Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 LAccepted-AOC PADHUANPADA PROOF ROAD BALASORE ODISHA 756001 | BALESHWAR | ODISHA | 756001 | ₹44.5 L Quoted ₹44.6 L | L1 | Accepted-AOC Being Lowest |
| 2 | L2₹46.5 LRejected-Finance SIKONA CHANDIPUR BALASORE ORISSA 756025 | BALESHWAR | ODISHA | 756025 | ₹46.5 L | L2 | Rejected-Finance Not Being Lowest |
| 3 | L3₹47.2 LRejected-Finance AT SRIKONA PS CHANDIPUR DIST BALASORE ODISHA 756 025 | CHANDIPUR | BALASORE | ODISHA | 756025 | ₹47.2 L | L3 | Rejected-Finance Not Being Lowest |
| 4 | L4₹47.9 LRejected-Finance AT PO CHANDIPUR BALASORE 756025 | BALASORE | BALASORE | ODISHA | 756025 | ₹47.9 L | L4 | Rejected-Finance Not Being Lowest |
| 5 | L5₹48.7 LRejected-Finance GUDUPAHI CHANDIPUR BALASORE ODISHA 756025 | CHANDIPUR | BALASORE | ODISHA | 756025 | ₹48.7 L | L5 | Rejected-Finance Not Being Lowest |
| Sl No | Description | Qty | Unit | MS SUBHAM ENGINEERING AND CO L1 | M/s MANIK SETHI L5 | RANA ENTERPRISES L2 | M/s Manas Ranjan Bera L3 | DS ENTERPRISES L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | S & F in repair retro reflective Studs (Cats Eyes) of size (100 mm x 100 mm x 20 mm Approx.), on existing road surfaces, complete all as specified and directed by the Engineer-in-charge. | 110 | Each | 190 ₹20,900 | 265 ₹29,150 | 250 ₹27,500 | 215 ₹23,650 | 200 ₹22,000 |
| 2.00 | S&F in repair solar road stud LED based intelligent road studs of size 125x125x25mm made from aluminium alloy and construction. One high capacity NI-Cd rechargeable battery with view distance approximate 1000m, LEDs 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colour back up 12 hours of continuous lighting at night including fixing with epoxy screed bed all as per manufacturer direction or directed by Engr-in-Charge. | 50 | Each | 4,350 ₹2.2 L | 4,750 ₹2.4 L | 4,500 ₹2.3 L | 4,455 ₹2.2 L | 5,000 ₹2.5 L |
| 3.00 | M&L retro reflective thermo plastic road marking paint 2.50mm thick, uniform finish yellow/white in colour, applied by machine all as specified and conforming to BS 3262-1989 including cleaning of surface complete all as specified and directed . | 750 | Sqm | 650 ₹4.9 L | 985 ₹7.4 L | 720 ₹5.4 L | 725 ₹5.4 L | 800 ₹6 L |
| 4.00 | S&F in repair retro reflector 120 cm high road way delineator post block make of 16 gauge 2.5 inches dia round pipe two side reflective in white/yellow colour 7.5 cm x 10cm size strips 3 Nos ,fixed on ground over and including necessary brick work over PCC 1:1.5:3 (using 20mm graded aggregate) concrete foundation and necessary excavation and earth work and removal of spoil to a distance not exceeding 50m complete all as specified and directed . | 60 | Each | 8,000 ₹4.8 L | 9,120 ₹5.5 L | 8,800 ₹5.3 L | 8,620 ₹5.2 L | 8,800 ₹5.3 L |
| 5.00 | Supplying and fixing in repair Retro-reflective regulatory sign board of size 1200 x 1500 mm made out of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by GE . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to Stainless steel(SS) frame of 25mmX 25mm X 1.6mm square hollow section. The boards will be fixed with 50mm dia SS pipe of height 2100mm (From GL to top of sign board) and 600mm leg of 50mm dia SS pipe embedded below GL and filled with PCC (1:2:4) in post hole of size 450x450x600 mm including necessary excavation and removal of surplus soil away from site complete all as directed . | 12 | Each | 9,500 ₹1.1 L | 9,800 ₹1.2 L | 9,850 ₹1.2 L | 9,735 ₹1.2 L | 9,900 ₹1.2 L |
| 6.00 | M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.30 Kg/Sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for Road and Bridge works 2013, using mechanical sprayer complete all as specified and as directed | 500 | 10 Sqm | 745 ₹3.7 L | 850 ₹4.3 L | 700 ₹3.5 L | 825 ₹4.1 L | 800 ₹4 L |
