COMPREHENSIVE REPAIRS AND ROOF TREATMENT NAVY NAGAR COLABA MUMBAI UNDER GE NW NAVY NAGAR

Amount

Demolition of lime Concrete of any description and in any position not otherwise specifically provided for including china mosaic & WC complete all as specified and directed

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors complete all as specified and directed. (Note : WPC shall be measured and paid seperately)

M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor 150mm thick complete all as specified and directed

Supply only water proofing compound Fosroc Dr Fixit or equivalent complete all as specified and directed

S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in and including concrete including provision of lime concrete bedding complete all as specified and directed

S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M &L 20 mm thk 1:6 Screed bed or bedding layer of mortar complete all as specified and directed

M&L Vitrified Ceramic tiles (light shade) of size 600mmx600mmx10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 15 mm thick cement screed base (1:6) complete all as specified and directed. (Note : The rate includes the cost of cement 15 mm thick screed bed)

M&L Vitrified Ceramic tiles (light shade) of size 600mmx600mmx10mm thick (square/ rectangular) polished, in vertical surfaces (dado/skirting) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10 mm thick cement plaster (1:4) complete all as specified and directed. (Note : The rate includes the cost of cement 10 mm thick cement plaster)

Dismantling stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed (Note : The rate includes the cost of cement screed bed)

M&L machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. (Note : The rate includes the cost of cement plaster )

S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size 300x 300 mm area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M/L 10mm thick backing layer in CM 1:4 complete all as specified and directed

S&F Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

Cutting holes in brick walls but in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement lime mortar in cm 1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts complete all as specified and directed

M & L MS works in holdfast made of fe -290 of length complete all as specified and directed

S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length complete all as specified and directed.

S & F Aluminium handles, cast type, anodised of length 150 mm complete all as specified and directed

S&F 100mm size stainless steel medium weight butt hinges complete all as specified and directed

Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water & removed debrises out MD land complete all as specified and directed.

M&L Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified and directed (WPC to be mixed in setting coat only and shall be measured and paid separately)

M & L Applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height complete all as specified and directed. Make :- Pidiite fosroc or equivalent

M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches complete all as specified and directed

M & L sagol finish to plastered on old & new plastered surfaces to a thickness not less than 1.00 mm trowelled to an even & smooth surfaces complete all as specified and directed

All as per item No 29 above but 10mm thick in CM (1:3) in ceilling complete all as specified and directed

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed

M&L preparation of new undecorated surfaces of walls,soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed

M&L preparation of old undecorated surfaces of walls,soffits & fascias of chajjas etc and applying one coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed

M&L applying one coats of white wash on old plastred surfaces including preparation of surfaces as in wall complete all as specified and directed

All as per item No 35 above but on ceiling "

M&L applying two coat of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified and directed

M&L applying one coat of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified and directed

Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness complete all as specified and directed (below or above ground level)

M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk in flooring, complete all as specified and directed

S & F in repairs Stainless sink coupling of external dia 0.11 m complete all as specified and directed

Refixing wash basin on existing brackets any size including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed .

Demolition brick work built cement mortar complete all as specified and directed.

M&L brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed

M&L applying one coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed

M&L preparation of old painted surfaces over 10cm width or girth and applying one coats of synthetic enamel paint on steel surfaces complete all as specified and directed

Hacking out broken glass panes of any description from wooden frames fixed with beads complete all as specified and directed

S&F 4mm thick pin headed type ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed.

Resecuring or easing & adjusting, without taking down but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed

Resecuring or easing & adjusting, without taking down upto 1 sq. m each complete all as specified and directed

shutters but exc 1 sq. m and n exc 2 sq. m each Refixing in same opening complete all as specified and directed

shutters but n exc 1 sq. m each Refixing in same opening complete all as specified and directed

S&F 125 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed

All as per item No 54 above but 100 mm"

S&F 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs.

