Construction of Balance Work of Library with Livelihood Hall and Knowledge Hub at Talcher, Angul.

Sl No Description of Item Schedule Amount Non-Schedule Amount Total Amount

method with rotavator at OMC, and compacting with vibratory roller to

achieve the desired density complete as per Clause 401 of MoRT&H

Specifications for Road & Bridge works (4th Revision)

Filling in foundation, trenches and plinth with river sand, well watered

and compacted in layers of 0.3 mtr, with top surface dressed and

11 5 leveled to proper gradient including cost of all materials, conveyance, cum 530.26 915.36 0.00 485380.79

all taxes and royalties, loading and unloading, including cost of all

labour, sundries, T & P etc. All complete as per directions of the

Engineer -in-charge.

Supplying and fixing of 80mm thick cement concrete interlocking paver

block of M-40 grade of approved make, design, colour and size made by

12 6 Block making machine with proper compaction laid in required pattern sqm 5302.63 847.14 0.00 4492049.62

etc. complete in all respect conforming to IRC SP - 63:2018. (SOR

2022: Page No 233, Item No: 2, New Miscellaneous Items )

Supplying and fixing of Pre cast kerb stone of size 300mm x300mm x

150mm of M-30 grade of approved make, design, colour and size made

13 7 by Block making machine with proper compaction fixed in required mtr 3760.73 226.35 0.00 851235.76

pattern etc. complete in all respect conforming to IS 5758:1984 (SOR

2022: Page No 233, Item No: 3, New Miscellaneous Items )

14 Paver Road (Parking)

Construction of granular sub-base by providing Close graded Granular

subbase Grading -III material as per table 400-1, spreading in uniform

layers with motor grader on prepared surface, mixing by mix in place

method with rotavator at OMC, and compacting with vibratory roller to

achieve the desired density complete as per Clause 401 of MoRT&H

Specifications for Road & Bridge works (4th Revision)

Filling in foundation, trenches and plinth with river sand, well watered

and compacted in layers of 0.3 mtr, with top surface dressed and

16 9 leveled to proper gradient including cost of all materials, conveyance, cum 75.72 915.36 0.00 69311.34

all taxes and royalties, loading and unloading, including cost of all

labour, sundries, T & P etc. All complete as per directions of the

Engineer -in-charge.

Supplying and fixing of 60mm thick cement concrete interlocking paver

block of M-30 grade of approved make, design, colour and size made by

17 10 Block making machine with proper compaction laid in required pattern sqm 757.17 973.84 0.00 737365.89

etc. complete in all respect conforming to IRC SP-63:2018. (SOR 2022:

Page No 233, Item No: 1, New Miscellaneous Items )

Supplying and fixing of Pre cast kerb stone of size 600mm x300mm x

150mm of M-30 grade of approved make, design, colour and size made

18 11 by Block making machine with proper compaction fixed in required mtr 5047.84 347.47 0.00 1753990.23

pattern etc. complete in all respect conforming to IS 5758:1984 (SOR

2022: Page No 234, Item No: 4, New Miscellaneous Items )

19 SUB TOTAL 15179704.89

20 B. LANDSCAPE

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface with

22 12 light roller make the surface smoothen and light waterning with sprinkler SQM 4235.73 0.00 252.99 1071605.80

and maintenance for 30 days or more till the grass establish properly, as

per direction of officer-in-charge. (Ref: DSR 2020, Sub Head:2.0:

Horticulture and Landscaping, Sl. No. 2.33, Pg. No.-91)

Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty

23 13 shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic EACH 700.00 0.00 23.60 16520.00

Pot & as per direction of the officer-in-charge.

Providing and stacking of Michelia champa (Golden Champa) of height

24 14 90-105 cm. in earthen pots of size 25 cm as per direction of the officer- EACH 50.00 0.00 106.20 5310.00

Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary

Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa,

25 15 Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, EACH 100.00 0.00 47.20 4720.00

Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size

of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

26 16 Lantana camara flower and bud in the field stock EACH 200.00 0.00 118.00 23600.00

30 C. RCC PLATFORM

Earth work in all kinds of soil within 50m lead and 1.5m lift including

31 rough dressing and breaking clods to maximum 5cm. To 7cm. And

laying in layers not exceeding 0.3m in depth and as per specification

Filling in foundation, trenches and plinth with river sand, well watered

and compacted in layers of 0.3 mtr, with top surface dressed and

37 20 leveled to proper gradient including cost of all materials, conveyance, CUM

all taxes and royalties, loading and unloading, including cost of all

labour, sundries, T & P etc. All complete as per directions of the

Engineer -in-charge.

Digitally signed by JAYA

Providing and laying plain cement concrete of proportion (1:4:8) in

foundation and floors using 4 cm. size black hard crusher broken granite

stone metal and screened and washed sharp sand for mortar of

approved quality and from approved quarry including hoisting, lowering,

laying concrete, ramming, watering and curing etc. complete to required

levels laid in layers not exceeding 15 cm. thick in each layer including

cost, conveyance, royalties of all materials and cost of all labours,labour

cess, T&P etc complete as per the direction of the Engineer -in-charge.

42 Flooring area pcc CUM 38.29 8852.73 0.00 338970.88

R.C.C. work M-25 grade with 20mm and down grade black hard granite

(crusher broken) stone chips including centering and shuttering work.

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel

of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL

/ SHYAM STEEL (grade Fe-500D) etc. including bending, binding,

welding and jointing if necessary and tying the grills and placing in

position as required for R.C.C. Work and for providing fan hooks as

50 23 required, hoisting, lowering, laying including cost, conveyances, taxes of QNTL 85.15 12278.91 0.00 1045548.95

M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour

required for the work for bending, binding and tying the grills in all floors

with labour cess etc. (payment will be made on standard weight of

B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification

& direction of Engineer -in-charge.

Fixing granite tiles of approved dimension area above 0.4 sqm (20mm

thick) in floor, treads of steps and landing on 20mm thick bed of cement

mortar (1:4) jointed with neat cement slurry mixed with pigment to

match the shades of the tiles including rubbing and polishing etc.

complete with cost, conveyance, royalties of all materials complete in all

respects as per direction of Engineer -in-Charge.

52 SUB TOTAL 4151629.07

53 D. TOILET BLOCK

Earth work in excavation of foundation in all kinds of soil within 50m

lead and 1.5m lift including rough dressing and breaking clods to

maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in

depth and as per specification complete.

Filling in foundation, trenches and plinth with river sand, well watered

and compacted in layers of 0.3 mtr, with top surface dressed and

57 26 leveled to proper gradient including cost of all materials, conveyance, CUM 27.52 915.36 0.00 25190.81

all taxes and royalties, loading and unloading, including cost of all

labour, sundries, T & P etc. All complete as per directions of the

Engineer -in-charge.

Providing and laying plain cement concrete of proportion (1:3:6) in

foundation and floors using 4 cm. size black hard crusher broken granite

stone metal and screened and washed sharp sand for mortar of

approved quality and from approved quarry including hoisting, lowering,

laying concrete, ramming, watering and curing etc. complete to required

levels laid in layers not exceeding 15 cm. thick in each layer including

cost, conveyance, royalties of all materials and cost of all labours,labour

cess, T&P etc complete as per the direction of the Engineer -in-charge.

Supplying diluting and preparing chemical emulsion like imidacloprid

30.5% SC or other chemicals approved by central insecticides Board or

as directed by the manufacturer and spraying the mixture uniformly by

sprayer as per- constructional Anti-termite Treatment confirming to IS

6313 (PART-II) and creating a chemical barrier under and around the

column pits, wall tranches, basement excavation top surface of plinth

filling juction of wall and floors along with external perimeter of the

building expansion joints. surrounding the pipes and conduits etc. at the

rate of 7.5liter per sqm on vertical surface and 5.0 liter per sqm on

horizontal surfaces, 50% of the emulsion to be filled in the holes made

in trenches at 150mm center to center (or as directed by the

manufacturer) including the cost of all materials. cost of all labour,

conveyance, loading, unloading, T&P, Etc. all complete as per the

direction of Engineer -in-Charge.

R.C.C. work M-30 grade with 20mm and down grade black hard granite

(crusher broken) stone chips including centering and shuttering work.

61 A Foundation and plinth 5.18 10396.56 0.00 53854.20

64 Ground Floor

67 C Lintel for openings 1.72 20977.24 0.00 36080.86

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel

of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL

/ SHYAM STEEL (grade Fe-500D) etc. including bending, binding,

welding and jointing if necessary and tying the grills and placing in

position as required for R.C.C. Work and for providing fan hooks as

71 30 required, hoisting, lowering, laying including cost, conveyances, taxes of QNTL 32.14 12278.91 0.00 394644.08

M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour

required for the work for bending, binding and tying the grills in all floors

with labour cess etc. (payment will be made on standard weight of

B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification

& direction of Engineer -in-charge

Providing Fly ash bricks masonry work using (250mmx120mmx80mm

size) having crushing strength not less than 75Kg/Sqcm in cement

mortar (1:6). Immersing the bricks in water before use in all necessary

72 31 projection splays cutting, circular moulding, corbelling etc. Including cost CUM 344.62 7745.10 0.00 2669116.25

of conveyance, taxes & royalties, loading and unloading of all materials

& cost of all labour, scaffolding, watering & curing, sundries, T & P etc.

complete as per the direction of Engineer -in-charge.

Digitally signed by JAYA

Providing & fixing Greenlam Sturdo Vibrance Serene Toilet Cubicle (of

following standard dimension which includes 600mm door size width)

made of heat, bacteria, water, chemical, scratch, impact and anti

bacterial, anti virus, anti fungal resistant 12mm thick solid compact

laminate panels tested by Shriram Test House. Finish of the compact

laminate should be Suede / *Raw Silk, which includs doors, pilasters &

intermediate panels finished with approved texture/shade as per the

detail drawings & as per IS 2046 (Indian Standard) and as per fire

retardant BS-476/97 standard. The product should have Green Guard

Certificate. Reduction of virus in 2 hours and 24 hours when tested by

ISO 21702: 2019 standard. This also includes providing and fixing in

position necessary hardware made out of Nylon Polymide Grade-6 &

Aluminium powder coated top rail as per manufacturer ’s specifications &

73 32 Architects instructions like (1) Nylon Door Knob, (2) Nylon Gravity NOS 3.00 59838.39 0.00 179515.17

hinges, (3) Nylon Thumb turn lockset indicators, (4) Aluminum Powder

Coated Top Rail, (5) Nylon Coat Hooks, (6) U-Channels, (7) Nylon

Adjustable Foot, (8) Noise Deafening Tape etc. (9) Screws & wall Plugs.

The top fitting should consist of Aluminium Powder Coated top rail which

will get fixed with Mid & End pilasters. All other hardware & screws will

of stainless steel in 304 Grade with satin finish. Top rail is extruded

Aluminium will be powder coated or anodized (Grade 6063 Micron

Aluminium). All pilasters are supported by grade-6 Nylon Polymide

Thermoplastic palm design pedestal footing with non corrosive steel

inserts. The base diameter 65mm and neck diameter of 33mm anchored

to the floor with grade 304 satin finish stainless steel screws with push

fit capping at a clearance height of 150mm. Model is Heat and Bacteria

Resistant Polymide in which aluminium U-Channel will be used for the

Ground of Floor

intermediate panels to the wall.

Providing 16 mm thick cement plaster with cement mortar of mix (1:6)

with screened and washed sharp sand for mortar and finished smooth to

the rough surface of walls in all heights after racking out joints including

75 33 watering and curing, rounding of corners, providing grooves where ever SQM 81.90 377.42 0.00 30911.02

necessary with cost, conveyance, royalties of all materials with cost of

all labour,labour cess, T&P, and scaffolding required for the work etc.

complete in all respect as directed by the Engineer in charge.

Providing 12 mm thick cement plaster with cement mortar of mix (1:6)

with screened and washed sharp sand for mortar and finished smooth to

the rough surface of walls in all heights after racking out joints including

76 34 watering and curing, rounding of corners, providing grooves where ever SQM 109.13 262.17 0.00 28611.16

necessary with cost, conveyance, royalties of all materials with cost of

all labour,labour cess, T&P, and scaffolding required for the work etc.

complete in all respect as directed by the Engineer in charge.

Providing 6 mm thick cement plaster with cement mortar of mix (1:4)

with screened and washed sharp sand for mortar and finished smooth to

R.C.C. work after closed deep chipping & slurry treatment including

77 35 watering and curing, rounding of corners, providing grooves where ever SQM 45.30 258.25 0.00 11698.65

necessary with cost, conveyance, royalties of all materials with cost of

all labour, T&P, and scaffolding required for the work etc. complete in all

respect as directed by the Engineer in charge.

Providing 2.5cm thick Grading Concrete (1:2:2) using 6mm size hard

black granite crusher broken chips. including mixing, hoisting lowering

78 36 and laying concrete with watering curing with cost, conveyance royalities SQM 45.30 551.22 0.00 24970.42

and taxes of all materials etc. complete with 1% water proofing

compound as per the direction of Engineer -in-charge.

Providing and installing two component acrylic modified cementitious

waterproofing coating by the methodology like Treating the Construction

Joints & cracks, Bore Packing, Coving, Surface Preparation, Prime the

surface with approved make, its tensile strength shall exceed 2.5N/mm2

79 37 and the water vapour transmissions shall be less than 1g/m2/24

hour.Recovery from 400% elongation (%) (ASTM D412-90): 95, Tear

resistance (kN/m) (ASTM D624-00): 15, Water vapour transmission:

2.3mm film (g/m2/hr):0.6Initial hardness (Shore A) (ASTM 2240-86):

60, Water permeability (DIN 1048)

Fixing granite tiles of approved dimension area above 0.4 sqm (20mm

thick) in floor, treads of steps and landing on 20mm thick bed of cement

mortar (1:4) jointed with neat cement slurry mixed with pigment to

match the shades of the tiles including rubbing and polishing etc.

complete with cost, conveyance, royalties of all materials complete in all

respects as per direction of Engineer -in-Charge

Fixing granite tiles of approved dimension area above 0.4 sqm (20mm

thick) in Dados, treads of steps and landing on 12mm thick cement

mortar (1:3) jointed with neat cement slurry mixed with pigment to

match the shades of the tiles including rubbing and polishing etc.

complete with cost, conveyance, royalties and taxes of all materials

complete in all respects as per direction of Engineer -in-Charge.

Supplying, fitting & fixing of Industrial vitrified tiles (30x30)cm in floors

of approved make laid on 20 mm thick cement mortar (1:4) (1 cement :

85 40 4 course sand) and filling joints with slurry including cost of all

materials, labour T&P etc required for the work all complete as per

direction of the Engineer -in-charge.

87 41 Supplying, fitting & fixing of Antiskid Toilet tile in floor

89 42 Supplying, fitting & fixing of Glazed Wall tile in dados

Supplying, Fitting & Fixing of Factory made, Merino make 32mm thick

LS.I, marked post laminated flush doors with I mm thick Merino lam

laminate preseed on both sides of flush door. With fitting and fixing of

Al-drop, hydraulic door clousure, SS Tower bolt with/without vision

panel, SS Door stopper,SS T and P, Required for the work to be

complete in all respectas per the direction of the Engineer -in-charge.

Digitally signed by JAYA

Providing & Fixing I 00% Solid WPC ( Wood Polymer Composite) - Door

Frame 65mm x 50 mm ( Moulded ) Single Rebated, made from Wood

Polymer Composite ( Single Extruded Process) material comprising of

virgin PVC polymer of K Value 57-60 ( Suspension Grade), Calcium

Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk)

and Non toxic additives fabricated with meter Joints after applying PVC

solvent Cement & screwed with full body treaded star headed screws

having minimum frame density of 780 kg/ cbm & manufactured an ISO

9001 - 2015 Certified Company, having good screw holding capacity (

Screw Withdrawal strength of ( Min.990 N ), Minimum Compressive

Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance

to spread of flame of class A category with property of being termite /

borer proof, water / Moisture Proof & Fire retardant & Fixed in position

with SS Dash Fasteners / Hold Fast of required dia and lenght, all as per

specifications drawings as directed by the Engineer -In-Charge, Material

test certificate and authentication should be compulsory provided by the

manufacturing company (Hold Fast or Dash Fasteners shall be paid

separately) - For WC/Bathroom/ Toilet etc.

Casement Door-62-Series duly manufactured using UPVC reinforced

profiles of 62mm x 55mm x 2.5mm for outer frames 102mm x 60mm x

2.5mm casement Door Sash profile and 74mm x 60mm x 2.5mm

mullion peofile capable of mounting single glazing system, structurally

reinforced with hot dip galvanised up to 50 microns of minimum

96 45 thickness of 2.0 mm prefabricated & welded through fusion welding the SQM 2.52 10337.73 0.00 26051.09

door sash shall be fitted with 12mm thick WPC Board of Greenply make

duly fixed with TPEweathering seal resistant accessories like clipping

locking system made of aluminium 1 No. per set of sashes and th

esystem isto be installed at the site using anchor fasteners, silicon

rubber sealant,easy glazing/deglazing at site etc. incl

97 46 UPVC Ventilator

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC)

(FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly

manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm

for outer frames, 75mm for outer frames. 75mm x 60mm x 2.5mm for

casement window sash profile capable of mounting single glazing

system, structurally reinforced with hhot dip galvanised up to 50

microns of minimum thickness of 1.5 mm prefabricated & welded

through fusion welding the window sash shall be fitted with EPDM

weathering seal resistant accessories like clipping locking system made

of aluminium 1 No. per set of sashes and th esystem isto be installed at

the site using anchor fasteners, silicon rubber sealant,easy

glazing/deglazing at site etc. including cost and conveyance of all

material, accessories, labour charges, materials and product conforming

to ASTM D 638-14,EN -447-95 and other applicable codes and

standards.(Ref. -Office of the Engineer -In-Chife (CIVIL), Odisha Nirman

Soudha,Bhubaneswar. Lt. No-16100)

101 47 External Painting (Putty+Weather Seal Coat)

102 Ground Floor

103 Area same as 16mm plastering SQM 81.90 263.12 0.00 21549.68

105 48 Internal painting (Putty+Plastic Emulsion Paint)

106 Ground Floor

107 Area same as ( 12mm +6mm ) plastering SQM 154.43 274.15 0.00 42336.93

Making plinth protection 50mm thick cement concrete 1:2:4 over 75mm

bed of dry brick ballast 40mm nominal size well rammed and

consolidated and grouted with fine sand including finishing the top

110 SUB TOTAL 4670702.22

112 F. PUBLIC TOILETS

113 A Internal Sanitary & Plumbing System

Supplying all materials, labour, T&P and providing and fixing to wall or

ceiling and floor PVC pipes conforming to C-PVC1785/89 (Sch-80) and

G.I pipe fittings of the following nominal bore with clamps including

making good the wall, ceiling and floor, testing all complete as per P.H.

specification and direction of Engineer -in-charge .

(Astral/Finolex/AKG/Supreme/Truflo/SkipperPipe/Ashirbad)

Supplying all materials, labour, T&P and fitting and fixing PVC SWR soil

waste ventilating pipes and fittings of the following outside diameter

conforming to ISI No. 13592/1992 to walls with nails, bobbins and

wooden plugs or laying in trenches including jointing with supply of

118 2 approved rubber lubricant by non-heat application method/as per

manufacturer ’s specification, testing, earthwork in excavation in all kinds

of soil and refilling of trenches as per specification and direction of the

Engineer in charge.

(Astral/Finolex/AKG/Supreme/Truflo/Skipper Pipe/Ajay/Ashirbad).

120 75mm PVC plain bend Each 10.00 0.00 249.69 2496.88

121 75mm PVC socket plain Each 10.00 0.00 110.33 1103.30

124 110mm PVC socket plain Each 10.00 0.00 217.26 2172.62

129 110mm PVC door cross Tee Each 2.00 0.00 747.98 1495.96

130 110mm dia U-PVC Offset without ear Each 4.00 0.00 552.84 2211.37

Supply,Providing, fixing, testing and commissioning in position UV

stabilised 75 mm dia UPVC Rain water pipe with Fittings (IS: 13592

133 3 Type - B). In case of ceiling hanging, the supply of Pipe Clamps

(Chilly/MS angle) as per engineer in charge.110 mm diameter.

.(Astral/Finolex Industries/ AKG/ Supreme/ Truflo/ Skipper

Supply, Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain

water pipes 110 mm dia.

Digitally signed by JAYA

Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina

Wall Hung Water Closet (European type water closet - EWC) with

integral "P" or "S" type trap to the floor including wodden plug and

chromoum plated screw including jointing the trap with soil pipe in

137 5 CM(1:1) fixing PP Soft Close Seat cover for Wall Hung Water Closet with

crmium plated brass hinges and rubber buffers including polishing etc all

complete as per specification and direction of Engineer -in-charge. (CNS-

WHT-959SPP) Wall Hung European Water Clost "P" or "S" trap.

(Kohler/Jaguar/ Grohe/Roca/Hindware/Toto)

Supplying all materials, labour, T&P and fixing vitreous china water

closet, squatting pan (Indian Type W.C pan / Orissa pattern squatting

pan conforming to IS:2556-part-3-2004) duly embedded in cement

concrete (1:5:10) using 4cm size hard granite metal including fixing a

139 6 pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm

dia HCI ‘ P ’ or ‘ S ’ trap (with/without 50mm dia horn) for water closet

squatting pan including jointing the trap with pan in cement mortar

(1:1), cutting the floor and mending good the damages etc all complete

as per specification and direction of the Engineer in charge.

140 580mm size Orissa pan Each 1.00 0.00 4895.82 4895.82

Supplying all materials, labour, T&P and fitting and fixing 10 litres

capacity Single Piece Slim Concealed Cistern body with Installation Kit &

141 7 "S" Type Drain pipe Connection set for Wall Hung Water closet (without

flush control plate) with 32mm dia flush bend etc all complete as per

specification and direction of the Engineer in charge.

142 10 litres PVC L.L. Cistern Each 3.00 0.00 3047.94 9143.82

Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC &

143 8 Cistern complete with fittings & seat cover, one no hinged rail 76 cm

and five nos of grab rails 60 cm)

144 With all Fittings & Accessories Each 1.00 0.00 78575.49 78575.49

Supplying all materials,labour,T&P and Bowl pattern urinal of the

following sizes including connecting the urinal with 32mm dia PVC waste

pipe 910mm long by means of white lead mixed with chopped hemp,

145 9 fixing 32mm dia cp dome west,15mm dia cp spreader including cutting

holes in wall and making good the damages with supply of wooden

plugs,screws and cement etc. all complete as per specification and

direction of the Engineer -in-charge. (Jaquar/Kohler/Grohe)

146 355x340x535mm Halfstall urinal No.URS-WHT-13261. Each 3.00 0.00 2959.44 8878.32

147 Cost of 15mm dia urinal spreader Each 3.00 0.00 746.35 2239.05

Urinal Valve Auto Closing System with Built-in Control Cock & Wall

Flange PRS 077 3.00

Supplying all materials, labour, T&P and fixing Wash Basins with hole for

pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S

brackets painted white including cutting holes in walls and making good

the damages with supply of wooden plugs, screws and cement etc,

fixing pedestal for wash basin recessed at the back for the reception of

pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for

149 10 wash basin including brass check nut complete, fixing pillar taps capstan

head screw down high pressure lettered ‘ Hot ’ and ‘ Cold ’ with long

screws, shanks and back nuts of 15mm dia nominal bore(Plaza make),

fixing 15mm dia PVC inlet connection pipe and making connection with

pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass

waste(Plaza make), etc all complete as per specification and direction of

the Engineer in charge.

150 Under Counter basin (560x450) (Hindware) Each 4.00 0.00 7155.73 28622.93

Supplying all materials, labour, T&P, fitting and fixing brass/CP fittings of

the following nominal bore with supply of all jointing materials complete

151 11 as per specification and direction of the EIC..

(Kingston/Grohe/Kohler/Jaquar)

152 15mm dia CP 2way bib cock Each 2.00 0.00 3188.95 6377.90

153 15mm dia CP Health faucet Each 2.00 0.00 1730.18 3460.35

154 15mm dia CP Angle stop cock Each 10.00 0.00 1696.25 16962.50

155 15mm dia CP Pillar cock Each 5.00 0.00 2337.57 11687.84

156 15mm dia CP extension piece Each 15.00 0.00 71.38 1070.67

157 PVC Connection Pipe Each 10.00 0.00 106.66 1066.60

158 PVC Discharge Pipe Each 8.00 0.00 106.66 853.28

160 125mm dia CP gratting Each 8.00 0.00 106.66 853.28

Supplying all materials,labour,T&P and fixing standard sized Glass-shelf,

Towel Rail, Towel Ring, Soap Holder, Soap dispenser with C.P brass

161 12 bracket and guard rail complete fixed to wooden pluges with screw

etc.all complete as per specification and direction of Engineer -in-

charge.(Kingston/Grohe/Kohler/Jaquar)

162 600mmx125mm size glass shelf with C.P ruard Rail. Each 4.00 0.00 2304.19 9216.74

163 C P Towel Ring (Kingston/Grohe/Kohler/Jaquar) Each 4.00 0.00 2837.90 11351.60

164 C P Soap Dispenser. (Euronics/Bobric/Sloan/Prestge/Nirali) Each 4.00 0.00 2804.86 11219.44

Supplying all materials, labour, T&P and fixing of Stainless Steel Coat

Hook alongwith all necessary accessories complete including cutting,

165 13 making good the walls, floors, slab wherever complete in all respect as

per specification and direction of the Engineer in

charge.(Kingston/Grohe/ Kohler/Jaquar)

166 Stainless Steel Coat Hook AKP -35761P Each 3.00 0.00 1154.04 3462.12

Supplying all materials ,labour ,T&P and fixing Mirror of superior glass

mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to

wooden plugs with chromium plated brass screws and washers etc.all

complete as per specification and direction of Engineer -in-charge.

168 Mirror (Bevelled edge) 600mmx450mm Each 4.00 0.00 984.12 3936.48

Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass

fittings of the following nominal bore with supply of all jointing materials

complete as per specification and direction of the Engineer in charge.

(Zoloto/Advance/L&T/Sant/Kartar)

170 25mm dia Brass F.W valve Each 5.00 0.00 1626.04 8130.20

171 32mm dia Brass F.W valve Each 5.00 0.00 2515.76 12578.80

Supplying all materials, labour, T&P and providing fitting and fixing

Aquaguard PRO Thermapure 120 PSS RO ACH which gives you Hot,Cold

& Ambient purified water.Aquaguard PEO Thermapure 120 PSS RO has

built-in-3 stage combinations,Tank Capacity 120Ltr.,Cold Water-80

Ltrs,Hot water-20 Ltrs.,Ambient water-2- Ltrs.,Cooling capacity -60

LPH,Refrigerant -HFC R134a,Cold water temperature -15 Deg.C+/ -

172 16 1*,Heating coil wattage -2000W,Hot water temperature -50 Deg C+/- Each 0.00 182223.86 182223.86

1,Thermal insulation -PUF,No of Faucets-1 Hot,1 Cold,1

Ambient,Tank,front panel and drain tray MOC-SS304,Other body panels-

Powder coated CRCA Steel,No of filtration stages-7,RO Capacity -50

LPH*,RORecovery% -50%*,TDS Reject-90%*, Dimentions (WxDxH)cm -

75x72x144,Net weight-92 Kg.etc.all complete as per direction of the 1.00

Engineer-in-charge.

Digitally signed by JAYA

Supplying all materials ,labour ,T&P and constructing gully trap chamber

of inside size 250mmx250mm with 8cm thick RCC precast cover slab in

cement concrete (1:2:4) mix using 12mm size crusher broken HG chips,

foundation concrete (1:4:8) using 40mm size crusher broken HG metal

173 17 on bed and around trap, KB brick work in cement mortar (1:6) in

foundation and plinth and inside 12mm thick cement plastering (1:3)

finished with a floating coat of neat cement including fixing

100mmx100mm size HCI gully trap, 150mmX150mm size CI grating

etc.all complete as per drawing, specification and direction of Engineer -

Supplying all materials ,labour ,T&P and constructing Inspection

Chamber of inside size 760mmx760mmx460mm with cement concrete

(1:3:6) using 40mm size crusher broken hard black granite metal on

bed , KB brick work in cement mortar (1:6) in foundation and plinth,

moulding and shaping the channel inside and benching with cement

concrete (1:2:4) using 12mm size crusher broken hard black granite

chips, 12mm thick cement plaster (1:3) with cement punning to inside,

cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using

12mm size crusher broken hard black granite chips with R.C.C man hole

cover, earth work in excavation in all kinds of soil and refilling the cavity

around the chamber including watering,curing,cost of all materials,

conveyance of all materials to worksite, payment of royalty,all taxes

etc.all complete as per approved drawing, P.H specification and

direction of Engineer -in-charge .

177 Fitting and fixing RCPC cover slab (0.45m dia) Each 2.00 0.00 1483.26 2966.52

179 G. EXTERNAL PH

180 A. External Services

Supplying all materials, labour, T&P and constructing Circular Type Man

Hole Chamber of the following size with cement concrete (1:4:8) using

40mm size hard granite metal on bed, 1st class Fly ash brickwork in

cement mortar (1:5), moulding and shaping the channel inside and

benching with cement concrete (1:2:4) using 12mm size h.g chips,

181 50 12mmthick cement plaster (1:3) with punning to inside, 12mm thick

cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm

size h.g chips, earthwork in excavation in all kinds of soil and refilling

the cavity around the chamber including watering, curing, conveyance of

all materials to worksite, payment of royalty,taxes etc all complete as

per approved specification and direction of the Engineer in charge.

182 Circular MH inside dia 1200mmx1670mm with sides sloped upto560mm Each 6.00 0.00 17315.44 103892.63

183 Cost of RCPC Cover Each 6.00 0.00 1289.86 7739.15

Providing and fixing in position Polyproplene Foot steps of required

shape and approved quality as per the direction of E.I.C.

Providing Lowering, Laying, Jointing and Testing Work of non-pressure

NP 3 class R.C.C. pipes with collars jointed with stiff mixture of cement

mortar in the proportion of 1:2 (1 cement : 2 fine sand) including

testing of joints:

188 B. Construction of 6.75mx3.60m x 1.40m(h) Rain water harvesting system

200mm dia- 0.0m to 30.00m

190 54 Lowering of PVC casing pipe inside bore.

193 57 Cutting slot in casing pipe for recharge of rain water Mtr. 25.00 492.21 0.00 12305.34

194 58 Labour for packing gravel outside the tube well

196 59 Cost of washed gravel. Cum 2.35 2245.11 0.00 5276.00

Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial

197 lift including rough dressing and breaking clods to maximum 5cm to

7cm and laying in layers not exceeding 0.3 mtr in depth and as per

direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete

(1:4:8) with 4cm size hard granite metal including watering, curing,

conveyance of all materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing brick work with K.B

bricks having crushing strength not less than 75kg/cm² with dimensional

199 62 tolerance ± 8 percent in cement mortar (1:6) including watering, curing, Cum 11.40 5826.22 0.00 66418.90

conveyance of all materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing 12mm thick cement

plaster (1:4) on brickwork including watering, curing, conveyance of all

materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement punning

including watering, curing, conveyance of all materials to worksite,

payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth

centering and shuttering for R.C.C works including false work and

202 65 dismantling them after casting including conveyance of all materials to Sqm 3.13 565.73 0.00 1770.74

worksite, payment of royalty, taxes etc all complete as per specification

and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing reinforced cement

concrete work of M-25 grade with 20mm and down grade black hard

203 66 granite crusher broken stone chips including hoisting, laying, watering, Cum 0.42 6921.34 0.00 2906.96

curing, conveyance of all materials to worksite, payment of royalty,

taxes etc all complete as per specification and direction of the Engineer

Supplying all materials, labour, T&P and providing M.S reinforcement for

R.C.C work including cutting, bending, binding, and tying the grills and

204 67 placing in position including cost of binding wire 18 to 20 gauge, Qntl. 0.34 7377.07 0.00 2508.21

conveyance of all materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in charge

205 68 Providing and filling filter media

209 69 Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi Qntl. 3.00 10999.96 0.00 32999.88

210 SUB TOTAL 301029.44

211 C. R.C.C. DRAIN

212 70 Earthwork Excavation

Digitally signed by JAYA

Earth work in all kinds of soil within 50m lead and 1.5m lift including

213 rough dressing and breaking clods to maximum 5cm. To 7cm. And

laying in layers not exceeding 0.3m in depth and as per specification

complete. Cum 967.57 375.53 0.00

214 71 Sand Filling

Filling in foundation, trenches and plinth with available earth, well

watered and compacted in layers of 0.3 mtr, with top surface dressed

215 and leveled to proper gradient including cost of all materials, 40370.69

conveyance, all taxes and royalties, loading and unloading, including

cost of all labour, sundries , T & P etc. All complete as per directions of

the Engineer -in-charge. Cum 193.51 208.62 0.00

Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4

sand : 8 graded stone aggregate 40 mm nominal size)of approved

quality from quarry mixing in concrete mixer, lowering and compacting

217 in proper thickness, watering & curing for the required period. including 464371.45

all cost of labour, material, conveyance, royalties and taxes, sundries, T

& P etc. but excluding the cost of centering and shuttering all complete

as per the directions of Engineer -in-charge. Cum 56.45 8226.24 0.00

R.C.C. work M-30 grade with 20mm and down grade black hard granite

crusher broken stone chips including hoisting and laying.

220 Foundation and plinth

224 74 Reinforcement

Providing M.S. reinforcement for R.C.C. work including cutting, bending,

225 binding and tying the grills and placing in position including cost of 1955355.49

binding wire 18 to 20 gauge. qtl 154.31 12671.61 0.00

226 SUB TOTAL 5755315.63

227 D. Construction 2 nos of Soakway Pit

Supplying all materials, labour, T&P and constructing soakway pit of the

following size with dry brick walling from bottom upto invert of inlet pipe

and fly ash brickwork in cement mortar (1:6) for the remaining height at

top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm

thick cement plaster (1:4) inside and outside over masonry brickwork,

gravel backing in the rear of well steining, RCC cover slab in cement

concrete (1:2:4) using 12mm size hg chips fitted with iron lifting

handles including earthwork in open well excavation in all kinds of soil

and refilling of cavity around the pit & painting the iron works, watering,

curing, conveyance of all materials to worksite, payment of royalty,

taxes etc all complete as per approved specification and direction of the

Engineer in charge 1.40m dia x 2.00m deep soakway pit .

229 SUB TOTAL 71412.30

230 ELECTRICAL WORKS

231 H. External Electrification Works

232 A. External Lighting Fixture

233 76 Post top Lights

Supply of LED Post Top with a system lumen output of 4000 lumens and

a minimum system efficacy of >90 lm/W. The luminaire shall have a

rated system lifetime of 25,000 burning hours at L70. The luminaire

should have a color temperature of 4000K and CRI > 70. The luminaire

234 shall meet IP65 with THD < 20% and PF > 0.9. The luminaire shall have

closed diffused optics with polycarbonate diffuser board. The fixture is

similar to Wipro LP09S-501-XX-57-XX . This is including cost of all

material, conveyance, royalities as directed by Engg-in-charge all

Installation of LED post tops includes preparing designing & erecting a

foundation in the ground with anchor bolts to suit the fixing of base

235 plate, fixing of post top on foundation using anchor bolts & the base

plate. The contractor shall ensure all post tops installed are in line

plumb. (Wipro, Phillips, Havells)

236 Pole height: 2.5 to 3 m above ground level.

Body of the pole: Hot dip GI with matt finish & 70% grey/ black color or

as specified by EIC.

238 Junction Box: Inbuilt with MCB, connector etc.,

239 Desired output lux level:15(+/ -3)

240 Protection: IP65 class I

241 Voltage range : 210-270

242 Colour temprature : 5700K (neutral) Nos 25.00 0.00 26039.06 650976.50

243 77 Single Arm Street Lights:

Supply, erection, testing & commissioning of road lighting HDG

Octagonal Pole conforming to IS 875 and BS EN ISO 1461 & 410 SP 33

of 6.0 meter with base plate drilling of 1" dia hole on the upper portion

of the pole for the installtion of street light and 1" dia hole on the lower

portion of the pole for entry of the wire Base pole paintng of red oxide

and two coats of black enamel paint. The poles shall have extra provided

and fixed with 4'x2' dia being erected by laying 5'x2'x2' (length, breadth

and width) cement concrete block in the ratio 1:3:6 and block be

continued up to 1 feet above the ground level i.e 4 feet below ground

level including surface plastering the job including excavation of pole

with 4 feet deep and refilling the same after installation of the pole and

with holes at top of the pole for fixing ring type single armed GI braket

244 for the installation of the integral flood light luminaire of 90 watt Similar

to Wipro LR02-102-XXX-57-G2. The Dust and wheather proof gasket

using for 250mmx 200mmx 150mm deep box nominal size of 16 SWG

thick MS sheet cable looping box with the existing pole with MS clamp

made out of 25mmx3mm thick flat iron with suitable nuts and bolts

complete with hinged cover and locking screws earth studs neoprene

gasket suitable for Nos 4 pole mounted including supply and fixing one

no 6 Amp MCB carrier with base and 4 way 60 Amp terminal block

suitable to receive PVC armoured cable fixed on suitable size Baketillte

sheet base complete connection through GI pipe (classB) 40 mm dia

Nominal 1.5 mtr length along the pole or protection of underground

cable (on vertical run) with painting all complete as the direction of

EIC.(Wipro, Phillips, Havells) Nos 20.00 0.00 38940.00 778800.00

245 78 Single Armed All in One integrated Solar LED Street Lighting

Digitally signed by JAYA

Supply, installation, testing & commissioning of Single Armed Hybrid All

in One integrated Solar LED Street Lighting along Row of Street light (30

watt Fixtures with 6.0 meter octagonal GI Pole with base plate drilling of

1" dia hole on the upper portion of the pole for the installtion of street

light and 1" dia hole on the lower portion of the pole for entry of the

wire Base pole paintng of red oxide and two coats of black enamel paint.

The poles shall have extra provided and fixed with 4'x2' dia being

246 erected by laying 3'x2'x2' (length, breadth and width) cement concrete

block in the ratio 1:3:6 and block be continued up to 1 feet above the

ground level i.e 4 feet below ground level including surface plastering

the job including excavation of pole with 4 feet deep and refilling the

same after installation of the pole and with holes at top of the pole for

fixing ring type single armed GI braket for the installation of the integral

flood light luminaire of 30 watt Similar to Wipro Cat no: LR19-561-XXX-

57-XX All-in-One With Hybrid.(Wipro, Phillips, Havells)

247 79 Step Light

Supply, installation, testing & commissioning of step light for WALL as

248 7W , 3000 K required as per direction of Engg.-in-Charge Similar to

249 80 Spike / focus Lights

Supply, Installation,Testing & commissioning of IP-65, LED Garden Spike

Light including 1 no. of 8 watt LED luminairs & Basewith BrickMasonry

250 work (200x200x200)mm for the above fitting as per EIC of approved

make including with all materials & labour Similar to Wipro CAT No.

251 81 Gate Lighting

Supply, installation, testing & commissioning of 45W Gate Lighting with

252 other necessary arrangements like Pedestal, loose wire box &

connectors etc similar to Wipro CAT No:LP07 -501-XXX-57-CL. Nos. 4.00 0.00 14502.20 58008.80

253 82 Bollards

Supply, installation, testing & commissioning of 11W STATIC COLUMN

254 Bollards Light with other necessary arrangements like Pedestal &

connector etc Similar to : Wipro CAT No. LB14-131-XXX-65-05.

255 83 Aviation Lighting

LED Aviation light luminaries including required driver/ control box,

protections, above the highest point of terrace level and making good

256 the same. It should switch ON automatically as required in night time &

OFF in day time including FRLS copper control wiring etc. complete in all

respect as required & as approved by the Engineer Incharge Similar to

257 B. Panels, MDBs, DBs. MCBs

Supply, installation, testing and commissioning of cubicle type

sectionalised, front operated top entry dust and vermin proof M.V.Panel

Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution

system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar

with heat shrienkable PVC sleeve, base channel, wiring with space

heater, thermostat and control MCBs shall be provided for all vertical

sections of main LT Panel, all hinged door shall be earthed through 2.5

258 sq mm tinned braided, the incoming and outgoing feeders shall be

accommodated in a modular arrangement, detachable gland plates,

adequate size cable alley, Sign writing, Painting, Earthing, Numbering,

Danger plate, including PVC insulated copper FRLS wires of minimum

1.5 sq.mm & 2.5 sq.mm for CT's etc. with all accessories including

interconnections, earth bus, Surge protection Device(SPD) etc. as

required.(All the incomers of the panel must be mounting with RS 485

communication port for BMS Compartibility as per client demand.)

259 84 External Feeder Pillar for External Lighting

Design, Supplying, Installation, testing and commissioning of 415 V

feeder pillar panel compartmentalised, factory made Godrej Almira type

suitable for outdoor installation, made up of CRCA sheet steel of

thickness not less than 2 mm with a weather proof canopy of top,

double door construction, IP 54 protection, anti corrosive chemical

resistant paint with, automatic dawn and dusk with astronomical

260 controller for street light outgoing, , complete with Aluminium bus bars,

inter-connection with solid/ stranded copper conductor wires/ copper

strips, glands neutral links, etc., and mounted with following switch

gears, etc., complete as required with detailed specifications: , energy

saver for automatic switching ON/OFF as per pre-sets time cycle, digital

multifunctional meter and suitable CT etc., including concrete pedestal

and associated civil works.

Busbar-100 Amp Al busbar with neutral bus SC rating of 25 KA suitable

for operation at 415 Volt, 50 Hz, 3 Phase supply

262 One (1) - 63A,TPN, 25KA, MCCB Incomer

263 One(1) set of – 63/5A , 15VA , CL 1.0, CT

264 One Set ON/OFF Indicating lamp with control fuse/ MCB.

265 one set of Contactor & Digital Timer with incomer side.

266 4 Nos - 32 Amp TP MCB Outgoing

267 8 Nos - 16 Amp TP MCB Outgoing

2 No.s - 16 Amp DP MCB with 6/16 Amp socket outlet with 10 Amp

modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.

270 C. Cables, Cable Laying & End Termination

Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of

following size suitable for 415 Volt, 3Ph, 50 c/s supply.

276 CABLE LAYING

Laying of one number PVC insulated and PVC sheathed/ XLPE power

cable of 1.1KV grade of following size direct in ground including

excavation (75 cm), sand cushioning, protective covering and refilling

the trench etc as required.

Laying of PVC Insulated PVC Seated/ XLPE power cable of 1.1 kv grade

size not exceeding 25 SQ. MM direct in ground in the trench in one

278 a) horizental formation including excavation ,sand coushing protection

covering and refilling the trench etc as required as per direction of

Laying of One No. PVC insulated and PVC sheathed/ XLPE power cable of

1.1 KV grade of following size in the existing RCC/ HUME/ MASONERY

TRENCH/ HDPE Pipe/ DWC Pipe/ Metal Pipe/ On Wall Surface (Clamped

with saddle/ PVC & UPVC Pipe)/ Cable Tray etc. as required.

Laying of one number of PVC insulated and PVC sheathed / XLPE power

280 a) cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground in

the existing RCC/ HUME/ STONEWARE/ METAL pipe as required.

281 TERMINATION OF CABLES

Digitally signed by JAYA

Supply & Making end Termination with brass compression gland and

282 88 Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv

grade (without cost of Cable)

Providing, fixing and laying of following dia HDPE/ DWC pipe (medium

class) in ground complete with fitting including trenching (75 cm depth

minimum) and refilling as per direction of Engg.-in-Charge. Ncessary

test report & Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free after sales service within warranty

period for acceptance of materials.

290 D. Earthing

S/IT/C of materials and installation of GI earth plate 600mm x 600mm x

6mm thick ISI marked with G. I. nut bolts & washers including cost of

burnt wood charcoal, salt, foreign soil, water pouring arrangements,

291 90 brick masonary enclosure on top with removable RCC cover complete

with labour for excavation of pit in all kinds of soil & rock as required

and as per direction of Engineer -in-charge.The entire earthing system

should be Replacement Warranty will be 2 years Set 2.00 0.00 7670.00 15340.00

Providing and fixing 25mm x 5 mm GI strip on surface or in recess for

connections etc. as required as per direction of Engg.-in-Charge.

293 92 Supply, Escavation and Fixing of Coil earthing to the Lighting Pole. Nos 148.00 0.00 354.00 52392.00

294 93 Supplying & fixing Route Markers for LT UG Cable lines. No 60.00 0.00 283.20 16992.00

296 I. HVAC WORK

Supply installation testing & commissioning of Full Inverter VRF System

with Modular type outdoor units (Top Discharge) , all scroll/twin rotary

DC Inverter compressors for Cooling applications along with different

types of indoors compitable with VRF ODUs with R 410 A . All inverter

capacity controlling compressors shall be suitable for 3 Phase, 50 Hz..

The outdoor fins should be with corrosion resistant chemical coating at

factory only alongwith hydrophilic coating to shield it from Salt, Sand &

other elements brought in by the air. compressor, which is fitted in the

VRF outdoor unit. It can work upto 54 Degree Celsius. All proposed

outdoor unit should have minimum COP at 100% load & minimum at

50% load condition for Cooling in standard AHRI test conditions

(Ambient DBT-35 Deg C, Inside DBT 27 Def C/WBT 19 Deg C). Proposed

outddor unit system should not have any deration in cooling capacity

upto 39 Degree C ambient temepetrure.

308 j. Indoor Unit

Supply installation testing& commissioningof The Indoor units suitable

309 for operation on 220V-240V, Single Phase, 50 Hz AC electric supply and

shall have shall have electronic control valves to control refrigerant flow

with washable Filters,BLDC motors.

313 d. 1.0 TR - Compact Cassatte AC Nos 4.00 0.00 53572.00 214288.00

314 e. 1.25 TR - Compact Cassatte AC Nos 2.00 0.00 56758.00 113516.00

315 f. 1.5 TR - Compact Cassatte AC Nos 7.00 0.00 57584.00 403088.00

320 3 Wired remote for Ducted Nos 32.00 0.00 6372.00 203904.00

Supply and erection of Refrigerant Copper pipes to integrate outdoor /

indoor units. The rate shall inclusive with Nitrile rubber insulation class O

(tubular form) covering with Fiberglass tape shall be helically wound &

coated with painted two coats of resin with hardener to give smooth &

plain finish for UV protection and damageagainst mechanical impact. The

pipe sizes and insulation thickness as follows.

323 A. Gas line with 19mm thick insulation

332 B. Liquid line with 13mm thick insulation

Supply & Installation Testing and Commission of Control wiring of 2 core

338 6 x 1.5 sqmm copper Shielded Cable through suitable conduits in between 354.00

indoor and outdoor units. Mtr 2700.00 0.00 955800.00

Supply, Installation, Testing and Commissioning of hard UPVC drain pipe

339 7 with 9mm thick nytrile tube insulation.(With necessary Lbow, Sockets &

Supply & Installation of Galvanised Stainless Steel Slotted Tray for

344 8 Exposed copper piping for the safety of nytrile insulations over copper

pipe and covered with GI tray.

Supply and Commissioning of VRF systems including additional

347 9 referigernt R410A in all respect to complete the system as per site 1699.20

requirements. Kgs 396.00 0.00 672883.20

Digitally signed by JAYA

Supply, Fabrication, and installation of Pre-Insulated ducting

system.'Green' PIR (Poly-Iso-cyanurate) Panels coated with a Lacquer

based 80 microns Embossed Aluminium foil on both sides having Density

not less than 45 kg/m3 ± 3 and thermal Conductivity not more than

0.019 W/(mK). Panels must be closed cell exceeding 95%, CFC, HCFC,

HFC free and Certified with Class 'I', Class 'O', Class 'A', Class 'P' & UL

94 fire ratings. The toxicity Index should be below 5.5 & Oxygen index

not be more than 26%. Anti-fungal treated for protection against mold

and Anti-Bacterial, Water absorption shall be not more than 0.03% as

standard. The ductwork should be capable of handling pressures up to

1500 Pascal's.The Duct fabrication, Installation & and testing has to be

done by the manufacturer only for faulty less systemThe joint between

the ducts shall be done using a Polymer “flange / slide-in channel”

system to prevent air leakages. Turning vanes, elbows, and reducers are

to be considered as part of the supply of ducts.Ducts shall be supported

by cable supports / GI slotted channels with threaded rods. Internal

Stifferens shall be used to prevent the bulging of ducts for sizes above

20 mm thick with 80/80 Microns Embossed Aluminium Foil for Internal

Application Sqm 1900.00 0.00 3783375.00

Fire retardant Canvass connection between the unit and the ducting with

350 11 all accessories, gaskets and fixing - sizes shall be as per units discharge 3540.00

openings of equipment. Nos 34.00 0.00 120360.00

Supply, installation, testing, balancing and fixing of Powder coated

aluminium extruded grill with aluminium construction collar damper for

supply air as per specification & the sizes will be as per schedules and

drawing.Refer technical specification for detail description. Sqm 36.00 0.00 509760.00

Supply, installation, testing and balancing of square shape/ round ceiling

352 13 diffusers with removable core & anti smudge ring & volume control 17700.00

Fabrication of supports with MS Angle, C-channels, I-section, Additional

353 14 supports etc. with two coats of the red oxide paint and two coats of 206.50

finished colour as per site instruction. Kgs 960.00 0.00 198240.00

Supply, installation, testing and commissioning of motorized damper.

