Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC | L1 | Accepted-AOC being l1 | |
| 2 | L2₹7.8 L+₹1.3 L (20.7%)Rejected-AOC | L2 | Rejected-AOC not being L1 | |
| 3 | Rejected-Technical | - | Rejected-Technical Not as per requisite category |
Tender Value
₹6.5 L
EMD Value
₹13,000
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (AF) THOISE
GARRISON ENGINEER (AF) THOISE 19 FBSU, c/o 56 APO, PIN 937219
PROVN OF FLAME PROOF LIGHT WITH CONNECTED WORKS IN BLDG NO. T- 44 AND ADDN/ALTN OF BILLIARD ROOM AT AF STN THOISE UNDER GE (AF) THOISE
2023_MES_619612_1
GEAF/T-41/2023-24
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER (AF) THOISE
AS per tender document
7 documents required · 7 mandatory
₹500
GE AF THOISE
₹13,000
Yes
5 Dec 2023
19 Sept 2023
13 Oct 2023
19 Sept 2023
11 Oct 2023
27 Sept 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premis, complete all as specified and directed by Engr in Charge.
M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set over rendering 10 mm thick in cm 1:4 and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr in Charge.
M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including15 mm thick screed bed in cm 1:4, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge.
M&L for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and directed by Engr in Charge.
M&L for 150 mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base, finished the surface even and rough to receive top layer complete all as specified and directed by Engr in Charge.
M&L for 100 mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement complete all as specified and directed by Engr in Charge.
M&L for precast cement concrete block masonry with solid block, Type C1 1:3:6 (using 20mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:6 extracomplete all as specified and directed by Engr in Charge.
M/L for External rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed by Engr in Charge.
M/L for Internal rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed by Engr in Charge.
M&L preparing newly plastered or unplastered surface of walls and applying two coats of cement base paint over one coat of primer etc,complete all as specified and directed by Engr in Charge specified and directed.
M&L for preparation of newly plastered surface of wall including Chalk whiting, on plastered surfaces etc and applying two coat of white wash on walls, complete all as specified and directed by Engr in Charge specified and directed.
Demolition PCC block or stone/ boulder masonary built in cement mortar complete all as specified and directed by Engr in Charge specified and directed.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes, foundation etc and getting out in any type of soil complete all as specified and directed by Engr in Charge specified and directed.
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed by Engr in Charge specified and directed.
M & L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded stone aggregate, exc. 10 cm in width and setting in cement mortar 1 : 4 complete all as specified and directed by Engr in Charge specified and directed.
Returning filling in and including spreading levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed by Engr in charge.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr in charge.
Material and labour for flame proof point wiring for one light point or one socket point controlled by one switch with using 2.5 Sqmm (nominal area) stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade in and including stove enameled black, rigid steel conduits of size not less than 15 mm dia (Medium grade) fixed on surface of walls/ceilings as directed with all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core FRLS, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly / fittings etc. complete all as specified and directed by Engr-in-Charge. NOTE : (i) Old junction boxes retrieved in serviceable conditions shall be re-used in the work. However, additional junction boxes, if any required, for making new point wiring other than the quantity of junction boxes retrieved from taking down of point wiring, shall be measured and paid for separately as ‘’supply only’’ under appropriate item of Schedule `A' but fixing element of any type of junction boxes new or old is deemed to be included in the rates quoted by the contractor for the above item. (ii) Wiring shall be terminated and connected to the relevant switch / controlling switch gear and relevant fittings / sockets all as directed and controlling switch / fittings shall be measured and paid for separately under appropriate item of Schedule `A'. Copper Cable - Polycab/Havells/Finolex/L&T Steel Conduit- NIC/TATA/Jindal/Kalinga/AKG
All as per Srl item No18.00 above but point wiring with using 2.5 Sqmm (nominal area) stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable for 16 Amps Flame proof Switch and socket complete all as specified and directed by Engr-in-Charge.
Supply and Fixing flame proof 16A Single pole ON-OFF /rotary type switch of any description any capacity or make complete all as specified & directed by Engr-in-charge. Make: Cat Part No RI/OA/1010-2A of Sudhir Switchgears Ltd or equivalent in Crompton Greaves/ Shyam Switchgears/ Flexpro Electricals/ Bajaj/Philips
Supplying & fixing flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 2 pole + earth suitable for 250 volts supply and current rating of 16 Amps complete all as specified & directed by Engineer-in-Charge. Make – Cat part No. SS/OA/1010 -1 of Sudhir Switchgears Ltd or equivalent in Crompton Greaves/ Shyam Switchgears/ Flexpro Electricals/ Bajaj/Philips
S&F in repair flame proof point weather proof LED tube light fitting box type with 1x16 W led tube fitting including connecting electrically to ceiling using flexible 3 core PVC insulated over all sheated with flexible copper conductor of size .75 Sqmm all as required complete all as specified & directed by Engr-in-charge. Make : Havells/Bajaj/Crompton Greaves/Sudhir Switchgears/Syska/Bajaj/Philips
S&F Flame proof exhaust fan 305mm sweep operating on 230 volt AC supply complete including making hole in wall , fixing the exhaust fan inclu louves of suitable size , connecting the exhaust fan with copper wire upto ceiling rose complete all as specified and directed by Engr in Charge. Note job includes the cost of making hole and necessary civil works and the cost of louvers.
M/S MOHD KARIM
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .