GE(S)/M-47/2022-23

Amount

M&L Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance n. exc. 50m in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation mass concrete etc., complete all as specified and directed.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for mild steel screw bolts 5mm to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only chain link MS galvanisd medium coated as per IS 4826 fencing 75mmx75mm mesh and 3mm dia of wire, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out, complete all as specified and directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L brick work with fly ash of old size (Crussing strength not less than 75 kg/sqm) bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) in pedestal/coping including necessary weathering and form work etc complete all as specified and directed.(Note : Volume of pole/strut shall be deducted for the purpose of payment).

M&L for 15mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of external wall and applying two coats of cement base paint including curing before and after, including a coat of alkali-resistant priming paint complete all as specified and directed.

M&L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde E- 250) quality A complete all as specified and directed.

M&L for 1.6mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed.

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

S&F for 10mm thick transparent toughened glass with rubber packinbg fixed to wall opening with metal frame complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregates) as in sub base for pavement floor complete all as specified and directed.

M&L for 75mm cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregates) as in plinth protection and similar works including finishing the surface of concrete topping even and & fair without using extra cement complete all as specified and directed.

M&L for 25mm cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregates) including finishing the surface of concrete topping even and & fair without using extra cement complete all as specified and directed.

M&L for Broken stone or boulders Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surfacecomplete all as specified and directed.

S&F tubular framed steel trusses made out of MS medium grade tube (ERW or induction butt welded) upto 60mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, gutter or straight flashings etc. fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in ridge/valley , gutter or straight flashings etc. fixed with self tapping screws complete all as specified and directed.

M&L for 10mm thick vitrified ceramic 'light shade' colour tile (Square or Rectangular), polished, area of each tile not exc 0.36 Sqm (Joint free) as on floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including bedding layer of 15mm thick in CM 1:6 to receive tiles complete all as specified and directed.

M&L for 10mm thick vitrified ceramic 'light shade' colour tile (Square or Rectangular), polished, area of each tile not exc 0.36 Sqm (Joint free) as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.

Taking down street light fitting or flood light fitting any type and rating from poles, walls or any other indicated situation/location after disconnecting electrically. seggregating serviceable and unservicable fittings, keeping aside serviceable for reuse and removing unserviceable from site complete all as specified and directed.

S&F in replacement of old un-serviceable street lights fitting with new LED street light luminaire of capacity 60 Watt made of pressure die cast aluminium housing, optical compartment covered with heat resistant toughened glass and IP66 protection for optical compartment and control gear compartment. the LED street light shall be top maintainable for easy maintainance. LED street light shall use multiple LEDs to get sufficient light output as per IS standard from luminiare lumen temp 5700 K. The LED stree light shall be of integral type including one No of LED security and electric driver shall be same make and capacity. The input voltage range shall be 150V to 270V. The LED driver shall be of isolated type with constant current constant voltage topology to ensure optimum driving of LEDs. The LED street light shall have power factor more than 0.95. Luminaire shall be duly numbered with CA No before installation complete all as specified and directed.

Supply and fixing of 200W LED Flood light luminair LED flodd light shall be made up of Pressure Die Cast aluminum housing with black epoxy polyester powder coating for long life. The luminaire shall be complete available CCT 5700K, IP66 for Optical Compartment and Control Gear Compartment.The Optical compartment shall be covered with heat resistant toughened glass for safety.The LED Flood light should be top maintainable for easy maintenance.LED Flood Light shall use multiple LEDs to get sufficient light output from the luminaire. The LED Flood Light shall be of Integral type. The Input voltage range shall be 150V to 270V. The LED Driver shall be of isolated type with Constant Current Constant Voltage topology to ensure optimum driving of LEDs. The LED Flood Light shall have power factor more than 0.95 complete including suitable size cross arm with clamp 02 Nos of size 25mm x 4mm, nuts, bolts and washers etc for fixing of flood light on the pole with help of clamps and nuts, bolts complete all as specified and directed.

Note for srl item No 33 & 37 above 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 5 years guarantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for replacement/repair. 11. CA No. shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.

S&F in replacement of pole mounted street light factory fabricated junction box of size 260 x 160 x 250 mm mm of approved make and of appropriate size made out of 3.15 mm thick CRCA powder coated sheet , including 63A ,Three Phase four wire having four no.AL Bus Bar including 6A SP MCB. The box should have auto Door Lock facility with magnetic Lock having size box fixed on pole using necerssary fixing arrangement such as MS clamps of size 32x6mm,nut,bolts and washer including taking down existing junction box of any description/type etc complete all as specified and directed.

S&F of pole mounted street light factory fabricated junction box of size 300 x 100 x 80 mm mm of approved make and of appropriate size made out of 2 mm thick CRCA powder coated sheet , including 63A ,Three Phase four wire having four no.AL Bus Bar including 6A SP MCB. The box should have auto Door Lock facility with magnetic Lock having size box fixed on pole using necerssary fixing arrangement such as MS clamps of size 32x6mm,nut,bolts and washer etc complete all as specified and directed.

Supply, installation, connecting electrically and testing of street light panel box complete with and including Astroonomical timer ,contactor rating 65 Amp, MCB 63 A TPN complete for mounted made out of CRCA sheet 2 mm thick, powder coated, having provision for Astronomical Timer, Contactor, Toggle switch, SP MCBs and MCCBs surge protection device alongwith protection over current over voltage etc. having self closing door lock complete with fixing clamps of size 50x6mm or mounting arrangement all as required at site, specified or directed including taking out existing U/S street light switch any type and size complete all as specified and directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable 23cm thick (8cm before laying & 15cm after laying cable) including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.

M&L in replacement for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.

M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated , armoured heavy duty electric cable , with aluminium conductor of size 10 Sqmm x 2 core including taking out existing cable from trenches or fixed to wall/pole or passing through ducts or pipe of any size, any core, including taking down unsv cable complete all as specified and directed.

Supply and laying, jointing and testing in trenches, on poles/wall XLPE insulated & PVC sheathed armoured heavy duty electric cable with aluminium conductor 1100 volt grade of cross sectional area 10 Sqmm x 2 core complete all as specified and directed.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated , armoured heavy duty electric cable , with aluminium conductor of size 16 Sqmm x 2 core including taking out existing cable from trenches or fixed to wall/pole or passing through ducts or pipe of any size, any core including taking down unsv cable, complete all as specified and directed.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated , armoured heavy duty electric cable , with aluminium conductor of size 16 Sqmm x 4 core including taking out existing cable from trenches or fixed to wall/pole or passing through ducts or pipe of any size, any core including taking down unsv cable, complete all as specified and directed.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated , armoured heavy duty electric cable , with aluminium conductor of size 35 Sqmm x 3.5 core including taking out existing cable from trenches or fixed to wall/pole or passing through ducts or pipe of any size, any core including taking down unsv cable, complete all as specified and directed.

M&L for scraping of old paint from the steel tubular pole 9 Mtr height with out removing accessories and preparation of surfaces for repainting. Repainting the pole with one coat of alternative yellow and white strips of 30cm each upto 1.5 Mtr height using synthetic enamel paint. Marking the pole number with black enamel paint over yellow circle of dia 100mm. Repainting the remaining pole and iron parts i.e 'U' clamps, channels etc above 1.5 mtr height by applying two coat of alumn paint, incl. writting letters or figures (Block, Roman, Italic or Indian) S/L Pole No and location code n. exc. 30cm high, sto, commas, short lines, dashes, hypens, brackets etc complete all as specified and directed.

M&L in replacement for earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron earth lead wire of 4mm dia as earthing lead by means of nuts, bolts and washers of steel after welding of GI wire to earth electrode to the full lenght of earth plate,20mm dia GI tubing light grade protection pipe upto test point, 15mm dia GI medium grade watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle,angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers in each 15 cm all around the earth plate and filling of vegetable soil to the remaining 10%,removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I and directed by Engr-In-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

M&L in replacement for earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full lenght of earth plate,40mm dia GI tubing light grade protection pipe upto test point, 20mm dia GI watering medium grade pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle,angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers in each 15 cm all around the earth plate and filling of vegetable soil to the remaining 10%,removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I and directed by Engr-In-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

S&F in replacement of bracket for street light fitting made out of 40mm dia GI pipe light grade 1.2 mtr long each bent to required shape & size as directed by EIC & fixed to pole with and including flat iron clamps 02 Nos made out of 32X 6mm flat iron including GI nuts, bolts &washer and painting of clamps and street light fitting bracket with one coat of red oxide primer, one under coat and one finishing coat with aluminium paint including taking out old one complete all as specified and directed.

Supplying, jointing and connecting "as in repairs" cable end termination joint kit, out door, heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 25 sqmm to 50 Sqmm 3.5 core, 1100 volts grade cable including excavation and earth work complete all as specified and directed.

S&F in replacement of U-PVC pipes 50mm bore for passing through cable under the PCC floor, along the wall or along the pole incl two nos of GI clamps 25x4mm size with nuts & bolts laid in trenches on fixed poles complete all as specified and directed.

M&L for galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings including clamp 02 Nos of size 25mm x 4mm, nuts, bolts and washers etec, complete, of size 40mm bore.

M&L in replacement for galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings including clamp 02 Nos of size 25mm x 4mm, nuts, bolts and washers etec, complete, of size 80mm bore.

Supply and erecting "as in replacement" in true vertical position steel tubular swaged poles of 9.00 metres long, type 410 SP-31 complete with cast iron base plate, goose neck bracket, finial taper plug , bolt, nuts & screws as specified and painting internal surface with anti-corrosive paint and external surface painting up to 1.5 m height from base of poles with two coats of synthetic enamel paint Ist quality black & yellow colour alternate strip 30 cm wide over a coat of red oxide primer and remaing portion with two coats of aluminum paint over a coat of red oxide primer, including taking down of unsv steel pole alongwith demolition of PCC, complete all as specified and directed. Note:-Excavation and earth work and concrete in foundation and pedestal shall be measured and paid for separately.

Trimming up of Bushes/ Tree branches upto 3 mtr all around security light poles both side of the road of 6002 (I) workshop, removing cut branches from site as directed, Note :- (i) The overhead lines will be kept clear from all trees by trimming of tree branches with 3 mtr all around the line. Necessary permission will be obtained from department by contractor one day prior to trimming in particular area and shut down of that area will be arranged by department. (ii) only effected Span at site shall be measured where tree branches are touching nearly HT/LT lines complete all as specified and directed.

M&L for Prestressed concrete pole, 9.0 metres long, 102mm x 152mm at top and 102mm x 289mm at bottom, class 10 in true vertical position and external surface painting up to 1.5 m height from base of poles with two coats of synthetic enamel paint Ist quality black & yellow colour alternate strip 30 cm wide over a coat of red oxide primer and remaing portion with two coats of aluminum paint over a coat of red oxide primer, complete all as specified and directed. Note:-Excavation and earth work and concrete in foundation and pedestal shall be measured and paid for separately. complete all as specified and directed.

S&F as in repalcement danger notice plate factory made of 1.6mm thick mild steel sheet, vitreous enamelled white duly writing, 1100 volt electric line with letters/figures of appropriate size and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and directed.

Supply and connecting single core FRLS, PVC sheathed multi stranded cable of size 1.5 sqmm for street light/flood light passing through pole/GI pipe/PVC conduit to junction box in two run and connected electrically complete all as specified and directed.

M&L for supply connecting PVC insulated sheathed FRLS copper multistranded cable of size 1.5 sqmm 3 core for street light/flood light passing through pole/GI pipe/PVC conduit from junction box to street light and connected electrically by thimble of suitable size in junction box busbar incl taking old UNSV wire any type any make, complete all as specified and directed.

KULBHUSHAN AGGARWAL

SATISH AND CO

JAI DURGA CONSTRUCTION CO

M/S SUKHMANI ENGINEERS

Standard engineers

SUBASH MAHAJAN

AGGARWAL ASSOCIATES

Bidder Name

SUBASH MAHAJAN

Standard engineers

KULBHUSHAN AGGARWAL

SATISH AND CO

AGGARWAL ASSOCIATES

JAI DURGA CONSTRUCTION CO

M/S SUKHMANI ENGINEERS

M/S HIMANSHU BUILDERS