Renovation Work of Dhunjiboy Academic and Research Centre at RINPAS, Kanke, Ranchi

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing cleaning the surface after cleaning removing dirt scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Finishing wall with textured exterior paint of required shade: old work(Two or more coats on existing cement paint surface applied @ 3.28ltr/10sqm

Finishing wall with textured exterior paint of required shade: New work(Two or more coats applied @ 3.38 ltr/.10sqm) over and including priming coat of exterior primer applied @ 2.20kg/10sqmm including all compelte job as per direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over old surface including washing cleaning and papering the walls, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt, rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With brass cover plate minimum 1.25 mm thickness

Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with dash fasteners of required dia and size including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and paneling and dash fasteners to be paid for separately) for fixed proper Anodised aluminium (anodised transparent or dyed to requireid shade according to IS:1868,Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm)

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595 mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600 mm centre to centre in a floor and ceiling channel section of size 50 x 32 mm fixed to the floor and soffit at 600 mm centre using 12 mm dia,50 mm long wedge type expanded zinc alloy dash fastner with 10 mm bolt. This same channel is then to be fixed in horiziontal direction at 600 mm centre to centre so as to form a grid of 600 mm x 600 mm. Glasswool of 50 mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2 mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50 mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer’s specification as per direction of Engineer-in-Charge all complete.

With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/ black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size- Size of Tile 600 x 1200 mm

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With commercial grade colour Tiles.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/Ruby red - area of Slab upto 0.50 Sqm

Dismantlingtile work in floors and roofs laid in cement mortar including stacking material with in 50 metres lead for thickness of tiles 10mm to 25mm including all complete job as per direction of E/I.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design :

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufac

turer of membrane :3 mm thick

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing 19mm thick water proof cement plaster(1:3)with clean coarse Isand F.M 1.5with integral water proofing compound liquid @125ml per bag cement including screening,curing with all leads and lift of water ,scaffolding taxes and royalty all complete as per building specification and direction of E/I. Brand-Fosroc-conplastX421C Sika-plastocrate plush, Dr fixit pidiproof LW+,MYK proof WP 10 or Equivalent.

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 0x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 sides tapered and backed by acoustical tissue with NRC value not less than 0.60

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

75mm dia

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

single tee with door 110x110x100mm

Single tee without door 110x110x100mm

Bend 87.5° 110mm

Coupler 110mm dia

shoe(plain)110mm dia

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4(1cement:4 coarse sand) and making good the wall etc.complete.

110mm diameter

110mm dia

Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l

(a) 25 mm dia wt not less than 500 gms

(d) 32mm dia and weight not less than 700gms.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible Pipe - 40 mm

Providing and fixing PTMT grating of approved quality and colour

Rectangular type with openable circular lid - 150 mm nominal size square 100 mm diameter of the inner hinged round grating

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

25mm nominal outer dia pipes

32mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc

15mm nominal outer dia pipes

20mm dianominal outer dia pipes

S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required

18/20W LED Round Down light

6W COB based round LED light with multiple bem angles (36 Degree)

S/F of following size exhaust fan including cutting the wall and fixing exaust fan etc as read.Baiai/Orient/Ortem or eqvl- 12" Sweep

ITC exhaust fan upto 450mm sweep Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc. as required.

Extra for cleaning

the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: New work (two or more coats applied @ 1.43ltr/10sqmm over and including priming coat of exterior primer applied @ 0.90litre/10sqm))

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M. (1:6) insupertructure with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500( onle valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I.

(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Stone Metal 20 km lead

Fly Ash brick lead 8K.M(1K+7P)

Supplying & Fixing Supplying & Fixing PRIDE Two Way Valve Chrome Plated Alloy Steel 15 15 15 PRIDE (CP Bib Cock 2 in 1) Product id: 5116877-46224966212

Supplying & Fixing Jaquar Leaded Tin Bronze Pillar Taps Jaquar (JAQUAR 15MM), Product id: 5116877- 79233252883, Material of Body , Body Components, Capstan Head and Leaded Tin Bronze Washer, Material of Spindle, Gland,Washer Plate and Nut, brass rod(extruded and rolled), Minimum Finish Mass - 650 gm for 15 mm Nominal Size Pillar Tape, Anti Splash Device fitted - No, Nominal Size (mm) - 15 ISI marked - Yes

Supplying & Fixing PRAYAG Clamp Support and Holes with Screws and Back Support Rectangular Mirror PRAYAGR (CAT NO. PTA-50 (Mirror Cabinet 622 X 422mm)), Product id: 5116877-85696578361, Mirror Shape Rectangular Frame Without Frame Material Plastic Fixing Arrangement of mirror Clamp Support ,Holes with Screws ,Back Support Special Feature NA Width for Rectanguler, Diameter for Round, Edge for Square (inch) 5.1-7.5 Height/Length of Mirror for Rectangular/ Oval (inch) 5.1-7.5 Thickness of Mirror (mm) 3.5-4 Mirror Shape Rectangular Frame Without Frame Material Plastic Weight (Kg) 3.5 Frame Color NA Corners of Mirror Edged Fixing Arrangement of mirror Clamp Support,Holes with Screws,Back Support Fixing/ Fastening Kit included Yes

Supplying & Fixing PRIDE Bathroom Hand ShowerLeaded Brass Grade DCB-2 of IS1264/1997 PRIDE (CP Health Faucet), Product id: 5116877-8222644844, Thickness of Ni-Cr coating : Not less than ServiceCondition Number 2 ofTable 3 of IS 1068/1993 Types of Shower : Hand Shower Material : Leaded Brass GradeDCB-2 of IS 1264/1997 Inlet Length of Shower Pipe(mm) : 150 millimeter Shower Diameter / Length(mm) : 100

Supplying & Fixing JVijay Waste Fittings For Size 32 mm for wash basin Vijay (BRASS WASHBASIN COUPLING), Product id: 5116877-98475055076, Material of Waste Fitting : Brass conforming toGrade 3 of IS 292/1961, Nominal Size : 32 mm for washbasin

Supplying & Fixing Parryware Vitreous China Sinks /Wash Basins Other Pattern and Rectangle Parryware (PARRYWARE), Product id: 5116877-5580405717

Supplying & Fixing HINDWARE Box Rim Type European Pattern Toilet Seat HINDWARER (CERA), Product id: 5116877-92860162985 Conformity to Indian Standard IS:2556 (Part-2) Latest Colour of Toilet Seat Ivory Colour of Plastic Seat cover with Lid Ivory Non Corrosive Non Rusting Hinges No Anti Siphonage Vent Horn No Pattern as per IS 2556 part 2 Pattern 2 with S-Trap Flushing Rim Type Box Rim Type

Supplying & Fixing Jaquar 15 mm Brass (Extruded, Rolled, Cast, die cast) Stop valve(internally Threaded) JaquarR (Jaquar OPAL Prime Angular Stop Cock with wall flange OPP-15053PM)

,Product id: 5116877 - 78146641534, Item - Bib Tap, Material of body and Bonnet Leaded in Tin Bronze Nominal Size (mm) 15, Finish - Nickel-Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993, Material of Gland,Crutch (handle), Washer Plate Leaded Tin, Bronze - Shape of Shoulder at the Bonnet - Square, Minimum Weight of Item (gram) - 250 gram Conform to Indian Standard IS:781 Latest - YES

Supplying & Fixing TECHNOCRATS HAND DRYER TECHNOCRATSR (TAS 0015), Product id: 5116877-94432266278, Type of Hand dryer, Automatic (Touch-Free Infrared Activation) Body Material - Stainless Steel, Mounting Type- Surface Mount, Style- of Hand dryer Hands Under, Length (cm) - 10-14, Height (cm) - 31-35, Width (cm)- 31-35, Hand Dry Time / Drying Time Range (sec) - 11-15

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)