Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹23.0 L+₹3.9 L (20.4%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
1 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison EngineerWest Jalandhar Cantt
Kabir Road Jalandhar Cantt.
PERIODICAL SERVICES TO OTM AND MD ACCN IN AREA A-3 OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT
2022_MES_549937_1
GE/JAL(W)-49/2022-23
Open Tender
Civil Works
Item Rate
270 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer West Jalandhar Cantt
₹50,000
Yes
12 Oct 2022
5 Sept 2022
3 Oct 2022
5 Sept 2022
1 Oct 2022
19 Sept 2022
Amount
M&L preparation of old decorated surface of cieling applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old decorated surface of wall applying one coat of colour wash complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old decorated surface of wall applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-Charge.
Material and labour for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surface and applying two coats of cement base paint complete all as specified and directed.
Material and labour for preparation of old decorated surface of walls including scrapping down smook soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of exterior emulsion paint as per manufacturer's instructions complete all as specified and as directed.
M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: Welded Mesh to paid separately) (The rate quoted by the contractor shall be included for scaffolding etc) (EIC shall ensure to get the complete work executed against this term before submission of completion)
M & L for Preparation of old steel surface of any description over 10 CM width or girth and applying one coats of synthetic enamel paint complete all as specified
M & L for Preparation of old wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Taking down cement plaster on brick wall upto any height(max of triple storey) including raking out joints hacking for key srcubbing down with water complete all as specified and as directed
M&L 15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed
M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed
M&L 5 mm thick cement plaster in cement mortar 1:3 on celling surfaces finished even and smooth without using extra cement complete all as specified and directed.
Grubbing up bushes or tree trunk of grith n exc 10cm including taking/digging out roots and making good disturbed portion of wall with PCC 1:3:6 type C-1 and removing of unserviceable material to a distance n exc 50 m and clearing site complete all as specified and directed.
M & L for Preparation of old stone/concrete surface of any description over 10 CM width or girth and applying one coats of synthetic enamel paint (in alternate colours if required as per site) complete all as specified
M&L for Preparation new surface of wall and applying two coat of oil bound distemper over a coat of wall putty complete all as specified and directed.
M&L for three coats of white wash on newly plastered surfaces of celling including prepration of surfaces complete all as specified and directed.
M&L for three coats of white wash on newly plastered surfaces of celling including prepration of surfaces complete all as specified and directed.
M&L for writing letters and figures (Block romon italic or indian) n exc 30 cm high complete one set at one place with synthetic enamel paint complete all as specified and directed.
Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 60/80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed by Engineer-in-Charge.
Providing and applying white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or its equivalent over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute) or equivalent Step 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar having maximum tip size 0.039" Step 3: Allow 6-8 hrs time to dry the putty surface. Step 4: Apply second coat of the prepared mixer manually to make to smooth to make the finish even. Step 5: Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge.
Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM between 600-1500, sannding paper of 180 Grit having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.
Providing and applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.
Providing and applying two coats of cement based paint @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.
ROHIT CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .