Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC PLOT NO 14 SHIV COLONY KATI GHATI RAJGARH ROAD ALWER RAJ | ALWAR | ALWAR | RAJASTHAN | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.9 L+₹2.8 L (7.09%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹46.9 L+₹6.9 L (17.1%)Rejected-Finance 580 INDRA COLONY JAISALMER RAJASTHAN 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹69.5 L+₹29.4 L (73.3%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹71.6 L+₹31.5 L (78.7%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
| Sl No | Description | Qty | Unit | Vinay Traders L4 | HIMANSHI ENTERPRISES L2 | M/s Yash Electrical and Maintenance L1 | Manisha Enterprises L5 | HINGLAZ ENTERPRISES L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main point and carryout in MES store yard for repairing of capacity 25/50 ltrs of any type and make complete all as specified & directed by Engineer-in-charge. | 410 | Each Job | 150 ₹61,500 | 80 ₹32,800 | 50 ₹20,500 Lowest | 160 ₹65,600 | 60 ₹24,600 |
| 2.00 | Refixing storage type water heater storage type capacity 25/50 ltrs of any type, any make and the serviceablity of all parts of such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly complete (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge.
(Note :- Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below) | 410 | Each Job | 350 ₹1,43,500 | 110 ₹45,100 | 100 ₹41,000 Lowest | 380 ₹1,55,800 | 200 ₹82,000 |
| 3.00 | Supply & Fix for heating elements, 1.5 KW ISI marked 230 volts and including taking out existing heating elements complete all as specified and directed by Engineer-in-charge. | 70 | Each | 650 ₹45,500 | 620 ₹43,400 | 500 ₹35,000 | 620 ₹43,400 | 350 ₹24,500 Lowest |
| 4.00 | Supply & Fix for heating elements, 2 KW ISI marked 230 volts and including taking out existing heating elements complete all as specified and directed by Engineer-in-charge. | 650 | Each | 700 ₹4,55,000 | 746 ₹4,84,900 | 600 ₹3,90,000 | 685 ₹4,45,250 | 500 ₹3,25,000 Lowest |
| 5.00 | Supply & Fix for thermostat immersion point, Length 175 mm to 250 mm, Temperature 0 to 75 degree C, 230 volts/AC and including taking down existing thermostat immersion point complete all as specified and directed by Engineer-in-charge. | 420 | Each | 225 ₹94,500 | 100 ₹42,000 Lowest | 100 ₹42,000 Lowest | 250 ₹1,05,000 | 110 ₹46,200 |
| 6.00 | Supply & Fix of safety valve for 25/50 ltr geyser and including taking down existing safety valve complete all as specified and directed by Engineer-in-charge. | 25 | Each | 250 ₹6,250 | 369 ₹9,225 | 50 ₹1,250 Lowest | 275 ₹6,875 | 200 ₹5,000 |
| 7.00 | Supply & Fix of pressure releasing valve for 25/50 ltr geyser and including taking down existing pressure release valve complete all as specified and directed by Engineer-in-charge. | 30 | Each | 350 ₹10,500 | 493 ₹14,790 | 35 ₹1,050 Lowest | 390 ₹11,700 | 220 ₹6,600 |
| 8.00 | S & F sheet metal enclosure with two pin and earth metal clad plug and socket complete with one double pole MCB 20 Amp 240 V and including taking down existing metal clad plug complete all as specified and directed by Engineer-in-charge. | 80 | Each | 1,600 ₹1,28,000 | 1,981 ₹1,58,480 | 650 ₹52,000 Lowest | 1,650 ₹1,32,000 | 750 ₹60,000 |
| 9.00 | Supply & Fix for Three pin plug top, 16 amp capacity, 240 VAC, heavy duty and including taking down existing plug complete all as specified and directed by Engineer-in-charge. | 90 | Each | 90 ₹8,100 | 57 ₹5,130 Lowest | 90 ₹8,100 | 135 ₹12,150 | 110 ₹9,900 |
| 10.00 | Supply & Fix for MCB SP 16 Amps single pole, 'B' curve, 230 volt, 50 Hz and including taking down existing MCB complete all as specified and directed by Engineer-in-charge. | 120 | Each | 220 ₹26,400 | 184 ₹22,080 | 80 ₹9,600 Lowest | 250 ₹30,000 | 120 ₹14,400 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 Jul 2025, 6:00 pmClosed
GE Army Jaisalmer
GE Army Jaisalmer- 345001
REPAIR AND MAINT OF HEATING APPLIANCES AND SOLAR WATER HEATING SYSTEMS UNDER GE (A) JAISALMER
2025_MES_714164_1
8478/25-26/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹90,000
Yes
8 Sept 2025
13 Jun 2025
14 Jul 2025
13 Jun 2025
11 Jul 2025
27 Jun 2025
Amount
Taking down storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main point and carryout in MES store yard for repairing of capacity 25/50 ltrs of any type and make complete all as specified & directed by Engineer-in-charge.
Refixing storage type water heater storage type capacity 25/50 ltrs of any type, any make and the serviceablity of all parts of such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly complete (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge. (Note :- Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below)
Supply & Fix for heating elements, 1.5 KW ISI marked 230 volts and including taking out existing heating elements complete all as specified and directed by Engineer-in-charge.
Supply & Fix for heating elements, 2 KW ISI marked 230 volts and including taking out existing heating elements complete all as specified and directed by Engineer-in-charge.
Supply & Fix for thermostat immersion point, Length 175 mm to 250 mm, Temperature 0 to 75 degree C, 230 volts/AC and including taking down existing thermostat immersion point complete all as specified and directed by Engineer-in-charge.
Supply & Fix of safety valve for 25/50 ltr geyser and including taking down existing safety valve complete all as specified and directed by Engineer-in-charge.
Supply & Fix of pressure releasing valve for 25/50 ltr geyser and including taking down existing pressure release valve complete all as specified and directed by Engineer-in-charge.
S & F sheet metal enclosure with two pin and earth metal clad plug and socket complete with one double pole MCB 20 Amp 240 V and including taking down existing metal clad plug complete all as specified and directed by Engineer-in-charge.
Supply & Fix for Three pin plug top, 16 amp capacity, 240 VAC, heavy duty and including taking down existing plug complete all as specified and directed by Engineer-in-charge.
Supply & Fix for MCB SP 16 Amps single pole, 'B' curve, 230 volt, 50 Hz and including taking down existing MCB complete all as specified and directed by Engineer-in-charge.
Supply & Fix for Fastners screw for fixing Geyser storage capacity 25/50 ltrs of any type and make and including taking down existing fastners screw complete all as specified and directed by Engineer-in-charge.
Supply & Fix of PVC connection pipe duly chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete, length of pipe is not less than 450 mm suitable for Hot/ cold water system and including taking down existing PVC connection complete all as specified and directed by Engineer-in-charge.
Supply & Fix of PVC connection pipe duly chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete, length of pipe is not less than 600 mm suitable for Hot/ cold water system and including taking down existing PVC connection complete all as specified and directed by Engineer-in-charge.
Supply & Fix of indicator lamp assembly for geyser and including taking down existing indicator lamp assembly complete all as specified and directed by Engineer-in-charge.
Supply & Fix of 3 core PVC insulated and sheathed cable with copper conductor of size 40/0.076 and including taking down existing cable complete all as specified and directed by Engineer-in-charge.
Supply & Fix of inlet & outlet assembly plate suitable for 25 ltrs capacity geyser as per existing pattern and including taking down assembly plate complete all as specified and directed by Engineer-in-charge.
Supply & Fix of inlet & outlet assembly plate suitable for 50 ltrs capacity geyser as per existing pattern and including taking down assembly plate complete all as specified and directed by Engineer-in-charge.
Supply & Fix for Inner tank of geyser of 25 Ltr capacity of made out of steel tank in replecement of leakage tank of geyser and including taking down existing inner tank complete all as specified and directed by Engineer-in-charge.
Supply & Fix for Inner tank of geyser of 50 Ltr capacity of made out of steel tank in replecement of leakage tank of geyser and including taking down existing inner tank complete all as specified and directed by Engineer-in-charge.
S&F, in repair, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed by Engineer-in-charge.
S&F in repair, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
M&L for servicing of ETC/FPC type solar water heater of any capacity including taking down, cleaning and descaling of tubes, refixing of tubes, checking and prevention of any leakages, functioning of NRV & gate valves, cleaning of stainless steel hot water tank,checking and repair the heating coil connections, functioning of thermost etc complete all as specified & directed by Engineer-in-charge. Note :- Defective items replaced will be measured under respective items.
Dismantling old defective FPC solar water heater collector of any type any make complete all as specified & directed by Engineer-in-charge.
Taking down of Old U/S hot water tank of any capacity any make complete all as specified & directed by Engineer-in-charge.
S & F MNRE registered/approved 500 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.
S & F MNRE registered/approved 300 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.
S & F MNRE registered/approved 200 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.
S & F MNRE registered/approved 150 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.
S & F MNRE registered/approved 100 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with thermostat and heater coil 2/3 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.
S & F MNRE registered/approved 200 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with 20 tube holes of 58mm diameter and outer PPGI with 20 Nos of 58x1800 mm tubes , thermostat and heater coil 2 KW and suitable size of MS powder coated stand 25x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.
S & F MNRE registered/approved 150 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with 15 tube holes of 58mm diameter and outer PPGI PUF insulation with 15 Nos of 58x1800 mm tubes with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.
S & F MNRE registered/approved 100 LPD non pressurised ETC stainless steel hot water tank with inner tank material SS 304 with outer cladding of painted & oven baked pre coated galvanised sheet, insulated with 40mm thick high density PUF insulation with 10 tube holes of 58mm diameter and outer PPGI with 10 Nos of 58x1800 mm tubes with thermostat and heater coil 2 KW and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing all as specified and directed by Engr-In-Charge.
S&F tubes of Evacuated tube collector (ETC) type 1800mm long tubes with inner dia 47mm and outer dia 58mm with frame and frame angle 30 degree complete all as specified and directed by Engr-in-Charge.
S&F tubes of Evacuated tube collector (ETC) type 2100mm long tubes with inner dia 47mm and outer dia 58mm with frame and frame angle 30 degree complete all as specified and directed by Engr-in-Charge.
Taking down old U/S , broken pipe of any type any size complete all as specified and directed by Engr-in-Charge.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete of size 20mm including union, bends and tees complete all as specified and directed by Engineer-in-charge.
S&F for heating element for solar water heating system of capacity 2/3 KW and including taking down existing heating element complete all as specified & directed by Engineer-in-charge.
S&F for thermostat 3 KW suitable for 100 to 500 litres capacity of solar water heater and including taking down existing thermostat complete all as specified & directed by Engineer-in-charge.
Dismantling & taking out the unserviceable Gun-metal, globe or gate valves of any size from geyser/solar connection pipe complete all as specified & directed by Engineer-in-charge.
S&F for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends from iron pipe and fixed size 15 mm complete all as specified & directed by Engineer-in-charge.
S&F for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends from iron pipe and fixed size 20 mm complete all as specified & directed by Engineer-in-charge.
S&F for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends from iron pipe and fixed size 25 mm complete all as specified & directed by Engineer-in-charge.
S&F Ball brass valves, high pressure,with polythene float valve 20mm and flynut complete,screwed for iron pipe and including taking out existing valves complete all as specified & directed by Engineer-in-charge.
S&F 20/25 mm dia bore cast iron non return (reflux) valve both flanged ends in swing type design as per IS 5312 Part-1, PN-1.0, including taking out existing valves complete all as specified & directed by Engineer-in-charge.
Supply & Fix for rotational moulded synthetic (HDPE) water storage tank of capacity of 1000 litre capacity triple layered, cylindrical vertical with closed top hoisted and fixed in position and including taking down existing tank all as specified in SSR Part-I complete all as specified & directed by Engineer-in-charge.
Supply & Fix for rotational moulded synthetic (HDPE) water storage tank of capacity of 500 litre capacity triple layered, cylindrical vertical with closed top hoisted and fixed in position and including taking down existing tank all as specified in SSR Part-I complete all as specified & directed by Engineer-in-charge.
S&F for GI tubing 20 mm dia medium grade galvanised with necessary fittings such as tees, elbows, bends, reducers, union etc laid in wall ceiling & Floor including all fittings and including taking out existing tubing complete all as specified & directed by Engineer-in-charge.
S&F for GI tubing 15 mm dia medium grade galvanised with necessary fittings such as tees, elbows, bends, reducers, union etc laid in wall ceiling & Floor including all fittings and including taking out existing tubing complete all as specified & directed by Engineer-in-charge.
S & F sheet metal single pole and neutral enclosure with a two pin and eath plug and socket complete with one single pole MCB 20 Amp 240 V and including taking down existing plug complete all as specified & directed by Engineer-in-charge.
M&L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 4.00 Sqmm (FRLS) in PVC conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 4.00 Sqmm (FRLS) of continous earth wire green in colour and including taking down existing submain wiring complete all as specified & directed by Engineer-in-charge. (Note :- Two runs of 4.00 Sqmm cable & one run of 4.00 Sqmm cable shall be paid as one unit length)
M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC casing caping including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour and including taking down existing submain wiring complete all as specified & directed by Engineer-in-charge. (Note :- Two runs of 6.00 Sqmm cable & one run of 6.00 Sqmm cable shall be paid as one unit length)
S&F in repair sheet metal enclosure MCB SPN DB 8 way IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified & directed by Engineer-in-charge. Make : Legrand Cat pot No 507611 or equivalent in Appx 'B'list of makes.
S&F in repair sheet metal enclosure MCB SPN DB 4 way IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified & directed by Engineer-in-charge. Make :- Legrand Cat pot No 507610 or equivalent in Appx 'B'list of makes.
S&F in repair sheet metal enclosure MCB SPN DB 2 way 240 volts sngle door with magnitic locking system complete all as specified & directed by Engineer-in-charge.
S&F in repair MCB's single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified & directed by Engineer-in-charge.
Taking down of old U/S rusted MS structure of solar water tank any type any shape complete all as specified & directed by Engineer-in-charge.
Taking down of old U/S rusted MS structure of cold water tank any type any shape complete all as specified & directed by Engineer-in-charge.
S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like includind caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates grade Fe-290 (Gde E-165), including all lattice bars, stiffeners, gusset plates etc welded together, anchor duly painted with two coats of synthetic enamel paint over and coat of red oxide primer and and forming PCC work and 12mm thick etc complete to avoid any deformation complete all as specified and directed by Engr-In-Charge.
HIMANSHI ENTERPRISES (BID ID -3346663)
HINGLAZ ENTERPRISES (BID ID -3347194)
Vinay Traders (BID ID -3344868)
Manisha Enterprises (BID ID -3346960)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .