Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.1 LAccepted-AOC | L1 | Accepted-AOC Awarded being L1 bidder | |
| 2 | L2₹43.6 L+₹1.5 L (3.60%)Rejected-Finance | L2 | Rejected-Finance Not being L1 bidder | |
| 3 | L3₹46.5 L+₹4.4 L (10.5%)Rejected-Finance | L3 | Rejected-Finance Not being L1 bidder | |
| 4 | L4₹46.9 L+₹4.8 L (11.5%)Rejected-Finance | L4 | Rejected-Finance Not being L1 bidder | |
| 5 | L5₹50.0 L+₹7.9 L (18.8%)Rejected-Finance | L5 | Rejected-Finance Not being L1 bidder |
Tender Value
₹43.7 L
EMD Value
₹87,500
Closing Date
11 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER SOUTH UDHAMPUR
Udhampur
CONSTR OF OFFICE FOR COL GS FP AND OIC BUDGET CELL INCLUDING CLERICAL STAFF OF FP CELL AT HQ NC UNDER GE SOUTH UDHAMPUR
2024_MES_650012_1
GE/S(U)- /2024-25
Open Tender
Civil Works
Works
240 days
GE SOUTH UDHAMPUR
As per NIT
9 documents required · 9 mandatory
₹500
GE SOUTH UDHAMPUR
₹87,500
25 Jun 2024
13 Apr 2024
13 May 2024
13 Apr 2024
11 May 2024
27 Apr 2024
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil etc complete all as specified and directed.
Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc, and area n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
Excavation over areas exceeding 1.5 mtr in depth but not exc 3.0 mtr depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in any type of soil complete all as specified and directed.
Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm inany type of soil complete all as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.
PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.
RCC M-25 (20mm graded aggregate) as in foundations footings, plinth beams etc complete all as specified and directed.
RCC M-25 (20mm graded aggregate) as in columns, pillars etccomplete all as specified and directed.
RCC M-25 (20mm graded aggregate) as in beams, lintels etc complete all as specified and directed.
RCC M-25 (20mm graded aggregate) as in chajjas etc complete all as specified and directed.
RCC M-25 (20mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
RCC M-25 (20mm graded aggregate) as in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified and as directed.
TMT bars upto 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays beteen floors and beams finished rough surfaces of concrete complete all as specified and directed.
Formwork to chajjas, chullah hoods, similar items including edges complete all as specified and directed.
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.
Flat formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) complete all as specified and directed.
Brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:6 complete all as specified and directed.
Half brick wall with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.
Hardcore of broken stone or boulders of gauge exc. 63mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.
75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and as directed.
Vitrified ceramic tiles(Double charge glossy finish), area of each tile exc 0.42sqm but not exc 1.00 Sqm, 10mm thick (square or rectangular) of superior quality as in floor or wall surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
Glazed coloured Ceramic tiles in vertical surface 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and directed.
75mm th PCC 1:3:6 type C-2 as plinth protection, finished even and fair without using extra cement complete all as specified and directed.
Providing and fixing 10mm thick plaster of paris designer ceiling (Gypsum anhydrous) (cop/moulding), moisture resistant to flat surface over metal frame work and reinforced with G.I. wire including intermediate, perimeter channel wall channel, along with nuts and bolts connecting plates for gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and as directed by Engr - in - Charge. Note: (a) Design of paneling board as approved by Engr - in - Charge (b) GI grid, hanhing system shall be of same manufacture complete all as specified and directed.
Solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed.
Venetian blinds of approved make, vertical/horizontal type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.
Supply and fixing factory made uPVC white/coloured Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white/coloured fixed glazed window/ventilator/Partition walls made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. Comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).
S&F factory made uPVC white/coloured Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made
Sheet glass 5.5mm thick of one side view or etching on glass as approved by Engr in Charge, ordinary quality and glazing with beads fixed with metal panel pins, EPDM washers or connected accessories in each pane complete all as specified and as directed
12mm Toughned glass(etching desgin on glass as approved by Engr in Charge) as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required including all accessories like 18" SS handle, floor machine, locking system and all connected accessoried etc complete all as specified and as directed.
Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube suppling and fixing in opening as per specification & drawing complete all as specified and as directed.
Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified.
Stainless steel butt hinges medium weight 100 mm long complete all as specified.
150 mm long brass mild steel barrel tower bolt of extruded section complete all as specified and as directed.
150 mm length brass mild steel handles fabricated type anodised complete all as specified and as directed.
Kitchen cabinet/cupboard in required size at site made out 18 mm thick one side decorative lamination sheet consisting of carcass/HDMR board 18/20 mm thick PVC sheet/sunmica laminated on one side & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet all reqrired brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work/sliders complete as per make and specification mention as per drawing with locking arragement approved by Engr-in-Charge. Colour as approved by GE. (Make: Rajshree/Sintex or equilent) complete all as specified and as directed.
PVC steel catcher of superior quality all as specified and directed by Engr in charge or Garrison Engineer
Hetich softcloser hinges of stainless steel premium quality complete all as specified and as directed.
Fancy type Brass handles 100mm size fixed with screws, complete all as specified and as directed.
30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface fair and even without using extra cement complete all as specified & directed.
Rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface fair and even without using extra cement complete all as specified & directed.
Rendering 5mm thick on concrete surfaces in CM 1:3 as on ceiling all as specified and as directed.
APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyster) manufactured by M/S IWL Ltd or'Shaliplas' (polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non weven polyster matt,with fusable finish laid over compatable bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including preparation of surface, complete all as specified and as directed.
Applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubed with emery paper and make surface good and clean complete all as specified and directed.
Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.
Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.
Applying two coats of synthetic enamel ordinary tint paint including red oxide primer and preparation extra complete on new steel or iron surfaces of any description, over 10cm in width or grith, not otherwise described complete all as specified.
Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple complete all as specified and as directed.
Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and as directed.
20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and as directed.
25mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and as directed.
PVC connection 15 mm size with PTMT nuts 600mm long complete all as specified and as directed.
Countertop vitreous chinaware wash hand basin (WHB) white size 564mm x 425mm x 140mm complete 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and as directed. Make : Jaquar Cat Part No KUS-WHT-35935 or equivalent in Hindware/Cera
5 mm thick looking mirror of required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glass complete all as directed.
Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc (including flushing cistern & flush pipe) complete in all respect all as specified Make : Jaquar Cat Part No LYS-WHT-38851S300UFSMN or equivalent in Cera/Hindware
15 mm dia WHB/Sink mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed. Make - Jaquar Cat No KUP-35011BPM or equivalent in Cera/Hindware
Sinks with draining board/double bowl sink made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.
Vitreous china half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush Pipe, grating & union for discharge Pipe complete all as specified. Make : Jaquar Cat Part No URS-WHT-13253O or equivalent in Cera/Hindware
Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified.
15 mm bore Bib tap CP fency type long body complete all as specified and directed. Make : Jaquar Cat Part No CON 107KN and equvalent in CERA/Hindware.
15 mm dia Angle valves/ stop cock ,fancy type and chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed. Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/Cera
Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specified and directed.
Chromium plated toilet paper holder complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA.
600 mm long brass chromium plated towel rail fancy type complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA.
Soap dish complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA.
S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.
110 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as specified and as directed.
75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall or in floor complete all as specified and as directed.
110 mm PVC (SWR) bends any redius with access door complete all as specified and as directed.
PVC (SWR) gully trap 75/110 mm, settting and jointing with solvent cement complete all as specified and as directed.
Walling of random rubble uncoursed well bonded bedded and solidly hearted bult in CM 1:6 complete all as specified and as directed.
Cement concrete 1:2:4 type B1 (20 mm readed stone aggregate) as in coping kerb etc including necessay form work complete all as specified.
Raised pointing to random rubble or polygolal rubble uncoursed of brought upto courses in cm 1:4 complete all as specified.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.
Vitrified tiles (Dura stone heavy duty) of size n exc 0.36 Sqm of 10-12mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified.
Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and directed.
150 mm dia SGSW pipe laid in trenches and jointed complete with collars complete all as specified and as directed.
Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type D2 (1:4:8) for 150mm dia pipe complete all as specified and as directed.
Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified.
Plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed.
PCC 1:2:4 type B0 (12.5mm graded aggregate) as in coping, benching and similar work etc including necessary form work complete all as spcified and directed.
Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish complete all as specified and as directed.
All as per srl item No 94 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.
All as per srl item No 94 but for 3 pin 6 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.
All as per Srl item No 94 but for 3 Pin 15 Amps socket outlet independent with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.
S&F for modular switch 6 Amps single pole one way 230 volt with outer strip complete all as specified and directed by Engr In charge or Garrison Engineer.
S&F for modular switch 16 Amps single pole one way 230 volts with outer strip complete all as specified and directed by Engr In charge or Garrison Engineer.
S&F for modular socket 3 Pin 6 Amps flush type with outer strip complete all as specified and directed by Engr In charge or Garrison Engineer.
S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps flush type with outer strip complete all as specified and directed by Engr In charge or Garrison Engineer.
M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge or Garrison Engineer.
S&F Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S & F MCCB Three Pole & Neutral capacity of 125 amps 415 volts rupturing capacity 16 KA complete all as specified and directed.
S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S & F of MCB Single pole and neutral 240 volt any rating from 40 amps 'C' series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.
S & F of MCB single pole 240 volt any rating from 10 to 40 amps 'C' series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.
S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete
S&F 36W (2 x 2) LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and directed by Engineer-in-Charge or Garrison Engineer.
Supply and fixing LED luminaire 15 watt, 220 V AC recess/surface mounted downlighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge or Garrison Engineer.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection all as specified and direceted by Engr-in-charge or Garrison Engineer.
Supply and fix ceiling fan, AC single Phase. 230V of size 1200mm sweep with, blades, and frame along with all electrical wire connection all as specified and direceted by Engr-in-charge. Make:Havells/Bajaj/CG
Material & Laying in trenches or passing through pipe/on wall 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 3.5 core size complete all as specified and directed.
Supply and fixing in GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles acomplete all as specified and directed.
Point wiring for one light/ fan/bell point controlled by one switch using 4 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 4 Sq mm as earth wire stranded and conected to earth dolly as specified. Note:- Cutting and making same the wall patches after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.
S&F single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 25 Amps with indicator of complete all as specified and directed.
s l sharma and sons
VIRINDER SINGH
M/S SHREE RAM DUBEY AND SONS
RAJ MOHD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .