Establishment Galvalume Sheet covered Roof Parking for 2 Wheeler at Overhaul Division Opposite to Main sec gate

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Specification

Earth work in excavation in all type of soils by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m, etc., all complete as directed by Engineer-in-Charge.

Removal of excess earth outside the HAL premises upto lead of 10km(326.68+5*23.16), etc., all complete as directed by Engineer-in-Charge.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m as per site requirement, etc., all complete as directed by Engineer-in-Charge.

Taking out existing CC interlocking paver blocks from footpath/central verge inlcuding removal of rubbish etc disposal of unserviceable material to the dumping ground for payment shall be made separately and stacking of serviceable material within 50 m, etc., all complete as directed by Engineer-in-Charge.

Dismantling of cement concrete manualy/by mechanical means including disposal of materials within 50meters, Nomcal concrete 1:4:8 or linear mix (i/c equivalent desig mix), etc., all complete as directed by Engineer-in-Charge.

Dsmantling dressed stone work ashlar face stone work,marble work or precast concret work manually/by machine including stacking of serviceable and disposal of unserviciable material within 50 meters, etc., all complete as directed by Engineer-in-Charge.

Providing and laying factory made chamfered edge cement concrete paver blocks in footpath,parks,lawn,drive ways or light traffic parking etc of required strength thickness and size /shape made by table vibratory method using PU mould laid in required color and pattern over 5mm thick compacted bed of sand ,compacting and proper embeding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with sand and cuting of paver block as per required size and pattern finishing and sweeping exta sand complte as per direction of EIC. 16.91.1: 60mm thick cement concrete block of M-35 grade with approved colour,design and pattern, etc., all complete as directed by Engineer-in-Charge.

Laying of old cement concrete interlocking paver blocks of any design/shape laid in required line,level,curvature,colour and pattern over and including 50mm thick compacted bed of coarse sand,filling the joints with fine sand, (Old CC paver blocks shall be supplied by the department free of cost), etc., all complete as directed by Engineer-in-Charge.

Providing and laying cement concrete(1:2:4-1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.

Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All works up to plinth level.1:4:8 (1 cement:4 coarse sand derived from natural souces :8 graded stone aggregates 40mm nominal size derived from natural sources), etc., all complete as directed by Engineer-in-Charge.

Providing Steel reinforcement TMT bars of Fe 500 grade for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level including handling hooks, etc., all complete as directed by Engineer-in-Charge.

Centering and shuttering inlcuding strutting,propping etc and removal of form for Foundation,footings and basis for columns, etc., all complete as directed by Engineer-in-Charge.

Structural steel work riveted,bolted or welded in built up sections,trusses and framed works, inlcuding cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel, etc., all complete as directed by Engineer-in-Charge.

Providing and Fixing precoated galvanized iron profile sheets (size ,shape and pitch of corrugation as approved by Engineering in charge ) of total thickness 0.5mm (base metal of minium 0.45mm thickness with total coated of 0.050mm) with zinc coating 120 grams per sqm in 240mpa steel grade,5-7 microns epoxy primer on on both side of sheet and polyster top cot 15-18 microns.Sheet should have protective guard film of 25 micron min to avoid srathes during transportation and should be supplied in single length upto 12m or as desired by EIC.The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm) with EPDM seal,complte up to any pitch in horizontal /vertical or curved surfaces exlcuding the cost of purlin,rafter and trusses and including cutting to size and shape wherever required, etc., all complete as directed by Engineer-in-Charge. Note: (i) The quoted rate shall be inclusive of overlaps and wastages. (ii) A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole.

Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :Two or more coats on new work, etc., all complete as directed by Engineer-in-Charge.

Rupees Twenty Six Lakh Thirty Three Thousand Four Hundred Forty Seven and Ninety Seven Paise Only

Approximate Amount Put to Tender

Rupees Four Lakh Seventy Four Thousand Twenty and Sixty Three Paise Only

Rupees Thirty One Lakh Seven Thousand Four Hundred Sixty Eight and Sixty Paise Only