Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.7 LAccepted-AOC OFFICE 4 9 SWARG ASHRAM NANAK RAM COLONY PARMANAND CHOWK DELHI 110009 | DELHI | DELHI | DELHI | 110009 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹25.9 L+₹3.0 L (13.3%)Rejected-Finance | L2 | Rejected-Finance Being not Lowest | |
| 3 | L3₹26.2 L+₹3.3 L (14.5%)Rejected-Finance 22 1755A KANNANKATTU TEMPLE ROAD EDAKOCHI KOCHI 682010 ERNAKULAM KERALA 682010 | ERNAKULAM | KERALA | 682010 | L3 | Rejected-Finance Being not Lowest | |
| 4 | L4₹27.7 L+₹4.8 L (21.1%)Rejected-Finance | L4 | Rejected-Finance Being not Lowest | |
| 5 | L5₹28.8 L+₹5.9 L (25.6%)Rejected-Finance D 35 1ST FLOOR CLOCK TOWER HARI NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L5 | Rejected-Finance Being not Lowest |
| Sl No | Description | Qty | Unit | sanjay traders L3 | AGARWAL BUILDERS L4 | Ms Kailash Chandra Babulal L8 | M/s Gupta Constructions L9 | Auto Traders L6 | M/s Himgiri construction L1 | M/s Navansh Engineers & Consultants L5 | Vinayak Trading House L7 | MODI CORPORATION L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down of old unserviceable LT panel board complete with all fittings and accessories of any capacity incl disconnecting all incoming and out going connections by removing cable glands , lugs, nut bolt and washers incl breaking of PCC for removing MS angle iron any size removing the loop of cables carefully complete all as specified and directed.
Note:
(a) Necesssary shut down shall be taken in writing before disconnecting all cables.
(b) M&L for Arrangement of Alternative/Bypass supply with all protective measures to the living accn shall deemed to be included in the quoted rates. | 7 | Each | 2,000 ₹14,000 | 500 ₹3,500 | 100 ₹700 Lowest | 500 ₹3,500 | 1,500 ₹10,500 | 650 ₹4,550 | 1,000 ₹7,000 | 500 ₹3,500 | 600 ₹4,200 |
| 2.00 | Supply, Installation, testing and commissioning of LT out door type panel board of suitable size factory assembled and fabricated(CPRI approved) and of suitable size and angle iron channel and MS sheet 3 mm to 3.15 mm thick (Inner compartment is 2.0mm thick) double door type, front and rear openable with locking arrangement duly powder coated, painted with metallic paint of approved colour, and independely housing for each control switch gear duly pre wired with colour coding for three phases and neutral, aluminum bus bar 600 Amps for 415 volts, 50 Hz electric supply with and including suitable sizes of cable glands for incomming and outgoing cables,grouting the panel boardon suitablePCC foundation , structure made out of equal angle iron of size 50x50x6 mm complete with the following switch gears/accessories:- Make of MCCB : L & T / ABB / Schneider / Legrard/ havells / C & S Electric
Incomming:-
(a) MCCB TPN 400 Amps, 50 KA, 415 Volts, Ics=100% Icu, Adjustable short circuit setting type-01 Nos
(b) Ammeter 0-600 Amps with CT rating and selector switch -01 Nos (c) Volt meter with selector switch 0-500 volt-01 Nos
(d) Indicating lamp(RYB)-01 set
Outgoing :-
(a) MCCB TPN 100 Amps, 35 KA, 415 Volts, Ics=100% Icu, Adjustable short circuit setting type-06 Nos
(b) MCB TPN 32 Amps, 16 KA, 415 Volts-01 Nos
Note : Drawing of LT panel shall be submitted by the contractor duly showing the size and dimention of MCCBs/MCBs and Bus Bar and should be got duly approved by Engr In charge before execution at site. | 2 | Each Job | 1,50,000 ₹3,00,000 | 1,60,000 ₹3,20,000 | 1,95,000 ₹3,90,000 | 2,08,900 ₹4,17,800 | 1,89,000 ₹3,78,000 | 1,22,450 ₹2,44,900 Lowest | 1,72,500 ₹3,45,000 | 1,93,500 ₹3,87,000 | 1,60,000 ₹3,20,000 |
| 3.00 | Supply, Installation, testing and commissioning of LT out door type panel board of suitable size factory assembled and fabricated(CPRI approved) and of suitable size and angle iron channel and MS sheet 3 mm to 3.15 mm thick (Inner compartment is 2.0mm thick) double door type, front and rear openable with locking arrangement duly powder coated, painted with metallic paint of approved colours, and independely housing for each control switch gear duly pre wired with colour coding for three phases and neutral, aluminum bus bar 600 Amps for 415 volts, 50 Hz electric supply with and including suitable sizes of cable glands for incomming and outgoing cables,grouting the panel boardon suitablePCC foundation , structure made out of equal angle iron of size 50x50x6 mm complete with the following switch gears/accessories:- Makes: L & T / ABB / Schneider / Legrard/ havells / C & S Electric
