SPL REPAIR TO BUILDING NUMBER P-40 AT PATIALA MIL STATION

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for cement plastering 15mm thick in cemet mortar 1:4 brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement as directed complete all as specified.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on celings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls / soffits and applying two coats of exterior emulsion paint over a coat of primer including acrylick thick wall care putty for smootness of surface, complete all as specified and directed.

M&L for preparation of new surface of wall and applying 02 coats of interior oil bound distemper (light shade) by using roller to wall surfaces over & including a coat of interior wall primer coat as recommended for under coat by manufacturer of interior emulsion and primer including acrylick thick wall care 1mm thick putty for smoothness of surface, complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder machine complete all as specified and directed.

M&L for preparation of treated surfaces of walls / soffits and applying two coats of oil bound distemper paint over a coat of primer including acrylick thick wall care putty 1mm thick for smoothness of surface, complete all as specified and directed.

M&L for Preparation of New surface and applying 02 coats of interior oil bound distemper (white shade) to ceiling surfaces over & including a coat of interior wall primer coat as recommended for under coat by manufacturer of interior emulsion and primer of surface complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100 mm X 65 mm size, applying PVC solvent cement and screwed with full body threaded, star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge.

S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 18 mm thick plywood BWR type BB, fixed with screws to timber frame work complete all as specified and directed.

S&F 30 mm thick factory made flush shutter, solid core construction ,with block board core and plywood face panels , commercial type on both faces including teak wood beading 6mm thick all around, complete all as specified.

M&L for 1 to 2 mm thick decorative laminate teak wood plywood type 1, of surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer instructions etc., complete all as specified.

M&L for PU Polish using a polyurethane based coating to provide a durable,glossy and elegant finish to wooden surfaces all as specified and directed.

S&F 10- 12mm thick toughned tinted glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including all necessary fittings (patches, connectors, brackets etc) all as specified and directed

S&F tinted sheet glass ordinary quality 4mm thick area n.exc 0.50 sqm each.

S&F for powder coated (minimum thickness of coating 50 micron) aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and 1.40mm avg width of apreture.

S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed

S&F stainless steel (304 grade) finished butt hinges 100mm complete all as specified and directed

S&F brass, barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed in repair 200 mm complete all as specified.

S&F extruded Brass handles, fabricated type polished 150 mm complete all as specified.

M&L for 250mm long Brass, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

M&L for 8 to 10 mm anti-skid premium quality coloured tiles area of each tile exc 0.42 spm but n exc 1 sqm, as in floors etc. in any pattern shede light & dark tiles as approved, set and jointed in Epoxy Cartridge tile Grout using fill the joint of tiles complete, in floors etc. over & including 15 mm thick screed in cement mortar (1:4) over and pointed including all as specified.Note- Epoxy Black,Golden Colour.

M&L for 8-to 10mm Vitrified tile glossy finish, premium quality coloured tiles 600 X 1200 mm and , in any pattern of light & dark/highlighters es etc as approved, on vertical surfaces, and over & including 10 mm thick rendering in mortar (1:4) complete all as specified.

S&F for narrow Golden strip size (10mm to 12mm )used in decorative band in wall tiles,horizontal bands,border trims aur full accent wall complete all as specified.

M&L for Vitrified light (Non-skid) shade tiles 8 - 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15 mm thick screed in cement mortar (1:4) complete all as specified.

M&L for machine cut kota stone slab as in flooring/Skirting of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry laid over 20 mm th screed in CM 1:4 including cutting, rubbing and polishing complete all as specified Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M & L for 12 - 14 mm thick Artificial Granite (of any type) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes CM (1:4) complete all as specified.

S&F in repair Stainless steel curtain rod of 20 mm inner dia (in lengths as directed) of & including decorative finial at both ends and pair of S S steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, (Victorian design)all as specified & as directed. Make -Vista, sample are avaible in the office for checking and quoting the same

S&F vitreous china rimless single piece WC of Size: 385x720x710 mm, Single Piece WC with PP Soft close Seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, S trap-300mm complete all as specified and directed Make Jaquar cat part No ONS-WHT-10853P300UFSM or equivalent in kohlar, grohe and Roca

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca

S&F Repair decorative type WHB Vanity floor mounted made out of coloured PVC board of size 900x600/900 complete all specified and approved by GE Make: Cat part No. TRIUMPH of Somany or Equivalent in Hindware/Parryware/Cera

S & F in repair 15 mm bore, fancy type, bib taps, chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No QQT-7037 of Jaquar or equivalent in kohlar, grohe and Roca

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No QQT-7053 of Jaquar or equivalent in kohlar, grohe and Roca

S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed. Make : Prayag /Sintex/Shakti

S&F in repair healthfaucet with 1mtr long easy flex tube in chrome Finish and wall hook of 15 mm bore with CP pipe complete set of make -Jaquar cat part No ALD - 565 as equivalent, parryware/Prayag

S & F in repair CP, soap dish holder complete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731P or equivalent in kohlar, grohe and Roca

S&F sheet glass corner shelf wall mounted shelf assembly consisting of 5mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. Cat Part no CAN -1173 of jaquar or equivenet in Kohlar, grohe and Roca

S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed Make Jaguar (Cat Part No: AHS-1581H) or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated Central Hole Basin Mixer single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: QQT-7167B or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: QQT- 7041 or equivalent in kohlar, grohe and Roca

S&F in repair Soap Dispenser with glass bottle (stainless steel) all as specified. Make- Jaquar Cat Part No AKP -35735P as equivalent /Hindware/kohlar

S&F in Double Arm wall mounted reversible plain/Magnifying (X3) pivotal Mirror all as specified. Jaquar Cat Part No ACN -1193N as per equivalent /Hindware/Kohlar

S&F in repair toilet Roll holder stainless steel flap all as specified. Make- Jaquar Cat Part No CAN-1153S as per equivalent /Hindware/Kohlar

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 15mm bore fittings.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified.

S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 20mm bore fittings.

S&F in repair looking mirror 5mm thick size 3x3 feet incl stud and finishing all as specified.

S&F in repair doubled layered rotational moulded polyethylene (White colour)water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm PVC brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm GI bore to connect to PVC tank complete all as specified.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F in repair stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .

M&L for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified.

M&L for Providing 25 mm dia CPVC pipe medium grade spouts 60 cm long complete all as specified and directed.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 all as specified

S&F in repair PVC(SWR) , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged CI rain water pipe complete all as specified and as directed.

S & F in repair for PVC (SWR) bends/tees of any radius for 110mm bore with access door as complete all as specified.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall and floor complete all as specified and as directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall and floor complete all as specified and as directed.

S&F for PVC(SWR) bend any radius tyes of 110mm bore with ducks for or head rest.

S&F for PVC(SWR) branch pieces single equal or unequal ordinary or inverted or with paralled brnach 110 mm bore.

S&F 110 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F for PVC multi floor trap/nahani trap / with grating incl jointing with waste pipe in cement mortar of size 100mm.

S&F PVC (SWR)100 mm cowl.

S&F Salt glazed stone-ware gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' incl CI grating fixed in repair complete all as directed and specified.

M & L for Cutting grooves in brick/stone wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.

M& L for Cement concrete (1:3:6) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints, filled with polyurethane elastic adhesive/sealant (white/grey colour-sikaflex) of approx density 1.30kg/litre and form work complete all as directed by Engr-in-Charge and complete as specified.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with arreangement complete as specified and directed

M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggretgate, as in base /hardstanding etc complete all as specified and directed.

