Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹31.3 LAccepted-AOC | ₹31.3 L | 1 | Accepted-AOC ACCEPTED |
| 2 | 2₹31.7 LRejected-AOC PLOT NO 58 SUNDARAM NAGAR 3RD STREET THOOTHUKUDI | ₹31.7 L | 2 | Rejected-AOC REJECTED |
| Sl No | Description | Qty | Unit | SR CONSTRUCTIONS L1 | IJ Constructions L2 |
|---|---|---|---|---|---|
| 1.00 | Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. | 34 | 1M3(One cubic metre) | 269 ₹9,146 | 280 ₹9,520 |
| 2.00 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means | 9 | 1M3(One cubic metre) | 5,541 ₹49,869 | 5,541 ₹49,869 |
| 3.00 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard
specification and as directed by the departmental officers.(Contractor has to make his
own arrangements for the supply of steel reinforcement and binding wire) | 2,070 | 1Kg(one kilogram) | 92 ₹1.9 L | 98 ₹2.0 L |
| 4.00 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). | 84 | 1M2(One Square metre) | 709 ₹59,556 | 710 ₹59,640 |
| 5.00 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). | 5 | 1M2(One Square metre) | 645 ₹3,225 | 650 ₹3,250 |
| 6.00 | Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). | 102 | 1M2(One Square metre) | 974 ₹99,348 | 980 ₹99,960 |
| 7.00 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means | 16 | 1M3(One cubic metre) | 6,703 ₹1.1 L | 6,710 ₹1.1 L |
| 8.00 | Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers. | 344 | 1M3(One cubic metre) | 160 ₹55,040 | 170 ₹58,480 |
| 9.00 | Removing and Relaying of existing interlocking Paver block high strength type conforming IS 15658-2006 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,removing sweeping tranporting loading unloading of laying paver block as per standard specification,. | 242 | 1M2(One Square metre) | 490 ₹1.2 L | 500 ₹1.2 L |
| 10.00 | Supplying Rubberised interlocking Paver block M35 grade of 63mm thick high strength type conforming IS 15658- 2006 of rubberized interlocking paver lock in size of minimum compressive strength of 35 N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top | 49 | 1M2(One Square metre) | 1,470 ₹72,030 | 1,500 ₹73,500 |
Tender Value
₹40 L
EMD Value
₹40,000
Closing Date
2 Jan 2026, 3:00 pmClosed
COMMISSIONER
113 Thamilzh Salai(Palai Road) Thoothukudi Corporation
Construction of GYM Building and Indoor Outdoor Gym Equipment At StMarys Colony in Thoothukudi City Municipal Corporation
2025_MAWS_635956_1
183/25-26/AEE(N)
Open Tender
Civil Works
90 days
THOOTHUKUDI CORPORATION
Refer Technical Bid
2 documents required · 2 mandatory
₹0
₹40,000
19 Jan 2026
24 Dec 2025
2 Jan 2026
24 Dec 2025
2 Jan 2026
31 Dec 2025
Amount
Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).
Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means
Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers.
Removing and Relaying of existing interlocking Paver block high strength type conforming IS 15658-2006 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,removing sweeping tranporting loading unloading of laying paver block as per standard specification,.
Supplying Rubberised interlocking Paver block M35 grade of 63mm thick high strength type conforming IS 15658- 2006 of rubberized interlocking paver lock in size of minimum compressive strength of 35 N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top
Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
a) Upto basement level
b) For Ground Floor
Brick work in following Cement Mortar using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge
a) Upto Basement Level
b) For Ground Floor
Supply and filling in foundation and basement with Well Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.on.
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)Dadooing with white glazed tiles of size 150mm x 150mm x 6mm
Stainless Steel (Salem Stainless Steel) Door Frame - Box Section using Stainless Steel Plate with following thickness with the size of 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc including dismantling,making necessary chipping and holes in RCC columns, walls with power drills to the extent required ,including providing concrete 1:2:4 inside the box curing etc complete complying with standard specification and as directed by the departmental officers - SS Door Frame with thickness of 1mm/1.60mm.
Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick., of sizes specified by Engineers
Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Window of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated FRLS SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil)
Wiring with 2x1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipeon wall and ceiling with M.S.accessories inflush with wall with 150mm x 100mm x 75mm MS switchbox with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point. (
Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed In wall and ceiling with M.S.accessories in flush with wall with 150mm x 100mm x 75mm MS switch box concealed type with 3mm thick hylum sheet cover for 15A 3 pin flush type non interlocking C.S.plug with continuous earth wire connection of 14SWG TC wire and rnaking good of the concealed portion with suitable colour for concealed power plug point
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.
Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. (
Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18") (
Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .
Supply and Delivery of Vaccum Cleaner, the rate includes all cost and conveyance labour charges, transportation, fuel etc Complete
Fabricate and Delivery of Wooden Rack with Locker Facility of Size 8' x 6' with capacity of 30 Nos of Locker with Standard Specification, the rate includes all cost and conveyance labour charges, transportation, fuel etc Complete
Supply, Delivery and Installation of 12 Litres Capacity of RO Water Purifier with Standard Specification, the rate includes all cost and conveyance labour charges, transportation, fuel etc Complete
Supply, Delivery and Fixing of 10mm GYM Floor Rubber Matt of Size 480 x 480mm with Standard Specification, the rate includes all cost and conveyance labour charges, transportation, fuel etc Complete
Supply and delivery of Commercial Treadmill having a following specification 3HP Motor,Lower A/C Noise,Controller :JIWEI Inverter ,Max HP :7.0 HP,Speed :1-20 KM ,Inline :0-20%,Assembly size:2100*960*1530MM,Net gross:203 KG ,Gross weight:255KG the rate including all cost and coneyance of labour charges etc completed
Supply and delivery of SPIN BIKE -BLACK having a following specification Handle bar :Dipping,Handlebar,Vertically Adjustable,Aluminium post,Console:without console,Brake:Magnetic Resistance with emergency brake,Fly wheel:Aluminium Flywheel,Drive system:Two way Belt drive,Smoothly,CRANK:3 Pcs commercial use Aluminium pedals(JD-304),Saddle:High Quality PU Saddle,Vertically&Horizontally Adjustable,Max user weight:150 KG the rate including all cost and coneyance of labour charges etc completed
Supply and delivery of Combined Seated Leg Curl and Leg extension having a following specification Dinension : 1834*1102*1310MM, Machine weight 226.6KG,WEIGHT STACK:100KG and weight: 130KG, Machine size: 1486MM*1141MM*1310MM the rate including all cost and coneyance of labour charges etc completed
Supply and delivery of Multi GYM with Standard Specifications of 76 KG Weight Stack (15/4.8 KG + 1/3.8 Kg), Stainless steel frame constructed with 50x100mm tubes, Powder Coated Rust Free Framing, Cables are tested to bear 300kg tensile strength, Adjustable Incline/Decline Bench, Cushioned Seat with Sweat Proof Padded Foam, Foam grip handle for Chest Press & Shoulders, 50+ Full body exercises, PVC vinyl rubber coated weight stack, Multiple Leg exercises with calf raise system, To Movable pulley system, Lat Pull Bar, Silver Bar, Silver Strap, Ankle Strap, Punching Bag the rate including all cost and coneyance of labour charges etc completed
Supply and delivery of Smith machine having a following specification Dimension:1239 * 2224 * 2295MM,Machine weight:158KG the rate including all cost and coneyance of labour charges etc completed
Supply and delivery of FID Bench Frame: 50 x 100mm heavy-gauge rectangle tubing. Finish: High Quality electrostatic powder coat finish. A standard two-coat powder coating that's highly resistant to chips and scratches. Cushions: Durable high density cushion covered in stitched vinyl. Grips: Non-absorbing PVC compound retained with aluminium collars. Dimension(L*W*H):1448x635x508mm (57"x25"X20") Machine Weight: 40Kgs rate including all cost and coneyance of labour charges etc completed
Supply and delivery of Dumbbell Rack-ind make having a following specification Dumbbell Rack- IND make the rate including all cost and coneyance of labour charges etc completed
Supply and delivery of Rubber Dumbbells having a following specification Bouncer Dumbbells the rate including all cost and coneyance of labour charges etc completed
2.5 Kg Rubber Dumbell Set
5 Kg Rubber Dumbell Set
10 Kg Rubber Dumbell Set
12.5 Kg Rubber Dumbell Set
15 Kg Rubber Dumbell Set
Supply and delivery of Vinyl Kettlebell having a following specification Bouncer Dumbbells the rate including all cost and coneyance of labour charges etc completed
2kg/Vinyl Kettlebell
4kg/Vinyl Kettlebell
6kg/Vinyl Kettlebell
8kg/Vinyl Kettlebell
Supply and delivery of OLYMPIC ROD 50MM PLAIN -4 Feet having a following specification Olympic Plain ROD -50MM -4 Feet the rate including all cost and coneyance of labour charges etc completed
Supply and delivery of VINYL DUMBBELLS 1 KG having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of VINYL DUMBBELLS 1.5 KG having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of VINYL DUMBBELLS 2 KG having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of VINYL DUMBBELLS 3 KG having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of Aerobic Step having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of GYM Ball having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of Rubber Plates of Weight Pairs 2.5 Kg having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of Rubber Plates of Weight Pairs 5 Kg having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of Rubber Plates of Weight Pairs 10 Kg having a following specification the rate including all cost and conveyance of labour charges etc completed…..
