S/E of Traffic Signal light at Saheed Udham Singh Chowk and Neta ji Subhash chander chowk in MC Dharuhera. (including three year maintenance)

Providing trenchless cutting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at the worksite and laying of 50mm internal diameter HDPE pipe inside road for road crossing of the cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including the cost of all accessories for road crossing for laying of cables.

Supply/Erection/Testing/Commissioning of vehicle actuated road traffic signal Master Controller. It should be compatible with C-DAC ATCS Technology Microprocessor based controller including windows base software to be provided and installed along with CF system must have green signal conflict monitor unit. Controller must have RS 232 Serial communication Port for programming with provision for up gradation with GSM communication Later on with help of extra peripherals. Controller must function at least in following 3 modes. The product shall be as per relevant ISS and ISO-900/2000compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge. a) Manual mode , b) Auto Mode multiple day plan mode, day of the week and date of year. c) Vehicle actuated mode. The traffic signal control should be approved by CDAC, Ministery of communication and IT, Govt of India Make: Siemens,CMS,Keltron,Bel,Envoys,Metro

Supply and Erection of Cantilever (6.5 plus 0.5) = 7 mtr. long pole having dia 200 mm with a base plate is 320 x 320 x 20mm. pole sheet thickness is 4mm, with a suitable arm of 6 mtrs with a thickness of 3mm having a top dia of 75mm, with suitable foundation accessories i.e. 25mm dia 4 nos 850mm along with junction box in pole with steel rope) specification and steel grading shall be as per BSEN 10025..Compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in charge.Make:- Paruthi,kasper,bajaj,shiva.

Supply/Erection/Testing/Commissioning of metallc control cabinet of approximate the cabinet should be suitable to house Micro processor controller, master controller/ switching control.

Supply and Erection of Microprocessore based reverse Full Graphics count down timer 340X340MM for ATC signals to depict the timings of RED straight or side Green Trimmings independently.MAKE BEL, Siemens, ENVOYS, CMS,Keltron

Supply and erection of ms round mounting clamps for light set titeing of poles complete in all respect upto the atisfaction of engineer in charge of the work.

Supply/ Erection/Testing/Commissioning of camera based Vehicle Detector (for counting and Classificationof vehicles) at each arm of the traffic junctions. The detector to be managed through web-based interface. The outputs of the detectors shall indicate the presence of vehicles and shall be used to influence the operation of the traffic signal controller and shall generate counts. Camera Sensor1/3-inch HD Mega pixel Highly sensitive CMOS Sensor–Monochrome Sensor pixel size and sensitivity- 3x3 um or better 4 .2 V/lux sec or better Lens- M12 2.8mm, F1.2 ,Processor- ARM 9, 400 MHZ, 128MB RAM , Power- 12v/3w,Housing- IP66 rated Field of View - The camera should be able to see 20-25 meter down from a stopline when installed on a traffic signal pole. This will help to provide the queue length Upto 25 meters from stopline and to estimate speed of movement, compelete in all respects including the cost of all required accessories upto the entire satisfaction of engineer-in-charge. Make:- Mediatronix, Flir thermicam

Supply and erection of Solar systems 400 watt, 1 nos Solar Charge controller, 2 Nos. tubular battery 12 volt, 100 Ah, and 1 No Invertor, MS iron water proof box for battery and controller system complete in all respect upto satisfaction of engineer in charge of the work. Complete as relevent IS/BS Standard. Make :- Exide, Amron, uminous.

Supply/Erection/Testing/Commissioning 300mm dia Signal Heads of polycarbonate material with led retrofit kit , EN certified, CE as per EN-12368 Make: Siemens,CMS,Keltron,Bel,Envoys amber light

Supply/Erection/Testing/Commissioning 300mm dia Signal Heads of polycarbonate material with led retrofit kit , EN certified, CE as per EN-12368 Make: Siemens,CMS,Keltron,Bel,Envoys green light

Supply/Erection/Testing/Commissioning 300mm dia Signal Heads of polycarbonate material with led retrofit kit , EN certified, CE as per EN-12368 Make: Siemens, CMS, Keltron, Bel, Envoys red light

Supply and erection of Junction Box complete in all respect.

Supply and Erectin of cable 1.0 sq.mm, copper flexible 6 core cable (junction box to lights). Make:-Havells, Polycab.

S/E of U/G cable one mtr. below ground level covered with sand and bricks including necessary connection digging and refilling of trenches 10sqmm x 2 core cable)Make: Havells, Polycab, KEI, Paramount

S/E of U/G cable one mtr. below ground level covered with sand and bricks including necessary connection digging and refilling of trenches 10sqmm x 2 core cable)Make: Havells, Polycab, KEI, Paramount

Supply and installation of the cloud server application smart Traffic Monitoring and management solution with lenience 3 years.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]

[24.8.5]RCC FOUNDATIONS FOR OCTAGONAL POLES 5. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7m high pole [Through Rate]

Please Enable Macros to View BoQ information