Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance PLOT NO 65 SECTOR 18 OPP HIPA SARHAUL GURUGRAM 122 001 | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹230.5 Cr
EMD Value
₹2.4 Cr
Closing Date
30 Dec 2019, 5:30 pmClosed
Shri Vikas Tyagi
CHIEF CONSTRUCTION ENGINEER (RnD) NORTH, DRDO, MINISTRY OF DEFENCE Development Enclave, Rao Tula Ram Marg, Delhi Cantt
PROVISION OF TECHNICAL FACILITY AT SITE LK
2019_DRDO_509926_1
CCE RnD/N/BM/ENQ-III-R/NOV/2018-19
Limited
Civil Works
1460 days
LEH LADAKH INDIA
Please Refer tender Documents
7 documents required · 7 mandatory
₹3,000
CCE (RnD) NORTH
₹2.4 Cr
24 Jan 2020
25 Oct 2019
1 Jan 2020
26 Oct 2019
30 Dec 2019
2 Nov 2019
Amount
PART A DESIGN & BUILD ( LUMP SUM QUOTE )
Design and Construction of Technical facility complete as per Tender requirements laid down in para 2.3 Section-2 Volume 1 this includes detailed designs, good for construction drawings, supply, execution, installation, Testing and commissioning and handing over the following including supply of all labor materials, equipments, facilities and handing over all assets with SOP for maintenance and standard documentations as per Employers requirement for the following
Complete work for buildings, substations, control/plant rooms, sump & pump houses etc as listed in Table-I & Table- II, Section-11, Volume -III
EOT Cranes, Rails for Traverse trolleys and bin trolley
Fire Path
CCTV, Telephone and LAN Conduits
HVAC System
Power Wiring, LT Panels, LT Cables, Special Earthling, lightning Protection
DG Sets, Electric Supply, external electrification, Area lighting
Signages
Water Supply including treatment and fire fighting
Sewage and waste water disposal system including septic tank and soak pit
One number traverse trolley.
Internal MEP services works – Electrical system, HVAC system, Drainage System, Central monitoring system, plumbing system, sewage system etc.,
. The Tenderer shall review the layout plan for the site within the development controls specified in this NIT
All civil work required for external and internal MEP services such as HVAC ,electrical , plumbing etc in technical & non technical areas
MS ladder to access the terrace of each building.
Area grading of the complete technical and non technical sites upto required formation level as per drawings and as directed by the Engineer-In-Charge
Storm water drainage (approx. 5km for technical area and 1.2km for non technical area) including area grading, construction of R.C.C. drains including providing Hume pipe culverts 4 nos (hume pipe dia between 0.6 mtr to 1.2 mtr and class NP3 conforming to latest BIS) and R.C.C box culverts (8 nos having span 8 mtr to 12 mtr) and connection with the existing nallah .
PART B ITEM RATE
SUB HEAD - I ROAD WORK
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 meters
Supply of good earth i/c loading , unloading and stacking at site by mechanical transport from outside the MOD land .
locally available earth / Moorum / Sand
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge
All kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
Ordinary rock
Carriage of Material upto (1 KM )
Earth
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :
All kinds of soil
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
With material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR Value-25.
Supply of approved Moorum obtained from approved quarry outside MOD land filling in layers not exceeding 200mm in thickness including dressing and leveling, watering, compacting etc., complete as directed and standard specifications and compacting each layer with 8-10 Tonne road roller etc. all complete.
Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in-charge.
Providing and laying design mix cement concrete of M-35 grade, in RCC roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-35 is @ 420 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
Cement concrete prepared with batch mixing machine
Add for using extra cement in the items of design mix over and above the specified cement content therein.
Providing and fixing in position pre-moulded joint filler in expansion Joint
Providing and laying in position polysulphide sealing compound for expansion joints etc.
Providing & placing PVC Pipes (40 mm dia ) on road Expansion joint as Expansion cap around Dowel bars , as per approved drawing as directed by Engineer in charge .
Providing and laying Polythene sheet (125 micron thick) confirming to IS :2508 antifriction layer on the sub base course complete as per specifications.( Overlaps at joints of pvc sheet should be minimum150 mm wide )
Providing and laying at or near ground level factory made kerb stone of M-35 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as perdirection of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Providing & laying 60mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per direction of Engineer-in-charge.
Manufacturing supplying & fixing retro reflective sign boards made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM - D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols & borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat & pressure conforming to class - 2 of ASTM-D-4956-01and fixing the same with suitable size aluminium alloy rivets @20cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.
Cautionary / Warning sign boards of equilateral triangular shape having each side 900mm with support length of 3650 mm.
Providing & applying 2.5mm thick road marking strips (retro-reflective) of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour , T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge. and accordance with applicable specifications.
Providing & fixing post delineators made of ABS round body fitted with 2nos. 100mm dia high reflective reflectors and are mounted on MS pipe of 65mm dia duly powder coated anti rust and anti theft steel to be installed as per direction of Engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level
1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns etc. for mass concrete.
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access platform.
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .
Thermo-Mechanically Treated bars Fe-500 D
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
All works upto plinth level.
All works above plinth level upto floor V level
Extra for providing richer mixes at all floor levels.
Note:- Excess/less cement over the specified cement content used is payable /recoverable separately.
Providing M-35 grade concrete instead of M-25 grade BMC / RMC. (Note : Cement content considered in M-35 is @ 350 kg/ cum)
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in:
Cement mortar 1:6 (1 cement : 6 coarse sand)
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
12 mm cement plaster
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with tiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
450 mm dia RCC pipes.
600 mm dia RCC pipes.
1000 mm dia RCC pipes.
SUB HEAD - II FURNITURE
Supplying and placing in position, Executive table (Model - NUMERO UNO of 'GODREJ' or approved equivalent) with main desk of size 2200 (L) x 1190(W) x 750 (H) whose work top surface having 2 layers of 18 mm thick MFC with 3 mm PVC edging. Side panels MFC covered with 45 mm MDF profile at vertical. Side panel legs are MFC covered with 45 mm MDF profile at vertical edges. Connected to the top panel by minifix & wooden dowels. Adjustable stud. Also 2 nos. of 75 mm Diameter epoxy black painted metal leg to enable ERU top panel to slot in to it. Modesty made up of 18 mm thick MFC with curved shape. Connected to Top & Side panels with minifix fitting & Wooden dowels. Pedestal having 2 Drawers (1 personal drawer and 1 filing drawer with center lock).
Top drawer is pencil tray 280 x 280 mm. Carcass 18mm thick MFC and 25 mm thick top panel with 2mm PVC edging. Black Metallic handles 128mm distance. 450mm L runner. Castor of 50mm diameter x4 Nos.
ERU: Extended return unit of size 1380(L) x 480(W) x 700(H) having work surface 18 mm thick MFC with 3 mm PVC edging. Edging of 2 color tone. Pedestal having 4 Drawers with central lock. Top drawer is pencil tray 280 x 280 mm. Carcass 18 mm thick MFC and 25 mm thick top panel. Black Metallic handles 128 mm distance. 450 mm L runner. 55 diameter x 25 mm H Plastic adjustable glide. Connected to Top with metallic support tube of size 60 mm H x 75 diameter. Cabinet of size 2410 (W) x 425(D) x 1215(H) whose top panel has been made up of 25 mm thick MFC with 2mm PVC edging. Body or medium cabinet: Carcass 18 mm thick MFC with PVC edging & back panel 8 m thick. 55 mm diameter x 25 mm H adjustable glide. Door with locks. Black metallic handles 96 mm distance. 1 fixed shelf connected to side panels with minifix fittings & 1 adjustable shelf.
Entire carcass connected with minifix fittings & wooden dowels. Fixing of top panels with side panels is with screws. Back panel is placed in a groove provided on top, bottom & side panels. Doors : Glass doors made up of 5 mm thick polished edges glass. Fixing using overlay glass hinges & a black metallic Knob. Wooden doors are made of 18 mm thick MFC with 2 mm PVC edging. Black metallic handles 128 mm. Square lock provided. Fixing using overlay hinges.
