Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | MS FORWARD BUILDERS E 32/10/KKD L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING L1 BIDDER | |
| 2 | L2₹21.9 L+₹17,619 (0.81%)Rejected-AOC | L2 | Rejected-AOC HIGHER BID VALUE | |
| 3 | L3₹22.2 L+₹49,980 (2.30%)Rejected-AOC ANURAGPUR PO PANAGARH BAZAR DIST BURDWAN WEST BENGAL 713 148 | PANAGARH BAZAR | BURDWAN | WEST BENGAL | 713148 | L3 | Rejected-AOC HIGHER BID VALUE | |
| 4 | L4₹22.9 L+₹1.2 L (5.56%)Rejected-AOC | L4 | Rejected-AOC HIGHER BID VALUE | |
| 5 | L5₹24.9 L+₹3.3 L (15.0%)Rejected-AOC | L5 | Rejected-AOC HIGHER BID VALUE |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PANAGARH
HQ CWE PANAGARH, MES, PO - PANAGARH, DIST - BURDWAN, WB, PIN - 713420
REPAIR / MAINT OF WATER SUPPLY PIPE LINES AND ALLIED WORKS AT PH-I AREA UNDER GE PANAGARH
2022_MES_565468_1
8827/E8
Open Tender
Civil Works
Item Rate
180 days
PANAGARH
Pl refer Tender Documents
7 documents required · 7 mandatory
₹500
GE PANAGARH
₹66,000
Yes
20 Jan 2023
26 Nov 2022
21 Dec 2022
26 Nov 2022
19 Dec 2022
12 Dec 2022
Amount
Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in soft/lose soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line, complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm thick, complete all as specified and as directed.
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and as directed.
Taking up CI/DI water main (incl all fitting) with spigot & socket ends and lead joints incl burning out & recovering lead from pipe of 80 mm bore for relaying / rerouting of serviceable pipe after cleaning, complete all as specified and as directed.
All as per Item No. 4.00 here-in-before but 100 mm bore.
All as per Item No. 4.00 here-in-before but 150 mm bore.
All as per Item No. 4.00 here-in-before but 200 mm bore.
Relaying of DI/CI/GI pipe 80 mm bore in trenches/ over the masonry pillars after cleaning thoroughly including fittings, complete all as specified and as directed.
All as per Item No. 8.00 here-in-before but 100 mm bore.
All as per Item No. 8.00 here-in-before but 150 mm bore.
All as per Item No. 8.00 here-in-before but 200 mm bore.
M&L DI pipe of 80 mm bore with spigot and socket end rubber gas cate joint(titon) centrifugally cast class k-7 conforming to IS 8329-2000 laid in trenches/ on surface/ over masonry pillar and connection to old or new position, complete all as specified and as directed. Cost of joint included in the qoted rate.
All as per Item No. 12.00 here-in-before but 100 mm bore.
All as per Item No. 12.00 here-in-before but 150 mm bore.
All as per Item No. 12.00 here-in-before but 200 mm bore.
Taking up or down 80 mm bore steel tubing and connection including cleaning for relaying or removal to store from trenches/wall surfaces, complete all as specified and as directed.
All as per Item No. 16.00 here-in-before but bore of Pipe 50 mm.
All as per Item No. 16.00 here-in-before but bore of Pipe 40 mm.
All as per Item No. 16.00 here-in-before but bore of Pipe 25 mm.
All as per Item No. 16.00 here-in-before but bore of Pipe 20 mm.
Relaying/re-fixing old 80 mm bore GI tubing or in floor/pillar/wall in new or old position, complete all as specified and as directed.
All as per Item No. 21.00 here-in-before but bore of Pipe 50 mm.
All as per Item No. 21.00 here-in-before but bore of Pipe 40 mm.
All as per Item No. 21.00 here-in-before but bore of Pipe 25 mm.
All as per Item No. 21.00 here-in-before but bore of Pipe 20 mm.
Supply and laying of UPVC (SCHD 80) concealed pipes 15 mm outer dia, UV stabilized and having thermal stability for hot & cold water supply all fittings laid in trenches / wall including all fittings complete including taking out old unservicable pipe, complete all as specified and as directed.
M&L 80 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection in old or news position including fitting like socket /Union/Tee/Reducer Nipple etc. complete required will be supplied by Contractor, rate for the same is included in the item rate quoted, complete all as specified and as directed.
All as per Item No. 27.00 here-in-before but bore 50 mm.
All as per Item No. 27.00 here-in-before but bore 40 mm.
All as per Item No. 27.00 here-in-before but bore 25 mm.
All as per Item No. 27.00 here-in-before but bore 20 mm.
M&L DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot. All socket and flanged upto bore of 200 mm, complete all as specified and as directed.
M&L rubber gasket joint in repair for 80 mm bore CI/DI Pipe with Spigot & Socket ends after connection of old and new position, complete all as specified and as directed.
All as per Item No. 33.00 here-in-before but size 100 mm bore.
All as per Item No. 33.00 here-in-before but size 150 mm bore.
Taking of existing US CI Sluice valve of any size, any type upto 150mm bore from 80 mm bore, complete all as specified and as directed.
S&F 80 mm bore CI Sluice valve PN - 1.6 IS 14846-2000 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position, complete all as specified and as directed.
All as per Item No. 37.00 here-in-before but 100 mm bore.
All as per Item No. 37.00 here-in-before but 150 mm bore.
All as per Item No. 37.00 here-in-before but 200 mm bore.
Refixing of Sluice valve 150 mm bore after taking out, refacing of valve spindle,re grinding, including taking part and reassembling, as per existing and complete descaling and proper functioning at site including replacement of new nuts, bolts, washers and gasket as required at site, complete all as specified and as directed. Note : New parts will be measured and paid separately under Item No. 46.00 here-in-after reassembling, testing and re-fixing complete all as directed.
Supply MS Spindle (Heavy duty) shaft with Gutka (Male & Female) with connecting fitting suitable for 100 mm to 250 mm Sluice valve, complete all as specified and as directed. Note : Fixing rate deemed to be included in the Item No. 41.00 here-in-before.
All as per Item No. 42.00 here-in-before but size 100 mm bore.
S&F for 50 mm bore gate valve gum metal class-II screwed down high pressure with clutch handle screwed both ends for Iron pipe including taking out of old unserviceable gate valve, complete all as specified and as directed.
All as per Item No. 44.00 here-in-before but size 40 mm bore.
All as per Item No. 44.00 here-in-before but size 25 mm bore.
All as per Item No. 44.00 here-in-before but size 20 mm bore.
M&L for in repair/rectification of leakage in existing rising/delivery CI/DI Pipe Spigot/ socketed end of 100 mm bore including necessary earth work (i.e. excavation, removal & refilling, of trench), Pumping out water from the ditch and rectify the defects by taking out of existing lead and rejoining The same by using necessary additional lead, Lead Wool, Spun Yarn & etc including testing, commissioning of CI Pipe line complete all as directed Spun yarn & other arrangement for rectification of said defects is included in the cost of item complete.
All as per Item No. 48.00 here-in-before but size 150 mm bore.
M&L for in repair/rectification in existing rising/ delivery CI/GI pipe line flanged end type of 100 mm bore incl necessory earth work (i.e. excavation, rubber sheet nut & bolts etc and other arrangement for rectification of said deffects is included in the cost of item complete Removal and refilling of trenches). Pumpimg out water from the ditch and rectify the deffects by taking out of existing rubber gasket / fibre sheet, nut & bolt etc and rejoining the same by using new one incl testing, commissioning of CI pipe line, complete all as specified and as directed.
All as per Item No. 50.00 here-in-before but size 150 mm bore.
S&F for straight plain brass ferrules (or connecting screws) screwed bolt ends of 20 mm bore Pipe, complete all as specified and as directed.
All as per Item No. 52.00 here-in-before but size 25 mm bore.
Supply and fixing Cast Iron air released valve with two air outlet (IS 14845-2000 DK fig-4)and fixing up in water main of 150 mm dia with all fitting accessories including taking out of old U/S released valve, complete all as specified and as directed.
Supply and Fixing in repair cast iron Non Return Sluice Valve heavy duty with flanged ends, brass spindle any pattern with Brass spindle with GM Check Nut confirming to IS including jointing and jointing material, nuts, bolts, and washer etc. complete all as specified and as directed on size 150 mm.
M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.
M&L PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in coping and including weathering, slightly rounded or chamfered angle and throating, complete all as specified and as directed.
M&L for brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM 1:6, complete all as specified and as directed.
M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement), complete all as specified and as directed.
M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 600x600x600 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc. all as directed by Engr-in-Charge.
M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 900x900x900 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc. all as directed by Engr-in-Charge.
M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 1200x1200x900 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc. all as directed by Engr-in-Charge.
S&F in repairs PVC Tank Cover (Best Quality) Suitable for Cylindrical Vertical Storage Tank of sizes 500 Ltrs to 2000 Ltrs capacity incl tank holes hinges fitted any type complete all as specified and as directed. Note : Size of Covers :- (a) 500 Ltrs - 100 Nos. (b) 1000 Ltrs - 50 Nos.
S&F of 500 Ltrs capacity tank rotational moulded polyethylene water storage tank (Cylindrical, vertical with closed top with three layer) conf to IS complete including provision of all inlet,outlet,overflow and drain pipe fitting complete all as specified and as directed by Engineer-in-Charge.
All as per Item No. 64.00 here-in-before but capacity 1000 ltrs.
All as per Item No. 64.00 here-in-before but capacity 2000 ltrs.
S&F of high pressure PTMT ball float valve suitable for size of 25 mm dia with epoxy coated aluminum rod & HD plastic ball screwed for iron pipe including GI Fitting as reqd after taking out Old U/S item, complete all as specified and as directed.
All as per Item No. 67.00 here-in-before but size 20 mm bore.
S&F framed work such as angle of different size gusset plate (mildsteel) and cut to shape drilled and conter inner for screwing inclnbending and weldidng angle as necessary confirming to Fe-410-W(Gde E-250) Quality-B including dismantling, complete all as specified and as directed.
S&F 3.15mm thick mild steel plain black sheet for earth, covering to door shutters, and covering to valve pit frame cut size edges beaded as directed , holes punched, inclding rounded head serews with plain 40mm lap, joints or welded/ reveted seams including bending, turning up mitred angle, stoped ends, outlets as required and including dismantling, complete all as specified and as directed.
Material and Labour for cutting wild growth i:e grass,shrubs, bushes etc from ground level by using grass cutting machine or manually in the periphery of pump house area including removing grass from fences ,removing the cut materials to outside the pump house area and depositing where directed, complete all as specified and as directed. Note : T&P and cutting tools are inclusive in above quoted rate.
Schedule of Credit
M/S TRIVENI BUILDERS
UNIQUE ENTERPRISE
m/s friends construction
BISWAS ENTERPRISE
M/S BISWAS AND KUNDU CONSTRUCTION
M/S Ali Trading Co
M/s sadhan kumar mukherjee
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .