Providing and laying CTSB, CTB, Tack Coat, P.C. etc. work in Service Road of 2 Lane Bridge on level Crossing No. 32 C (Athsarai) Ajhua, of NCR on Kanpur Prayagraj Rail Section in District Kaushamb

Providing and laying CTSB, CTB, Tack Coat, P.C. etc. work in Service Road of 2 Lane Bridge on level Crossing No. 32 C (Athsarai) Ajhua, of NCR on Kanpur Prayagraj Rail Section in District Kaushamb.

Providing, laying and spreading Material on a prepared sub grade adding cement as 2% cement to the spread material Manually mixing in place with rotavator compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. As per Morth Specifications Clause 4.1 (401)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC and 4% Cement (OPC) in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base course on well prepared surface and compaction with smooth wheel roller of 80 to 100 kN weight to achieve the desired density including lighting , barricading and maintenance etc as per Table 400.11 & 400.12 and technical specification. As per Morth Specifications Clause 4.9 (406)

Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) or 13.2 mm to 0.09 mm (Type-b) aggregates using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. As per Morth Specifications Clause 5.11 (512)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats As per Morth Specifications Clause 5.11(512)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. As per Morth Specifications Clause 5.1(503)

Please Enable Macros to View BoQ information