mmlong between flanges complete all as specified and directed

M & L for Preparation new wooden surfaces of any description not other wise described over 10 CM width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and directed

M & L for Preparation old wooden surfaces of any description , not other wise described over 10 CM width or girth and applying one coat of synthetic enamal paint complete all as specified and directed

M & L for Preparation new steel or iron sufaces of any description , not other wise described over 10 CM width or girth and applying two cat of synthetic enamal paint over a coat of red oxide complete all as specified and directed

M & L for Prepration old steel or iron surfaces of any description , not other wise described over 10 CM width or girth and applyuiing one coat of synthtic enamel paint complete all as specified and directed

S & F anodised aluminium snap grid frame work of size 605X605mm for false ceiling complete all as specified and directed

S&F 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed

S&F 18/19 mm thick prelaminated particle board ,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with secrews to timber frame and 5mm thick teak wood beads all round to prelaminated boards including piano type hinges complete all as specified and directed

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh of pitch as decided by Eng-in-charge, support to sign board & fencing post, etc. as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S & F Rolled sections Fe 410 -W (grade E-250) quality A as in main and cross beams, base plates, side supports, hip and jack rafters; purlins, winties where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting member complete all as specified and directed

M&L for granite(of any type) tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with ad mixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

M & L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS : 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigments over 50mm thick compact sand cushion complete all as specified and directed

M & L for 75mm thick cement concrete type B-2, 1:2:4(40mm graded aggregate) as in sub base complete all as specified and directed

S&F in repairs 15mm dia pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered 'Hot or 'cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed

S&F in repairs 15mm dia brass C.P mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed

S&F in repairs 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

All as described in Ser item No 57 but 20mm bore

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F in repairs 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Minimum weight 15mm - 90gms)

S&F in repairs 20mm plug type bib taps, cast iron screwed for iron pipe and fixed complete all as specified and directed

S&F in repairs 15mm bore pillar taps of PTMT any colour high press ure screwed for iron pipe complete all as specified and directed (minimum weight 20mm-92grms)

S&F in repairs 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed (minimum wt 15mm-90grms)

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe(minimum weight 20mm-210grms)

S&F in repairs grating doom 125mm dia with waste holes of PTMT complete all as specified and directed(minimum weight 40 grms)

S&F in repairs towel ring of PTMT fixed with and including C.P brass screws and wooden /plastic cleats complete all as specified and directed.(minimum weight 90 grms)

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F PVC (SWR) 75mm floor trap,plain with grating including jointing with solvent cement complete all as specified and directed

Taking up or down steel tubing 15mm including fittings complete all as specified and directed

All as described in Ser Item No. 69 but 20mm tube

All as described in Ser Item No. 69 but 25mm tube

S&F 15mm GI tube medium grade galvnised with all fittings laid on trenches and wall complete all as specified and directed

All as described in Ser Item No. 72 but 20mm tube complete all as specified and directed

All as described in Ser Item No. 72 but 25mm tube complete all as specified and directed

S&F in repairs 500 liters capacity rotational moulded polythyline water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

All as described in Item No 75 but 1000 liters capacity

S&F in repairs 10 liters capacity PVC valveless syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

Taking down aluminium shutter exc 1sqm but n.exc 2sqm and refixing in the same opening after repair of aluminium shutter such as rubbers gaset, hanging of shutter , setting of shutter in original position etc complete all as specified and directed

S&F in repairs vitreous china half stall urinal complete including providing and fixing plugs beading urinal against wall in C.M 1:2 securing urinal to plugs with and including 60mm long brass screws, painting around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe , grating and union for discharge pipe complete all as specified and directed

S&F in repairs vitreous china squatting pan of pattern "long pan" size 580 x 440 mm white with ‘P’ or S trap, front or back inlet and foot rest any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back size 630X450mm including CP 15mm pillar tap, 32mm CP waste coupling, waste pipe and brackets complete all as specified and directed