The damper shall be made out of 16G thick galvanized sheet steel frame

and blades of 18G galvanized steel with air tight arrangement. The

354 15 damper shall be provided with BMS compatible fire proof actuator and

the actuator shall have required torque to ON / OFF the actuator with

220 V / 24 V transformer duly encased and wired, input signal from the

DDC/MCC, communication cables, etc.

357 16 SITC of Jet Nozzles of dia 300-400 mm. Nos 10.00 0.00 10030.00 100300.00

Supply,installation,commissioning and testing of weather protected

type floorIwall mounted cabinat type toilet exhaust fan complete

with TEFC sq.cage induction motor, mounting frame etc. as per

specification including wiring between starter and motor of

following minimum capacity. 1200 CFM against min. 60mm WG SP for

toilet exhaust system as per instruction of Engineer -in-charge. nos 4.00 0.00 254880.00

2.5 sq mm PVC Copper , three core multistranded 1100v grade cable for

indoor power supply carrying through pvc piping as require.

6 sq mm Copper ,armoured PVC insulated four core multistranded

1100v grade cable. From PANEL to Outdoor carrying through cable tray.

10 sq mm Copper ,armoured PVC insulated four core multistranded

1100v grade cable. From PANEL to Outdoor carrying through cable tray.

363 20 Supply and fixing of 6/16Amp 3pin plug. Nos 60.00 0.00 70.80 4248.00

365 J. ELV WORK

366 1 L3 core Switch

Should have 16 number of 10G SFP+ ports and 32 number of 1G SFP

Should have 2 number of 100G QSFP28 ports which can be used for

stacking or uplink.

The switch should be loaded with 4 GB RAM and 16 GB Flash/SSD

370 Should have at least 912 Gbps switching fabric.

371 Packet forwarding rates 678 million PPS

372 Should support at least 96 K entries in the MAC table.

373 Should support at least 16K ARP entries.

374 Should Support minimum 4000 active VLANs.

375 Should support Ethernet VPN–Virtual Extensible LAN (EVPN-VXLAN)

Should support IEEE Standards -based microsegmentation using group-

Should have internal, hot-swappable, redundant and field replaceable AC

Power Supply 100 to 240 V AC equipped with 3 pin plug.

Should support Dual Images and should be having modular operating

378 system for enterprise grade performance. This fature will improve

system uptime by preventing entire system down due to solated failures

of system software.

379 Should support port mirroring and jumbo frame.

380 Should support following for min. 64 Groups :

381 i) IGMP Snooping,

382 ii) IGMP v1/v2/v3 awareness Snooping,

383 iii) IGMP Snooping Queried.

Should support RSTP, Spanning -tree root guard, Port Fast, Loopback

Detection and BPDU Guard/Filter or similar functionalities.

Switch should have IP SLA monitoring (or equivalent functionality) for

385 Latency, Packet drop, Jitter etc. and should also support SNMP polling

for IP SLA monitoring.

Switch should have advance routing features like RIPng, OSPF, OSPFv3

Switch should support advance features like IS-IS, BGP, EVPN-VXLAN

using software / license upgrade, if required in future.

388 Should support following security features viz.:

389 i) Web Management (HTTPS),

390 ii) Broadcast/Multicast/Unicast Storm Control,

391 iii) Support for MACsec AES256

392 iv) Control plane DoS Attack Prevention

393 Switch should support following SNMP traps or Syslog:

394 i) Interface UP & Down

395 ii) Optical power SFP threshold alarms

396 iii) STP Topology Changes and New root bridge

397 iv) LLDP table changes

398 v) Threshold alarms for Temperature.

Switch should comply to following Temperature performance

Digitally signed by JAYA

400 i) Operating Temperature: min 0° to 45°C (32° to 113 °F)

401 ii) Storage Temperature: min -40° to 70 °C (-40° to 158 °F)

It shall support MAC address notification to allow administrators to be

notified of users added to or removed from the network.

403 The switch shall be designed for continuous operations.

It should support IPv6/v4-L3 and IPv6-Multicast functionalities /

405 Safety Requirement: -

406 Switch should have safety compliance of UL 60950-1

408 Electromagnetic Compatibility (EMC) Requirements: -

Switch should have EMC compliance of FCC 47 CFR Part 15, EN 55032,

The LAN switch shall support a console port or auxiliary/Ethernet port

for the purpose of local and remote configuration and diagnostics.

411 IPv6 feature should be ready from day 1 and IPv6 Ready Logo approved

412 Qualitative Requirements: -

The equipment shall be manufactured in accordance with the

international standards ISO 9000:2008 or later for which the

413 manufacturer shall be duly accredited. A quality plan describing the

quality assurance system followed by the manufacturer shall be required

to be submitted

The switch should be enterprise class and designed for continuous

414 operations. It should be having MTBF (Mean Time Between Failure) and

MTTR (Mean Time To Repair) values predicted and observed by the

The switch should support standards -based microsegmentation using

group-based policies (GBP)

The switch should be supplied with 5 year warranty including but not

416 limited to advanced faulty part replacement, OS bug fixing, all major Nos 1.00 0.00 523920.00 523920.00

and minor software update and upgrade during the warranty period.

417 2 L3 PoE Access Switch

The switch should have 24 x 10/100/1000BASE -T and 4 x 10G SFP+

419 The switch should have 2 GB RAM and 2 GB Flash

Should have internal AC Power Supply 100 to 240 V AC with 50 to 60 Hz

and equipped with 3 pin plug.

Switch should have minimum switching bandwidth of 128 Gbps and

forwarding rate of 95 Mpps for line rate performance.

422 Switch should support minimum 16000 MAC addresses per system

423 Switch should support Jumbo frames – 9,000 bytes

Switch Should support minimum 2000 Active VLANs and 802.1Q VLAN

425 Switch Should support Voice VLAN, LLDP and LLDP-MED

426 Switch should support IPv4 and IPv6 static routing

Switch should support VRRP, IGMP V1/V2/V3, OSPFV2/V3, RIPng and

427 Bidirectional Forwarding Detection (BFD) by adding a feature license if,

required in future.

428 Switch should support Class-based queuing with prioritization

429 Switch should support Queuing based on VLAN, interface and port

430 Switch should support WRED, Marking, policing, and shaping

Switch should have modular operating system for enterprise grade

432 Switch should support SNMPv2 and SNMPv3

Switch should support IPv6 Management including Neighbor discovery,

Logging, Telnet, SSH, Web, SNMP, NTP and DNS

The switch should have IEEE 802.1ag (connectivity fault management)

standard support

Switch Should support Port, VLAN and Router based Access control lists

436 Should support minimum 1K Security Access Control Entries

437 Switch should support MAC limiting

438 Switch should support Dynamic ARP Inspection (DAI)

439 Switch should support DHCP snooping

440 Switch should support L2-L4 ACL

441 Switch should support Control plane DoS protection

Switch should be managable through CLI, Web Interface, SSHv2 and

443 Configuration backup via FTP/secure copy

The switch should be compliant with IEEE 802.3af (PoE) and 802.3at

(PoE+) standard and minimum PoE power budget should be 370 watt

444 which can be used to deliver 802.3af Class 3 PoE power (up to 15.4

watt) and 802.3at (up to 30 watt) standard -based PoE+ power to any of

the copper ports.

Should be ROHS-6 compliant, NDPP/NDcPP certified and having IPv6

Ready Logo conformance.

Should have FCC 47CFR Part 15 Class A, EN 55022 Class A, ICES-003

Class A, CISPR 22 Class A certifications / compliance.

The switch should be supplied with 5 year warranty including but not

447 limited to advanced faulty part replacement, OS bug fixing, all major Nos 16.00 0.00 229392.00 3670272.00

and minor software update and upgrade during the warranty period.

448 3 L3 PoE Access Switch

The switch should have 8 x 10/100/1000BASE -T and 4 x 10G SFP+

450 The switch should have 2 GB RAM and 2 GB Flash

Should have internal AC Power Supply 100 to 240 V AC with 50 to 60 Hz

and equipped with 3 pin plug.

Switch should have minimum switching bandwidth of 128 Gbps and

forwarding rate of 95 Mpps for line rate performance.

453 Switch should support minimum 16000 MAC addresses per system

454 Switch should support Jumbo frames – 9,000 bytes

Switch Should support minimum 2000 Active VLANs and 802.1Q VLAN

456 Switch Should support Voice VLAN, LLDP and LLDP-MED

457 Switch should support IPv4 and IPv6 static routing

Switch should support VRRP, IGMP V1/V2/V3, OSPFV2/V3, RIPng and

458 Bidirectional Forwarding Detection (BFD) by adding a feature license if,

required in future.

459 Switch should support Class-based queuing with prioritization

460 Switch should support Queuing based on VLAN, interface and port

461 Switch should support WRED, Marking, policing, and shaping

Switch should have modular operating system for enterprise grade

463 Switch should support SNMPv2 and SNMPv3

Switch should support IPv6 Management including Neighbor discovery,

Logging, Telnet, SSH, Web, SNMP, NTP and DNS

The switch should have IEEE 802.1ag (connectivity fault management)

standard support

Switch Should support Port, VLAN and Router based Access control lists

Digitally signed by JAYA

467 Should support minimum 1K Security Access Control Entries

468 Switch should support MAC limiting

469 Switch should support Dynamic ARP Inspection (DAI)

470 Switch should support DHCP snooping

471 Switch should support L2-L4 ACL

472 Switch should support Control plane DoS protection

Switch should be managable through CLI, Web Interface, SSHv2 and

474 Configuration backup via FTP/secure copy

The switch should be compliant with IEEE 802.3af (PoE) and 802.3at

(PoE+) standard and minimum PoE power budget should be 190 watt

475 which can be used to deliver 802.3af Class 3 PoE power (up to 15.4

watt) and 802.3at (up to 30 watt) standard -based PoE+ power to any of

the copper ports.

Should be ROHS-6 compliant, NDPP/NDcPP certified and having IPv6

Ready Logo conformance.

Should have FCC 47CFR Part 15 Class A, EN 55022 Class A, ICES-003

Class A, CISPR 22 Class A certifications / compliance.

The switch should be supplied with 5 year warranty including but not

478 limited to advanced faulty part replacement, OS bug fixing, all major NOS 1.00 0.00 110920.00 110920.00

and minor software update and upgrade during the warranty period.

479 4 Indoor access Points

The AP should support Wi-Fi 6 (IEEE 802.11ax)

Wi-Fi 5 (IEEE 802.11ac Wave 2)

480 Wi-Fi 4 (IEEE 802.11n)

IEEE 802.11b/g 2.4GHz, 2×2, MU-MIMO

5GHz, 2×2, MU-MIMO

AP WLAN feature:

SSID Hiding: Support

5G Priority (Band Steering): Support

Configuring the authentication mode, encryption mechanism and VLAN

481 attributes for each SSID: Support

Remote Intelligent Perception Technology (RIPT): Support

Intelligent Device Recognition Technology: Support

Intelligent Load Balancing Based on the Number of Users or Traffic,STA

Limit Control: SSID/Radio based

Bandwidth Control: STA/SSID/AP -based

AP should Support PSK and Web authenticationData Encryption: WPA

（TKIPWPA PSK、WPA2（AES）、WPA3、WEP（64/128bits ）PPSK

482 authentication,802.1X authentication, PEAP authentication, Data Frame

Filtering: Allow list, Static/Dynamic Block list, User Isolation, Rogue AP

Detection and Countermeasure, Dynamic ACL Assignment, RADIUS,CPU

Protection Policy (CPP)

Management features:

Management Protocol: Telnet, SSH, TFTP, FTP, WebWireless Intelligent

483 AI Optimization Service (WIS),SNMP V1, V2c, V3

Syslog / Debug, FAT/FIT/Cloud Managed Mode Firmware: Support FAT

(Standalone) or FIT or Cloud

10/100/1000M BASE-T Ethernet Port, PoE In (Support IEEE 802.3af) Full

Spectrum Operation in IEEE 802.3af Mode 1 RJ45 Console Port,

Bluetooth 5.1, RJ-45 management ports

485 5 UTM / Gateway Controller

486 The Gateway should have 24 1000BASE -T ports1 SFP port 1 SFP+ port

(non-combo), with minimum 6 WAN ports configurable

487 4 Gbps for 1518 bytes packet with minimum concurrent session support

for 3000000 sessions

Network Protocol:

Should have TCP/IP protocols, including IP, ICMP, TCP, UDP, etc.

Support multiple routing protocols, including static routing, RIP (V1 /

488 Support DHCP Relay and DHCP Server

Support PPPoE Client

Support NAT and multiple NAT ALG including FTP, H.323, DNS, etc.

Support ARP, trusted ARP, proxy ARP, etc.

Support Ping and Traceroute fault detection, WAN Load balancing

among 6 Wan ports

App visibility feature:

Support Application visibility for inbuilt definition as as well customisable

P2P: BitTorrent, eMule, Thunder, EDONKEY, FlashGet & etc.

Multimedia: YouTube, Facebook Video, WebEx Conference & etc.

Social Media: Facebook, Twitter, LinkedIn, Pinterest & etc.

VOIP/Chat: Skype, Viber, Google Hangout, Jabber, Facebook Messenger

Instant Messaging/Email: Gmail, MSN, QQ, YAHOO & etc.

Software Update: Window, McAfee, Kaspersky, ESET & etc.

Cloud-based File Collaboration: GoogleDrive, Dropbox, OneDrive, iCloud

Enterprise Application ：HTTP, FTP, SMTP, POP3, IMAP, Telnet, LOTUS-

NOTES, SQL Server, Oracle, Mysql, HTTPS & etc.

Firewall feature:

URL filtering Support HTTP/HTTPS domain filtering

Support remote HTTP automatic URL library upgrade

Local log storage (NAT log, traffic log, URL log, etc.)

Support storage on external log server Anti-ARP Spoofing

Defense against malicious attacks from internal and external networks

Support secure address binding

Prevent Port Scan Attack

Prevent Fragmentation Attack

Prevent ICMP Flood Attack

Prevent Teardrop Attack

Prevent Ping of Death Attack

Prevent Land Attack

Prevent Smurf / Fraggle attack

Prevent SYN Flood Attack

Management features:

Username/Password Auth (Local, Windows -based AD/LDAP Integration)

One-click Authentication;

Support remote HTTP online upgrade for signature library, software

492 6 IP Dome Camera

Digitally signed by JAYA

supply, fitting, fixing and testing of 5 MP IR VF Metal Dome Network

Camera (DAY/NIGHT),1/3" Progressive Scan CMOS,2560 ×

1440@30fps, 2.8 to 12 mm motorised Varifocal lens, Color: 0.01 Lux @

(F1.2, AGC ON),0.018 Lux @ (F1.6, AGC ON), 0 Lux with IR,H.265+,

H.265, H.264+, H.264,Three streams,120dB WDR, 2 behavior analyses,

and face detection, BLC/3D DNR/ROI,IP67, IK10,Built -in micro

SD/SDHC/SDXC card slot, up to 128 GB,3-Axis adjustment, Up to 50

Mtr IR Range, 3D DNR; ICR; EXIR, up to 30m; DC12V&PoE; Built-in

micro SD/SDHC/SDXC slot; cloud service, should have protection level

of IP67, IK10 TVS 2000V Lightning Protection, Surge Protection and

Voltage Transient Protection, should support ONVIF (PROFILE S,

PROFILE G), ISAPI. Warranty: - 5 Years. 30090.00

494 7 IP Bullet Camera

supply, fitting, fixing and testing of 5 MP IR VF Metal Bullet Network

Camera (DAY/NIGHT),1/3" Progressive Scan CMOS,2560 ×

1440@30fps, 2.8 to 12 mm motorised Varifocal lens, Color: 0.01 Lux @

(F1.2, AGC ON),0.018 Lux @ (F1.6, AGC ON), 0 Lux with IR,H.265+,

H.265, H.264+, H.264,Three streams,120dB WDR, 2 behavior analyses,

and face detection, BLC/3D DNR/ROI,IP67, IK10,Built -in micro

SD/SDHC/SDXC card slot, up to 128 GB,3-Axis adjustment, Up to 50

Mtr IR Range, 3D DNR; ICR; EXIR, up to 50m; DC12V&PoE; Built-in

micro SD/SDHC/SDXC slot; cloud service, should have protection level

of IP67, IK10 TVS 2000V Lightning Protection, Surge Protection and

Voltage Transient Protection, should support ONVIF (PROFILE S,

PROFILE G), ISAPI. Warranty: - 5 Years. 34810.00

496 IP PTZ Camera

Supply , installation , testing and commissioning of Supply, Installation,

Testing & Commissioning of 4 MP PTZ Camera , ONVIF profile S , G and

Q , UL,CE,FCC Certified , 36 X Optical Zoom , Focal length 4.3mm to

129 mm , 12 X digital zoom , Quad stream ,H.265 , H.264 video

compression support , frame rate 25 FPS @ 3MP , 50 FPS @ 2 MP ,2

streams simultanepusly at 1920 X 1080 p ,Shutter Speed : 1/1 ~

1/10000 sec , 360° endless Pan , -20° ~ 200° tilt , Pan Manual Speed :

0.1° ~ 300°/s , Tilt Manual Speed :0.1° ~ 200°/s , 256 presets , 120 dB

WDR ,Edge analytics : Abandoned Object, Intrusion Detection,

Tampering, Wrong Direction, Loitering Detection, Object Counting,

Stopped Vehicle, Object Removal , Inbuilt IR LED , IR Distance upto 200

mtrs , IP 66. Warranty: - 5 Years. 142780.00

498 8 NVR Processor

64 Channel NVR Processor :- Dual-core embedded processor,Operating

System : Pre-loaded Licensed OS,IP Camera Support : Min 32 Channel

or higher,Two way talk : 1 Channel O/P and 1 Channel I/P,Compression

: H.265, H.264, MJPEG4,Video Resolution: Should support up to 8MP IP

Camera. Video Recording (Incoming bandwidth) : 256 Mbps,Video

Display Split : 1/4/8/16/32,Video Loss: Support, Camera Blank :

Support,Alarm Input/ Output : Min 16 channel / Min 4 Channel or

betterHard Disk : Min 8 SATA ports , up to 32TB , Raid

(Redundancy),Smart Phone : iPhone, iPad, Android,

Windows,Phone,Protocol : IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP,UDP,

499 UPnP, ICMP, IGMP, SNMP,RTSP, RTP, SMTP,NTP, DHCP, DNS, PPPOE, Nos 2.00 0.00 684400.00

DDNS, FTP, IP Filter,ONVIF Profile S,User Account : 10 Users,Trigger

Event : Recording, Alarm, Video Push, Email,FTP,Recording Mode :

Manual , Schedule , STOP,Search Mode : Time/Date , Alarm , Motion

Detection ,Exact Search (accurate to second), Smart Search,Playback :

Play, Stop, Pause, Rewind, Fast Play, Next file, Previous file, Next

Camera, Previous Camera, Full Screen, Backup Selection,Backup Mode :

USB Device / Internal SATA / NetworkInterface Ports : 2 USB 2.0 , 1

RS485 , 1,RS232, 2 RJ45,Ethernet Ports : 2 RJ-45 port

(10/100M/1000M),Power SITC : AC 100V~240V 50/60Hz,Regulatory :

CE, FCC,UL and RoHS. Warranty: - 5 Years. 342200.00

500 9 Supply installation of 8TB surveillance SATA HDD. Nos 8.00 0.00 28910.00 231280.00

501 VOIP System

Supply and installation of IP PBX System support up to 2000 users and

minimum 200 concurrent calls, integrated 4 PSTN trunk FXO ports

through External Gateway, 4 analog telephone FXS ports with lifeline

502 10 capability and up to 50 SIP trunk accounts, Gigabit network ports with Nos 1.00 0.00 381140.00

Integrates PoE, USB, SD card, Supports up to a 5-level IVR (Interactive

Voice Response), Supports any SIP video endpoint that uses the H.264,

H.263 or H.263+ codecs.

Supply and installation of IP Based PoE Phone, 2 SIP accounts, 2 line

keys, 3-way conferencing, 3 XML programmable context -sensitive soft

keys, Dual-switched 10/100 mbps ports, integrated PoE, HD audio on

speakerphone and handset. 7469.40

Supply and installation of IP Based PoE Anroid Video Phone having 7"

Dispaly, with min16 line with up to 16 SIP accounts, Built-in 1 mega-

504 12 pixel CMOS tiltable camera for video calling with privacy wheel, Runs on Nos 4.00 0.00 181720.00

the Android 7.0 operating system, Built-in Bluetooth for syncing with

BLE Audio Devices. 45430.00

Supply and installation of Operator Console with 6 Lines, 6 SIP

505 13 Accounts, PoE + GigE, Color, 24 BLF Keys including 4Lines, 4 SIP Nos 1.00 0.00 60770.00

Accounts, IP Base PoE Phone. 60770.00

10 KVA UPS with SMF batteries suitable for minimum back time 60

(A) SITC of 1 no. 10 KVA UPS with SMF back-Up batteries, suitable for

60 minutes configuration with :- 415V, 3ph input & single phase output

ON-LINE UPS system backup protection for 60 minutes and all standard

accessories as required. The Inverter will have in built protection for

ground fault, DC reverse polarity, DC over voltage and current

limitation, AC short circuit, AC over Voltage and current limitation. The

UPS technology should consists of high double-conversion efficiency

IGBT Based rectifier on line type UPS. Warranty: - 3 Years.

508 Configuration of UPS :-

509 3 Phase input & single Phase output

510 The above mentioned on-line UPS must have following features

1) Upgradeability :- Suitable for 20 KVA UPS, and Should be upgradable

to work as parallel redundant UPS in load sharing mode.

512 2) Intelligent LCD display with event logging facility.

513 3) Double conversion.

514 4) Built in paralleling kit.

515 5) IGBT technology for Rectifier and Inverter.

516 6) Split Static, Manual & Maintenance Bypass.

517 7) Input power factor correction less than 0.95.

8) Input harmonic distortion less than 5% at 50% load. with the

518 application of IGBT(Insulated Gate By polar Transistor) based rectifier,

but 6/12 pulse is not applicable.

9) Software communication :- RJ-45 port to communicate with BMS and

Should be SNMP (Simple Network Management protocol) compatibility.

520 10) Phase reverse sequence operation

521 11) Automatic static bypass

Digitally signed by JAYA

522 12) Maintenance Bypass.

13) Technology : Micro processor based controls, true online, double

conversion type, should have cold start facility.

524 14) Overall Efficiency :> 90%

15) Charger :- Should have built in charger of minimum 10 Amp.

(separate from rectifier)

526 16) Back-up time :- 60 min. with SMF Batteries.

(B) SITC of Sealed Maintenance free batteries Shall be along with DC

breaker with enclosure of suitable capacity along with No-volt coil with

suitable capacity of contactor , U-Tube, required size and length of 4

core copper flexible cables along with terminals and all accessories as

required for protection of UPS. (For 10 KVA UPS). Minimum Guranttee

/Warranty Period:- 24 Months from the date of installation.

528 ( C ) SITC of Battery Rack and inter Link Cables.

Total Cost of 10 KVA ON LINE UPS (3 phase in coming and Single Phase

529 out going) & sealed maintenance free Batteries with Rack and inter Link Nos 1.00 0.00 453120.00

Cables. (A+B+C) (Cost for 1 set of 10 KVA UPS with Batteries & Rack)

Providing, drawing, connecting and testing of 12 Core unarmoured

unitube single Mode OM3 OFC (Fiber Optics cable) from wall mounted

rack to server room Rack,i,e Rack to Rack Connectivity) in existing

heavy duty 25 mm PVC Pipe. 141.60

Supplying and fixing of following sizes of Med. Class PVC conduit along

531 20 with the accessories in surface / recess & cutting the wall and making

good the same in case of recessed conduit as required.