All as per item No 56 above but 100 mm"

S&F in repairs 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets complete all as specified and directed

S&F CP brass pillar tap 15mm, screwed down high pressure fancy type complete all as specified and directed.

S & F 32 mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed

S & F pvc connectors of 15 mm size with PTMT nuts of length 600 mm length complete all as specified and directed

S & F PVC waste pipe of 32 mm dia 800 mm length complete all as specified and directed

S & Fin repairs PVC waste pipe of 32 mm dia 800 mm length complete all as specified and directed

S & F in repairs CP grating of size 100 mm complete all as specified and directed

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed

S &F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

S & F 30 MM thk Flush shutters, solid core construction, with particle board core both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed

M&L applying one coats of synthetic enamel paint over primer including preparation of wooden surfaces over 10cm width/girth complete all as specified and directed

S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length complete all as specified and directed.

S & F Aluminium handles, cast type, anodised of length 150 mm complete all as specified and directed

S & F in SS butt hinges 100 mm size complete all as specified and directed

S&F in repairs 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M&L aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete all as specified and directed (Make : as approved by GE)

S&F aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed (Make : as approved by GE)

Dismantling of Plain or corrugated FRP CGI /GI chajja any Guage thickness including all fittings and removal from MD land complete all as specified and directed

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. (a) The flashing, caping, as required will be factory manufactured in required shape out of same material as of roof sheeting and fixed by means of self drilling screws. (b) The payment will be done on the actual finished/covered surface area of the sheet. No separate payment will be made for the lap of sheet and accessories, bolts, nuts, washers, adjustable bolts, ridges, supports for gutters and other fixtures. These are deemed to be included in the quoted rates. (c) The galvanum sheets shall be fixed in isolated locations as in chajjas of width not more than 900 mm.

S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F rolled section as in main & cross beam , hip and jack rafter purlins where connected to common rafter and running rails etc complete using Fe-410-0 or Fe-310-0 complete all as specified and directed

M&L applying two coats of synthetic enamel paint over a coat red oxide on steel newly surfaces over 10cm width/girth incl preparation of surfaces complete all as specified and directed.

S & F 10mm dia 100 mm long dash through fastners bolts in concrete and brick work complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm girth & not but not exc 20 cm girth complete all as specified and directed

M&L for filleting in any position and to any shape of section area n.exc 25 Sqcm in cement sand mortar 1:4 including all mitres, stops complete all as specified and directed

Demolition of plain cement concrete in any description and any position not otherwise provided for i.e. PCC padding including roof treatment with any type of membrane (APP /glass fibre /hassian base felt) etc complete and taking down the debris from roof of height n.exc. 18m and removing debris outside MD land complete all as specified and directed

M&L for Providing, cement concrete type B1 1:2:4 (20mm graded stone aggregate) in PCC padding / levelling coarse on roof slab, kerbs or mud stops, rounded or chamfered on edges, laid over RCC roof finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing 10 mm thick rendering on cement concrete surfaces in cement mortar (1:4) mixed with water proofing compound whilst the concrete is green , finished even & smooth without using extra cement compete all as specified and directed. (Note: WPC will be measured & paid separately)

Providing roof treatment as under : - (a) Applying bitumenous primer @ 0.30 litres per sqm over cleaned and dry roof surface including parapet (b) M&L for applying a coat of blown bitumen 85/25 grade @ 1.20 kg per sqm over priming coat of roof . (c) Providing and laying 4mm thick APP modified polyester reinforced water proofing memberane with minimum weight of 3.5 kg/sqm , as spefieid. The APP membrane shall be laid using torch-on application with minimum 10 cm side overla and 15 cm end overlapl. The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. (Make : Pidilite Industries/STP/IWL) (d) Providing polypropylene/polyester, non-woven geotextile fabric of 150 gsm

M&L cement concrete tiles 25 with grey cement & pigment cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:4 over APP membrane at roof, and cut and polished complete all as specified and directed

Unity Enterprises

Darpan Construction

Nilesh Construction