S&F plastic multipurpose bath room coloured mirror cabinet of height 54cm , width 35cm and depth 13cm wall mounted complete all as specified and directed

Removal of existing water proofing treadment and providing 15mm thick bedding of cement mortar 1:3 mixed with water proofing compound as per manufactured instruction and applying one coat of bituminous /polymerized primer conforming to IS-3384 @.30 Ltr/sqm and applying one coat of bonding material using blown type bitumen confirming to IS 702 grade 85/25 @ 1.20Kg/sqm and laying APP based polymeric membrance menimum weighting of 3 Kg/Sqm and minimum 3mm thick reinforced with polyster none woven fabric (weight not less than 150 gms/sqm laid primed surface by forced application and applying one coat of aluminium paint over APP membrance complete all as specified and directed

M & L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 300x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution.

M&L for first quality, Non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square or rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, laid in floors set and jointed with neat cement slurry over and including 15 mm thick screed bed on cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed

M&L for joint free vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm laid, in floors etc set and jointed, with neat cement slurry over and including 15 mm thick screed bed in cement mortar (1:6) including pointing in white or coloured cement with pigment to match the shade of tiles, complete all as specified and directed

All as described in ser item No 86 above but on vertical surfaces such as skirting over 10mm thick rendering in cement mortar 1:4 as backing coat complete all as directed by Engr-in-charge.

M&L for vitrified ceremic tiles dark shade /double charged tile 7 to 8 mm thick/ultracharged(square/rectangular) polished , area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm laid in floorsetc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colured tiles over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

All as described in Ser item No 88 but on vertical surface over 10mm thick moulding in cement mortar 1:4 as backing coat complete all as specified and directed

S&F 75mm PVC (SWR)pipe single socketed in any length with rubber ring joints fixed to wall or laid in trenches complete all as specified and directed

All as described in Ser item No 90 but 110mm bore

S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed

All as described in Ser item No 92 but 110mm bore

Taking down eaves gutter and rain water pipe of any size and any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed

M&L for brick work with fly ash bricks straigt or curved on plan exc 6 mean redius built in CM 1:6 complete all as specified and directed

Dismantiling timber scantlings 40 sq.cm and over in section, in any position of unframed work complete all as specified and directed

All as described in Ser item No 96 but in fillets rails ,posts ,rafters ,purline etc under 40 sq.cm in section

S&F stainless steel peg set 8 nos in 45cm length dia of hooks 6mm complete all as specified and directed

S&F in repairs 5 mm thick, sandwich pattern, PVC Wall lining/wall panelling (sandwiched between the longitudinal grid in PVC Sheet) , consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm PVC fillets complete all as specified and as directed. .

S&F pre-painted galvume aluminiun zinc coating GI corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering /cladding to wall fixed with self tapping secrwes complete all as specified and directed

S&F pre-painted galvalme aluminium zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/clading to wall fixed with self tapping screws complete all as specified and directed

S&F 0.63mm thick plain black , mild steel sheeting in wall cladding , steel gates and similar work , cut to size, holes , punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with rivetedor welded seams including bending or turningup mitred angles etc complete all as specified and directed

M&L for machine cut kota stone slab flooring 18-20mm thick over 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed wiht pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

All as described in Ser item No 103 but on vertical surface over 15mm thick rendring as backing coat complete all as specified and directed

S&F in repairs vitreous china white wash down water closet pan (padestal pattern) white one piece wall mounted type (including flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc inclding UF soft closed seat cover complete all as specified and directed

S&F rolled mild steel plate girder or single stanchions built of one beam or channel section with flange plate , caps , bases, spices , angle bracket , cleats and other connection Fe-290 (Gde 165) complete all as specified and directed

S&F in repairs viteress china coloured wash down water closet pan (padestal pattern) one piece wall mounted type (including flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc including UF soft closed seat cover complete all as specifie and directed

S&F in repairs 8mm dia , brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed

veer enterprises

Manglam Engineers and Construction Co

Arun Construction Co.