CREATION OF 63 KVA SUB-STATION ALONG WITH HT/LT NETWORK FOR PROVIDING OF POWER SUPPLY TO DEGIGNATED COVID CENTRE AT NTPHC WACHI UNDER SDRF ON TURN KEY BASIS

Amount

Supply,Transportation ,Installation,testing & commissioning of 63 KVA Transformer Energy efficient level 2 as per relevent IS

Supply, Errection,testing & commissioning of ST poles 9 mtr long 410-SP-33 with base plate and cap including transportation

Supply,Errection,testing & commissioning of ST poles 8 mtr long 410-SP-15 with base plate and cap includingtransportation

Supply,Laying,stringing,tensioning and binding of ACSR 0.03 including pretenioning for removal kinks,fixing of Hardware fittings and jointing.(Conductor shall be supplied by Deptt.)

Supplying and erection of GI channel/angle cross arms including fixing MS channels ( 100x50x6mm) / (75x40x6 mm) / angles(50x50x6 mm) with 50X8 mm back clamps without drilling/punching holes in the poles.

Supplying and erection of GI Channel “V’ cross-arm (75 x 40x6mm) with MS Angle Pole Top Bracket (50x50x6 mm) including back clamps of 50X8 mm for fixing V-Cross arm and pole top bracket without making holes in the ST pole as per REC standard for single pole structure.

Providing & fixing of 11 KV pin insulator Complete (Polymer )5 KN With Pins

Providing & fixing of 11 KV GO AB Switch 200A alogwith Handle and other accessories

Providing & fixing of 11 KV LA SET 9 KVA ,10 KA,LA WITH ,Polymer Housing Station Type

Providing & fixing of 11KV D.O FUSE SET 3 Phase 400 Ampere ,Polymer

Supply and fixing of LT Distribution Box for 63KVA DTR with TPN MCCBs short ckt rating 16 KA for incomer 100 Amp(63KVA) and suitable MCCBs for outgoing circuits with terminal extensions.

Supply anfd Fixing of Shackle Insulators Porcelein (16 KN) alongwith GI Mukhi Clamps (50* 6 mm) for LT Shackle Insulators with to be fixed withpout drilling/punching of Poles on ST POLES

Providing & fixing of PVC Cable 185 mm sq Single core

Providing & fixing of Alumunium Thimbles of sizes

Providing & fixing of Nut & Bolts GI

Providing & fixing of SL CLAMP (63-100 KVA) HD

Supply and painting 1 coat red oxide paint and 2 coats of al (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint)

Supplying and fixing of pole Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip(25x3) to each HT pole including supply and welding of GI channel 70x40x150 on pole for earth connection

Supplying and fixing of pole Earthing Complete by GI Spiral Earthing, 8 SWG 115 turn coil earthing as per REC J-1 drawing

Supplying and fixing of 3 No. sub station earthing by GI Pipe 40 mm or GI Rod 20mm, 2.5 mtr long through GI Strip of 50X6 mm 1 no for neutral earthing and 25X3 mm 2 nos (for 2 transformer body earth, two no. pole earth, 1 no. LA Earth and 1 no. GO handle earth). Note: For LA Earth 1 pipe shall be kept separate

Pre and post photography of works/spots alongwith geo tagging. (per site 4 photographs)

southern