Providing of 30 KVA servo-transformer at MMC Noorbagh, NTPHC Zewan falling under the jurisdiction of ESD Nawakadal ED 3rd (Turnkey Basis)

Amount

Providing of 30 KVA servo-transformer at MMC Noorbagh falling under the jurisdiction of ESD Nawakadal ED 3rd (Turnkey Basis)

Supply,installation, testing and commissioning of 415 V, 3 Phase, 30 KVA Servo Stabilizer oil Cooled (including Oil- 100 Ltrs), Output Voltage Accuracy ± 1%, HV cut-off set. LV cut-off set. O/L trip set.Time delay set Operating mode (auto/manual), Response time of 10 ms, Input Voltage Range from P-P - 240 - 485 V, P-N - 138.5-280 V (including lugs/clamps for termination) (Refer Technical specification enclosed separately).

Supply, installation, testing and commissioning of S.T. poles 8.0 Meter long swaged Type conforming to ST 410 SP-15, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5 mtr (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation, testing and commissioning of 50 mm² AB (LT) Cable ( 3 x 50 + 1 x 16 + 1 x 35) mm² XLPE (1.1kV, 3+1 C, Al) including thimbles/lugs/clamps

Supply, installation, testing and commissioning of Suspension/Tension Clamp with eye hook

Supply and fixing of Galvanized Nuts and Bolts as per IS

Supply,installation, testing and commissioning of Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm

Supply and fixing of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Providing and painting of poles with single coat of red oxide an two coats of Aluminum Paint

Providing of material and laying of Cement bottoming of poles (1:2:4 Mix as per REC Standards 0.45M3 per Pole)

M/S TOP TECH ENGINEERS

M/S APEX ELECTRICALS and MECHANICAL ENGINEERING WORKS