8881 SPL REPAIR TO PUMP SET AT MHCTC, REPLACEMENT OF BER PUMP SET AT DAD PUMP HOUSE AND SPL REPAIRS TO INTERNAL WIRING TO BLDG No P-50 AT MINTSD AND PROVN OF CERTAIN LBW, RW IN THE AREA OF MHCTC, ALC AND CMDC UNDER GE SOUTH PUNE

Amount

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. as per engr-in-charge.

Taking down old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc.,heavy duty ISI marked,mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/sockets, etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- [Note :- Making good of disturbed surfaces will be done by contractor without any claims.]

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

M & L for submain wiring complete with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 4 Sqmm complete all as directed. [Note :- (i) 2 runs of 6 Sqmm conductor and one run of 4 Sqmm earth wire shall be measured as one unit length.) (ii) Making good of disturbed surfaces will be done by contractor without any claims.]

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc.,heavy duty ISI marked,with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coats of anti corrosive paint over of red oxide primer,internally,covered with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches, including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 amps socket outlet point on independent board [Note :- Making good of disturbed surfaces will be done by contractor without any claims.]

S&F piano type switch 5 amps single pole,240 volts complete all as specified and as directed.

S&F ceiling rose surface type three terminals,240 volts complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F piano type switch 15 amps single pole, 240 volts complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb complete etc. [Make - Philips / Wipro / HPL]

S&F in replacement of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as directed

S&F MCB DB SPN 8 way ,double door, with 200 amp rated busbar 240 V,recess mounted all as specified and directed by engineer in charge. [Make :- Legrand / Schneider / HPL]

S&F vertical 4 way TPN double door,recess mounted/wall mounted DB incl one number,MCCB as incomer 3 pole and neutral of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory all as specified and directed by Engineer in charge. [Make :- Legrand / Schniender /HPL]

S&F MCB SP 6-32amps,10KA, 'C' series complete all as specified and as directed.

S&F MCB SPN 10-40 amps,10KA, 240V,'C' series complete all as specified and as directed,

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver,glare free,smooth light distribution.CAT Part No.Garnet 20 W LED (D532065) of Wipro or of equivelent in Havells/HPL/Philips

Supply and fixing Integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 25mm GI Pipe (including GI pipe) complete with accessories conforming to Cat Part No : HPLLEDSL3060S of HPL or of equivalent in Wipro / Phillips / Havells / Fortune Art all as specified here-in-after including taking down old fitting.

Supply and fix exhaust fan AC single phase 230/ 240 volts heavy duty of size 300 mm sweep, 1400 rpm, with louvers complete, all as specified and directed of Make Turbo Force by Havells or equivalent make in Crompton/Orient.

Taking down Ceiling fans, removing to workshop for servicing, cleaning, lubricating, spray painting one coat with synthetic enamel paint, writing MES No., replacement of split pin, rubber bush and other spare required if any including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations complete all as specified and as directed.

M&L for cutting and making hole into or through cement concrete or stone masonry wall of thickness upto 45cm and in girth n.exc. 45cm for fixing exhaust fan of size 300mm sweep & providing fastners grouted in wall four nos inside for fixing of Exhaust fan and four nos outside for louvers and redressing the surface and making smooth with cement plaster 1:4 to match existing surface incl lime white wash all as specified and directed.

Supply, installation and fixing of copper pipe for medical gas pipe lines solid drawn , de-oxidised, seam less,non arenical half hard tempered and degreesed copper piping alongwith copper fittings such as elbow, tees, saddles with steel/brass screws, etc confirming to BS-6017-1981 table -2 (CU-DHP) of following sizes :- [Note:- Medical gas pipe line shall follow HTM Norms.]

28 MM OD x 0.9 mm Thick

22 MM OD x 0.9 mm Thick

15 MM OD x 0.9 mm Thick

12 MM OD x 0.7 mm Thick

Supply, installation ,testing and commissioning of isolation valve assembly for medical gas services for the following sizes :-

OD 15 mm pipe

OD 22 mm pipe

OD 28 mm pipe

Supply, installation, testing and commissioning of front loading DIN standard terminal unit (outlets) with probe/adapter incl antistaitctube upto bed complete for medical gas services for the following :-

Oxygen Terminal Unit

Medical Air -4 Terminal Unit

Vaccume Terminal Unit

Supply,installation, testing and commissioning of gas alarm for Oxygen & Nitrous Oxide (Mecroprocessor controlled digital display alarm for low high pressor with mute test & gas specific nist connection) confirming to NFPA 99 : 2005 BS EN ISO 9170-1:2008 and required for 4 gas alarm complete for medical gas services complete all as specified and as directed.

Supply, installation,testing and commissioning of area Zonal service unit of 3 gas valve box with pressure indicating gauze complete for medical gas services complete all as specified and as directed.

Supply, installation,testing and commissioning of flow meter with humidifier having a control range of 0-15 LPM, made of chrome plate brass body complete for medical gas services complete all as specified and as directed.

Supply, installation, testing and commissioning of vaccume unit with regulator and 600 ml collection jar made of unbreakable polycarbonate material with a wall bracket complete for medical gas services complete all as specified and as directed.

M&L for conducting survey to access the feasibility of under ground water source at 2 places complete all as specified and as directed.

M&L for conducting survey to access the feasibility of under ground water source at 4 places complete all as specified and as directed.

M & L for fixing of MS reducer, ball plug, well cap, MS srip for centering, MS iron clamps, electric logging and sample strata box for bore well having casing pipe for pump as 200 mm dia complete all as specified and as directed.

M&L for drilling Trial bore of 150 mm dia upto 60-90 Mtr depth or till getting sufficient yield below ground level in any kind of soil strata including hard stone/ boulder including MS Cap, MS flat iron clamps, redicing socket etc. all as specified and directed by Engr-in-Charge.

M&L for drilling Trial bore of 150 mm dia upto 300 Mtr depth below ground level in any kind of soil strata including hard stone/ boulder including MS Cap, MS flat iron clamps, redicing socket etc. all as specified and directed by Engr-in-Charge.

M & L for casing pipe PVC 150 mm dia of 6Kg/sqcm pressure rating complete all as specified and as directed.

M & L for PVC bore cap 150/200 mm bore ISI mark complete all as specified and as directed.

M & L for development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water complete all as specified and as directed.

M & L for yield test for borewell by continuously pumping of water for 16 hrs to determine safe pumping yield complete all as specified and as directed.

Supply, installation, testing and commissioning submersible pump to discharge 40 Ltr/min of water at 150 mtr head ISI marked complete all as directed by Engr-In-Charge.

Supply and lowering in borewell HDPE pipe including connecting nipples, clip etc of 40 mm dia of pressure rating 6 kgf/cm2 complete all as specified and as directed.

Supply and louring in borewell HDPE pipe 50 mm dia of pressure rating 6 kgf/cm2 complete all as specified and as directed.

S & F Nylon rope of suitable size as support to borewell pump complete all as specified and directed.

Testing of water samples of the borewell for its Bacteriological and Chemical Analysis from State Govt Laboratory

S&F LT 1100 V grade water proof flat cable suitable for submersible pump of size 2.5 sq mm 4 core including water proof joint etc complete all as specified and as directed.

Supply and lay LT UG cable with stranded aluminium conductor 4 core x 10 Sqmm, PVC insulated, sheathed, armoured 1100 Volts Grade, laid in trenches/fixed to ples/walls/ drawn through pipes with suitable size cable glands, crimping type cable lugs etc all as specified and as directed.

Supply and lay LT UG cable with stranded aluminium conductor 4 core x 16 Sqmm, XLPE insulated, sheathed, armoured 1100 Volts Grade, laid in trenches/fixed to ples/walls/ drawn through pipes with suitable size cable glands, crimping type cable lugs etc all as specified and as directed.

S & F Non return valve 40 mm dia Brass ISI marked complete all as specified and as directed.

S&F GI pipe medium grade 50 mm dia bore with GI bend, elbow, union, nipple etc laying in trenches with complete all as specified and as directed.

S&F GI pipe medium grade 40 mm dia bore with GI bend, elbow, union, nipple etc laying in trenches with complete all as specified and as directed.

S&F Gun metal gate Valve 40 mm bore complete all as specified and as directed.

S&F Gun metal gate Valve 50 mm bore complete all as specified and as directed.

S&F non returning sluice valve 50 mm dia complete with by pass arrangement complete all as specified and as directed.

S&F for valve sluice, flanged of class 1.6 PN 50 mm dia complete all as specified and as directed.

S&F for valve sluice, flanged of class 1.6 PN 100 mm dia, ISI Marked complete all as specified and as directed.

S&F non returning sluice valve 100 mm dia, ISI Marked complete with by pass arrangement with all joining/jointing materials complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good Bottom surface for laying /removing of cable all as specified and directed by engr in charge.

Hard / dense soil

Soft/disintegrated rock/ road/ PCC flooring/plinth protection etc

Returning, filling, in including spreading, levelling, watering and well ramming in layer not exc 25 cm in any type of soil complete all as specified and as directed.

Removing excavated surplus soil at a distance not exc 50 mtr and deposting where directed.

M&L for Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 80 mm ,half round (02 Nos for top & bottom) as specified by Engr-in-charge.

M&L for PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in foundation of poles,struts filling and mass concrete etc complete all as specified and directed.

Dismantling of existing pump/motor from foundation and demolition of PCC foundation including shifting of pump and motor pump house to MES store yard complete all as specified and directed.

Supply install testing and commisioning Centrifugal Pump set with Horizontal split casing two stage pump with bronze Impeller, to discharge 136224 ltr/hrs (37.84 ltr/sec) at 75 mtr head directly coupled with coupling guard to suitable capacity TEFC Squirrel cage electric induction 3 phase, 415 volts mounted on ISMC 100 mm channel with necessary fixing arrangement and consist of i) PCC foundation and height as per manufacturere instruction to match existing suction and delevery pipe. ii) Suitable size multi standard copper cable from panel to motor concealed in wall/floor in and PVC pipe. iii) 25 mm PVC pipe as drain out water pipe from foundation to outside the pump house building. iv) Suitable size MS heavy duty suction and delivery pipe with all joining/jointing materials to match the exising suction150 mm and delivery 100 mm pipe. v) Pressure guage of 10 kgf/sqcm with control valve, Make Pump - Kirlsokar (split casing pump type DSM) or equivalant /Crompton Greaves/KSB [Motor Make :- Kirloskar (TEFC) Squirrel cage or of equivalant to SIEMENS / ABB]

M & L for earthing with galvanised steel earth plate electrode 600 x 600 x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron strip 32 x 6 mm and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed by Eng-in-Charge.

Supply, laying, testing PVC insulated,PVC sheathed cable galvanised steel strip or wire armoured electric control cable (heavy duty) with stranded copper conductor of size 4 core 4 sqmm complete all as specified and as directed.

Dismantling the existing mono block pump set with foudation and deposited the pump set to MES store yard complete all as specified and as directed.

Supply, install, testing and commissioning mono block pump set with CI impeller to discharge 11.4 Ltr/sec at including 3 phase, 415 Volts, 50 Hz electric induction motor, 36 mtr head with base fram made out of ISMC 75 mm channel suitable fixed to the foundation as per manufacturer instruction and consists of following :- i) PCC foundation and height as per manufacturere instruction to match existing suction and delevery pipe. ii) Suitable size multi standard copper cable from panel to motor concealed in wall/floor in and PVC pipe. iii) 25 mm PVC pipe as drainout water pipe from foundation to outside the pump house building. iv) Suitable size GI drawn suction and delivery pipe with all joint/jointing materials to match the exising suction 80 mm and delivery pipe of 50 mm dia. v) Pressure guage oif 10 kgf/sqcm with control valve, [Pump Make - Kirloskar or equivalant /Crompton Greaves / KSB]

TAKSHASHILA ELECTRICALS