Shifting of 750KVA DG Set at Chamshen Nubra under District Capex 2025 26

Amount

Earth work in exeavation by manual means in foundation trendches or drains (not exeeding 1.5m in widh or 10sqm on plan) including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the exeavated soil and disposal of surplus exeavated soil and disposal of surplus exeavated soil as directed wth in a lead of 50m All kinds of soil

Genset Foundation Length ( 7.31) Breadth (2.13) Hight (0.23)

Transformer Foundation Length ( 1.83) Breadth (1.83) Hight (0.23)

Column Footing Length ( 12.00) Breadth (0.61) Hight (0.99)

Cable Trench ( 20.00) Breadth (0.76) Hight (0.91)

Stone soling dumping of stone including cost of stone (In horizontal on level

Genset Shed Length ( 6.10) Breadth (9.75) Hight (0.10)

Column Footing Length ( 12.00) Breadth (0.61) Hight (0.10)

Transformer Foundation Length ( 1.83) Breadth (1.83) Hight (0.23)

Cable Trench ( 20.00) Breadth (0.76) Hight (0.91)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutting All work up to plinth level :(1:4:8 1cement : 4Coarse send (Zone -III ) deriver from natural source s :8 graded stone aggregate 40mm nominal size derived from natural sources)

Genset Shed Length ( 6.10) Breadth (9.75) Hight (0.08)

Column Footing Length ( 0.61) Breadth (0.61) Hight (0.08)

Transformer Foundation Length ( 1.83) Breadth (1.83) Hight (0.08)

Cable Trench ( 20.00) Breadth (0.76) Hight (0.08)

Providing and laying in position specified grade of reinforeed cement concrete, excluding the cost of centering and shutting finshing and reinforeeement -All work up to plinth level :1:1:5: 3 (1 cement : 1.5Coarse send (Zone -III deriver from natural source s :3 graded stone aggregate 20mm nominal size derived from natural sources)

Genset Shed Length ( 7.31) Breadth (2.13) Hight (0.46)

Column Footing Length ( 0.61) Breadth (0.61) Hight (0.20)

Column Pedestal Length ( 0.38) Breadth (0.38) Hight (0.91)

Transformer Foundation Length ( 1.83) Breadth (1.83) Hight (0..46)

Cable Trench Bed ( 20.00) Breadth (0.76) Hight (0.10)

Cable Trench Sides ( 20.00) Breadth (0.10) Hight (0.76)

Centering and shuttering including strutting propping etc and removal of form for foundations footing bases of columns etc for mass concrete.

Genset Shed Length ( 9.45) Breadth (0) Hight (0.46)

Column Pedestal Length ( 1.52) Breadth (0) Hight (0.91)

Transformer Foundation Length ( 1.83) Breadth (1.83) Hight (0..46)

Cable Trench Sides ( 20.00) Breadth (0) Hight (0.76)

Steel work in built up tubular (Round square or reciangular hollow tubes etc) trussues etc, including Hot finished scamiess type tubes

Truss Frame SHS 50*50*[email protected]/m Length(23.16) Breath(0) Height(0)

Purlin SHS 50*50*[email protected]/m Length(10.36) Breath(0) Height(0)

Column SHS 150*150*[email protected]/m Length(3.96) Breath(0) Height(0)

Base Plate/ Wall Plate 12mm Thick 300*300mm Length(0.30) Breath(0.30) Height(0.01)

Providing and fixing bolts including nuts and washers complete Length(0) Breath(0) Height(0)

Anchor Bolt 16mm dia and 450mm long @0.80Kg/No. approx Length(0) Breath(0) Height(0)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation asapproved by Engineer-in-charge ) 0.50mm(-0.05%) total coated thickness with zinc coating 120grams per sqm as per IS 277, in 240mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet andpolyester top coat 15-18 microns. Sheet should have protective gurad film of 25microns minimum to avoid scratches during transportation ans should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/Self tapping screws of size (505x55mm) with EPDM seal, complete upto any pitch in horizonal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required Length(0) Breath(0) Height(0)

Roofing Length(10.36) Breath(3.35) Height(0)

Side Length(15.85) Breath(4.27) Height(0)

Providing and fixing precoated galvanised steel roofing accessories 0.50mm (+0.05%) total coated thickness, Zinc coating 120grams per sqm as per IS 277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns using using self drilling self tapping screws complete Ridges plan (500-600mm) Length(10.36) Breath(0) Height(0)

12mm cement plaster of mix: 1:4(1 cement : 4 fine sand) Length(0) Breath(0) Height(0)

Genset Foundation Top Length(7.31) Breath(2.13) Height(0)

Sides Length(9.45) Breath(0) Height(0.46)

Transformer Foundation Top Length(1.83) Breath(1.83) Height(0)

Sides Length(3.66) Breath(0) Height(0.46)

Column Pedestal Length(1.52) Breath(0) Height(0.30)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in posistion and binding all complete upto plinth level. Thermo-Mechanically treated bars of grade fee-500D or more Length(0) Breath(0) Height(0)

Qty vide item No. 04 @70Kg/Cum Length(0) Breath(0) Height(0)

Structural steel work in single section, fixed with or without connecting plate, including cutting , hoisting Length(0) Breath(0) Height(0)

ISA 30*30*4mm forGates @1.80kg/m Length(21.33) Breath(0) Height(0)

ISA 30*30*4mm for Cable Trench Cover @1.80kg/m Length(4.57) Breath(0) Height(0)

Flats 40*3mm for cable trench cover @0.942kg/m Length(16.76) Breath(0) Height(0)

ISA 30*30*4mm for Shed Sides @1.80kg/m Length(31.70) Breath(0) Height(0)

ISMC 100for Equipments @9.56Kg/m Length(3.05) Breath(0) Height(0)

Carriage of materials by Mechanical Transport including londing, unloading and stacking Length(0) Breath(0) Height(0)

Cement Average 190km Length(0) Breath(0) Height(0)

Steel Average 190km Length(0) Breath(0) Height(0)

Sand Average 20km Length(0) Breath(0) Height(0)

Aggregates Average 20km Length(0) Breath(0) Height(0)

Soling Average 20km Length(0) Breath(0) Height(0)

Shifting of Machinery

Dismentling of 750KVA DG (complete Set) lying at 4MW P/H Choglamsar, loading & Carriage of the DG Set to Chamshen , Unloading, installing & Comissioning the same at the newly constructed concrete foundation bed at Chamshen Power house alongwith providing of Chemical earthing of the DG Station (earthing material to be provided by the department)

Taking delivery of 1.0 MVA Step up Transformer from Choglamsar PH , loading in truck and its carriage to Chamshen P/H , unloading at Chamshen and erection on concrete base at the specified location identified by the department and its testing and commissioning alongwith providing of Chemical earthing of Sub-Station (earthing material to be provided by the department)

Dismantling & Testing of LT Panel alongwith LT cable 3½ Core, 400sqmm, 50 meters length & control cables at 4MW P/H Choglamsar & then taking delivery of the same thereby loading in the truck and its carriage from Choglamsar to Chamshen, unloading at Chamshen and laying in cable trench, erection, testing and commissioning onload.

Supply and installation of 48V Battery and its Charger

Supply and installation of 48V Battery and suitable Charger of lastest IS standard for the 750KVA DG set

SS ELECTRICAL SERVICES (BID ID -165632)

M/S STANZIN NURBOO (BID ID -165629)