REPAIR/ REPLACEMENT TO EARTHING, CEILING FAN, EXHAUST FAN, PADESTAL FAN, AIR CIRCULATING FANS, WALL MOUNTING FANS, DISTRIBUTION BOARDS AND MISC ELECT WORKS INCL LEDISATION

Amount

Taking down carefully ceiling fan of any sweep, any size/make having any winding from existing position of any height by disconnecting elect connections and transporting/ shifting to GE(E) JRC Elect for inspection in presence of JE incharge in workshop and transporting/ shifting back to qtr/ building/ accn after repair from where dismantled etc complete all as specified and as directed. Note: The parts replaced under repair shall be measured under relevant item of schedule

Hanging only/ fixing only ceiling fan 1200mm/1400mm sweep after repair & maintenance upto any height upto 5 Mtr complete incl making electric connections, testing for full speed complete all as specified and as directed

M&L for complete Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep (any type copper/ aluminium winding) at work shop, incl dismantling complete the ceiling fan parts i.e. blades, fan rod, canopy, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, blade and greasing/oiling etc assembling, cleaning and testing of ceiling fan as directed. Note:- (i) Unserviceable parts as Sr No 6 to 15 and Sr No 17 to 19 shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Writing of MES Nos and painting of ceiling fan shall be measured and paid separately under relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge and contractor. (v) Cost of minor part i.e. lock pin, PVC connector, screws shall be deemed to included in the cost of quoted rate. (vi) The contractor shall return back fans after repair within 15 days of receipt. In case of delay, a recovery of Rs 20 per fan per day shall be levied.

Removing of old burnt winding any type (copper/ aluminium), cleaning stator complete for burnt wiring, carbon residue and rewinding of stator by winding of any type/any make fan/ any stator design ceiling fan of 1200mm sweep with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning in presence of JE incharge complete all as directed by Engr-in-Charge

Ditto, All as per Srl Item No. 4.00 above but 1400 mm sweep

Supply only Ball bearing (No 6201ZZ / 6201 2RS) with rubber/suitable seals/shield on both side for ceiling Fan complete all as specified and as directed (Make : HCH/NBC/TATA/FAG/SKF/NTN

Supply only Ball bearing (No 6202ZZ / 6202 2RS) with rubber/suitable seals/shield on both side for ceiling Fan complete all as specified and as directed (Make : HCH/NBC/ TATA/FAG/SKF/NTN

Supply only gun metal bush of existing size suitable for 1200/ 1400mm sweep ceiling fan complete all as specified and as directed.

Supply only capacitor 2.5 MFD including necessary connection complete all as specified and as directed. Make : Usha/ Epcos/ Havells/Bajaj/ TIBCON.

All as per Srl Item No 9 above but capacity 3.15 MFD

Supply only down rod 15mm bore, 300mm long fixed one end with mild steel U clamp, nut, lockable bolt, rubber reel, lock pin and other end having threaded/ drilled hole end, suitable nut, bolt, split pin and check nut or aluminium clamp duly white painted suitable for all size and makes of ceiling fan complete all as specified and as directed.

All as per Srl Item No. 11 above but 450mm long complete

All as per Srl Item No. 11 above but 600mm long complete

"Supply only" blade of 1200mm sweep of ceiling fan complete all as specified and as directed.

"Supply only" blade of 1400mm sweep of ceiling fan complete all as specified and as directed.

M&L for painting one coat of synthetic enamel paint (white) using spray machine painting on the surface of ceiling fan of 1200/ 1400mm sweep complete after preparation of surface i.e removing of old paint, cleaning, washing of surfaces, filling cavities with filler, cleaning dust and dirt all as specified and as directed by Engr-in-Charge

"Supply only" U clamp/ brass bracket assy with rubber reel with nuts, suitable size bolt, lock pin / split pin, lock washer suitable for ceiling fan clamp complete all as specified and as directed.