Supplying and drawing of UTP 4 pair CAT6 A LSZH LAN & VOICE cable

534 21 (AWG 23)in the existing surface /recessed steel /PVC conduit as

required. (for Data / CCTV Outlet in existing conduit)

Supplying, fitting, fixing, connecting and testing CAT6 A UTP RJ45

Loaded patch panel & connector - 24 port loaded 19" panel - 1 U, Panel:

DC01 galvanised sheet steel, Compliant with standards: ISO/IEC 11801

Edition 3.0 CENELEC EN 50173-1 2007 ANSI/EIA/TIA 568 C2-1 IEC

series 60603-7, NFC 20730, Standard 8877 – 603.7, Contacts:

gold/nickel, thickness of gold > 0.8 μm minimum, Equipped with rear

cable guide to hold cable during maintenance,The connectors are

connected from the front without a special tool. Equipped with 4

cassettes of 6 RJ45 Cat. 6 connectors with toolless fast connection,

marked 568 A/B, Max. number of connections and disconnections: 5

without replacing the wire, Endurance: 2500 operations (plug-in/pull-

out) IK03, Operating temperature: -40°C to +70°C. 14750.00

Providing, fixing, fitting, connecting and testing of white RJ 45 Cat6 A

Data outlet /Toolless information outlets with white coloured RJ-45

transparent shuttered modular scoket outlets with front plate. ETL

539 23 verified to meet or exceed TIA / EIA category 6 requirements, universal Nos 150.00 0.00 132750.00

wiring label permitting to either T568A or T568B, UL listed, for

computer networking complete in all respect suitable to fix in modular

plate type switch system with connections as required. 885.00

Supply fitting, fixing, and testing of BLUE/YELLOW color CAT6 A LCS2

U/UTP 1 MTR (3.5 ft) factory made LCS2 Patch cord with boot Factory

540 24 Crimped PVC, Performance at 250MHz Should be as per Standards - Nos 180.00 0.00 63720.00

IEC 61935-2 - Ed. 3.0 ISO/IEC 11801, Usage Temp – 20 to + 60°C, No

of Twists 500, No of insertions 750, 24 AWG for rack end. 354.00

Supply fitting, fixing, and testing of BLUE/YELLOW color CAT6 A LCS2

U/UTP 2 MTR (6.57 ft) factory made LCS2 Patch cord with boot Factory

541 25 Crimped PVC, Performance at 250MHz Should be as per Standards - Nos 50.00 0.00 23600.00

IEC 61935-2 - Ed. 3.0 ISO/IEC 11801, Usage Temp – 20 to + 60°C, No

of Twists 500, No of insertions 750, 24 AWG for rack end. 472.00

Fiber LIU:- Providing, fixing, connecting and testing of Modular of 24

port loaded LIU SC type. Nos 8.00 0.00 21240.00

Fiber LIU:- Providing, fixing, connecting and testing of Modular of 12

port loaded LIU SC type. Nos 8.00 0.00 17700.00

Fiber Patch Cord:- Providing, fixing, fitting, connecting and testing of

OS1/OS2 SC/LC duplex patch cords 3 mtr, PC. Nos 8.00 0.00 8850.00

545 29 Fiber Module

Supply, Installtion & Commisioning of Multi Mode Fiber Module . Data

rate minimum 10 Gbps . Fiber connector – LC type, Operating

temperature minimum 0-60 Degree, RoHS Compliant, Should support

Digital optical mirror, Hot swappable Preffered 38940.00

547 30 Floor Mount 42 U Rack:-

Suply, fixing, fitting, installation and testing of floor mount 42 U

networking cabinet 19" along with all standard accessories. 800mm

548 (W), 1000mm (D), approx. Wt.140 Kg, CRCA 'D' grade 1.2mm thick

sheet, pwoder coated for cabinet RAL- 9017, 4mm Toughened Tinted

Glass Door and along with following accessories:

549 1. Cooling fan 220/230V AC, of 90 CFM-------4 Nos.

550 2. Cable manager Metal ------3 Nos.

552 4. Cable Channel 100mm wide. -----2 Nos.

553 5. Heavy Duty Stationary Shelf 600mm(W)X475mm(D) -1

6. Mounting Hardware (20 Sets of M-6 screws, washers, cage, nuts

(Nickle Coated) -------3 Nos.

555 7. Earthing strips copper 150mm H -----1 Nos.

556 8. Door Lock -----1 Nos.

557 9. Caster Wheels (with breake) -----2 Nos.

558 10. Caster Wheels (without breake) -----2 Nos.

559 11. Front Metal Band-----------1 No.

560 In the rack there must be maintained1 U = 1.75 inches space. Nos 1.00 0.00 81420.00 81420.00

561 31 Wall Mount 14 U Rack

Providing, fixing, fitting, installation and testing of of 17U Wall Mounted

Networking Cabinet 600X650 (HXWXD): Rack must be along with the

following components like; Width (mm)-600, Depth (mm) - 650,

Approx.Net Wt (kg) - 30, CRCA 'D' Grade thickness (mm) - 1.2, RAL

9017 (Matt Black), Glass - 4mm Toughened Tinted Glass Door,

562 Accessories:, Cooling Fan (230V A/C 90 CFM) - 4 Nos, PDU 230VAC - 2 Nos 10.00 0.00 236000.00

No, Cable Manager Metal- 4 Nos, Mounting Hardware (20 sets of M6

screws,washer,cage nuts (nickel coated)) - 1 No, Wall Screws (4 sets of

2'' screws, washer,rubber grommet (nickel coated)) - 1 No, Door Lock -

1 No, Front Metal Band -1 No. In the rack there must be maintained 1 U

= 1.75 inches space. 23600.00

563 32 Smart IPS LED Panel

Supply,installation, testing and commissioning of 75" 4k resolution

smart IPS led commercial panel along with required accessories.

566 Type: Edge LED BLU

Digitally signed by JAYA

567 Resolution: UHD (3840 x 2160)

568 Pixel Pitch (mm): 0.42975 x 0.42975

569 Active Display Area: 1650.24 (H) x 928.26 (V)

570 Viewing Angle(H/V): 178/178

571 Operation Hour: 16/7

573 H-Scanning Frequency: 30 ~ 81kHZ

574 V-Scanning Frequency: 48 ~ 75HZ

575 Maximum Pixel Frequency: 594MHz

577 Speaker Type: Built in Speaker (10W + 10W)

578 Connectivity

580 RGB: DVI-D

581 VIDEO: HDMI 2.0 (2)

582 AUDIO: Stereo Mini Jack, DVI/HDMI/

583 USB: USB 2.0 x 2

585 AUDIO: Stereo Mini Jack, DVI/HDMI/

588 Power Consumption

589 Rating[W/h]: 210

590 Mechanical

591 Weight (kg): 38.3

593 Operating Temperature: 0℃~ 40℃

594 Humidity: 10~80%

596 UHD Signage Display

597 Slim & Light Signage with

598 Built-in MagicInfo S6, SSSP 6.0

599 Temperature Sensor,Pivot Display

600 Clock Battery(168hrs Clock Keeping)

601 Built in Speaker(10W 2ch), IP5x Rating,

603 Auto Source Switching & Recovery,

604 LFD Home UI, Button Lock, Hot key

605 option, Plug&Play (Initial Setting)

606 Coretex A72 1.7GHz Quad-Core CPU

607 L1 Instruction Cache : 48KB

608 L1 Data Cache : 32KB

609 L2 Cache : 2MB

610 Internal Player

611 Memory: 2.5GB

612 Interface: LPDDR4 1.5GHz 64bit

Graphic resolution : 1920x1080

Output resolution : 3840x2160 (Scale up from graphic processing

616 Storage: 8GB (3.88GB Occupied by O/S, 4.12GB

617 Multimedia

618 *Video Decoder : MPEG-1/2/4, H.263,

619 H.264/AVC, UHD H.264/AVC, VC-1,

620 AVS+, HEVC, JPEG, PNG, VP8, VP9 *Au-

621 dio Decoder : AC3 (DD), MPEG

622 IO Ports: USB 2.0

623 Certification EMC

624 Environment

625 ENERGY STAR 7.0 (USA)

626 Epeat Quick Setup Guide

627 Warranty Card

628 Power Cord

629 Remote Controller

631 Accessories

633 Electrical work

Wiring for circuit/submain wiring alongwith earth wire with the following

634 33 sizes of FRLS PVC insulated copper conductor single core cable in

surface/recessed in existing PVC conduit as reqd.

637 Audio Visuals

Supply, installation, testing & commissioning of 12" two-way full range

638 34 dual vent bass reflex loudspeaker; Woofer size : 12"; compression Nos 6.00 0.00 531000.00

driver: 1.4" complete as reqd. as per the specificationsattached.

639 35 OEM manufactured mounting U-bracket for above speaker. Nos 6.00 0.00 6962.00 41772.00

Supply, installation, testing & commissioning of 8"two-way full range

loudspeaker; Woofer size : 8",Tweeter size : 1"; complete as reqd.

Supply, installation, testing & commissioning of audio control device with

8 configurable zone outputs; complete as reqd. Nos 1.00 0.00 277300.00

Supply, installation, testing & commissioing of eight channel Digital

642 38 Power amplifier, 8 x 250W @4Ω, bridgeable to 4 X 500W @ 8Ω , 512120.00

maximum power consumption :2200W complete as reqd. Nos 2.00 0.00 256060.00

Supply,installation, testing & commissioing of Dual Channel Digital

Power amplifier 2 x 600W @ 4Ω; 2 X 300W @ 8Ω, complete as reqd.

Supply, installation tesing & commissoning of twoway active loudspeaker

set; Woofer size : 5.25", Tweeter size : 1"; complete as reqd.

Supply, installation, testing & commissioning of wireless hand held

microphone with cardiod polarity pattern, complete as reqd. Nos 2.00 0.00 88500.00

Supply, installation, testing & commissioning of wireless lavalier

646 42 microphone with omnidirectional polarity pattern Frequency range: 470 65832.20

- 516 MHz ,516 - 558 MHz , 734 - 776 MHz, complete as reqd.

Supply, installation, testing & commissioning of active antenna splitter

647 43 2× 1:4 or 1× 1: Frequency range: 470 – 870 MHz at –3 dB, 23 dB (m) 62540.00

complete as reqd. Nos 1.00 0.00 62540.00

Supply, installation, testing & commissioning of directional antenna with

Impedance:50 Ω; Connector: BNC; Pickup pattern:

directional;Frequency range: 450 - 960 MHz Antenna gain: 4 dBi;

Opening angle: +- 50 degrees. Nos 1.00 0.00 34338.00

649 45 Antenna Booster from same OEM as of the antenna. Nos 2.00 0.00 18253.42 36506.84

Supply, installation, testing & commissioning of super-cardioid pre-

polarized condenser instrument microphone with frequency response of

650 46 40 Hz- 20 kHz and sensitivity of 3 mV/P at 1 kHz, Maximum SPL of 139 Nos 2.00 0.00 60156.40

dB at 1 kHz. nominal impedance of 50 Ω, with a min. terminating

impedance of 1 kΩ. complete as reqd. 30078.20

Digitally signed by JAYA

Supply, installation, testing & commissioning of dynamic cardioid vocal

651 microphone with frequency response of 40 Hz – 16 kHz and the

sensitivity of 2.7 mV/Pa at 1 kHz, nominal impedance of 350 Ω, with a

min. terminating impedance of k Ω. complete as reqd. 7225.14

Supply, installation, testing & commissioning of microphone set

consisting of steel drum case; 1 nos dynamic cardioid microphone with

an integral stand mount, fitted with a hum compensating coil for low

652 48 frequency instruments; 4 nos dynamic cardioid instrument microphone Nos 1.00 0.00 159709.46

for drums and percussion as well as brass and woodwind instruments; 2

nos super-cardioid pre-polarized condenser instrument microphone

complete as reqd.

Supply, installation, testing & commissioning of prepolarized condenser

gooseneck microphone with an overall length of minimum 450 mm and

with XLR3M-type connector at its base, which shall offer radio frequency

interference (RFI) shielding against intermodulation from wireless

equipment or devices, cardioid microphone capsule with uniform 120°

angle of acceptance (-3dB) or better,complete as reqd. 24067.28

Supply, installation, testing & commissioning of table stand for

connecting and operating XLR gooseneck microphones shall be rugged

654 50 and unobtrusive with XLR-3F microphone input and an XLR-3M Nos 1.00 0.00 22875.48

microphone output operating on 48 V phantom power and current

consumption of 3.7 mA or better complete as reqd. 22875.48

Supply,installation,testing,commissioning of Audio Mixer with 16 mic

Inputs with 48V Phantom power and HPF per Channel. Nos 1.00 0.00 46589.94

Provision of CABLES AND CONNECTORS - only for audio of reputed

SITC Euro standard 22 U Rack 800x1000 with power strips, Trays, Fan,

Castors, Lockabe doors. Nos 1.00 0.00 41300.00

658 LED Video Wall

SITC of Active LED Wall of Pixel Pitch :2.5 mm or better Minimum Size:

3.84 x2.15 meter with diagonal 173 Inch .with predefined resolution

according to pixel pitch. Includes: LED Cabinets. LED Controller &.

Software Slim Cabinet i.e. 40 mm or less. Viewing Angle 160 / 140 or

better Cabinet - 960x270x40 MM. Refresh Rate 3840 Hz or more •

Minimum Brightness 800 nits or more. Max[l]Power Consumption -550

W. Lifetime 1.00.000 hours or more. Contrast TYP 7000:1 or more .

with 2 years warranty . Surface Treatment - Less than /equal to 0.3

MM. Inbuilt Controller with HMDI. DVI input. OEM should have service

centre in State and 10 Years presence in India.

660 Desktop Computer

661 60 13th Generation Intel® Core™ i5 processor

662 Windows 11 Professional

663 60.5 cm (23.8) diagonal FHD display with Intel® Intergrated Graphics

664 8 GB DDR4 RAM

665 512 GB SSD Solid State Drive

White Wireless Keyboard and Mouse Combo, True Vision 1080p FHD IR

tilt privacy camera, 1 HDMI-out 1.4 88500.00

668 K FURNITURE

669 A LIBRARIAN ROOM

Providing and fixing in position Librarian Table using 25 mm / 18 mm

Engineered wood and metal legs with modesty. All external surfaces to

670 A.1 be finished with SF laminate with thickness 1.00mm and internal surface NOS 1.00 0.00 58351.00 58351.00

to be finished with inner white colour laminate of thickness 0.72mm. The

rate also includes providing screws etc & complete as per drawing.(5m x

Providing and fixing in position Credenza using 18 mm / 09 mm

Engineered wood. All external surfaces to be finished with SF laminate

671 A.2 with thickness 1.00mm and internal surface to be finished with inner NOS 1.00 0.00 12698.64 12698.64

white colour laminate of thickness 0.72mm. The rate also includes

providing handles, locks,screws etc & complete as per drawing.(3.5m x

Providing high back chair with PP fixed arms. Gas lift, nylon base and

sheat and back mesh tapestry.

Providing low back chair with fixed arms. Back plastic, swivel tilt, gas lift,

nylon base and sheat leathaerette tapestry. )

Providing and fixing in position FILE STORAGE using 18 mm / 09 mm

Engineered wood. All external surfaces to be finished with SF laminate

674 A.5 with thickness 1.00mm and internal surface to be finished with inner NOS 2.00 0.00 33040.00 66080.00

white colour laminate of thickness 0.72mm. The rate also includes

providing handles, locks,screws etc & complete as per drawing.(3m x

675 B INSIGHT ROOM (14 insight rooms)

Providing Insight Table with powder Coated and Chrome Plated Pipe

676 B.1 Frame. Table Top will be of 25mm Engineered wood with edge banded in NOS 14.00 0.00 37760.00 528640.00

sides.(5m x 3m x 2.5m)

Providing medium back chair with fixed PP arm, gas lift. Seat and back is

of mesh tapestery and nylon base.

Providing and fixing in position Bookshelf with double side opening

using25mm / 18 mm Engineered wood. All external surfaces to be

678 B.3 finished with SF laminate with thickness 1.00mm and internal surface to NOS 6.00 0.00 41300.00 247800.00

be finished with inner white colour laminate of thickness 0.72mm. The

rate also includes providing handles, locks,screws etc & complete as per

drawing. (6m x 2.5m x 4m)

Providing and fixing in position Bookshelf with double side opening

using25mm / 18 mm Engineered wood. All external surfaces to be

679 B.4 finished with SF laminate with thickness 1.00mm and internal surface to Sqm 1.00 0.00 88500.00 88500.00

be finished with inner white colour laminate of thickness 0.72mm. The

rate also includes providing handles, locks,screws etc & complete as per

drawing. (8.33m x 2.5 m x 4m)

680 C RESEARCH ROOM

Providing and installing 1000mm x 600mm x 750mm Table top made of

25mm thick Engineering wood Board laminate finished of approved

colour , all exposed edges finished with 2mm x 22mm and 2mm x

18mm PVC hot pressed lipping of approved profile, all of approved

681 C.1 shade and colour. The partition with necessary powder coated heavy SQM 7.00 0.00 13688.00 95816.00

duty MS brackets, cleats etc. for supporting table tops and rates shall

include that for 1 nos. matching to top, ABS wire manager (standard

size) per work station, complete as per drawings & direction. (2m x

Providing low back chair with fixed arms. Back plastic, swivel tilt, gas lift,

nylon base and sheat leathaerette tapestry. NOS 0.00

683 D INFORMATION KISOK AREA

Providing and fixing in position Reception Table using 18 mm / 09 mm

Engineered wood. All external surfaces to be finished with SF laminate

with thickness 1.00mm and internal surface to be finished with inner

684 D.1 white colour laminate of thickness 0.72mm. In reception table 2 nos of Sqm 1.00 0.00 141600.00 141600.00

storage of one drawer and 1 door cabinet is also included. The rate also

includes providing handles, locks,screws etc & complete as per

drawing.(14m x 3.33m x 2.5m)

Providing high back chair with PP fixed arms. Gas lift, nylon base and

sheat and back mesh tapestry.

Digitally signed by JAYA

Providing and fixing in position Display Rack using 18 mm / 09 mm

Engineered wood. All external surfaces to be finished with SF laminate

686 D.3 with thickness 1.00mm and internal surface to be finished with inner Sqm 152.00 0.00 1509.54 229449.87

white colour laminate of thickness 0.72mm. The rate also includes

providing handles, locks,screws etc & complete as per drawing.(19m x

Providing and fixing in position Open Rack with steel lockers using 18

mm / 09 mm Engineered wood. All external surfaces to be finished with

687 D.4 SF laminate with thickness 1.00mm. The rate also includes providing Sqm 10.00 0.00 46610.00 466100.00

handles, locks,screws etc & complete as per drawing.(3m x 1.5m x

Providing Staff Locker made of Steel Personal Locker (Digital Lock)

688 D.5 which includes 12 Locker in one cabinet and its thickness is 0.8mm NOS 4.00 0.00 71980.00 287920.00

690 E READING AREA - BACKSIDE OF INFORMATION KIOSK AREA

Providing and fixing in position Customized round book cases with

seating area using 25mm / 18 mm / 09 mm/6mm BWP plywood and

block board and flexible plywood. All external surfaces to be finished

691 E.1 with SF laminate finish with thickness 1.00mmand flexible laminate. The Sqm 71.35 0.00 22227.47 1585919.89

rate also includes seating area cushioning of leatheritte material and as

per advised colour by the engineer as per drawing.(19.5m x 1.21m

Providing and fixing in position Customized L-Shape seating area using

18 mm / 09 mm BWP plywood and block board and flexible plywood. All

692 E.2 external surfaces to be finished with SF laminate finish with thickness Sqm 22.30 0.00 8255.92 184080.00

1.00mmand flexible laminate. The rate also includes seating area

cushioning of leatheritte material and as per advised colour by the

engineer as per drawing.(24.3m x 0.91m x 22.29m)

693 F CHILDRENS LIBRARY

Providing and fixing in position Customized tree seating area using 18

mm / 09 mm BWP plywood and block board and flexible plywood. All

694 F.1 external surfaces to be finished with SF laminate finish with thickness Sqm 2.62 0.00 31753.54 83249.01

1.00mmand flexible laminate. The rate also includes seating area

cushioning of leatheritte material and as per advised colour by the

engineer as per drawing.(5.18m x 1.21m x 0.50m)

Providing and fixing in position Customized L-Shape seating area using

18 mm / 09 mm BWP plywood and block board and flexible plywood. All

695 F.2 external surfaces to be finished with SF laminate finish with thickness Sqm 1.53 0.00 40644.53 62303.99

1.00mmand flexible laminate. The rate also includes seating area

cushioning of leatheritte material and as per advised colour by the

engineer as per drawing. (3.35m x 0.60m x 0.45m)

Providing and fixing in position Customized C-Shape bookshelf using

25mm / 18 mm / 09 mm BWP plywood and block board and flexible

plywood. All external surfaces to be finished with SF laminate finish with

thickness 1.00mmand flexible laminate.(6.70m x 0.76m x 1.21m)

Providing and fixing in position Customized S-Shape bookshelf using

25mm / 18 mm / 09 mm BWP plywood and block board and flexible

plywood. All external surfaces to be finished with SF laminate finish with

thickness 1.00mmand flexible laminate. (11.27m x 0.60m x 1.21m)

698 G CAFETERIA

Providing and fixing in position Base unit using 19mm/18 mm BWP

plywood / HDHMR Board. All external surfaces to be finished with glossy

699 G.1 1.00mm laminate and internal surface with White matt laminate. The Sqm 4.14 0.00 24132.69 99892.31

rate also includes providing Handles,hinges Etc..Complete as per dwg.

Providing and fixing in position Cafe Bar Table using 25 mm / 18 mm

Engineered wood and metal legs. All external surfaces to be finished

700 G.2 with SF laminate with thickness 1.00mm and internal surface to be Sqm 1.00 0.00 102660.00 102660.00

finished with inner white colour laminate of thickness 0.72mm. The rate

also includes providing screws etc & complete as per drawing. ( 25m x

Providing and fixing in position Cafe Bar Table using 25 mm / 18 mm

Engineered wood and metal legs. All external surfaces to be finished

701 G.3 with SF laminate with thickness 1.00mm and internal surface to be

finished with inner white colour laminate of thickness 0.72mm. The rate

also includes providing screws etc & complete as per drawing.

702 G.4 BAR CHAIRS FOR CAFÉ BAR TABLE NOS 5.00 0.00 8378.00 41890.00

704 H E-LIBRARY

Providing and installing 1000mm x 600mm x 750mm Table top made of

25mm thick Engineering wood Board laminate finished of approved

705 H.1 colour , all exposed edges finished with 2mm x 22mm and 2mm x Sqm 37.00 0.00 8850.00 327450.00

18mm PVC hot pressed lipping of approved profile, all of approved

shade and colour. The table also includes necessary hardwares i.e.,

screws, buffers etc.

Medium Back Chair, Fixed PP Arm, Gas Lift, Nylon Base, Seat & Back

Providing Book Case of steel sloted angle rack with powder coated grey

colour or as per advised by on site engineer. (3m x 1m x 6m)

708 I AUDIO-VISUAL HALL

Visitor Chair, PU Arms, Silver Powder Coated Pipe Stand, Mesh Back &

Seat Fabric Tapestry

Providing and fixing in position Podium using 18 mm / 09 mm

Engineered wood. All external surfaces to be finished with SF laminate

with thickness 1.00mm. The rate also includes providing handles,

locks,screws etc & complete as per drawing.

711 J ART GALLERY

Providing and fixing in position Open Rack with steel lockers using 18

mm / 09 mm Engineered wood. All external surfaces to be finished with

712 J.1 SF laminate with thickness 1.00mm. The rate also includes providing Sqm 10.00 0.00 53100.00 531000.00

handles, locks,screws etc & complete as per drawing.(3m x 1.5m x

Providing Staff Locker made of Steel Personal Locker (Digital Lock)

713 J.2 which includes 12 Locker in one cabinet and its thickness is 0.8mm NOS 4.00 0.00 71980.00 287920.00

714 K RECORD ROOM

Providing and fixing in position BOOK CASE CABINET using 18 mm / 09

mm Engineered wood. All external surfaces to be finished with SF

715 K.1 laminate with thickness 1.00mm and internal surface to be finished with NOS 8.00 0.00 33040.00 264320.00

inner white colour laminate of thickness 0.72mm. The rate also includes

providing handles, locks,screws etc & complete as per drawing.(3m x

Digitally signed by JAYA