86123REPAIRS TO INTERNAL ROAD AT AFMC UNDER GE (CENTRAL) PUNE.

Amount

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bitumen (VG-10 grade ) @ 5.0 kg per 10 sqm and providing and laying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5% paving bitumen of grade VG-30 , binder content by weight of total mix , rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and directed. Note : Laying shall be done by means of self propelled mechnical paver, finishing with suitable speed and capable of laying, spreading, tamping and finishing.

M&L for Premix bituminous macadam (consolidated thickness not more than 75 mm) with 4 % binder content of paving bitumen of grade VG-30 , by weight of total mix, laid and rolled with 8 to 12 tonne vibrating power road roller to required gradient and camber up to outer edges of road on existing black top surfaces complete all as specified and as directed. Note : (i) Cost of testing charges material and transportation etc for job mix formula shall be inclusive in the unit rate by the tenderer and no extra payment shall be admissable on this account. (ii) mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver.

M&L for repairs to pot holes depth n exc 30 mm, area n. exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc., cutting around edges to at least 25 mm in depth and making good by applying a tack coat with bitumen primer (VG-10) @ 5 Kg per 10 Sqm, putting in premixed bitumenous macadam, well rammed and and sealed with binder @ 9.80 Kg (VG-30) per 10 Sqm binded with 0.09 cum of stone chipping 6.3 mm size and again well rammed (including supply of premixed bitumen macadam binder and chippings) laid with mechanical paver, rolled & compacted in required gradient and camber with 8 to 12 ton power roller complete all as specified and as directed

M&L for marking lines, dashes, arrows, letters etc. not exceeding 15 cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area conforming to MOST & BIS specification, not less than 2.5 mm thick of white / golden / yellow as approved colour / shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt, oil grease etc complete all as specified and as directed.

MOHANLAL MATHRANI CONS. PVT. LTD.

Sunshine Ventures