"Supply only" top and bottom canopy of plastic with steel screw suitable for rod for fan of 1200/ 1400mm sweep complete all as specified and as directed.

"Supply only" stator assy blank suitable for ceiling fan 1200mm complete all as specified and as directed.

Taking down carefully exhaust fan of any sweep, any size/make from any existing mounting height and transporting to GE (E) JRC for repair to workshop, for inspection and transporting back to accn from where taken down after repair complete all as specified and as directed

Fixing only the exhaust fan after repair/ maintenance upto any height upto 4.5 Mtr including connecting up with PVC wire and testing etcomplete all as directed.

M&L for complete Repair and maintenance of unserviceable exhaust fan of any sweep at work shop, incl dismantling complete the parts i.e. blades, fan cover, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, connecting wire, PVC connector and greasing/oiling etc assembling, cleaning, painting and testing of exhaust fan as directed. Note:- (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A; as supply only. (ii) Rewinding of stator will be measured and paid for separately under relevant item of Sch 'A'. (iii) Writing of MES Nos and painting of ceiling fan shall be measured and paid separately under relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge and contractor. (v) Cost of minor part i.e. cutter pin, PVC connector, screws shall be deemed to included in the cost of quoted rate.

M&L for rewinding stator of exhaust fan 450mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and as directed

All as per Srl Item No. 23 above but 380mm sweep complete.

All as per Srl Item No. 23 above but 300mm sweep complete.

All as per Srl Item No. 23 above but 230/250mm sweep any type.

Supply only ball bearing of existing exhaust fan suitable for 450mm sweep including necessary greasing complete all as specified and as directed. Make : NBC/ SKF/ Norma/FAG

"Supply only" ball bearing of existing exhaust fan suitable for 225/ 230mm to 380mm sweep any type including necessary greasing complete all as specified and as directed. Make : NBC/ SKF/ Norma/ FAG/ NTN

"Supply only" mounting legs with rubber suitable for any type of exhaust fan complete all as specified and as directed

"Supply only" steel blade suitable for exhaust fan 300mm sweep complete all as specified.

S&F exhaust fan louvers (louvers made of CRCA coated frame with flappers) suitable for 230mm sweep exhuast fan complete with necessary nut, bolt iron work complete.

S&F XPM Jaali for wall opening of exhaust fan of size 300mm/380mm/ 450mm sweep of suitable size as directed by Engr-in-Charge.

S&F in repair 50 Watt energy saving, environment friendly IP65 LED flood light luminaire with high efficacy fixed in bldg upto height upto 6 Mtrs complete all as specified and as directed by Engineer in charge. Make:- Philips/Bajaj/ Crompton/ Havells.

M&L for painting one coat of synthetic enamel paint (existing colour) using spray machine painting on the surface of exhaust fan any sweep complete after preparation of surface i.e removing of old paint, cleaning, washing of surfaces filling cavities with filler, cleaning dust and dirt all as specified and as directed by Engr-in-Charge

Taking down carefully air circulator of any sweep and size and transporting to workshop. Dismantling blades, opening for inspection, reassembling after repair and replacement of spares and transporting back to accn /bldg ( weher to be fixed) including hanging/ fixing and connecting up and testing etc complete all as specified and as directed. Note:- Unserviceable parts required for repair shall be measured separately under relevant items of sch 'A' as supply only.

M&L for rewinding motor of air circulator industrial type 400/ 450mm sweep with super enameled copper wire of existing specification, gauge and weight including insulating material complete all as specified and as directed

All as per Srl Item No 36 above but 600mm sweep complete.

Supply only ball bearing of existing number specifications/ size suitable for air circulator 450mm sweep of different makes including necessary greasing complete all as specified and as directed. Make : NBC/ SKF/ Norma/ FAG/ NTN/ HCH/ TATA.

Supply only ball bearing of existing number specification/ size suitable for air circulator 600mm sweep of different makes including necessary greasing complete all as specified and as directed. Make : NBC/ SKF/ Norma/ FAG/ NTN/ HCH/ TATA.

Supply only gun metal bush of existing size suitable for air circulator sweep upto 600mm complete all as specified and as directed.

S&F in repair exhaust fan PVC body 250mm sweep with shutter louvers complete all as specified & directed. Make:- Havells/ Bajaj/ Crompton/ USHA/ Orient.

Supply only flexible wire twisted three core of size 0.5 Sqmm copper conductor cable for making connections between ceiling rose and winding complete all as specified and as directed (Make : FINOLEX / HAVELLS/ Polycab/KEI )

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers (louvers made of powder coated frame having aluminium/ GI sheet flappers) complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering all as specified and as directed.

S&F in replacement Deco ultra slim linear LED tube lighting fixutre with co-extruded polycarbonate body environmental friendly enegy efficent ready to use pack 20 W LED batten, minimum lumen efficacy 100 lumen/watt, cool white, operating voltage 230V AC complete all as specified & directed by Engineer-in- charge. Make: Havells/ Bajaj/ Philips/ Crompton

S&F in repair frame suitable for fixing of T8 LED tubelight frame single side connection (suitable of item ser No 46) all as specified and as directed by Engineer in charge.

S&F in repair LED tube rod polycarbonate T8 with in built driver retrofit type single side connection with metal/ suitable heat sink having high efficacy more than 100 lumen/ watt complete all as specified and as directed by Engineer in charge. Note: Make of item Sr No 45 & 46 shall be same.

S&F in replacement Deco ultra slim linear LED lighting fixutre with co-extruded polycorbonate body environmental friendly enegy efficent ready to use pack 22W LED batten, minimum lumen efficacy 100 lumen/watt, cool white, operating voltage 230V AC complete all as specified & directed by Engineer-in- charge. Note: Item ser No 44 to 47 shall be use for LEDisation in OTM/Buildings. The Contractor shall have to provide the details of No of total point, existing LED point, light points converted into LED for the record beore claim of RAR/payment. Make:- Philips/ Bajaj/Crompton/ Havells.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade (IS-1239)15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved.all as specified and as directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

S&F in repair exhaust fan PVC body 200mm sweep with shutter louvers incl cutting holes complete all as specified & directed.

M&L for pressure die cast aluminium housing Polycarbonate body Bulk head light 10 watt, IP-66 complete all as specified and as directed. Make:- Bajaj/ Philips/CG.

S&F in repair powder coated sheet metal enclosure indoor type (size width 1200mm, height 800mm,depth 200mm) made out of 2mm thick CRCA sheet having independent compartments suitable for single phase energy meters-04 Nos) and MCB’s provided with front hinged shutters with locking arrangements and clear glass to visualize the meter reading without opening the compartment with sufficient working space in compartment; duly prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of suitable size from bus bar to meter compartment 04 Nos duly crimped with copper thimbles, duly powder coated having one number cable gland for suitable size of LT XLPE/ PVC cable entry at bottom complete all as specified and as directed and consisting with the following:- (a) Bus bar for 3 phase 4 wire system of 4 x 100 Amps (considering current carrying cap 1.5 Amp/ Sqm) rated insulated copper strip mounted on resin cast insulators in independent compartment having front open able shutter - One Set. (b) MCB , four pole, 415 volts, 63 Amps, 10 KA -One No. (c) MCB SPN 63 Amps, 10 KA C-curve-04 Nos. Note:- Existing meters shall be dismantled & re-fixed in panel by contractor and make cable connection properly through LT cable joint with lugs of suitable size rates are deemed to include for the same.

S & F in repair energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass/ Polycarbonate cover and suitable optics for uniform distribution of light 25 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection, efficacy min 100 Lumen per watt complete with GI pipe light shade of 25mm bore and MS clamp duly painted with two coat paint all as specified and as directed. Make:- Philips/ Bajaj/Crompton/ Havells.

Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit wiring, casing capping wiring or concealed conduit wiring) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, surface conduit only switch board outlets with sheets and other materials for taking credit of unserviceable light as per Sch of credit and keeping serviceable lights in safe custody for re-fixing under relevent items and making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved complete all as specified and as directed.

M&L for point wiring for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel boxes duly painted with anti corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cup washers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 54 above but for one fan point controlled by one switch complete all as specified

All as per srl item No. 54 above but for one bell point controlled by one bell push complete all as specified.

All as per srl item No. 54 above but for one light point controlled by 2 Nos, two way switch complete all as specified.

All as per srl item No. 54 above but for one socket outlet 5 Amps on independent board complete all as specified.

All as per srl item No. 54 above but for one socket outlet 5 Amps on the same board controlled by one switch complete all as specified.

All as per srl item No. 54 above but with 2.5 Sqmm (nominal area) FRLS PVC insuated unsheathed multi stranded copper conductor cable for one 3 Pin 15 Amp socket on independent board/ for metal socket industrial plug socket, including one 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.

S&F in replacement switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F in replacement socket out let 5 Amp, 2 in 1, 5 pin flush type complete all as specified.

M&L in replacement Socket outlet multi purpose 2 in 1, 5/6 pin, 5 & 15 Amps, flush type complete all as specified.

M&L in replacement Bell push switch, flush type 5 Amps, SP, 240 volts complete all as specified.

M&L in replacement Bell electric AC (Ding Dong) 240 volt SP complete all as specified.

S & F in repair for batten holder insulated body with matching colour back plate all as specified and as directed.

S & F in repair LED retrofit lamp 9 W , 6500K, 220-240V with base cap B-22 complete in decorative lights complete incl removing cover and re-fixing after replacing lamp all as specified and as directed

S&F in repair for ceiling rose surface type bakelite 65 x 50mm, three terminal complete all as specified.

S&F in replacement five step fan regulator, electronic type, single phase, including connection complete all as specified.

S&F in repair Decorative wall mounting light fitting suitable for 09 watt LED lamp complete with Brushed Nickel finish fixture with acrylic Diffuser suitable & including 1 x 09 watt LED lamp complete all as specified of Model FLORETINE WL 1LS B22 SS PPCP of make Havells ordering code LHFOAJE1TN1I060 or equivalent in crompton/Philips/Bajaj/Polycab.

S & F in repair New generation, 15 Watt LED post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs driver as light source complete all as specified and as directed.

M&L for replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 6 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 6.0 Sqmm (as specified) complete with any type of civil work involved to make good disturbed surfaces all as specified. NOTE:Two run of 6 sqmm wire and one run of 6 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit.

M&L for replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm complete with any type of civil work involved to make good disturbed surfaces all as specified. NOTE:Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit.

M&L for replacement of sub main wiring with four run of FRLS PVC insulated unsheathed multistranded copper conductor single core cable 6 Sqmm drawn through in and including PVC rigid non metalic concealed conduit (medium grade) and one run of FRLS PVC insulated unsheathed multistranded copper conductor single core cable (green colour) of size 6 sqmm with any type of civil work involved to make good disturbed surfaces complete all as specified. NOTE:- 1. Four run of 6 sqmm wire and one run of 6 sqmm wire as earth wire and PVC concealed conduit shall be measured as one unit. .

S&F in repair Vertical Loadline DB 4 way with Bus Bars, Neutral Links, blanking plates suitablle for fixing upto 125A MCCB as incommer and MCB for outgoing fixing in wall all as specified and as directed. Make for ser item No. 77 to 85 SIEMENS/Legrand/SCHNEIDER/Havells/ABB/ HAGER.

S&F in repair MCCB FP 125 Amp, 415 Volts with 16 KA breaking capacity suitable for vertical loadline DB item No 77 all as specified and as directed.

M&L in replacement for sheet metal DB for MCBs, SPN, 8 ways, double door, single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified.

M&L in replacement for sheet metal DB for MCBs, SPN, 12 ways, double door,single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified.

S&F in repair MCB SP 6 to 32 Amps, 10 KA, B curve complete all as specified and as directed by Engr-in-charge.

S&F in repair MCB SPN 40 Amps, 10 KA, B curve of complete all as specified and as directed by Engr-in-charge.

S&F in repair MCB SPN 63 Amps, 10 KA, B curve complete all as specified and as directed by Engr-in-charge.

M&L in replacement for sheet metal DB for MCBs, TPN, 6 ways, double door, single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified.

S&F in repair MCB TPN 63 Amps, 10 KA, C curve complete all as specified and as directed by Engr-in-charge.

Supply and Installation of Smart Single Phase Meter with the following specifications: (i) AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt GPRS communication with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED based circuitry. (ii) Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand (iii) Meter should have connect / disconnect functionality operatable from prepaid billing software. (iv) Meter load limit should be settable remotely from the software. (v) The meter should support communication as per IS 15959 (Part 2) 2011. (vi) Meter shall detect First Breath (Power on) and Last gasp (Power Off) condition and communicaton to the software. (vii) The meter should support open communication protocol DLMS with the software. (viii) The system should be able to run in Prepaid or postpaid billing mode as and when required based on defined processes by the department.

(ix) The rate dia includes cost of configuration & software & communication module or any other item required for satisfactory working of meters in prepaid and postpaid mode. MAKE : HPL or suitable make compatible as approved by Command/ E-in-C branch to be integrated with existing smart meter software/ module installed at GE (East) JRC. Note:- (a) The meters would carry 05 years warranty. (b) The quoted rate include the cost for handing over details of newly installed meters with meter Sr No, date & date of installation and intial reading.

S&F in repairs flexible LED strip uses for high brightness as the light source for outdoor application complete of make Havells or equivalent in specified makes complete all as specified and as directed

S&F in replacement Deco ultra slim linear LED tube lighting fixutre Model LED PRIDE PLUS TRIYCA three colour (Warm white/ Cool white/ natural white) CCT change with toggle switch with co-extruded polycorbonate body environmental friendly enegy efficent ready to use pack 20 W LED batten 6500K complete all as specified & directed by Engineer-in- charge. Make: Model LED PRIDE PLUS TRIYCA , ordering code LHEXAXPNIN1W020 of Havells or equivalent in specified makes

S&F in replacement LED PLUS INVERTER BATEN LED tube lighting fixutre Model LED PRIDE PLUS INVERTER havinf lithium Ion battery with charging time 8 to 10 hours and back up time upto 4 hours extruded polycorbonate body environmental friendly enegy efficent ready to use pack 20 W LED batten 6500K complete all as specified & directed by Engineer-in- charge. Make: Model PRIDE PLUS INVERTER 20W, 6500K , ordering code LHEXACP7FN1WC020 of Havells or equivalent in specified makes

S&F Aesthetically designed LED batten having extruded Aluminium housing with Microwave motion sensor technology for energy efficiency to work on motion lighting fixutre of 20 watt having Item code Model LUMILINE SMART Batten, order code LUMILINESMART20WLED865PCWH of Havells or equivalent in specified makes complete all as specified & directed by Engineer-in- charge.

S&F LED inverter lamp 12 watt having lithium Ion battery with charging time 8 to 10 hours and back up time upto 4 hours e complete including removing light cover and reassembling/ fixing cover after fixing lamp all as specified & directed by Engineer-in- charge. Make: Havells/Philips or equivalent in specified makes

M&L for Louvers made of Powder coated CRCA sheet having aluminium/ GI sheet flappers suitable for size 300mm complete of make SRV Electricals (mfg by Paul Electrucals) as approved by GE or equivalent in specified make complete.

AGGARWAL ENGINEERING CO (BID ID -3117389)

CHOUDHARY AND SONS (BID ID -3117636)