Supplying and placing in position, Officer Table (Model - Finnesse 5026 of 'GODREJ' or approved equivalent) of size 1500(L) x 750(W) x 750(H), ERU (Side Table)-1050(L) x 450(W0 x 705H, Officer Table Top and Side Panel :- 25mm thick Plain Particle board grade I clad with 0.6 mm thick post formed laminate and 1mm thick backing laminate (BDL). Flat edge duly sealed with 2 mm thick PVC beading. Modesty :- 18 mm thick plain particle board clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge sealed with 2 mm thick PVC beading. ERU Top:- 25 mm thick plain particle board clad with 0.6mm thick post formed laminated and 1 mm thick backing laminate (BDL) Flat edge duly sealed with 2 mm thick PVC beading. Modesty:- 18 mm thick plain particle board clad with 1 mm thick decorating laminate (DL) on both side.
Edge sealed with 2mm Thick PVC beading. Hinge door unit with Top & side panel of 25 mm thick plain particle board clad with 0.6mm thick post formed laminated and 1 mm thick backing laminate (BDL) Flat edge duly sealed with 2 mm thick PVC beading. Door, partition & shelves:18 mm thick plain particle board clad with 1 mm thick decorating laminate (DL) on both side. Edge sealed with 2mm Thick PVC beading. Pedestal size will be 646 H X 390W X 440D. KBPT and CPU trolley is also included with table.
Supplying and placing in position, Working table (Model -Enterprise of 'GODREJ' or approved equivalent) of size 1500W x 750 D x 750H, whose work surface is made of 18mm thick. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edge banding. The modesty panel is made of 18mm thick. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edge banding. The rectangular frame is fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coated (Epoxy polyester). The leg is Fabricated component in 38mm x25mm x1.2mm thick MS ERW Tube (IS:7138),
Finish: Powder coat (Epoxy polyester).The leveler glide for leg is Nylon 6 & MS Bolt. The shell and drawer tray are made of 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).The drawer front is 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester) and frame assembly is 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). KBPT and CPU trolley is also included with table.
Supplying and placing in position, Vertical sliding Door Unit (Model -VSDU2 of 'GODREJ' or approved equivalent) with metal door model having dimensions 735 mm H X 900 mm (W) x 450 mm (D). It has rigid knock down construction and material is prime quality back, side and door made of CRCA steel-0.7 mm thick and rest is 0.8 m thick .Sliding Door with top hanging arrangement to prevent derailment. Each door provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise. The Locking & handle is Snap on type aesthetically appealing die cast 5 Lever Cam lock for safe locking. Plastic flush & recessed handle.
The shelving is Height wise Adjustable Shelf Mounting. It has Uniformly Distributed Load Capacity of shelf is 40Kg maximum. It has 1 Nos. of Adjustable Full Shelves. It is available in metal top. The leveler is Screw type leveler with hex plastic base (add in unit height min.8mm & additional 5 mm max for adjustment) and finish is Epoxy Polyester Powder coated to the thickness of 50 microns.
Supplying and placing in position, 8 seater Boat convex Conference table (Model -Talk 8 seater of 'GODREJ' or approved equivalent) of size 2400(W) X1200(D) X750(H )in laminate finish. Work surface made up of 32mm thick (±1mm), Base Material 18+12mm MDF board, Post laminated work surface with 0.6mm laminate on top and 0.6mm laminate on bottom, 2mm thick PVC edge banding on straight top side edge and Specially designed chamfered It consist of Tbeading fixed at bottom side edge for sleek look. Veil and cross member made up of 18mm thick (±1mm), --- contd...
Base material 16mm Plain particle board, Post laminated with 0.6mm Top laminate on either side, 2mm thick and 0.8mm thick PVC edge banding of matching colour on outer edges of Veil, 0.8mm thick PVC edge banding of matching colour on outer edges of cross member. Legs are Made from 1.6mm Matt silver Anodized Aluminium extrusion. Legs assembled together with a plastic glide holder at bottom and 5mm thick MS powder coated sheet at top.
The Plastic glide holder is having provision for wire entry and glide fixing. The wire carrying is facilited through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusion in the leg. Access flap Made from Matt silver Anodized Aluminium extrusion and plastic moulded components to facilitate access of Electrical/Data/Voice sockets access from Top Switch Mounting Tray Powder coated switch mounting tray made from 0.8mm and 1.2mm MS sheet. Switches to be mounted on tray as per requirement. Provision for mounting 8Module Anchor Roma switch plate on switch mounting tray.
Supplying and placing in position, Center table (Model -Crystalline center table of 'GODREJ' or approved equivalent) of size 1000 W X 600D X 450 H in mm made up of 8mm tempered glass top, MDF understructure with PVC covering. PU paint strip on glass top with silver powder, Glass top attached to the understructure via UV disc and Load bearing capacity of 30 kg.
Supplying and placing in position, Corner table (Model -Crystalline corner table of 'GODREJ' or approved equivalent) of size 600 W X 600D X 450 H in mm made up of 8mm tempered glass top, MDF understructure with PVC covering. PU paint strip on glass top with silver powder, Glass top attached to the understructure via UV disc and Load bearing capacity of 20 kg.
Supplying and placing in position, Sofa Set having seat height 860 mm and Seat depth 600mm, Base Frame made up of Dymetrol stretchable fabric (100 S), M.S. pipe Legs made from Rubber wood, PU Foam (Hardness 20, Density 45 kg/ cubic m), 18 mm thick particle board. armrest made up of Lining cloth cover placed on moulded PU Foam. (Hardness 20, Density 45 kg/cubic m) M.S. pipe, Recron fiber ( 200 grade-chemical bonded). Backrest made up of Lining cloth cover placed on moulded PU Foam. (Hardness 14, Density 45 kg/cubic m) M.S. pipe - Recron fiber ( 200 grade-chemical bonded) Contd...
Seat made up of cloth cover placed on moulded PU Foam. (Hardness 20, Density 45 kg/cubic m) Recron fiber (200 grade-chemical bonded). (Make 'GODREJ' or approved equivalent)
One Seater having seat width 920mm (Model -Urban 1 seater)
Two Seater having seat width 1480mm (Model -Urban 2 seater)
Three Seater having seat width 2040mm (Model -Urban 3 seater)
Supplying and placing in position, High back chair (Model -Kareena High Back of 'GODREJ' or approved equivalent) of seat size 510mm (W) x480mm (H) and back size 480mm(W) x760mm(H). The seat and back made of 12mm thick hot pressed plywood, the seat and back upholstered with fabric and moulded polyurethane foam of density not less than 45 kg/cum & hardness load 16 kgf. The ply and foam provided in back should designed with contoured lumber support for comfortable seating posture.
The armrest top made of injection moulded from polyurethane (PU) and mounted on drop lift adjustable MS tubular armrest support with five step mechanism of height adjustable 65mm in 5 steps and swivel adjustment of 22 degree on both sides. The backrest should consist up down sliding mechanism, which should adjust within the range of 75mm and locked in 4 positions for correct position of lumber support. The chair should have pneumatic height adjustment feature with adjustment stroke 90mm.
The Chair should have 360 degree revolving and single point control mechanism, the seat should tilt upto 12 degree, seat-back tilt ratio should be 1:2, the front pivot for tilt with feet resting on ground ensuring more comfort. The tilting tension adjustment should be 4-position locking with anti-shock mechanism. Seat depth adjustment of 60 mm and can be locked in 6 position. The pedestal made of chromium plated CR steel, and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal should have 660mm pitch center dia (760 mm with castors) etc.
Supplying and placing in position, Medium back chair (Model -Kareena Mid Back of 'GODREJ' or approved equivalent) of seat size 510mm(W) X 480mm(H) and back size 480mm(W) X 645mm(H). The seat and back made of 12mm thick hot pressed plywood, the seat and Back upholstered with fabric and moulded polyurethane foam of density not less than 45 kg/cum & hardness load 16 kgf. The ply and foam provided in back should designed with contoured lumber support for comfortable seating posture. The armrest top made of injection moulded from polyurethane (PU) and mounted on drop lift adjustable MS tubular armrest support with five step mechanism of height adjustable 65mm in five steps and swivel adjustment of 22 degree on both sides. The backrest should consist up down sliding mechanism, which should adjust within the range of 75mm and locked in 4 positions for correct position of lumber support.
The chair should have pneumatic height adjustment feature with adjustment stroke 90mm.
The Chair should have 360 degree revolving and single point control mechanism, the seat should tilt upto 12 degree, seat-back tilt ratio should be 1:2, the front pivot for tilt with feet resting on ground ensuring more comfort. The tilting tension adjustment should be 4-position locking with anti-shock mechanism. Seat depth adjustment of 60mm and can be locked in 6 position. The pedestal made of chromium plated CR steel, and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors . The pedestal should have 660 mm pitch-center dia. (760 mm with castors) etc.
Supplying and placing in position, High back chair (Model -Bravo High Back of 'GODREJ' or approved equivalent). The seat & back are made up of 12mm thick hot pressed plywood, upholstered with fabric & moulded with Polyurethane foam together with moulded ABS seat and back covers. The back foam should designed with contoured lumbar support for extra comfort. High back size 475 mm Width x 695 mm Height mm. And seat size 470 mm Width x 480 mm The polyurethane foam should be moulded with density 45 kg/m3 and hardness 16 +/2 kgf on hampdem machine at 25% compression. Armrest are injection moulded from black copolymer polypropylene. The mechanism should be fixed 360 degree revolving type, Upright position locking, tilt tension adjustment, seat back tilting ratio 1:3. The pneumatic height adjustment has an adjustment stroke of 12 cm.
The pedestal should be injection moulded in black 33% glass filled in nylon 66 with 5 nos twin wheel castors. The pedestal should be 660mm pitch-center dia.
Supplying and placing in position, Medium back chair (Model -Bravo Mid Back of 'GODREJ' or approved equivalent). The seat & back are made up of 12mm thick hot pressed plywood, upholstered with fabric & moulded with Polyurethane foam together with moulded ABS seat and back covers. The back foam should designed with contoured lumbar support for extra comfort. Mid back size 475 mm Width x 580 mm Height mm. And seat size 470 mm Width x 480 mm The polyurethane foam should be moulded with density 45 kg/m3 and hardness 16 +/2 kg on hampdem machine at 25% compression. Armrest are injection moulded from black copolymer polypropylene. The mechanism should be fixed 360 degree revolving type, Upright position locking, tilt tension adjustment, seat back tilting ratio 1:3. The pneumatic height adjustment has an adjustment stroke of 12 cm.
The pedestal should be injection moulded in black 33% glass filled in nylon 66 with 5 nos twin wheel castors. The pedestal should be 66.3 cm pitch-center dia.
Supplying and placing in position, Weatherproof monoblock plastic chair with arm of approved colour and sample made from the100% virgin Polymers. (Make 'Supreme', 'Neelkamal' or approved equivalent.
Supplying and placing in position, Full height Storage (Model -Storewel plain of 'GODREJ' or approved equivalent) of size 916mm (W) x 486mm (D) x 1980mm (H). The construction shall be welded construction with 0.7mm thick CRCA for shelf and 0.8mm thick for back. The door shall be made of 0.8mm thick CRCA and all other metal component shall be made of 0.9mm thick CRCA. The locking and handle of the storage shall be mazak handle with three way locking mechanism. The shelving shall be height adjustable and shall have a load capacity of 40kg. The product shall be epoxy powder coated to the thickness of 50 microns.
Supplying and placing in position, Low height Storage (Model -Minor Plain of 'GODREJ' or approved equivalent) of size 765mm (W) x 440mm (D) x 1270mm (H). The construction shall be welded construction with 0.6mm thick CRCA for shelf and 0.8mm thick for back. The door shall be made of 0.8mm thick CRCA and all other metal component shall be made of 0.9mm thick CRCA. The locking is three way locking mechanism. The shelving shall be height adjustable and shall have a load capacity of 40kg. The product shall be epoxy powder coated to the thickness of 50 microns.
Supplying and placing in position, hard top Cot of size 1950(L) x950(W) x400mm (H), made out with GI pipe frame along with provision of fixing mosquito net and 19mm thick commercial ply top including painting with synthetic enamel paint over a coat of wood primer etc. all complete as directed by Engineer -in-charge.
Supplying and placing in position, Low height bed locker of size 765mm (W) x 440mm (D) x 1270mm (H). The construction shall be welded construction with 0.6mm thick CRCA for shelf and 0.8mm thick for back. The door shall be made of 0.8mm thick CRCA and all other metal component shall be made of 0.9mm thick CRCA. The locking is three way locking mechanism. The shelving shall be height adjustable and shall have a load capacity of 20kg. The product shall be epoxy powder coated to the thickness of 50 microns.
Supplying and placing in position, Hat Stand cum mirror of size 750x600mm made out of teak board having mirror of size 300x450mm on R.H.S. side of board and 4 Nos. brass hooks for hanging cap, all exposed edges to have teak wood beading including spirit polish etc. all complete as directed by Engineer -in-charge.
Supplying and placing in position, Slotted angle racks for storage made from Mild steel (IS – 1079), of size 900mm (W) x 300mm (D) x 2000mm (H). The construction shall be using MS angle 60 mm x 40 mm x 2 mm and the shelving shall be three teir using 1.25mm thick CRCA fixed with bolts & nuts and height adjustable. The product shall be epoxy powder coated to the thickness of 50 microns.
Supplying and placing in position, Work Station 1000(L) x 600(W) x 750 (H), with one key board tray, one 100mm deep, 400mm wide drawer on sliding channel and cabinet underneath. Top and sides made out of 19mm thick teak / commercial board. 4mm thick teak wood lipping on exposed surface of board, top with 1mm thick lamination, all side polished with melamine polish including Brass / stainless steel hardwares, locks, latch etc. as directed by Engineer -in-charge.
Supplying and placing in position, Table of size 2200mm (L) x900mm (W) x750mm (H) with 19mm thick raised partition for fixing CCTV monitors, 2 nos. drawer, kew board tray, 450mm wide storage cabinets underneath at both end of table, made out with 19mm thick commercial board with 4mm thick teak veneer/1mm thick lamination on all exposed surfaces, teak wood moulding of size 40x30mm and 6mm thick lipping on exposed edges, wooden legs, adhesives, polishing with melamine finish etc. all complete as directed by Engineer-in-charge.
Supplying and fixing in position, overhead cabinatory / cupboard. The box and shelves shall be madeout of 19mm thick commercial board and 6mm thick ply wood on back side, 19mm thick commercial board shutter fixed to box with piano SS hinges. The shutter and exposed edges of box shall have 4mm thick teak wood lipping, 1mm thick lamination on exposed surfaces, melamine polish on lipping and synthetic enamel paint in white colour inside the box all complete including Brass / stainless steel hardwares, locks, latch etc. as directed by Engineer -in-charge.
300 mm deep
Supplying and fixing in position, under counter cabinets made out of 19mm thick commercial board box, shelves, shutters and 6mm thick plywood on back side, 19mm thick commercial board shutter fixed to box with piano SS hinges. The shutter and exposed edges of box shall have 4mm thick teak wood lipping, 1mm thick lamination on exposed surfaces, melamine polish on lipping and synthetic enamel paint in white colour inside the box all complete including Brass / stainless steel hardwares, locks, latch etc. as directed by Engineer -in-charge.
600mm deep
Whirlpool or equivalent Professional Deluxe Double Door-310 Ltrs Capacity: 308 Litres Defrosting Type: Frost Free Material Used for Shelves: Toughened Glass Deodourising
Supply and placing of 40 / 80 ( 80 ltr capacity ) water cooler with SS body tank and water storage tank with Aquagard
Providing & Fixing of Vertical blinds 100mm series, of Dust Repellant range of coated fabric in Silky , Echo ,Serene ,Gallery, Sabine, Rhythm,Symphony series of 100% polyester ( Poly-viscose) fabric range, with fabric min. thickness of 0.50mm & Weight: minimum -270 GSM of approved make Vista /Aerolux/ Marvel décor Blinds.
SUB HEAD - III : ARBORICULTURE
GRASS
Supplying and stacking of locally available earth / Sand at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :
Screened through sieve of I.S. designation 20 mm
Screened through sieve of I.S. designation 16 mm
Screened through sieve of I.S. designation 4.75 mm
Rough dressing the trenched ground including breaking clods.
Fine dressing of the ground.
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
With grass Turf
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
TREE PLANTATION
Digging holes in ordinary soil and refilling the same with the excavatedearth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts ofstacked volume of earth after reduction by 20% : 1 part of stacked volumeof manure after reduction by 8%) flooding with water, dressing includingremoval of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
Holes 1.2 m dia and 1.2 m deep
Holes 0.90 m dia and 0.90m deep
Supply and stacking of the following well developed,healthy,true to variety/type plants/Trees having minimum height as below mentioned at site work.
Supply and stacking of Malchang Willow (Wonder Plant) plant in big poly bags of size 25 cm as per direction of the officer-in-charge.
Supply and stacking of Poplar (genus Populus) plant and grows to a height of 35 metres (115 feet). in big poly bags of size 25 cm as per direction of the officer-in-charge.
Supply and stacking of Apricot (Prunus Armeniaca) plant ,stone fruit of the family Rosaceae (order Rosales) having ht. upto 8.0 m to 12.0 m.in big poly bags of size 25 cm as per direction of the officer-in-charge.
Supply and stacking of Apple (Malus pumila) plant having ht. upto 3.0 m to 12.0 m in big poly bags of size 25 cm as per direction of the officer-in-charge.
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water).
Trees Plant
Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.
Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
Trees for 250 no/(up to 4 & up to 3 year Slow & Fast growing Per tree group)
SUB HEAD - IV : ELECTRICAL EARTH STATION
Supply, installation, testing and commissioning of Maintenance Free Earthing system comprising of 65 mm dia, standard length (as per equipment supplier) Copper electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs . Bentonite compound upto a depth of 2.4meters around the electrode capsule with 300x300x300 Brick chamber & CI Cover complete.
Supply, installation, testing and commissioning of Maintenance Free Earthing system comprising of 40 mm dia, standard length (as per equipment supplier) Copper electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs . Bentonite compound upto a depth of 2.4meters around the electrode capsule with 300x300x300 Brick chamber & CI Cover complete.
Supply and laying of following size earth strips including excavation and refilling of earth below 600 mm when laid in ground and with all fixing accessories when laid on the wall with necessary interconnections with earth station and equipments.
25 X 3 mm Copper strip in Trench
25 X 3 mm Copper Strip laid in Ground
50 X 5mm Copper strip in Trench
50 X 5 mm Copper Strip laid in Ground
SUB HEAD - V POWER FENCING
Supply ,erection , testing and commissioning of 24 Hr operational High security power fence at upto 4 mtrs height of existing boundary wall with required materials fixtures and fasteners including transportation to site and all taxes etc complete with following Specification including all civil work required for fixing the post.
TECHNICAL DATA
Length of the fence in meters - 3200
Number of strands - 13
Height of the fence on Wall in meters - 1.2
Gap between strands in MM approximately - 91
Number of zones - 15
Zone length in mtrs (Average)- 220
Distance between posts in meters - 3
Safety standards - IEC 60335-2-76
Material
IP Energizer with inbuilt Alarm unit, Onboard LCD with Keypad, 100 dB Siren and Inbuilt Network controller
Live Light and Strobe light
12V Charger with12V / 42 AH SMF Battery for more than 8 hour backup
Lightning Diverter Kit
Outdoor console rack IP 56 rating
End / Corner post: 50 NB Class B pipe duly galvanized to more than 60 microns of 1.5 meter length with 1.2 meter 2 mm thick KIWITAH and 32 NB Class B Support pipe(s)
Intermediate KIWITAH post of 2 mm thick duly glavanized to more than 60 microns of 1.5 meter height
Intermediate post Breakaway insulators
End strain Hooks
End strain insulators
Joint Clamps
Wire tightness
HT wire 2.59mm
9mm double insulated cable with 20mm HDPE conduit
Warning sign board
Gate top electrification, 4 feet with 13 strands on existing gate
Fence Secure Software with PC & 21" monitor and UPS with 30 min backup
Earthing kit
Digital Voltmeter and tool set
500 VA UPS with 30 min backup
6 core armored single mode fiber optic cable with HDPE conduit
3 core 6 Sq. mm armored Copper conductor XLPE cable
Managed switches including accessories like LIU, Patch chords, Splicing etc.
Underground Cable laying upto a depth of 500 mm charges including excavation, backfilling etc .
Varindera Constructions Limited
Inderjit Mehta Constructions Private Limited
JMC Projects India Limited
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid