REPAIR / MAINT LT UG CABLES, LT SWITCH GEARS, STREET PARAMETER LIGHTS AND OTHER CONNECTED WORKS IN PINTO PARK AREA AND BASANT NAGAR AREA AT AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT - 10

Amount

Disconnection of electric supply and taking out old unserviceable LT outdoor panel complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles & stay etc complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid, tested complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm) complete all as specified and as directed.

M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat complete all as specified and as directed.

M&L for augering of holes in true horizontal position under road /pavement by means of mechanical rig after doing ultrasound technique to prevent any damage to existing cables/pipe lines coming in route 1.5 Mtr deep and not exceeding 15 Mtrs long including laying HDPE pipe of 150mm dia complete all as specified and as directed.

Taking out old unserviceable LT under ground cable any type from trenches, pipes & poles complete all as specified and as directed.

Supply and laying in replacement of XLPE LT 1100 Volt Grade, armoured under ground cable of size 10 Sqmm 2 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and as directed.

Description all as per srl item No 9.00 above but 16 Sqmm 2 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 16 Sqmm 4 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 25 Sqmm 3.5 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 35 Sqmm 3.5 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 50 Sqmm 3.5 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 70 Sqmm 3.5 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 95 Sqmm 3.5 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 120 Sqmm 3.5 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 150 Sqmm 3.5 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 185 Sqmm 3.5 core complele all as specified and as directed.

Description all as per srl item No 9.00 above but 240 Sqmm 3.5 core complele all as specified and as directed. Notes for ser item No. 8.00 to 20.00:- Excavation, earth work and protection of cable shall be measured and paid seperately.

Dismantling concrete poles/steel tubular poles, struts of any size complete all as specified and as directed by Engineer-in-Charge.

M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-31 (09 Mtr long) with and including two coats of bituminous paint internally and externally for the portion embedded in concrete and two coats of aluminium paint over one coat of red oxide primer to external/exposed surfaces complete all as specified and as directed. Note:- Excavation, earth work and PCC shall be measured and paid separately under relevant items.

M&L for defect rectification LT cable laid in trenches by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. including and additional excavation in normal alluvial strata required for exposing the cable fault, removal of deteriorated portion of cable treating of cable and keeping the same ready for jointing work for cable of size up to 400 Sqmm 3.5 core. The fault locating equipments shall be brought to site within the hours of instructions from Engr-in-Charge

Supply & jointing heat shrinkable straight through joint kit suitable for LT 1100 Volt grade XLPE cable of size 240-150sqmm 3.5 core complete with treating of cable to make ready for jointing etc complete all as specified and as directed.

Description all as per item No. 24.00 here in before but suitable for cable size 70-95 sq mm complete all as specified and as directed.

Description all as per item No. 24.00 here in before but suitable for cable size 25-50 sq mm complete all as specified and as directed.

M&L for galvanised steel tube, light grade with all fitting complete laid in trenches/ road / Path/ on pole of 80 mm bore complete all as specified and as directed.

Description all as per srl item No 27.00 above but GI pipe of 100mm bore complete all as specified and directed.

Description all as per srl item No 27.00 above but GI pipe of 150mm bore complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundtion of PCC poles/struts complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in foundtion of pole/stay assembly etc including necessary use and waste of form work complete all as specified and as directed.

M&L for preparing existing old surface of steel tubular poles including cross arms and clamp of any type 09 Mtr long and painting one coat of aluminium paint on the surface of steel tubular pole, with white /blue 30 cm wide strip upto the height of 1.5 mtr above ground level and marking the pole No in 4” dia yellow paint complete all as specified and as directed.

M&L for painting to PCC pole with cross arms and clamp of any type and any size with a coat of synthetic enamel paint with white /blue 30 cm wide strip upto the height of 1.5 mtr above ground level and marking the pole No in 4” dia yellow paint circle complete all as specified and as directed.

Supply and fixing MCCB 400 Amps 4 pole 50 kA 415 Volts 50 Hz with thermal adjustable magnetic settings, necessary conection including taking out old existing unserviceable MCCB from panels etc complete all as specified and as directed.

Supply and fixing MCCB 200 Amps 4 pole 36 kA 415 Volts 50 Hz with thermal adjustable magnetic settings, necessary conection including taking out old existing unserviceable MCCB from panels etc complete all as specified and as directed.

Supply and fixing MCCB 160 Amps 4 pole 25 kA 415 Volts 50 Hz with thermal adjustable magnetic settings, necessary conection including taking out old existing unserviceable MCCB from panels etc complete all as specified and as directed.

Supply and fixing MCCB 125 Amps 4 pole 16 kA 415 Volts 50 Hz with thermal adjustable magnetic settings, necessary conection including taking out old existing unserviceable MCCB from panels etc complete all as specified and as directed.

M&L for earthing in replacement of with galvanized mild steel earth plate electrode (60cm x 60cm) x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI strip (32x6)mm as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) with fair finish internal surface of concrete, chamber shall be given 15mm thick plaster in CM (1:4), funnel with wire gauge mesh, 80 mm thick RCC pit cover (320mm x 320mm) of RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of GI strip protected by 40 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified & as directed by Engr-in-Charge.

M&L in replacement Junction box outdoor type, 3 phase 415 Volts of size (350x250x150)mm made out of hot press moulded SMC front openable hinged type including 4 Nos. Al bus bars mounted on insulators heavy duty of rating 32 Amps with necessary fixing arrangements to pole with MS calmps, nuts, bolts etc of size (25 x 4) mm duly painted with two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

S&F for LED post top lantern 20 W with die cast aluminium spigot, spun aluminium powder coated top cover aluminium PDC heat sink, opal PC diffuser and clear acrylic IP65 complete all as specified and as directed. Make-Halonix/Bajaj/Havells

S&F LED bollard with MS pipe housing with glare free PMMA diffuser, IP 65, 10W complete all as specified and as directed. Make-Halonix/Bajaj/Havells

M&L in replacement of PVC insulated service cable flat or round, sheathed, aluminium, multistranded conductor 1100V grade size 10 Sq mm 2 core complete all as specified and as directed.

S&F in replacement of analog type time switch 3P module, DIN 24 hours programmable every 30 minutes of current capacity 32 Amps with one change over including connecting to existing power contactor complete as specified and as directed.

S&F in replacement of analog type time switch 3P module, DIN 24 hours programmable every 30 minutes of current capacity 16 Amps with one change over including connecting to existing power contactor complete as specified and as directed.

Taking down unserviceable Perimeter/street/security light fittings complete (LED) from the pole/tower/bldg etc for repair and re-fixing the same back to its original position after made the fitting serviceable complete all as specified and as directed by Engr-in-Charge. Note :- The cost of spares like LED driver etc required for making the fitting serviceable shall be measured and paid separately under relevant items of BOQ.

Supply and fixing in replacement of Exclusive innovative IP65 flood light luminaire with power COB LED as light source cast aluminium LED light fitting 150 watt electronic driver complete all as specified and as directed by Engr-in-Charge. Make:- Philips/Crompton/Havells

Supply and fixing in replacement of street light fitting bracket fabricated of 40 mm GI tubing medium grade duly bent to shape, 1.5 mtr long complete alongwith two Nos MS clamps (40x5)mm size and necessary nuts, bolts & washers complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of post top lantern decorative luminaire with diffuser and painted spun aluminium deflector 30 watt including all accesories complete all as specified and as directed by Engr-in-Charge. Make:- Crompton / Bajaj/Havells

Supply and fixing in replacement of time switch distribution board made out with MS box 2mm thick with analog type time switch complete with 3 pole power contactor 32 Amps, and time switch, on/off switch, indicator and control wiring complete all as specified and as directed. Make:- Indoasian Cat Part No. TL032ABO or equivalent in HPL/L&T

Supply and fixing in replacement of Power contactor 40 A, 4 pole of timer panel complete all as specified and as directed. Make:- HPL/ L&T/ Havells

Supply and fixing in replacement of LED street light fitting 60 watt consist of a high efficent LED street light made of aluminium die cast aluminium housing with lens, toughened glass top, maintainable type, IP66 complete all as specified and as directed by Engr-in-Charge. Make:- Wipro/ Havells/Crompton

Supply and fixing in replacement of LED street light fitting 90 watt consist of a high efficent LED street light made of aluminium die cast aluminium housing with lens, toughened glass top, maintainable type, IP66 complete all as specified and as directed by Engr-in-Charge. Make Halonix cat Pt No. HLSLD-10-90-CWL-I or equivalent in Havells/Crompton

Supply and fixing in replacement of LED street light fitting 120 watt consist of a high efficent LED street light made of aluminium die cast aluminium housing with lens, toughened glass top, maintainable type, IP66 complete all as specified and as directed by Engr-in-Charge. Make:- Wipro/ Havells/Crompton

Supply and fixing in replacement of LED street light fitting 45 watt consist of a high efficient LED street light made of aluminium die cast aluminium housing with lens, toughened glass top, maintainable type, IP66 complete all as specified and as directed by Engr-in-Charge. Make:- Wipro/ Havells/Crompton

Supply and fixing in replacement of electronic driver in put voltage upto 230 Volt and out put voltage 36 to 90 volts for LED street light fitting 45 watt complete all as specified and as directed. Make : Crompton /Bajaj/Havells

Supply and fixing in replacement of electronic driver in put voltage upto 230 Volt and out put voltage 36 to 90 volts for LED street light fitting 60 watt complete all as specified and as directed. Make:- Crompton /Bajaj/Havells

Supply and fixing in replacement of electronic driver in put voltage upto 230 Volt and out put voltage 36 to 90 volts for LED street light fitting 90 watt complete all as specified and as directed. Make:- Crompton /Bajaj/Havells

Supply and fixing in replacement of electronic driver in put voltage upto 230 Volt and out put voltage 36 to 90 volts for LED street light fitting 120 watt complete all as specified and as directed. Make:- Crompton /Bajaj/Havells

M&L in replacement of three core 2.5 sqmm copper conductor cable for connecting up street/ security light with pole junction box complete all as specified and as directed.

S&F in replacement MCCB 63 Amp, 4 pole 16 kA of timer panel complete all as specified and as directed. Make:- HPL/ L&T/ Havells

S&F galvanised steel tube, light grade with all fitting complete laid in trenches/ road / Path/ on pole of 50mm bore complete all as specified and as directed.

BRIJ MOHAN LAL AND CO. (BID ID -3317499)

M/S Anand Enterprises (BID ID -3317886)

M/s Prakash Enterprises (BID ID -3317548)

Commercial Traders (BID ID -3323678)

ETERNITY PROJECT (BID ID -3324789)

S.R. Constructions (BID ID -3317883)

Saini Enterprises (BID ID -3317805)