M&L 25mm thick factory made coloured interlocking designer polished floor tiles300x300mm (Ultra pattern) of Grade M-35 of shape and size as directed,and 100mm x 100mm size tiles piece on every joint of tiles flooring laid over & including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed . Note: Sample shall be got approved from GE before commencement of work

M & L for testo cappuccino solid rock size 230X140X80 mm thick rubber moulded , lacqured finished ,coloured machine pressed precast concrete interlocking of M-40 paver block colour shape and size conforming to IS 15658-2006 filled with pigment over sand cushioning 25 mm thick complete all as specified

Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior grade scratch resistance of size 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc set and including 15 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match complete all as specified.

Supplied and fixed for framed work as in doors or gates of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. to Fe-410-0 or Fe-310-0 all as specified and directed. Note : Distrubed surfaces of wall shall be made good to true surface.

M&L Cement screed bed/plaster on parapets/Roof 20mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on surface of roof etc finished even and fair and making strip of size 30 cm x 30 cm by complete including cleaning the surface and made for free of dirt foregin particles and applying 2 coats of Damp proof chemical over one coat of primer as per manufacturers instruction. (Make Asian,Berger and equivlent) Note- Rate for surface cleaning/Rubbing and made free from dirt etc included in this item. 2. Complete treatment to be done by manufacturer and bill to be submit before payment

Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.

S & F powder coated aluminum alloy (minimum thickness of Powder coating coating shall be 50 micron) interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 23mm x 23mm x 1.5mm and cross Tee of size 23mm x 23m x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified.

S&F 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

Complete removal of existing treatment including washing rubbing down and stopping of painted surfaces and applying 1-2 mm thick metallic texture painting (Top quality) on walls in any colour/shade/pattern/design including preperatory work for base by applying primer/putty coat by any authorised applicator complete all as specified and directed

S & F powder coated aluminium sections ( minimum thickness of coating 50 micron) for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

Dismantling of asbetos/fibre cement corrugated/semi corrugated sheet in roof covering including ‘J’ or ‘L’hooks complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note : Fixing of sheets will be done strictly according as per manufacurer's instructions.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

S&F MS work in tubular/pipe/angle sections for frame work for roof, vertical poles, s rafters and purlins including washer etc complete all as directed.

M&L for preparing steel and Iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge

Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge. Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item.

All as per Sl item No 98 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.

All as per Sl item No 98 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.

All as per item No. 98 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board.

S & F in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.

S & F in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified.

S & F in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.

S & F in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.

S & F in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified.

S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed

Supply and fix incl taking down antique look decorative surface mounted classic living room wall light with base cap B22/E27 body made with METAL and glossy GLASS having fitting capacity upto 20 watt. connection with twin core twisted flexible copper conductor cable .75X2 Sqmm with proper clamps complete all as specified and directed by Engr in Charge.

Supply and fix surface/recess mounted LED luminaire 36 watt warm white 4000-5000K suitable for gridd celling cutout dimensions: 2x2 Ft. incl connecting with twin core copper wire from ceiling rose to fitting, Fixture size: (LxWxH) in (595x595x65) mm incl lamp and driver all as specified & directed.

S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge.

S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body Warm White with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body Warm White with PC Diffuser in square LED Batten 9/10W 6500K of capacity ,10 watt,2 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

Supply and fix mirror light with linear & compact 12 W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and directed by Engr-in-charge.

S&F surface mounted Slim design LED round Downlight with Superior light output and internal driver 9/10 Watts 230 volts with internally pre-wired and including connecting up with two core twisted flexible copper conductor cable with suitable size compelte all as specified and directed by Engineer-in-Charge.

M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring.

S & F MCCB, 4 Pole, 125 A, 25 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge.

Supply and fix in replacement of epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed by Engr-in-charge.

S & F in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of MCB , SPN, 240 Volts ,40-63 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L in replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497.

XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete all as specified and directed.

Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Supply & fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louvers, making holes for exhaust fan 300 mm sweep, grouting nut-bolts and make surface good complete all as specified and directed by Engineer-in-Charge.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with MCB SPN 32 Amps, complete all as specified and as directed by Engineer-in-charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.