Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAdmitted-Finance S P MUKHERJEE ROAD MURGASOL ASANSOL 3 CORPORATION PASCHIM BARDHAMAN PASCHIM WEST BURDWAN BARDHAMAN 713303 WEST BENGAL INDIA | ASANSOL | PASCHIM BARDHAMAN | WEST BENGAL | 713303 | ₹5.5 L | L1 | Admitted-Finance |
| 2 | Rejected-Technical JANAI KASARIPARA PO JANAI HOOGHLY WB 712304 | HOOGHLY | WEST BENGAL | 712304 | - | - | Rejected-Technical Rejected |
| 3 | Rejected-Technical PURANA HAT P O BURNPUR ASANSOL BARDHAMAN 713325 WEST BENGAL INDIA | ASANSOL | BARDHAMAN | WEST BENGAL | 713325 | - | - | Rejected-Technical Rejected |
| Sl No | Description | Qty | Unit | M K ENGINEERINGS WORKS L1 |
|---|---|---|---|---|
| 1.00Part A: PCC - 101&102 | ||||
| 1.01 | Making of new Shell: Cost of raw material of 20 mm thick M.S. plate Rough weight: dia 500 mm x 1600 mm long | 2 | WORK | 35,550 ₹71,100 |
| 1.02 | Cost of M.S. Plate Bending | 2 | WORK | 5,200 ₹10,400 |
| 1.03 | Cost of welding rod of ESAB make Duroid 250(4 mm) 5 packets | 2 | WORK | 8,500 ₹17,000 |
| 1.04 | Cost of DA & oxygen | 2 | WORK | 4,600 ₹9,200 |
| 1.05 | Cost of welding of above mentioned M.S. Plate | 2 | WORK | 3,700 ₹7,400 |
| 1.06 | Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size | 2 | WORK | 4,700 ₹9,400 |
| 1.07 | Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 500 mm dia X 18 mm thick plate | 2 | WORK | 5,040 ₹10,080 |
| 1.08 | Cost of plate welding (flange both side) by groove cutting | 2 | WORK | 5,500 ₹11,000 |
| 1.09 | Cost of machining and rectification of 02 nos. boss after removing old side plates | 2 | WORK | 3,200 ₹6,400 |
Updated dates
Tender Value
₹6.5 L
EMD Value
₹8,200
Closing Date
30 Dec 2025, 11:00 amClosed
Area Engineer EnM
Office of The General Manager, Jhanjra Area, ECL
Repairing of two no. pressure Drum PCC No.-101 n 102(shell dia 500 mm X 1600 mm long, shaft dia. 160 mm) of 1400 mm Belt Conveyor no.1 and one no. bend Drum PCC No. - 103(shell dia 800 mm X 1400 mm long, shaft dia. 160 mm) of Steel cord Belt Conveyor
2025_ECL_349398_1
ECL/GM/JNR/EnM/A2/25-26/105 dated 12.12.2025
Open Tender
Miscellaneous Works
21 days
Jhanjra UG
Please refer Tender documents.
4 documents required · 4 mandatory
₹8,200
19 Jan 2026
15 Dec 2025
31 Dec 2025
15 Dec 2025
30 Dec 2025
16 Dec 2025
15 Dec 2025 - 22 Dec 2025
Amount
Part A: PCC - 101&102
Making of new Shell: Cost of raw material of 20 mm thick M.S. plate Rough weight: dia 500 mm x 1600 mm long
Cost of M.S. Plate Bending
Cost of welding rod of ESAB make Duroid 250(4 mm) 5 packets
Cost of DA & oxygen
Cost of welding of above mentioned M.S. Plate
Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size
Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 500 mm dia X 18 mm thick plate
Cost of plate welding (flange both side) by groove cutting
Cost of machining and rectification of 02 nos. boss after removing old side plates
Making of new Stiffeners: Cost of making 08 nos. new stiffeners of size 160mm X 120mm X 16mm by raw material M.S. Plates including 10 % as cutting and maching allowances
Cost of fitting of complete drum set including side plates, boss along with 08 nos. stiffeners
Cost of checking Static Balancing of the drum and making it proper after necessary fabrication
Cost of painting of complete drum by oil paint for making of rust proof
Part B: PCC-103
Making of new Shell: Cost of raw material of 20 mm thick M.S. plate Rough weight: dia 800 mm x 1400 mm long
Cost of M.S. Plate Bending
Cost of welding rod of ESAB make Duroid 250(4 mm) 5 packets
CoSt of DA & oxygen
Cost of welding of above mentioned M.S. Plate
Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size
Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 800 mm dia X 18 mm thick plate including 10% as machining allowance
Cost of plate welding (flange both side) by groove cutting
Cost of machining and rectification of 02 nos. boss after removing old side plates
Labour cost for dismantling, welding, gas cutting, preheating, grinding machininng 02 nos new keyway making through slot cutting in both side boss and again assembling complete drum
Cost of checking Static Balancing of the drum and making it proper after necessary fabrication
Cost of painting of complete drum by oil paint for making of rust proof
Part C: PCC-104
Making of new Shell: Cost of raw material of 12 mm thick M.S. plate Rough weight: 215 mm x 1600 mm long including 10 % as cutting and maching allowances
Cost of M.S. Plate Bending
Cost of welding of above mentioned M.S. Plate
Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size
Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 215 mm dia X 16 mm thick plate including 10 % as cutting and maching allowances
Cost of plate welding (flange both side) with the new shell
Cost of machining and rectification of 02 nos. boss after removing old side plates
Making of new Stiffeners: Cost of making 08 nos. new stiffeners of size 160mm X 120mm X 16mm by raw material M.S. Plates including 10 % as cutting and maching allowances
Cost of fitting of complete drum set including side plates, boss along with 08 nos. stiffeners
Cost of checking Static Balancing of the drum and making it proper after necessary fabrication
Cost of painting of complete drum by oil paint
Part D: PCC-105
Cost of DA & oxygen for preheating
Cost of Dismantling Charges
Making of new Shell: Cost of raw material of 12 mm thick M.S. plate Rough weight: dia 215 mm x 1600 mm long
Cost of M.S. Plate Bending
Cost of welding of above mentioned M.S. Plate
Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size
Cost of fitting of complete drum set including side plates, boss
Cost of checking Static Balancing of the drum and making it proper after necessary fabrication
Cost of painting of complete drum by oil paint for making of rust proof
Part E: PCC -106 & 107
Making of new Shell: Cost of raw material of 20 mm thick M.S. plate Rough weight: dia 400 mm x 1600 mm long
Cost of M.S. Plate Bending
Cost of welding rod of ESAB make Duroid 250(4 mm) 5 packets
Coat of DA & oxygen
Cost of welding of above mentioned M.S. Plate
Cost of machining of above mentioned M.S. plate for making new shell as in desired shape and size
Making of new flanges: Cost of Raw material (Mild Steel) for making both side new Flanges. Rough weight: size 400 mm dia X 18 mm thick plate including 10% as machining allowance
Cost of plate welding (flange both side) by groove cutting
Cost of machining and rectification of 02 nos. boss after removing old side plates
Making of new Stiffeners: Cost of making 08 nos. new stiffeners of size 180mm X 140mm X 16mm by raw material M.S. Plates including 10 % as cutting and maching allowances
Labour cost for dismantling, welding, gas cutting, preheating, grinding machininng 02 nos new keyway making through slot cutting in both side boss and again assembling complete drum
Cost of checking Static Balancing of the drum and making it proper after necessary fabrication
Cost of painting of complete drum by oil paint for making of rust proof
Total impact of GST for the purpose of CTC
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Tendernotice_2.pdf
PDF • 1.20 MB
BOQ_362138.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid