SPECIAL REPAIR TO BLDG NO E-60OR SINGLE ACCN OF B OF A AND OTHER SANCTIONED WORK UNDER GE WEST FEROZEPUR CANTT

Amount

Dismantling of brick tiles in roof double layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area or specifically ordered by Engineer -in -Charge in writing complete all as specified.

Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area or specifically ordered by Engineer -in -Charge in writing, complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for 15mm thick screed in cement mortar (1:4) on brick/concrete of roof surface finished even and smooth without using extra cement etc complete all as specified.

M&L for 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified.

M&L for applying evenly a tack coat of Industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm incl cleaning surfaces as specified & directed by the Engr-in-Charge.

S&F Polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 bitumen and laid on roof, complete all as specified and directed.

S&F 40 mm thick brick tiles laid over a layer of 25 mm thick mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, complete all as specified.

All as per item No 8 herein before but using old brick tiles retrieved from dismantling (Item No 01 hereinbefore) including cleaning and removal of mortar from tiles. complete all as specified.

Dismantling timber fillets, rails, posts, rafters,purlins, etc. under 40 sq.cm in section complete all as specified.

S&F Mild steel tee sections of Grade Fe-410-W(Gde-E-250) quality- B,fixed independently, without connecting plates, etc.complete all as specified.

S & F 14 to 16 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmx18mmx500mm on tree sides n complete including taking down as fixed in repairs all as specified and directed.all as spd and directed by Engineer in charge.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall , overall size of sink 495mmx420mm, bowl size 410mmx330mmx 160mm as in repair complete all as specified.

Supply & fixing in repair PVC connection 15mm x 450mm size with PTMT nuts. ( Make : Sudhakar/YKB).

Supply & fixed in repairs PVC waste pipe with waste fittings, 32 mm bore size for sinks,WHB etc with long screwed shanks and fly nuts complete all as specified and directed

M&L waste coupling brass CP for glazed sinks, basins etc with long shanks and fly nuts, flange embeded in cement and oehr and fixed 32mm bore.

S&F15mm bore dia Bib tap standard of PTMT any colour high pressure screwed foriron pipe and fixed.(Minimum weight 15mm-90gms/20mm- 125gms). as fixed in repairs and all as specified

s&F 15mm bore dia Fancy type Pillar taps of PTMT any colour high pressurescrewed for iron pipe and fixed.(Minimum weight 15mm-110gms) as fixed in repairs all as specified.

S&F 15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)

M&L waste coupling brass CP for glazed sinks, basins etc with long shanks and fly nuts, flange embeded in cement and fixed 32mm bore.

Raking out joints/ pointing to brick tiles (30cm X 15cm) work in cement mortar laid flat as in floors, roofs, ceilings, chajjas, etc. etc complete all as specified and directed.

M&L for Flush pointing to brick tile in roof with cement mortar (1:3) complete all as specified.

M&L Plain Cement concrete (1:2:4), type B-0 using 20mm graded stone aggregate min radius of 75mm tk as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including form work complete all as specified.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.

M&L for external rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even complete all as specified.

M&L for internal rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

M&L for removing loose and broken concrete by chiseling/picking etc upto a depth of 20 to 40mm from floor/roof slab and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50m all as specified and directed by Engineer-in-Charge, including necessary scaffolding etc complete.

M&L for applying one coat of anti corrosive primer as per manufacturers insturctions to exposed old and new reinforcement to the full circumferences and length of bars to form unbroken 40micron thick film in the area prepared vide item (8) above all as specified and directed by Eng-in-Charge. Make : Fosroc (nitozine primer) or equivalent in MC Bauchemic/S.Beck

M&L for application of high build polymer modified to ceiling of mortar 40mm thick in two layers to surfaces a coat of bonding agent in the ratio of (1: 3) Cement mortar for Plaster @ 4 Kg SBR per bag of cement appled as per manufacturer's instrutions.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises as directed by the Engr-in-Charge

M&L for Designer non skid coloured ceramic tiles (light shade with dark shade boder as approved), of size 400X400 of 7 to 8 mm thick, as in flooring set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

S&F of Glazed coloured and cereamic tiles in vertical surfaces 300X200X7mm / 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed

M&L for Designer Glazed ceramic tiles, coloured (light shade with dark shade boder as approved), of size 300X200/300x450 of 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over and including 10mm thick backing in cement mortar (1:4) complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing in steps tread portion. complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 41.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item 44 above here-in-before but using old bricks retrieved from demolition under item 43 here in before including cleaning and removal of mortar from old bricks.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified..

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and removing from site.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in the same opening.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

M&L for Cutting holes in brick wall exc half bricks but not exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified.

Dismantling wrought iron or mild steel work in any position complete all as specified and directed

S&F for framed work such as grills grating etc with ends of bars shoulders ans or riveted, or forged in to spikes: framed guard bars barred iron doors ladders framed balusters walk way railing framework of water cooler stand , angle iron in stair steps, iron gate and similar work conforming to fe 290.Gde E-165

M&L for forming jambs etc built in cement mortor 1:6 to openings incl cutting toothing and properly bonding into to old work also facing ,jointoing and pointing to match to existing work complete all as specified.

M&L for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified.

S&F factory made Pressed steel frames made of 1.25 mm thick MS sheet of profile 105 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item No 58 hereinbefore but size of profile 125 mm X 60 mm, complete all as specified.

S&F factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F factory made 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats.

S&F factory made 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR plywood size of members as specified in clause 8.20(a) of MES Schedule Part-I section-8 complete all as specified.

S&F in Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

M&L in repair, 2nd class soft wood fillets, sectional area exc. 3 sqcm and n exc 6 Sqcm, rectangular or triangular in section, wrought finished, fixed with PVC rawl plug & steel screw complete all as specified.

S&F 3.15mm dia plain mild steel wire, galvanised class 3 as for mosquito nets and fixing to straining bolts, hooks, eyes, etcincluding straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured)

S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane complete all as speciifed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as speciifed.

S&F in repair 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified.

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site complete all as specified. Make: Rajshri or equivalent as approved.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified.

S&F Extruded Aluminium alloy tower bolt of 200mm length of bolt and fixed with screws, complete all as specified.

S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodized and fixed with screws complete all as specified.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 300 mm Mild steel helical door spring including roller and roller plate complete all as specified.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M&L a fillet of 75 mm size shall be provided using PCC (1:2:4) type B1 (using20 mm graded aggregate) mixed with WPC @3% weight of cement content at the junction of vertical and horizontal surfaces of the sunken portion. Note: WPC Measured and paid seperately

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid after Applying bituminous primer @ 0.30 Kg per Sqm over plastered surfaces of sunken slab including verticle surfaces (i.e sunken slab cleaned throughly to remove all loose particle dust/dirt particle ) with over laps of 100mm The over lap shall be sealed by flames or as per manufacturer instruction.Hot blown bitumen grade 85/25 @1.2kg/Sqm applied over the membrane should be compatible with membrane all as recommendation manufacturers and all as specified and directed.

M&L PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion

M&L 30mm thick PCC(1:2:4) using 20mm graded aggregate as in floor finished without using extra cement.

S&F galvanised steel pipe medium grade 40mm bore as in spout of sunken projecting 15cm beyond the face of wall complete all as specified and directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No.88 here in before but 20mm dia.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

S&F in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.

S&F in repair, 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F in repair, 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F PVC Connection pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe as in repair complete all as specified.

S&F Soap dish of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engr-in-Charge.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size PVC waste pipe, angle iron/cast iron brackets of required size complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.

S&F Self-closing tap for urinal, cast copper alloy 15mm bore, chromium plated, screwed for iron pipe and fixed complete all as specified

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Complete all as specified and directed.

S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.(Make : Prince, Kissan, Finolex or equivalent)

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. (Make : Prince, Kissan, Finolex or equivalent)

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

S&F PVC (SWR) vent cowl, for 110mm bore pipe complete all as specified.

S&F 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall (Make : Prince, Victus, Finolex & Supreme) complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.

S&F in repair, 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.

S&F in repair bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated.

S&F in repair 15mm stop valve cast copper alloy with crutch or butterflty handle, screwed down for iron pipe or brass ferrule fancy type chromium plated with long shank and cup (Concealed type).

S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup.

S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt190gms)

S&F in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe.

M&L for cement base paint in one coat on old plastered surfaces of walls including preparation of surfaces complete all as specified.

M&L for White wash in two coats on old plastered surfaces of walls including preparation of surfaces complete all as specified.

M&L for White wash in one coat on old plastered surfaces of ceiling including preparation of surfaces complete all as specified.

M&L Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper, over a coat of wall care putty, and a coat of primer, complete all as specified and as directed.

M&L for Preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified.

M&L for Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for Preparation of old wood or wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on already prepared old wooden surfaces complete all as specified and directed.

M&L for prepration of old painted plastered surfaces of any description over 10cm girth or width, not otherwise describe and applying one coat of synthetic enamel (one tint) paint.

Writing letters or figures (Block, Roman, Italic or Indian) n. exc 30cm high with synthetic enamel paint including cleaning and preparation of surfaces complete all as specfied and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as direced by Engr-in-Charge.

Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soill, complete all as directed by Engr-in-Charge.

Removing excavated material as soil exc. 50 m and depositing where directed at a level n.exc. 1.5m above the starting point, complete all as directed.

M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as directed by Engr-in-Charge.

Formwok to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 thick (Horizontal or sloping) complete all as specified.

M&L Reinforced cement concrete (nominal mix 1:1.5:3) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in chelves

M&L for RCC type B1, 1: 1.5 :3 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as directed by Engr-in-Charge.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

S & F mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required including cranking, bending spirally or hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.

S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

S&F of rolled mild steel as in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. conforming to Fe-410-W (Gde E-250) quality A.

S&F rolled mild steel section of grade FE-410W (Gde E 250 quality A ) as in steel post/pillars of any shape (rectangular /circular/ square where connected to roof/ truss etc fixed with angle cleat, base plate etc.

S&F rooled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachement of Gde Fe-410 S complete all as as specified.

S&F Mild steel screw bolts of 12 mm dia (machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 15cm and n exc 22.5cm long complete all as specified

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

All as per item NO : 153, but 0.80mm thick plain sheet in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 all as specified and directed.

S & F in rep of Gypsum Board 8mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge.

S & F machine pressed precast 60mm thick interlocking paver block (M-35) cement concrete tiles (Coloured) of approved design & pattern as approved by GE, set over & including 50mm sand cushion complete all as specified and directed.

M&L sand filling under floors or in foundation or cable protection including watering and consolidation complete all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

M&L for Moorum/red bajri filling in floors or pavings, laid in layeres n.exc. 15 cm thick, spread, levelled and reammed including watering, complete all as directed by Engr-in- Charge.

M&L for Hard core using broken bricks of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.

M&L 50 mm thick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as directed.

M&L PCC 75 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as directed.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in flooring set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for Glazed ceramic tiles, coloured (light shade with dark shade boder as approved), of size 300X200/300x450 of 7mm thick on vertical surfaces such as in dado set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over and including 10mm thick backing in cement mortar (1:4) complete all as specified.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

S&F 150mm size, extruded aluminium alloy handles, fabricated type, anodized and fixed with screws complete all as specified.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F in Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified.

S&F Vitreous China Urinal, Half stall type, whiteUrinal, bowl type or half stall pattern, basin with pvc coupling 32 mm dia bore including connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F 15mm bore pillar tap long body, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F CP Bib tap of cast copper alloy brass 15mm bore, with crutch or butter fly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC connection pipe heavy duty 45cm long with brass nuts, rubber washers for 15mm dia iron pipe,unions stop cocks etc complete all as specified and directed.

S&F CP fancy type 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule with fancy shank and cup.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wdn/plastic cleats.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.

S&F PTMT handle 150mm long fixed with steel screws complete all as specified.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

S&F 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L Complete Removal of existing treatment of walls applying two coats of cement based paint over one coat of cement primer on plastered surfaces all as specified and directed.

M&L for Washing, rubbing down and stopping of old treated distempered and painted surfaces of walls and applying one coat of cement base paint complete all as specified.

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices.

S&F 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair.

Dismantling plain or corrugated sheet/fibre sheet on roof covering complete all as specified and directed.

Dismantling PVC pipe including clamps complete all as specified.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Dismantling structural steel work framed truss etc.

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.

M&L Reinforced Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6. Note: Reinforcement will be measured and paid seperately.

M&L for cutting into existing manhole for connecting new drains of internal dia 150mm , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete M-15 grade, smooth finished and reforming benching as required.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors ,etc.

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including existing rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Item No 202 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

Supply & Fixing Switch piano flush type 15 amps, single pole one way complete all as specified and directed.

Supply & Fixing Socket outlet 2 in one , 5/6 Amps flush type complete all as specified and directed.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked.

Supply & Fixing ceiling rose, PVC/Polycarbonate, isolated three terminals.

Supply & Fixing Lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings. Including 10 W LED lamp complete all as specified and directed.

Supply & Fixing step type regulator Piano switch type ( 5 step) for ceiling fan 1200/1400 mm size 230 volts, 6 Amps.

Supply & Fixing LED tube light fitting 18 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

All as item No 215 above but SPN DB's 4 way.

Supply & Fixing MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified.

Supply & Fixing MCB, Single pole 240 V,6 - 32 Amps 10 KA 'B Series.

Supply & Fixing MCB, Single Pole and neutral 240 V, 63 Amps 10 KA 'B' series.

Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series.

Supply & Fix in repair sub main wiring of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 6.0 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

Supply & Fix sub main wiring of 4 Sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 Sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two single core 4 Sqmm cable and one single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core.

M & L sub class B bricks locally available of size 22x11x7.5 cm laid dry width wise acrose the line of cable in trenches for protection of UG cable

M&L Mild steel galvanised iron pipe light grade (ISI marked) 50mm bore for passing of cable laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.

M&L Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of cable laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core.

Supply and lay pipe galvanized, “Medium grade”, including fittings 25 mm dia.

All as per item No 231 but 20 mm dia.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

S & F MCB single pole 240 volts, 40 Amps, 10 KA braking capacity complete all as specified.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core

Suplying and fixing 1100 volts grade heavy duty 16 Sq mm two core cable PVC insulated aluminium stranded conductor, served with inner shething of PVC sheeathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4Sq mm suspension wire, one twin core cable flat or circular

Marwaha Builders

Dee Kay EnterPrises