Incomming:-
(a) MCCB TPN 400 Amps, 50 KA, 415 Volts, Ics=100% Icu, Adjustable short circuit setting type-01 Nos (b) Ammeter 0-600 Amps with CT rating and selector switch -01 Nos (c) Volt meter with selector switch 0-500 volt-01 Nos
(d) Indicating lamp(RYB)-01 set
Out going :-
(a) MCCB TPN 125 Amps, 35 KA, 415 Volts, Ics=100% Icu, Adjustable short circuit setting type-03 Nos (b) MCCB TPN 63 Amps, 35 KA, 415 Volts, Ics=100% Icu, Adjustable short circuit setting type-05 Nos (c) MCB TPN 32 Amps, 16 KA, 415 Volts-01 Nos (d) Three Phase nature switch 12 KW, automatic switching on / off street light based on lux level of nature light, consisting of sensor, overload protection fuse gear, power contactor and MCB of suitable capacity, terminal blocks for cable entry & control unit enclosed in pole / wall mountable enclosure made out of rust proof, shock proof, termite proof FR grade SMC, conforming to IP 54, with universal lock and key arrangement complete all as specified and as directed- 01 Nos Make of nature switch : Awadeep/ L & T / havells / Hanger Note : Drawing of LT panel shall be submitted by the contractor duly showing the size and dimention of MCCBs/MCBs and Bus Bar and should be got duly approved by Engr In charge before execution at site. | 4 | Each Job | 1,75,000 ₹7,00,000 | 1,99,000 ₹7,96,000 | 2,20,000 ₹8,80,000 | 2,54,000 ₹10,16,000 | 2,25,000 ₹9,00,000 | 1,29,650 ₹5,18,600 Lowest | 2,12,500 ₹8,50,000 | 2,28,500 ₹9,14,000 | 1,90,000 ₹7,60,000 |
| 4.00 | Supply, Installation, testing and commissioning of LT out door type panel board of suitable size factory assembled and fabricated(CPRI approved) and of suitable size and angle iron channel and MS sheet 3 mm to 3.15 mm thick (Inner compartment is 2.0mm thick) double door type, front and rear openable with locking arrangement duly powder coated, painted with metallic paint of approved clour, and independely housing for each control switch gear duly pre wired with clour coding for three phases and neutral, aluminum bus bar 600 Amps for 415 volts, 50 Hz electric supply with and including suitable sizes of cable glands for incomming and outgoing cables,grouting the panel boardon suitablePCC foundation , structure made out of equal angle iron of size 50x50x6 mm complete with the following switch gears/accessories:- Makes: L & T / ABB / Schneider / Legrard/ havells / C & S Electric
Incomming:-
Incomming:-
(a) MCCB TPN 400 Amps, 50 KA, 415 Volts, Ics=100% Icu, Adjustable short circuit setting type-01 Nos
(b) Ammeter 0-600 Amps with CT rating and selector switch -01 Nos
(c) Volt meter with selector switch 0-500 volt-01 Nos
(d) Indicating lamp(RYB)-01 set
Out going :-
(a) MCCB TPN 125 Amps, 35 KA, 415 Volts, Ics=100% Icu, Adjustable short circuit setting type-04 Nos
(b) MCCB TPN 63 Amps, 35 KA, 415 Volts, Ics=100% Icu, Adjustable short circuit setting type-04 Nos
(c) MCB TPN 32 Amps, 16 KA, 415 Volts-02 Nos
Note : Drawing of LT panel shall be submitted showing the size and dimention of MCCBs/MCBs and BUS BARs and get approved before execution at site. Note : Drawing of LT panel shall be submitted by the contractor duly showing the size and dimention of MCCBs/MCBs and Bus Bar and should be got duly approved by Engr In charge before execution at site. | 1 | Each Job | 1,55,000 ₹1,55,000 | 2,00,000 ₹2,00,000 | 2,30,000 ₹2,30,000 | 2,50,000 ₹2,50,000 | 2,20,000 ₹2,20,000 | 1,30,000 ₹1,30,000 Lowest | 2,03,000 ₹2,03,000 | 2,20,700 ₹2,20,700 | 2,05,000 ₹2,05,000 |
| 5.00 | Supplying, laying ,fixing,jointing and testing of LT under ground XLPE insulated , galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 95 sqmm x3.5 core IS 7098 marked with electric connection, lugs/in GI pipes incl connection to LT panels with gland all as specified and as directed.
Note: Excavation,earth work,sand cushioning, PCC cover and GI pipe shall be measured and paid seperately. | 190 | RM | 620 ₹1,17,800 | 650 ₹1,23,500 | 600 ₹1,14,000 | 595 ₹1,13,050 | 555 ₹1,05,450 | 860 ₹1,63,400 | 692 ₹1,31,480 | 680 ₹1,29,200 | 290 ₹55,100 Lowest |
| 6.00 | Description all as per ser item No 5.00 above but of size 35 sqmm x 3.5 core. | 110 | RM | 294 ₹32,340 | 288 ₹31,680 | 350 ₹38,500 | 265 ₹29,150 | 290 ₹31,900 | 330 ₹36,300 | 297 ₹32,670 | 290 ₹31,900 | 220 ₹24,200 Lowest |
| 7.00 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes etc. and getting out all excavated material in any type of soil complete all as specified and directed. | 59 | CUM | 120 ₹7,080 | 110 ₹6,490 | 90 ₹5,310 Lowest | 160 ₹9,440 | 120 ₹7,080 | 200 ₹11,800 | 200 ₹11,800 | 100 ₹5,900 | 190 ₹11,210 |
| 8.00 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. | 35 | CUM | 100 ₹3,500 | 38 ₹1,330 | 30 ₹1,050 Lowest | 80 ₹2,800 | 38 ₹1,330 | 50 ₹1,750 | 30 ₹1,050 Lowest | 30 ₹1,050 Lowest | 85 ₹2,975 |
| 9.00 | Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. | 24 | Cum | 100 ₹2,400 | 38 ₹912 | 30 ₹720 Lowest | 80 ₹1,920 | 38 ₹912 | 50 ₹1,200 | 30 ₹720 Lowest | 30 ₹720 Lowest | 45 ₹1,080 |
| 10.00 | M&L of locally available river sand in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed.
Note - Punned thickness shall only be measured and paid. | 20 | Cum | 1,500 ₹30,000 | 800 ₹16,000 | 700 ₹14,000 | 1,100 ₹22,000 | 676 ₹13,520 | 600 ₹12,000 Lowest | 600 ₹12,000 Lowest | 750 ₹15,000 | 790 ₹15,800 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
19 Aug 2025, 6:00 pmClosed
GE AWC MHOW
GE AWC MHOW
SPL REPAIRS REPLACEMENT OF BER CEILING FANS AND OLD ELECTRIC PANELS UNDER GE (AWC) MHOW
2025_MES_721623_1
8849/(AWC) /MHOW / OF 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE AWC MHOW
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AWC MHOW
₹60,000
30 Sept 2025
21 Jul 2025
21 Aug 2025
21 Jul 2025
19 Aug 2025
5 Aug 2025
Amount
Taking down of old unserviceable LT panel board complete with all fittings and accessories of any capacity incl disconnecting all incoming and out going connections by removing cable glands , lugs, nut bolt and washers incl breaking of PCC for removing MS angle iron any size removing the loop of cables carefully complete all as specified and directed. Note: (a) Necesssary shut down shall be taken in writing before disconnecting all cables. (b) M&L for Arrangement of Alternative/Bypass supply with all protective measures to the living accn shall deemed to be included in the quoted rates.
Supplying, laying ,fixing,jointing and testing of LT under ground XLPE insulated , galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 95 sqmm x3.5 core IS 7098 marked with electric connection, lugs/in GI pipes incl connection to LT panels with gland all as specified and as directed. Note: Excavation,earth work,sand cushioning, PCC cover and GI pipe shall be measured and paid seperately.
Description all as per ser item No 5.00 above but of size 35 sqmm x 3.5 core.
Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes etc. and getting out all excavated material in any type of soil complete all as specified and directed.
Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.
Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
M&L of locally available river sand in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.
Supply and laying unreinforced PCC Cable protection cover, class LV, type-1 flat with size 250 x 150 x 40 mm laid flat width wise complete all as specified and directed.
Supply and laying GI pipe light grade 50 mm in trenches, under floors,roads,along poles for protection of cable with all necessary fittings and sealing ends complete all as specified and as directed.
Dismantling/Taking out old unserviceable earthing any type/size complete all as specified and directed.
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate no. 3 of SSR Part - 1, connected to earthing test point and complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) earth chamber, RCC 1:1.5:3, type A-1 cover slab, 40 mm thick reinforced with 6 mm dia TMT bar @ 150 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc. (b) GI earth strip and GI protection pipe upto 7.5 mtr from under pole is deemed to be included in quated rates.
Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.
S & F for ceiling fan, 230 Volts, 1200 mm sweep with minimum air delivery 210 CFM, service value of the fan shall be greater than 8 as per BIS with blades, down rod & other necessary accessories with brushless direct current motor (BLDC) with remote system and electrical connections from ceiling rose to fan terminal including writing the MES Number with synthetic enamel paint complete all as specified and as directed.
S & F for ceiling fan (including regulator as applicable), 230 Volts, 1200 mm sweep with minimum air delivery 210 CFM, service value of the fan shall be greater than 8 as per BIS with blades, down rod, regulator & other necessary accessories with brushless direct current motor (BLDC) without remote system and electrical connections from ceiling rose to fan terminal including writing the MES Number with synthetic enamel paint complete all as specified and as directed. Note : (a) Regulator should be provided as per OEM recommendation and working with all steps properly. (b) Quoted rates of contractor should deemed to include regulator price too
MODI CORPORATION (BID ID -3399244)
sanjay traders (BID ID -3389730)
AGARWAL BUILDERS (BID ID -3390262)
M/s Navansh Engineers & Consultants (BID ID -3398887)
Auto Traders (BID ID -3395569)
Vinayak Trading House (BID ID -3399388)
Ms Kailash Chandra Babulal (BID ID -3390972)
M/s Gupta Constructions (BID ID -3391207)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .