Works contract for Maravaneri Sub Division in East Division

Amount

Excavation of Pole/Stay Pit

Excavation of pole pit upto 27' (8.0 m) Pole by using JCB or manual

Stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit above 8.0 Mtr pole PSC/RCC/RSJ pole by using JCB or manual

Hard rock without blasting (where houses are located)

Erection of poles.

PSC/ RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

PSC/ RCC poles/Metal poles above 8.00m by using JCB or manual

Erection of stay set complete

Fixing of Cross Arms

HT "V" cross arms (all types) / Channel cross arms/ Guarding Cross arms

LT 3 phase cross arms

LT Single phase cross arms

HT/LT TI Fittings

Fixing of HT pin Insulators 22 KV

Fixing of HT 11 KV strain disc.

Fixing of HT 22 KV strain disc

Fixing of LT pin Insulator

Fixing of LT shackle

Fixing of Aluminium Knob

Earthing of pole with coil earthing including burying looping and binding

Paving of Conductor, stringing etc., complete with ACSR/ AAAC for both HT/LT lines.

ACSR 7/4.09 mm Raccoon conductor

ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

ACSR 7/2.59 mm / AAAC 2.50 mm weasel and ACSR 7/2.11 mm Conductor

DT/ DP erection

Erection of Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structure poles, fixing of top channel, seating channel, belting angle including concreting (Except erection of Transformer)

Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer)

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)

Below 8 Kms (Plains)

Above 8 Kms. For additional Km (Irrespective of weight in tonnage)

Transport of Poles road side to pole pit including loading and unloading

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100m

Loading and unloading of poles:

Loading of poles upto 8.0 M/ 27

Loading of poles above 8.0 M

Loading of metal poles (All sizes)

Unloading of poles upto 8.0 M/27

Unloading of Poles above 8.0 M

Unloading of metal poles (All sizes)

Loading of materials

Unloading of materials

Leading and stacking of materials

Guarding arrangements:

Flat guarding including fixing of 2 Nos. cross arms

HT Guarding

Service Erected:

Releasing of single phase service and re-fixing.

Releasing of 3 phase service and (upto 50 HP) re-fixing.

Erection of street light including fixure fitting

Concreting of poles:

Mass concreting including materials (Cement + River sand/ M sand and Blue metals and watering)

Sleeve concreting including materials (Cement + River Sand/ M sand and Blue metals and watering)

Dismantling of Line Materials

Dismantling of Transformer structure Complete

Dismantling of Single pole Transformer Structure complete

Dismantling of pole (9.0m and above)

Dismantling of pole (7.5mtr & 8mtr)

Dismantling of pole from pole pit (9.0m and above)

Dismantling of pole from pole pit (7.5mtr & 8mtr)

Dismantling of HT 22 KV Pin Insulator

Dismantling of HT TI Fitting

Dismantling of11 KV disc

Dismantling of 3 PH X arm

Dismantling of Tapping X arm, V X arm & Guarding X arm

Dismantling of 1 PH X arm

Dismantling of Alu Knob

Dismantling of LT pin Insulator

Dismantling of LT Shackle Insulator

Stay set complete Dismantling

Dismantling of 7/4.09 mm ACSR conductor

Dismantling of 7/3.35 mm ACSR conductor

Dismantling of 7/2.59 & 7/2.11 mmACSR conductor

Dismantling of St light fitting

Erection of Transformer

Loading or unloading of Transformer upto 100 KVA

Loading of Transformer above 100 upto 200 KVA

Unloading of Transformer above 100 upto 200 KVA

Loading/ unloading of HT Metering set

Erection of New Transformer all capacities (with jumpering)

Erection of HT Metrering Set

Replacement of failed Transformers all capacities (with jumpering)

Miscellaneous works

Fencing of Distribution Transformer structure at Road side- Fabrication and Erection

Erection of new earth pipe by replacing the corroded earth pipe

Releasing of grills from RCC Poles

Re-sagging of HT/LT lines

Re-sagging ACSR 7/4.09 mm Raccoon conductor

Re-sagging ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

Re-sagging ACSR 7/2.59 mm / AAAC 2.50 mm Weasel and ACSR 7/2.11 mm conductor

GENERAL

Engaging of JCB/ Crane

for first 2 Hrs

For every additional Hrs

Tree cutting works

Cutting of coconut leaves (per tree)

Clearing of branches of trees

Lathe Works

Drilling of hole in channel only 3/4" & 1"

Cutting of channel

T.I.Fitting welding with clamps

Labour charges for alteration of Back Clamps/ Stay Clamps to suit for the works

G.S.T. @18% should be Entered by the Bidder