REPAIR/REPLACEMENT TO ROOFING FLOORING AND CEILING, BOUNDARY WALL, FENCING, DRAIN, CULVERT AND PATH AND OTHER BR NATURE WORK IN NOWGONG MIL STN (BKD) UNDER AGE B/R-I AT GE JHANSI

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L 25 mm PCC 1:2:4 type B0 12.50 mm Stone Agg for leveling course complete all as specified and directed.

M&L for semi skid ceramic color tiles of size exc 0.18 sqm not exc 0.38 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and directed.

M&L for semi skid ceramic color tiles of size exc 0.11 sqm not exc 0.18 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and directed.

M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and directed.

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed.

M&L 4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equalflanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, duly fixed in ceiling frame work, complete all as specified and directed.

Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.

Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.

M&L for 6mm thick asbestos cement, one piece plain angular ridge or two piece adjustable plain wing ridge orrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.

M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.

S&F of 40x 5 mm thick mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed.

Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime cova etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) mixed with water proofing compound @ 0.20 Ltr/bags on roof surface when concrete is green, complete all as specified and directed. (Note:- WPC shall be measured and paid separately)

Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as specified and directed.

M&L water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100 microne HMHDPE outer flim 20 micron each having thickness 3 mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions complete all as specified and directed with following course of description below:- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated. (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm. (c) 3rd course of laying of APP Based modifiedpolymeric membrane with 100mm overlap in longitudinal direction and 150mm in transverse direction and edges to be taken up to vertical wall of 20cm height inserted into the vertical wall concealed the joints with bitumen sealed. All joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (d) 4th course of apply a coat of bituminous aluminium paint @0.20 kg/sqm over APP membrane.

M&L for cutting grooves in brick wall, 75mm wide and 65 mm deep and shapping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc 6m mean radius built in cm (1:6), complete all as specified and directed.

M&L for half brick thick wall with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of ceiling, complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coat of cement based paint , complete all as specified and directed.

M&L for preparation of old plastered surface and applying one coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of painted surfaces of walls and applying one coat of white wash (lime) on walls surface, complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of white wash (lime) on walls surface, complete all as specified and directed.

Dismantling existing water tanks, (or lowering if required) of exc. 250 litres & not exc. 500 litres capacity of tanks, complete all as specified and directed.

Dismantling existing water tanks, (or lowering if required) of exc. 500 litres & not exc. 1000 litres capacity of tanks, complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed.

S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as specified and directed.

S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as specified and directed.

S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.

M&L for factory made PU coated, chequered cement concrete tiles of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment, made of PVC moulded (or rubber mould) with vibrating system laid over 50 mm thick sand cushion, with and incl CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate.

M & L for cement concrete type C2, 1:3:6 (40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type BO using 12.50 mm graded stone aggregate as in Benching, Coping cills, steps; plinth courses, string courses, etc complete all as specified and directed.

Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stoppedends etc., complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of walls, complete all as specified and as directed.

M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of ceiling, complete all as specified and as directed.

M&L Mild steel TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT 6 to 8mm mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil, complete all as specified and directed.

Removing of excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

Demolition and breaking up drain pipes of 150 mm internal dia size (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar including concrete bed, complete all as specified and directed.

M&L Reinforced concrete pipes 200mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L Reinforced concrete pipes 300mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L Reinforced concrete pipes 450mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.

Cutting in to existing Man hole for conecting new drains , making good to pipe and renderig , cutting out exsiting benching for and forming branch chanel internal dia of pipe 150mm all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for drain pipes of 150 mm internal dia size, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel and drain etc complete all as specified and directed.

Supply only Glass dividing strips 3mm thick and 38mm wide fixed in floor complete all as specified and directed.

Dismantling posts or struts (wood,or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Excavation in post hole (similar hole) each not exceeding 0.5 Cum getting out, returning filling and ramming, complete all as specifide and directed.

M&L for mild steel angle and flat Iron for gate, posts and struts and straining bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specifide and directed.

Dismantling fencing wire any type complete all as specified and directed.

M&L for chain link fencing, of size 50 x 50mm and (overall dia of wire 4mm), fixed to any type of standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for galvanised iron, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75.0 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for precast cement concrete (1: 2: 4) type B-1 using 20 mm graded stone aggregate as in drain/manhole covers, with plain fair faces including chamfers, weathering throttling etc and set in cement mortar (1:4) complete with joint to match including necessary form works complete all as specified and directed.

M&L for Providing precast cement concrete louvres and jallies, type B0, 1:2:4 (using 12.5 mm graded agg) 45mm thick (measured solid), including all mouldings but excluding frame and set in cm 1:4 complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC Nominal mix type B1 1:2:4 20mm gradded agg as in coloum incl neccesory form work complete all as specified and directed.

M/sDaljeet singh keer

Total Construction & Management Services

M/s JS Constructions

Shri Tirupati Associates