Supply Fabrication Erection of Steel Structures Earthing Steels Paintings Handling and Erection of Department Equipments etc for the Establishment of 110 KV Bay Extension for PATTUKKOTTAI Railway Traction feeder at ADHIRAMPATTINAM 110 KV SS

Amount

Schedule I (SS End)

Schedule II (Metering End)

Applicable GST Amount (Total GST Amount @18%)

Description of Work / Item(s)

Amount

Supply of various types of hot dip galvanised fabricated steel structures confirming to IS 2062 Gr A at site as per the std.design/ Drawing, including Freight & Handling, Loading, unloading, Labour, machinery and Consumables and as directed by the field Engineer at the SS site.

110kV Structures (3 m centre to centre)

110kV Take off/ Strung Bus structure using Double Butt pole 200x100 RSJ.

110kV Take Off/Strung Bus structure using Single pole 250x125RSJ.

110kV AB Switch Structure

110kV Pie Support Structure

110kV CT or PT Structure

110kV LAS Structure below Strung Bus

Non-specfied hot dip galvanized structures, Extension, Alterations, and Deductions as per station requirement.

Heavy section using RSJ 250 x 125 mm

Light section (other than heavy section)

Supply of various types of steels including Cost of steel, Freight & Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables and as directed by the field Engineer at the SS site.

Other Station Structures

110kV Breaker Platform

Labour for the Erection of the fabricated steel structures at the SS site with Supply of GI Bolts, Nuts & Washers (Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer.

110kV Structures (3 m centre to centre)

110kV Take off/ Strung Bus structure using Double Butt pole 200x100 RSJ.

110kV Take Off/Strung Bus structure using Single pole 250x125RSJ.

110kV AB Switch Structure

110kV Pie Support Structure

110kV CT or PT Structure

110kV LAS Structure below Strung Bus

Non-specified structures, Extension, Alterations, and Deductions as per station requirement.

Heavy section using RSJ 250x125mm/ 200x100mm

Light section (other than heavy section)

Other Station Structures

110kV Breaker Platform

Supply and fabrication and erection of Galvanized Iron eye bolts/ grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer

Grout Bolt

Eye Bolt

EARTHINGS

Supply of Various types of Steel materials confirming to ISS 2062 –Gr A including, Freight, Handling, etc., at site for Earthing with Labour for Fabrication & erection for Earthing including Labour, Machinery and Consumables as Required and as directed by the Field Engineer.

Labour for excavating and refilling of earth /trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field Engineer.

Normal clay / hard gravel soil

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder (Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer (Earth to be supplied by the contractor)

Supply and providing of 450-600 mm dia, 300 mm height, 36 mm thick cement collar for identification of earth electrode location as directed by the field Engineer.

Transportation of Department materials by the Contractor from any department stores to site or as directed by the field Engineer. Damages if any will be recovered from the contractor.

Hire Charges per day for 1 No. Diesel driven lorry of 10 T capacity upto 24hrs a day normally upto 100kms

Hire charges upto 100kms

kilometer charges in excess of 100 kms in a day additional charges per km

From 1Hour to 6Hours – 25% of hire charges

Insurance coverages for transporting both fragile and Non-fragile of Equipment in contractor's Diesel driven lorry of 10T capacity from store to site or as directed by field Engineer

Handling : Labour for the loading/ unloading/ shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation.

Non-Fragile Materials

110kV Isolators

Cables/Conductors including cutting and rewinding

Busbars

Fragile Materials

110kV Breaker

230/110kV CT/PT/LAS/CVT/CC/WT/Others

110kV Insulators

33/22/11kV Insulators

AC/DC/C&R Panels of Non grid type, Single feeder Control/ Relay Panels of Grid type

BUS RELATED Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including Meggering, hoisting of insulators and consumables and as directed by the field Engineer.

110kV Single Conductor Strung Bus/phase

Labour for the erection of Insulator single pole stack for supports/ Underhang including Meggering & other consumables and as directed by the field Engineer.

110kV or 66kV

Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field Engineer.

75 mm (1 length)

Labour for the Erection of Jumper/ Droppers using Moose/ Zebra/ panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field Engineer.

POWER CONNECTORS Supply & Fixing of Aluminium Power Connectors/ Clamps/ Fittings with SS Bolts and Nuts, including, freight etc., confirming to IS as per the drawing and specification.

6- Bolt Tension fitting

Switch End Clamp for Zebra

Switch End Clamp for Panther

Switch End Clamp for 75mm Bus

T clamp for Zebra to Zebra

T Clamp for 75mm Bus to Zebra

Free End clamp 75mm

PG Clamp for Zebra

75mm Corona Bell

OUTDOOR BREAKERS :Labour for the Erection of 230/110kV Breakers complete set using Crane with proper levelling, proving holes cutting, jointing, bending of pipes wherever required and filling of SF6 gas, Providing conductor jumpers from the Breaker to CT's & Isolators, Supply & Erection of Earthing steels two Riser to Breaker Structure from Earthmat/ electrode using 65x10/ 50x8 MS Flat Providing Flexible tinned copper Earthing loops (4nos/ 3nos) to the Breaker earthing points, Supply & painting of first primer coat of redoxide and two coats of Bus green Enamel paint on to the Earth risers including cost of reputed make paints, consumable, freight, etc., and as directed by the field Engineer.

110kV Breaker using Crane arranged by the Contractor

MEASUREMENT TRANSFORMERS : Labour for the erection of 3 Nos Measurement Transformers using Crane, Supply and Erection of Earthing steels using (65x10 for 230kV SS) 50x8 MSF & Flexible tinned copper loops to CT/PT for equipment & Junction box earthing, structure earting, Erection of CT/PT Junction boxes, Supply and erection of Fixing steels, Painting of Primer Redoxide, Two coats of Bus Green enamel Paint on Earthing steels with supply of reputed make paints, including, freight & all consumables as directed by the field Engineer.

110kV using crane arranged by the Contractor

ISOLATORS & HG FUSE SET: Labour for the Erection of Isolators to correct alignment, including the cost of Consumables and lubricants, Meggaring, replacement of insulators if necessary etc, Supply and erection of Earthing steels to Isolator Bases, Insulators, ABS Booms, Poles, Earth Blades, operating Mechanism earthing etc., using (65x10 MSF for 230kV SS) 50x8 MSF, Supply and Erection of 25 x 3mm² Flexible tinned copper to the centre Rotating Insulators, Mechanism Box etc, Supply and Applying of one coat of Primer Redoxide paint and Two coats of Bus Green Enamel Paint on earthing material including Freight, consumables etc.,.as directed by the field Engineer.

110kV Isolators with Earth hand Operated

110kV Isolators W/O Earth - hand Operated

LAS: Labour for erection of LAS station/ Distribution type single unit including monitors & accessories.

CONTROL ROOM MATERIALS : Labour for the Erection of Control Panels includings consumables as directed by the field Engineer.

Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/ Relay Panels of Grid type (P&C)

Supply and Erection of GI pipe 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs & 2.5inch dia for 2mtrs) including single/double fitting (Straight or 'V' type) fixing arrangements, 1 inch dia B class pipe arms, yard light box fixing flat

Supply and Erection of No.6 swg GI Solid wire for earthing or any other purpose as directed by the field Engineer

Supply and Erection of reputed make street light fitting with 1x(70-75)W or 2x(35-40)W, 240V CGL/ PHILIPS make LED Light.

Supply of Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet including primer paint as per Drawing including the Supply, Fabrication and Erection of Box fixing Flat using 50x8MSF, Two coat of enamel paints, provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, freight, etc and as directed by the fiels Engineer on site requirements. (The box shall be vermin proof, shall be provided with sturdy hinges, with provision for cable entry and locking arrangements).

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply, Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible tinned copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/ MCBs including consumables, freight, etc., as directed by the field Engineer on site requirements. (The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Painting: Labour charges for two coats of enamel painting in substation structures, steels etc., including the cost of reputed make paints and other consumables as directed by the field Engineer.

Other Station Structures

110kV Breaker Platform

250 x 125 RSJ Pole Bottom (height 0.45 to 0.5 m )

200 x 100 RSJ Pole Bottom (height 0.45 to 0.5 m )

Yard Light Pole Bottom

Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field Engineer.

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field Engineer.

Cables: Labour for erection of cable in duct/ trench/ clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables including fabrication of clamps and fixing at uniform intervals as directed by the field Engineer

Up to 8 Core

Above 8 Core

STATION ACCESSORIES

Providing PVC down fall pipe using 110mm dia 4Kg/sqcm, PVC pipe and PVC clamp line supreme ec, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers as required and as directed by the field Engineer.

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field Engineer.

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field Engineer. (No.of core ends in unit of 1000).

Supply and erection of Vinyl Sticker cutting/ Printing on Vinyl Sticker/ Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field Engineer.

Supply and erection of "B" class G.I.pipe for extension of tandem/ down pipe for A.B.Switches and for any other work required as directed by the field Engineer.

40 mm Dia

Supply and provision of 12/25x3mm flexible braided tinned copper / tinned copper flats as required and as directed by the field Engineer.

Supply & Crimping of Copper Lugs of Suitable sizes as required and as directed by the field Engineer.

Supply and fixing Fuse unit of reputed make with ISI as directed by the field Engineer including drilling &fixing.

HRC Backlite Fuse units

Supply and fixing of MCB of Havells/Schneider/ MDS/ Reputed make with ISI mark wherever required as directed by the field Engineer.

32 AMPS - 3 phase, 4 pole

Supply and fixing of Terminal blocks of reputed make such as Elmex/WAGO/ Connectwell/ Phoenix as directed by the field Engineer.

Disconnecting type (Link type)

Supply and provision of M8, M10, M12 and M16 (full /Half thread) G.I.bolt and nuts of various sizes including plate/ spring washers as required and as directed by the field Engineer.

Supply and fixing of godrej 6 lever long shackle navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.

Labour for Dismantling of steel structures including all consumables

Light section (below 14 kg/m) LC INVOLVED

Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including Meggering, hoisting of insulators and consumables and as directed by the field Engineer.

(c) 110kV Single Conductor Strung Bus/phase LC INVOLVED

Labour for the erection of Insulator single pole stack for supports/ Underhang including Meggering & other consumables and as directed by the field Engineer.

( b) 110kV or 66kV LC INVOLVED

(21) Labour for the Erection of Jumper/ Droppers using Moose/ Zebra/ panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field Engineer. LC INVOLVED

Description of Work / Item(s)

Amount

Supply of various types of hot dip galvanised fabricated steel structures confirming to IS 2062 Gr A at site as per the std.design/ Drawing, including Freight & Handling, Loading, unloading, Labour, machinery and Consumables and as directed by the field Engineer at the SS site.

110kV Structures (3 m centre to centre)

110kV Take off/ Strung Bus structure using Double Butt pole 200x100 RSJ.

110kV AB Switch Structure

110kV CT or PT Structure

110kV LAS Structure below Strung Bus

Non-specfied hot dip galvanized structures, Extension, Alterations, and Deductions as per station requirement.

Heavy section using RSJ 200 x 100 mm

Light section (other than heavy section)

Labour for the Erection of the fabricated steel structures at the SS site with Supply of GI Bolts, Nuts & Washers (Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer.

110kV Structures (3 m centre to centre)

110kV Take off/ Strung Bus structure using Double Butt pole 200x100 RSJ.

110kV AB Switch Structure

110kV CT or PT Structure

110kV LAS Structure below Strung Bus

Non-specified structures, Extension, Alterations, and Deductions as per station requirement.

Heavy section using RSJ 250x125mm/ 200x100mm

Light section (other than heavy section)

Supply and fabrication and erection of Galvanized Iron eye bolts/ grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer

Eye Bolt

EARTHINGS

Supply of Various types of Steel materials confirming to ISS 2062 –Gr A including, Freight, Handling, etc., at site for Earthing with Labour for Fabrication & erection for Earthing including Labour, Machinery and Consumables as Required and as directed by the Field Engineer.

Labour for excavating and refilling of earth /trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field Engineer.

Normal clay / hard gravel soil

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder (Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer (Earth to be supplied by the contractor)

Supply and providing of 450-600 mm dia, 300 mm height, 36 mm thick cement collar for identification of earth electrode location as directed by the field Engineer.

Transportation of Department materials by the Contractor from any department stores to site or as directed by the field Engineer. Damages if any will be recovered from the contractor.

Hire Charges per day for 1 No. Diesel driven lorry of 10 T capacity upto 24hrs a day normally upto 100kms

Hire charges upto 100kms

kilometer charges in excess of 100 kms in a day additional charges per km

Rentention charges beyond 24 Hours a day

From 1Hour to 6Hours – 25% of hire charges

Insurance coverages for transporting both fragile and Non-fragile of Equipment in contractor's Diesel driven lorry of 10T capacity from store to site or as directed by field Engineer

HANDLING

Labour for the loading/ unloading/ shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation.

Non-Fragile Materials

110kV Isolators

Cables/Conductors including cutting and rewinding

Fragile Materials

230/110kV CT/PT/LAS/CVT/CC/WT/Others

110kV Insulators

Bus Related : Labour for the erection of Insulator single pole stack for supports/ Underhang including Meggering & other consumables and as directed by the field Engineer.

110kV or 66kV

Labour for the Erection of Jumper/ Droppers using Moose/ Zebra/ panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field Engineer.

POWER CONNECTORS

Supply & Fixing of Aluminium Power Connectors/ Clamps/ Fittings with SS Bolts and Nuts, including, freight etc., confirming to IS as per the drawing and specification.

Switch End Clamp for Zebra

Switch End Clamp for Panther

T clamp for Zebra to Zebra

PG Clamp for Zebra

MEASUREMENT TRANSFORMERS

Labour for the erection of 3 Nos Measurement Transformers using Crane, Supply and Erection of Earthing steels using (65x10 for 230kV SS) 50x8 MSF & Flexible tinned copper loops to CT/PT for equipment & Junction box earthing, structure earting, Erection of CT/PT Junction boxes, Supply and erection of Fixing steels, Painting of Primer Redoxide, Two coats of Bus Green enamel Paint on Earthing steels with supply of reputed make paints, including, freight & all consumables as directed by the field Engineer.

110kV using crane arranged by the Contractor

ISOLATORS & HG FUSE SET

Labour for the Erection of Isolators to correct alignment, including the cost of Consumables and lubricants, Meggaring, replacement of insulators if necessary etc, Supply and erection of Earthing steels to Isolator Bases, Insulators, ABS Booms, Poles, Earth Blades, operating Mechanism earthing etc., using (65x10 MSF for 230kV SS) 50x8 MSF, Supply and Erection of 25 x 3mm² Flexible tinned copper to the centre Rotating Insulators, Mechanism Box etc, Supply and Applying of one coat of Primer Redoxide paint and Two coats of Bus Green Enamel Paint on earthing material including Freight, consumables etc.,.as directed by the field Engineer.

110kV Isolators with Earth hand Operated

110kV Isolators W/O Earth - hand Operated

Labour for erection of LAS station/ Distribution type single unit including monitors & accessories.

110kV LAS with surge monitors

CONTROL ROOM MATERIALS

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply, Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible tinned copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/ MCBs including consumables, freight, etc., as directed by the field Engineer on site requirements. (The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Painting: Labour charges for two coats of enamel painting in substation structures, steels etc., including the cost of reputed make paints and other consumables as directed by the field Engineer.

Other Station Structures

200 x 100 RSJ Pole Bottom (height 0.45 to 0.5 m )

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field Engineer.

Cables: Labour for erection of cable in duct/ trench/ clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables including fabrication of clamps and fixing at uniform intervals as directed by the field Engineer

Up to 8 Core

Above 8 Core

STATION ACCESSORIES

Providing PVC down fall pipe using 110mm dia 4Kg/sqcm, PVC pipe and PVC clamp line supreme ec, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers as required and as directed by the field Engineer.

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field Engineer.

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field Engineer. (No.of core ends in unit of 1000).

Supply and erection of Vinyl Sticker cutting/ Printing on Vinyl Sticker/ Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field Engineer.

Supply and erection of "B" class G.I.pipe for extension of tandem/ down pipe for A.B.Switches and for any other work required as directed by the field Engineer.

40 mm Dia

Supply and provision of 12/25x3mm flexible braided tinned copper / tinned copper flats as required and as directed by the field Engineer.

Supply & Crimping of Copper Lugs of Suitable sizes as required and as directed by the field Engineer.

HRC Backlite Fuse units

Supply and fixing of Terminal blocks of reputed make such as Elmex/WAGO/ Connectwell/ Phoenix as directed by the field Engineer.

Disconnecting type (Link type)

Supply and provision of M8, M10, M12 and M16 (full /Half thread) G.I.bolt and nuts of various sizes including plate/ spring washers as required and as directed by the field Engineer.

Supply and fixing of godrej 6 lever long shackle navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.