Construction of NTPHC at Moshwara Shopian (Balance and Finishing work)

Amount

Providing and laying Reinforced cement concrete 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) (crushed) in suspended floors, beams, columns, roofs, lintels balconies, landings and staircase excluding cost of centering and shuttering all work up to floor V level including all carriages and cost of materials involved up to site of work complete.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,columns,plinth beams, girders, bressumers and cantilevers, using 12mm ply including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs,staircases, landings, balconies and access platforms. using 12mm ply including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls using 12 mm ply including all carriages.

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically Treated bars. including all carriages .

Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all carriages.

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Silver wood /imported Kail wood including all carriages

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages and cost of materials involved.

Providing wood work in frames of false ceiling , Partitions etc. Sawn and fixed in poisition in budloo wood including nuts and bolts ,nails and all carriages.

P/L PVC conduits 2mm thick of Finolex, Ravindra, Polycab or equivalent make of following dia.

25/32 mm dia

Deep junction box

Fan junction box

Structural steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete including all carriages leads lifts etc.

Providing colour coated G. S. sheet roofing fixed with GI self screws with pvc caps of matching colour design and pattern as per directions of Engineer-in -charge bolts and nuts excluding the cost of purlins,rafters and trusses with0.50mm thick including carriages all complete.

Providing coloured ridges /hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks , bolts and nuts 8mm dia GI limpet and Bitumen washers complete 0.50 mm thick including carriages Complete

Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 (triple layer)marked indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes with fittings but without base support for tank(Sintex,Electroplat,Star,Lotus or equivalent having valid ISI license) including all carriages.

Providing and fixing of plain eaves boarding 300mm x 40 mm (nominal size) imported kail wood incl cost of nails and carriages complete.

Providing & Fixing of 50X50 mm/2 thick wooden cornice of imported kail wood incl. all carriages complete.

Providing and fixing of 28 SWG CGI sheets for soffits with small corrugations of standard /approved quality including cost of nails,scaff folding for soffits but excluding cost of frame work including all carriages complete.

Providing and fixing of 10 mm thick plywood/board(kitply,Greenply,Century,Sarda,Mayur or equivalent) with nails etc as ceiling/partition of walls or equivalent work excluding cost of frame work including all carriages complete.

Marble work gang saw cut (polished and machine cut) for wall lining (veneer work),stairs ,steps,landings,porch,pillars,counters and other locations in cement mortar 1:3 (1 cement: 3 coarse sand) including pointing with white cement mortar 1:2 (1 cement:2 marble dust) with an a mixture of pigment to match the marble shade.Raj Nager plain white marble/udhypuri green marble/zebra black marble 18 mm thick including all carriages.

Providing and fixing ceramic glazed tiles 300*300 mm(thickness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of NITCO,ORIENT,SOMANY,KAJARIA,or equivalent make in all colours,such as White,Ivory,Grey,Fume red,Brown sizelaid on 20 mm thick bed of Cement Mortar 1:4 (1 cement:4 coarse sand) and jointed with white cement and matching pigment etc complete including all carriages.

Providing and fixing Ist qualityCeramic glazed wall tiles confirming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except begundy,bottle green,black of any size as approved by Engineer in charge in skirting ,risers of steps and dados over 12 mm thick cement Mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade (size of tile as specified by the site Engineer) including all carriages complete

Providing and laying vitrified floor tiles 600X600 mm (thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to 13:15622 of approved make like NITCO,KAJARIA,SOMANY or equivalent in all colours and shades, laid on 20mmthick cement mortar 1:4 (I cement :4 coarse sand)including grouting the joints with white cement andmatching pigments etc.( including all carriages complete

Earth work in excavation by manual/mechanical means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan/over areas (exceeding 30 cm and upto 1.5 m in depth,1.5 m in width as well as 10 sqm on plan ) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 5km from site /edge cutting or as directed by EIC. disposed earth to be leveled and neatly dressed in all kinds of soil including pumping out water caused by springs,tidal or river seepage,broken water means or drains and the like complete.

Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 stone agg. using 20mm nominal size) including curing complete including all carriages and cost of materials involved.

15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6(1 cement:6 coarse sand) including all carriages complete.

Providind and fixing 35 mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows including ISI marked M.S prepared butt hinges bright finished of required size with necessary screws excluding panelling/glazing which will be paid separetely ,all complete including carriages as per direction of engineer-in-charge imported kail wood

Providing and fixing 35 m thick wire guaze shutters using galavanised M.S wire guaze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors,windows and clerestory windows with ISI marked M.S pressed bright finished butt hinges with b necessary screws of required size including carriages complete imported kail wood .

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows(Area of opening for panelled inserts excluding portion inside grroves or rebates to be measured) .Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides.Grade I,Type II IS:12823 marked including all carriages.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete including all carriages

Providing and applying white cement based putty (Birla or equivalent )of 2mm thickness over plastered surface to prepare the surface even and smooth including all carriages complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.New work (two or more coats) over and inluding priming coat with cement primer including all carriages.

Finishing walls with textured exterior paint of required shade on New work(two or more coats applied @3.28 l/10 sqm over and including base coat of water proofing cement paint applied @2.20 kg/10 sqm) including all carriages

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages.

Providing and fixing of 3.5mm thick ordinary sheet glass pans to windows and ventillator shutters embeded in putty and fixed with beadings including cost of nails etc and carriages complete

Providing and fixing of Almunium hardware fittings to doors and windows of approved quality (ISI mark) approved by the site Engineer including all carriages.

Tower bolts 4"

Tower bolt 6"

Handles 4"

Handles 6"

L-Drop 12"

Hinges 3''

Hinges 4''

Providing edge moulding to 18 mm thick marble stone counters,vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design as approved by Engineer-in-Charge (Marble work)

Kota stone slab flooring 20 -25mm thick (semi polished) laid over and jointed with grey stone slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:3 (1 cement:3 coarse sand) 15-20 mm thick including all carriages.

Providing and fixing of PVC soil/waste/ventellating pipes of Prince/Phenolex or equivalent make(Type-B) of following size as directed by the site Engineer including all carriages.

100 mm dia pipes

75 mm dia pipes

Providing and fixing of PVC pipe fittings of Prince/Phenolex or equivalent make of following size to soil/waste/ventellating pipes as directed by the site Engineer including all carriages.

100 mm dia door tee

100 mm dia plain bend

100 mm dia collar

100 mm dia door bend

100 mm dia P/S trap

Reducer 100X75 mm

Stays and clamps

75 mm dia plain bend

75 mm dia collar

75 mm dia Floor trap

Providing and fixing of GI pipe lines to walls/ceilings/floors (Light grade of specified mass )Prakash Surya /Jindal or equivalent including jointing,testing and making good the surface as directed by the site engineer including all carriages complete job

15 mm dia

20 mm dia

Providing and fixing GI pipe fittings of specified brand (ISI mark UNIK/Nike/Prince or equivalent including testing and commissioning and all carriages complete.

15 mm dia elbow

15 mm dia Tee

15 mm dia Nipples 2"-6"

15 mm dia union

15 mm Tank nipple

Ball/gate value 15 mm

20 mm Tank nipple

20 mm dia elbow

20 mm Tee

20 mm dia nipple 2"-6"

20 mm dia union

Ball value/gate value 20 mm

Providing and fixing of CP fixtures of Jaguar /Hindware /Cera / Essel/Parko or equivalent make including jointing testing and making good to surface as directed by the site Engineer including all carriages.

Bib cock long body

Angle value/stop cock

CP connection 18''

CP nipple 11/2''

Sink 24X18''

Wall mixer

Basin mixer

Sink mixer

CP waste pipe

CP waste coupling

Mirror

CP gratting

Soap case

Providing and fixing water closet squatting pan ( Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. brackets, 32mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required white vitereous china W.C. pan of size 580 mm including carriages(Hindustan/Cera or equivalent)

Constructing brick masonry manholes of size 12''X12''" in cement mortar1:4 ( 1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design including PVC frame with cover complete job including all carriages and costs.

Providing and fixing of 50 ltr water heater gyser (Venus/Recold/Jaguar or equivalent make including nuts and bolts and necessary fittings including all carriages complete job.

Providing and fixing wash basin with pedastal (Jaguar/Hindware/Cera/Essal or equivalent) and making good the walls wherever required white vitrous china washbasin size 630*450 including all carriages

Providing and fixing in positon 0.50 HP water motar of standard quality (Crompton/KIRLOSKAR/Havells or equivalent make including necessary fittings as directed by the site engineer including all carriages complete.

P/F of 50mm dia stainless steel railing of 304 grade of hollow tube 1.6 mm thick of jindal/salem make or equivalent incl:welding and fixing with stainless steel machine screws for making required size and shape,buffing etc. complete and fixing stainless steel balusters upto 900mm height and S S tubes,three in one installed horizontally incl:cutting,welding,grinding to required shape and size by required steel dash fasteners,nuts, bolts,screws etc in floors and treads incl: providing S S shoe at each balusters complete as per archtectural drawings and as per directions of engineer in charge incl:cutting of granite/marble floors and fastening with lead grouting if required complete job at site of work including all carriages.

Add over item NO( 51) for master bluastter of standard height and dia.

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone including all carriages.

M/s Khursheed Ahmad Kuchay