Construction of 1 No. of Assistant Jailor and 12 Nos. of Jail warder Quarters with development works for Sub Jail at Omalur in Salem District

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering couse

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3 : C.I. Steps ( 5 kg)

61.2 : Stoneware pipe dry condition a. 100mm dia

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

77.3 : S&F of TV/Telephone line Socket

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE 2.1.1 : Supplying and filling with Gravel

2.1.3 : Supplying and Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1: P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

5.1 : R.R. masonry in C.M. 1:5 Foundation and Basment (using crushed stone sand)

6.2.1 : Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

c) In First Floor.

d) In Second Floor.

e. In Third Floor

f. In Fourth Floor

9.2.1 : Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

10.2.1 : Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) (using crushed stone sand) a. In Foundation and basement

b. In Ground Floor/Stilt floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

11.2.1 : Brick Partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second Floor

d. In Third Floor

12.1.1 : Brick partition work in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second Floor

d. In Third Floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second Floor

d. In Third Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

b. In Ground floor

c. In First floor

d. In Second Floor

e. In Third Floor

16.1.1 : Precast Jally Ventilator 50mm thick.Using standardised M20 grade concrete Mix. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using standardised concrete mix M20 grade. ( with out vibrating charges) (using crushed stone sand) a. 900 x 2100mm

22.3.3 : TW frame & TW styles & rails with BWR double leaf shutters for cup board/ wardrobes including one coat primer & two coats enamel paint.

23.1.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws a. 900 x 2100 mm

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

27.2.1 : B.W in CM 1:4 in Superstructure for OHT using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand) (b) In First floor

(e) In Fourth floor

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles without base concrete

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand)

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand)

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand)

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4 :Two coat of cement paint over one coat white cement

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1: Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - other than G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1 : Gully Trap using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug) superior variety

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

80.1 : 450 x 375 x 20mm thick TW plank

98.3.1 : TW panelled single door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf)

105.1 : Run off 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection.

112.1 : S & F of Exhaust Fan 225 mm dia

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

367 : Providing wooden (melamine) polish for new wood

379.4.2.1 : Granite Tiles flooring 10mm thick (Jet black) for Kitchen arrangements. a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

383: S&F of Cuddapah sink 600 x 600 x 200mm

384: S&F of PVC flushing cistern 10 litre Capacity

448.2: Supply and fixing 32mm dia PVC Tee with end cap

799 : Two coat of OBD over one coat white cement for inner walls

ANNEXURE II A1) : Supplying and fixing of 9 Watts LED bulbs

A2) : Supplying and fixing of 18 Watts LED tube light of 4' long

A3) : Supplying and fixing of Bulk head fittings suitable for 12W bulb.

A4) : Supplying and fixing of 25 W LED street light with fittings

A5) : Supplying and fixing of 12 Watts LED bulbs

A6) : Drilling of 150mm dia vertical bores in hard rock

A7) : Drilling of 150mm dia bore wells in all stratum including hard rock areas

A8) : Supply, delivery and fixing of 160mm dia PVC casing pipe of 6kg/cm.Sq

A9) : Supply and delivery of wet type lubricated submersible motor with multistage pumpset. Motor : 3HP, 2.2Kw,2900rpm,, 415Volts, 50HZ, 40Stage

A10) : Supplying and Fixing of three phase MS fabrictaed DOL control panel board. Upto 5 HP

A11) : Supplying and Fixing of single phase MS fabrictaed DOL control panel board

A12) : Supplying of 2.0 HP open well submersible Pump set

A13) : Supplying and fixing of 1 1/4 " Top And Bottom adopter set for connecting submerssible pumpset

A14) : Supplying and delivery of following dia "U" PVC pipes. a) 32mm dia UPVC column pipe

A15) : Supplying and fixing of 3 core 2.50 sq.mm PVC flat cable

A16) : Supplying and laying of 25mm dia GI pipe and specials with ISI mark of best quality ( Below Ground Level)

A17) : Labour charges for the erection of submersible pumpset inside bore well for 3 HP/40 stage

A18) : Supply and fixing of 180mm dia MS Bore well end cap and MS bore well clamp set of size 500x40x10mm

A19) : Supplying and fixing 110mm dia PVC 4 Kg/cm2

A20) : Supplying and fixing of following dia GI/ GM/PVC pipes and specials. a) 40mm dia GI pipe

b) 40mm GI Elbow

c) 40mm GI coupling

d) 40mm GI Hex Nipple

e) 40mm dia GI union

f) 40mm dia non return valve.

g) 40mm dia GI Bend.

A21) : Supplying and fixing of PVC pipes and specials with ISI mark quality (Below Ground level) including earth work excavation and refilling., a)50mm dia PVC pipe 10 kg/Cm2

b) 50mm dia Elbow

c) 50mm Dia Tee

d) 50mm Dia FTA

e) 50mm Dia MTA

A22) : Supplying and fixing of following size of TNPHC Emblem & Aluminium Dye casting letters with MRF Powder Coating a) Aluminium dye cast letters 12" size TNPHC Emblem

b) Aluminium dye cast letters 9" size

c) Aluminium dye cast letters 6" size

d) 18" TNPHC EMBLEM

A23) : Supplying and laying of following GI pipe B class with ISI mark ( Above Ground Level) a) 100mm dia GI pipe.

b) 50mm dia GI pipe.

A24) : Supplying and fixing of following dia GI specials. a.) 100 mm dia GI bend

b.) 50mm dia GI bend

c.) 100 mm dia GI Coupling

d.) 50mm dia GI Coupling

A25) : Supplying of following LTUG Cable from meter board to fornt of the block and EB pole top for EB service connection etc.., a) 3.5 core 70 sqmm LTUG cable

b) 3.5 core 25 sqmm LTUG cable

A26) : Labour charges for laying of 3.5 core 70 sqmm LTUG cable above ground level

A27) : Labour charges for laying of 3.5 core 25 sqmm LTUG cable above ground level

A28) : Supply and fixing of cable gland suitable for PVC armored LTUG cable etc. a) Cable gland suitable for 70 sqmm UG Cable

b) Cable gland suitable for 25 sqmm UG cable

A29) : Supplying and fixing 3 no 100 Amps 500 volts grase/ well porcelin fuse unit on suitable teak wood plank to be fixed on the top of the EB poles.

A30) : Metering panel for 10 Services (8 in 1 PC/HC qtrs + 1 common + 1 spare) Supply & erection of 125 Amps capacity floor mounting metering panel board (cubical type) of size 5.5'x6.5'x1' with bus chamber.

A31) : Metering panel for 6 Services (4 in 1 PC/HC qtrs + 1 common + 1 spare) Supply & erection of 125 Amps capacity floor mounting metering panel board (cubical type) of size 5.5'x6.5'x1' with bus chamber.

A32) : Metering panel for 4 Services (1 Asst Jailor+ Pumproom+ 1 common + 1 spare) Supply & erection of 125 Amps capacity floor mounting metering panel board (cubical type) of size 5.5'x6.5'x1' with bus chamber.

A33) : Supply and fixing of TNEB meter board suitable for 3 phase100A service connection

A34) : Supplying and fixing of 63 AMPS Triple pole main switch.

A35) : Supplying and fixing of MS clamps using mild steel flas of suitable for fixing the GI pipe with EB pole.

A36) : Supplying and fixing of 3 Nos. of 200 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of materials etc.,

A37) : Removing the Panchayat garbage debris away from the site . a). 0 to 2 m depth

b). 2 to 3m depth

GRG Builders