| 7.00 | M&L for providing bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, with using paving bitumen VG-30 laid/spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and as directed by the Engineer-in-Charge. Note :- (i) Filling of any pot holes (coming in the area to be re-carpeted) in the above item not exc 30mm depth by material of premix asphaltic semi dense concrete is deemed to be included in the quoted rate. | 500 | 10 Sqm | 5,330 ₹26.6 L | 5,320 ₹26.6 L | 5,500 ₹27.5 L | 5,550 ₹27.8 L | 5,500 ₹27.5 L |
| 8.00 | M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-30, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed by Engineer in charge. | 14 | 10 sqm | 2,950 ₹41,300 | 3,100 ₹43,400 | 3,000 ₹42,000 | 3,156 ₹44,184 | 3,000 ₹42,000 |
| 9.00 | Supplying and fixing in repair Retroreflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. | 8 | Each | 7,800 ₹62,400 | 8,835 ₹70,680 | 8,900 ₹71,200 | 8,570 ₹68,560 | 9,800 ₹78,400 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
16 Apr 2026, 6:00 pmClosed
Garrison Engineer
GE (I) R and D Chandipur, Post-Chandipur, PIN-756025
REPAIR AND RESURFACING OF ROAD, ROAD FURNITURES INCLUDING CLEANING OF ROAD BERM AND FILLING TO POT HOLES ETC AT BALASORE NILGIRI
2026_MES_756286_1
8252/A/E8
Open Tender
Civil Works - Roads
180 days
Chandipur
As per Tender Documents
9 documents required · 9 mandatory
₹500
GE (I) R and D Chandipur
₹90,000
Yes
6 Jun 2026
14 Mar 2026
23 Apr 2026
14 Mar 2026
16 Apr 2026
6 Apr 2026
S & F in repair retro reflective Studs (Cats Eyes) of size (100 mm x 100 mm x 20 mm Approx.), on existing road surfaces, complete all as specified and directed by the Engineer-in-charge.
S&F in repair solar road stud LED based intelligent road studs of size 125x125x25mm made from aluminium alloy and construction. One high capacity NI-Cd rechargeable battery with view distance approximate 1000m, LEDs 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colour back up 12 hours of continuous lighting at night including fixing with epoxy screed bed all as per manufacturer direction or directed by Engr-in-Charge.
M&L retro reflective thermo plastic road marking paint 2.50mm thick, uniform finish yellow/white in colour, applied by machine all as specified and conforming to BS 3262-1989 including cleaning of surface complete all as specified and directed .
S&F in repair retro reflector 120 cm high road way delineator post block make of 16 gauge 2.5 inches dia round pipe two side reflective in white/yellow colour 7.5 cm x 10cm size strips 3 Nos ,fixed on ground over and including necessary brick work over PCC 1:1.5:3 (using 20mm graded aggregate) concrete foundation and necessary excavation and earth work and removal of spoil to a distance not exceeding 50m complete all as specified and directed .
Supplying and fixing in repair Retro-reflective regulatory sign board of size 1200 x 1500 mm made out of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by GE . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to Stainless steel(SS) frame of 25mmX 25mm X 1.6mm square hollow section. The boards will be fixed with 50mm dia SS pipe of height 2100mm (From GL to top of sign board) and 600mm leg of 50mm dia SS pipe embedded below GL and filled with PCC (1:2:4) in post hole of size 450x450x600 mm including necessary excavation and removal of surplus soil away from site complete all as directed .
M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.30 Kg/Sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for Road and Bridge works 2013, using mechanical sprayer complete all as specified and as directed
M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-30, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed by Engineer in charge.
Supplying and fixing in repair Retroreflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
BOQ_847135.xls
BOQ • 0.32 MB
Tender8252A.pdf
Tender Documents • 0.87 MB
Credit8252A.pdf
Additional Documents • 0.33 MB
Download all tender documents and submit your bid