Supply and delivery of Medicine Balls having a following specification the rate including all cost and conveyance of labour charges etc completed….. 1KG
Supply and delivery of Medicine Balls having a following specification the rate including all cost and conveyance of labour charges etc completed….. 2KG
Supply and delivery of Medicine Balls having a following specification the rate including all cost and conveyance of labour charges etc completed…..3KG
SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL (1.5 TR Split Type AC Unit - 5 Star Rated) the rate includes all cost and conveyance, labour charges, transportation, etc complete
Supply and Delivery of 200KG Capacity Weigh Scale with Standard Specifications, the rate includes all cost and conveyance labour charges, transportation, fuel etc Complete
Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Fabricating and Installation of Mirror sticking over 10mm Plywood and reeper on alround Edge with Standard Specification, the rate includes all cost and conveyance labour charges, transportation, fuel etc Complete
Supply and Fixing of Seating Arrangement Supplying and fixing fine Granite stone bench the size of (1.5m length – 0.60m width) including cost of conveyance all materials and charges for fixing etc., complete. 3 Seater granite bench
Supply and fixing of Bison door including all cost of conveyance charges etc., complete as per standared specification.
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
Supplying, laying and jointing PVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply Above ground level.
20mm dia PVC Pipe(10 kg. / sq.cm)
25mm dia PVC Pipe(10 kg. / sq.cm)
63mm dia PVC Pipe(6 kg/sq.cm)
110mm dia PVC Pipe(6 kg/sq.cm)
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
"Supply, Fixing & commissioning of Pop up spray RD 1804 SAM PRS Series Spray bodies with high efficiency HE VAN Nozzle capable of covering radius of 0.9-4.6m at 1.0 - 2.1 Bars, pressure with Matched precipitation rate, tactile click and DU > 0.7. Triple Blade Wiper Seal precisely balances flushing, flow- by and debris protection to optimize performance and durability at popup and retraction. Precision-controlled flushing at pop-up and retraction clears debris, ensuring positive stem retraction in all soil types. Unique debris pockets hold grit in place, removing it from circulation and preventing long-term damage. Parts resistant to corrosion in treated recycled water containing chlorine. Pop spray body shall with stand upto 6.9 bar. Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressures. etc., RD1804- SAM PRS-HE VAN incl installation charges."
Providing, fixing, Testing & Commissioningof PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 20 mm ( 3/4 " ) with Standard Sepecification, the rate incldues all cost and conveyence of materials and labour charges etc,., complete
Supply of Gunmetal non return valve 2.0 " dia. (ISI) with Standard Sepecification, the rate incldues all cost and conveyence of materials and labour charges etc,., complete
Supply of 6"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. with Standard Sepecification, the rate incldues all cost and conveyence of materials and labour charges etc,., complete
Supply and fixing of brass cable gland for 2 x 6 sq.mm. PVC LTUG armoured cable with earth connection including all cost and conveyance of material and labour charges etc complete., SD-159
Supply and fixing of 4MP IP Bullet / Dome Camera. CCTV CAMERA WITH POE, WDR, Built In MIC including all cost and conveyance of material and labour charges etc complete., M-2806
Supply and fixing of 8 port PoE SWITCHES FOR CCTV IP CAMERA - HIGHER END including all cost and conveyance of material and labour charges etc complete.,
Supply and fixing of 2TB HARD DISK FOR NVR - HIGHER END including all cost and conveyance of material and labour charges etc complete.,
Supply and fixing of CAT 6A UTP Armoured Cable including all cost and conveyance of material and labour charges etc complete.,
Supply and fixing of NETWORk VIDEO RECORDER FOR CCTV HIGHER END. including all cost and conveyance of material and labour charges etc complete.,
Supply and turffing of Korean grass / mexican grass for 45 Sq Ft including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in- charge.
Supply and filling of good quality Garden soil in the ratio of 2:2:1 of good quality existing earth, mixed with Red soil, FYM with all bio organic fertiliserorganic pesticides, fungicides, nutrients and plant growth regulators, etc.
Mixing charges of Red soil, sand and manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost)”
Spreading of red soil, gravel or sand including watering and rolling with hand roller for every 75 mm thichness including hire cahrges of roller (excluding material cost)”
IJ Constructions (BID ID -1551840)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.62 MB
Bid4000.pdf
Tender Documents • 0.98 MB
BOQ_761065.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid