REPAIRS TO CHARPOY AND CERTAIN WOODEN/STEEL FURNITURE AND CONNECTED ITEMS OF 20 WING AF STN UNDER GE AF BAGDOGRA

Amount

CHAIR DINING (FD-228,279,16,16(M)) Rear Legs Taking down old unserviceable Rear Leg and M&L for fixing of existing size New leg made out of 1st Class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge size of Leg 890mmx55mmx30mm

Front Legs Taking down old unserviceable Front Leg and M&L for fixing New leg of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge size of leg 460mmx55mmx30mm

Side Rail Taking down old unserviceable Side Rail and M&L for fixing New Side Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge size of rail 430mmx65mmx30mm.

Front or Back Rail Taking down old unserviceable Front or Back Rail and M&L for fixing New Front or Back Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge, size 440x30x65mm

Bottom Stiffener Taking down old unserviceable Bottom Stiffener and M&L for fixing New Bottom Stiffener of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge size of stiffener 430x25x20mm

Back Stiffener/Rest Taking down old unserviceable Back Stiffener /Rest and M&L for fixing New Back Stiffener/Rest of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge size of 45x15x405 mm cut oout of 45x35x405mm

Bracket : S&F new bracket triangular shape made out of 1st class hard wood where required with 02 Nos steel screws duly polished to match the existing Chair of size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : M & L for removing old/worn out rubber shoes and S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Re-caning Re- caning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 4mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Polishing Polishing two coats to new and old surfaces of Chair Dining after repair with french polish of approved quality after preparation of all surfaces .

CHAIR WRITING FD 20(M),280,DB-3982 Rear Leg Taking down old unserviceable Rear Leg and M&L for fixing of existing size New leg made out of 1st Class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 890x55x30mm

Front Leg : Taking down old unserviceable Front Leg and M&L for fixing New leg of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 665x55x30mm.

Side Rail Taking down old unseriveable Side Rail and M&L for fixing New Side Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 470x30x65mm

Front/ Back Rail Taking down old u/s Front or Back Rail and M&L for fixing New Front or Back Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 535x30x65mm

Bottom Stiffener : Taking down old unserviceable Bottom Stiffener and M&L for fixing New Bottom Stiffener of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 530x25x20mm

Back Rest/Stiffner Taking down old unserviceable Back Stiffener /Rest and M&L for fixing New Back Stiffener/Rest of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. of size 50x15x470mm cut out of 50x35x470mm

Bracket : S&F new bracket triangular shape made out of 1st class hard wood where required with 02 Nos steel screws duly polished to match the existing Chair of size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes: Taking down old/worn out rubber shoes and S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Re-caning Re- caning of Chair writing Godrej pattern with oval shape 2 mm wide new white plastic cane and 4mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Polishing : Polishing two coats to new and old surfaces of Chair writing after repair with french polish of approved quality after preparation of all surfaces .

Arms Rest: Taking down old unserviceable Arms Rest and M&L for fixing of existing size New arm rest made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 60x25x470mm.

CHAIR EASY FD-17(M),229 Rear Legs : Taking down old unserviceable Rear Leg and M&L for fixing of existing size New leg made out of 1st Class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 55x35x545mm

Front Legs: Taking down old unserviceable Front Leg and M&L for fixing New leg of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 55x35x545 mm

Side Rails of Seat: Taking down old unserviceable Side Rail and M&L for fixing New Side Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 55x40x575 mm

Front/ Back Rails of seat : Taking down old unserviceable Front or Back Rail and M&L for fixing New Front or Back Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 55x40x510mm.

Side Rail Back: Taking down old unserviceable Side Rail and M&L for fixing New Side Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 70x25x490mm.

Top/Bottom Rail of Back: -Taking down old unserviceable Front or Back Rail and M&L for fixing New Front or Back Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. of size 55x40x510mm

Front Support Rail : Taking down old unserviceable front support Rail and M&L for fixing New front support Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 70x25x490mm

Shoes :- Taking down old/worn out rubber shoes and S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Re-caning Re- caning of Chair Easy Godrej pattern with oval shape 2 mm wide new white plastic cane and 4mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Polishing : Polishing two coats to new and old surfaces of Chair Easy after repair with french polish of approved quality after preparation of all surfaces .

Arms Rest: Taking down old unserviceable Arms Rest and M&L for fixing of existing size New arm rest made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 65x25x610 mm.

BED HARD FD-240 & 246 TOP : Taking out of worn out plywood top from Bed Hard and S&F New Plywood top 12 mm thick , BWR grade ,ISI Marked confirming to IS-303 Make : Greenply/Archidply/Century in one piece, fixed with suitable screws complete, all as specified on drg and as directed by Engr-in-Charge of size ply 2100x900mm

Long Rail : M &L for replacement of old broken long Rail made out of 1st class hard wood. Rest all as per drg of size 1980x35x90mm.

Short Rail : Making short Rail from old broken long rail (obtain from Item No 4.01 above and fixing) all as per drg including taking down existing short rail of size 900x35x90mm

Legs : M &L for replacement of old broken legs made out of 1st nd class hard wood all as per drg of size 400x60x60mm

Head Board : Taking out all broken worn out component of head board and provide frame with 1st class hard wood and 4mm Teak wood face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed of size 900x440mm with soft wood battons 3 in Nos of size 22x75mm

Foot Board : All as per ser No 4.04 above but Foot Board of size 300x900mm with soft wood battons 3 in Nos of size 22x75mm

Steel bent clamp for corner :S &F MS clamp L shaped made out of 5mm thick mild steel flat iron of size 100x100x25mm including 2 coats of synthetic enemel paint over a coat of redoxide primer.

Polishing :- M & L for scrapping the wooden surface of Bed Hard/Bed Newar smooth and polishing the same with high class french polish glossy finish after preparation of surface smooth

SIDE BOARD FD-26(M) & 284 Top : Taking down old u/s Top and M&L for fixing New Top made out of 18/19mm thick Prelaminated MDF Board , ISI marked complete all as specified in drg and as directed by Engr-in-Charge of size1220x445mm.

Legs : Taking down old u/s Leg and M&L for fixing New leg of existing size made out of 1st class hard wood all as specified in drg and as directed by Engr-in-Charge of size 125mmx45mmx45mm

Long Rail : Taking down old u/s Long Rail and M&L for fixing new Long Rail of existing size made out of 1st class hard wood all as specified in drg and as directed by Engr-in-Charge.of size 25x45x1120mm

Short Rail : Taking down old u/s Short Rail and M&L for New Short Rail made out of 1st class hard wood all as specified in drg and as directed by Engr-in-Charge of size 25x45x400mm

Shutter : - Taking down old worn out shutter and supply and fixing new shutter of existing size made out of 18/19 mm Prelaminated MDF board duly edging with 5 mm thick 1st class hard wood beading . Rest all as per drg of size 835mmx585mm

Drawer : Taking downg old worn out drawer from the side board and S&F new drawer of existing size made out of 1st class hard wood as specified in the drg and as directed by Engr in Charge of size 385x400x125mm sides of drawer 02 Nos of size 19x125x400mm of hard wood, bakc 19x25x385mm (HW) and front 19X125X385mm(MDF) bottom 6mm ply of size 385x400mm

Side LT/RT :- All as per Ser No 5.00 above but LT/RT side of Side Board of size 445x635mm.

Back :- Taking down old worn out Back from the Side Board and S& F new Back made out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge of size 1220x635mm

Knob : Ttaking out old worn out knob from the drawer of the side board and SF new knob of best quality approved by GE/Engr-in-Charge. Rest all as specified or as directed by Engr in Charge.

Polishing Polishing two coats to new and old surfaces of side board after repair with french polish of approved quality after preparation of all surfaces .

BIN SOILED LINEN FD 224 & 15(M) Top : Taking down old worn out top and S&F new top made out of 18/19 mm prelaminated MDF board, ISI marked duly edged with 5 mm thick teak wood beading . Rest all as specified in drg and as directed by Engr-in-Charge of size 900x450mm

Bottom : Taking down old worn out bottom from bins, S&F new Bottom made out of 12mm thick plywood BWR grade irrespective of what shown on drg. Rest all as specified in drg and as directed by Engr - in -Charge of size 900x450mm.

Sides : Taking down old worn out sides of the bins and S&F new sides made out of 6 mm thick commercial plywood BWR Grade. Rest all as specified in drg and as directed by Engr - in -Charge of size 410x450mm

Side LT/RT Caning :- Side Caning of Bin in Godrej pattern with oval shape 2 mm wide new white plastic cane and 4mm wide at the border as approved by GE including taking out old canning. Rest all as shown on drawing and as directed by the Eng - in - Charge.

Hinge :- Taking down old u/s Hinges and M&L for fixing New Hinges ISI Marked size 75mm complete. Rest all as specified in drg and as directed by Engr-in-Charg

Polishing :- -Polishing two coats to new and old surfaces of Linen after repair with french polish of approved quality after preparation of all surfaces .

STOOL DRESSING FD-282 & 27(M) Leg : Taking down old u/s Leg and M&L for fixing New leg made out of 1st class hard wood all as specified in drg and as directed by Engr-in-Charge of size 50x30x380mm

Side Rail : Taking down old u/s Rail and M&L for fixing side rail made out of 1st class hard wood all as specified in drg and as directed by Engr-in-Charge of size 25x50x450mm.

Stiffener : Taking down old u/s stiffener and M&L for stiffener made out of 1st class hard wood all as specified in drg and as directed by Engr-in-Charge of size 19x25x450mm.

Re-Caning : Re- caning of Stool dressing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 4mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Polishing : Polishing two coats to new and old surfaces of stool dressing after repair with french polish of approved quality after preparation of all surfaces .

TABLE WRITING FD -275, FD 33(M) & 249 Top : Taking down unserviceable top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board ISI Marked duly edging with 5mm thick teak wood beading all around the top complete. Rest all as per specfication in drg and directed by Engr in Charge of size 1145x600mm

Legs : Removing unserviceable legs from the table including supply and fixing new legs made out of 1st class HW complete in size 740x45x45mm. All as per specfication and directed by Engr in Charge of size 55x35x760mm

Long Rail : Removing unserviceable long rail from the table including supply and fixing new long rail made out of 1st class HW complete. All as per specfication and directed by Engr in Charge of size 1145x25x50mm

Short Rail : Removing unserviceable short rail from the table including supply and fixing new short rail made out of 1st class HW complete. All as per specfication and directed by Engr in Charge of size 600x25x50mm.

Central Stiffener : Removing unserviceable stiffener from the table including supply and fixing new stiffener made out of 1st class HW complete. All as per specfication and directed by Engr in Charge of size 1145x50x25mm

Drawer : Removing unserviceable old broken drawer and S & F new one, made out of 1st class Hard Wood. All as shown on drawing , as specified and as directed by Engr-in-Charge of size 510x405x80mm, sides of drawer 02 Nos of size 12x80x510mm of hard wood,back 12x80x405mm(HW) and front 12x80x405mm (MDF), bottom 6 mm ply of size 510x405 mm

Store Box (Back) : Removing old unserviceable back and replace with 6mm thick (BWR) commercial ply of size 405x640mm

Store Box (Side) : Removing old unserviceable side and replace with 18/19 mm thick prelaminated MDF board ISI Marked of size 600x640mm

Small legs : - Removing unserviceable legs from the table including supply and fixing new legs made out of 1st class HW complete in size 140x45x45mm. All as per specfication and directed by Engr in Charge of size 35x55x100mm

Shutter : Removing unserviceable shutter from the table and supply and fixing shutter made out of 18/19 mm thick prelaminated MDF board ISI Marked duly edging with 5mm thick teak wood beading all around. Rest all as per specfication in drg and directed by Engr in Charge of size 405x570mm

Polishing :- Polishing two coats to new and old surfaces of table writing after repair with french polish of approved quality after preparation of all surfaces .

Shoes : Removing old/worn out rubber shoes and S & F new rubber shoe of superior quanlity with steel plated screws of suitable size complete all as directed by Engr-in-Charge

TEAPOY FD-232, 34 (M) & FD 278 Top : Removing U/S top from the Teapoy and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size 600x450mm

Long Rail : Removing U/S long rail and S&F New Long Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 20x50x600mm.

Short Rail : Removing U/S short rail S&F New Short Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 20x50x450mm.

Stiffener : Removing U/S Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 600x20x50mm

Legs : Removing U/S Leg S&F New Leg made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 30x60x540mm

Shoes : Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing : Polishing two coats to new and old wooden surfaces of Teapoy after repair with french polish of approved quality after preparation of all surfaces .

TABLE CENTRE FD-235 29(M) & FD 274 Top : Removing unserviceable top from the Table centre and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size 900x450mm

Long Rail : Removing U/S long rail and S&F New Long Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 900x50x20mm.

Short Rail : Removing U/S short rail S&F New Short Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 20x50x450mm

Stiffener : Removing U/S Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 450x50x20mm

Legs : Removing U/S legs S&F New legs made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 30x60x400 mm.

Shoes : Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing :Polishing two coats to new and old wooden surfaces of Table centre after repair with french polish of approved quality after preparation of all surfaces .

PEG TABLE, FD-236, 25 & FD 277 Top : Removing unserviceable top from the Peg table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size 300x450mm.

Long Rail : Removing unserviceable long rail and S&F New Long Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 20x40x450mm

Short Rail : Removing U/S short rail S&F New Short Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 20x40x300mm

Stiffener : Removing U/S Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 20x40x300mm.

Legs : Removing unserviceable Leg S&F New Leg made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 385x45x45mm

Shoes : Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing : Polishing two coats to new and old wooden surfaces of Peg table after repair with french polish of approved quality after preparation of all surfaces .

TABLE DINING 6 PERSONS FD 273 13 M AND FD-329 Top : - Removing Unserviceable top from the Table dining 6 persons and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size 1500x900mm

Long Rail : Removing unserviceable long rail and S&F New Long Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 1500x25x100mm.

Short Rail : -Removing unserviceable short rail S&F New Short Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 900x25x100mm

Stiffener : Removing Unservceable Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 900x25x100mm

Legs : - Removing U/S Leg S&F New Leg made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 760x75x40mm

Shoes : Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing : Polishing two coats to new and old wooden surfaces of Table dining 6 persons after repair with french polish of approved quality after preparation of all surfaces .

TABLE DINING 8 PERSONS FD 273 AND FD-329 Top : Removing Unserviceable top from the Table dining 8 persons and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size 1800x900mm

Long Rail : Removing Unserviceable long rail and S&F New Long Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 1800x25x100mm.

Short Rail : Removing U/nserviceable short rail S&F New Short Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 900x25x100mm

Stiffener : Removing Unserviceable Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 900x25x100mm

Legs : Removing Unserviceable Leg S&F New Leg made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 760x75x40mm

Shoes : Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing : Polishing two coats to new and old wooden surface of table dining 8 persons after repair with French polish of approved quality after preparation of surface smooth

TABLE 3'X2' W/O DRAWERS FD-231, 42(M) & FD-223/284 Top : Removing Unserviceable top from the Table 3"x2" w/o drawer and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board , ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge Table 3'X2' W/O Drawer of size 900x600mm.

Long Rail : Removing Unserviceable long rail and S&F New Long Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 900x20x110mm

Short Rail : Removing Unserviceable short rail S&F New Short Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 600x20x110mm

Stiffener : Removing U/S Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 600x20x60mm

Legs : - Removing U/S Leg S&F New Leg made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 740x60x30mm

Shoes : Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing : Polishing two coats to new and old wooden surfaces of table3'x2' w/o drawer after repair with french polish of approved quality after preparation of all surfaces .

TABLE 3'X2' WITH DRAWER FD 231/223/42M/284 Top : Removing Unserviceable top from the table 3x2 with drawer and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size900x600mm.

Long Rail : Removing Unserviceable long rail and S&F New Long Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 900x20x110mm

Short Rail : : Removing Unserviceable short rail S&F New Short Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 600x20x110mm

Stiffener : Removing Unserviceable Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 600x20x60mm.

Legs : Removing Unserviceable Leg S&F New Leg made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 740x60x30mm

Shoes : Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing : Polishing two coats to new and old wooden surfaces of Table 3'x2' with drawer after repair with french polish of approved quality after preparation of all surfaces .

Drawer : Removing U/S old broken drawer and S/F new one made out of MDF board, ISI marked and 6mm thick plywood commercial BWR grade. Rest all as per specification given in the drawing and directed by Engr in Charge of size 300x110x400mm, sides & back of drawer of size 12x110mm alongwith track rails of size 30x25mm in section bottom 6 mm ply of size 300x400mm.

TABLE BED SIDE FD-248, 28(M) & FD-276 Top : Removing Unserviceable top from the Table bed side and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size 230x450mm

Side (LT & RT) : Removing unserviceable sides and S&F New sides made out of 18/19 mm thick pre laminated MDF board, ISI marked complete as specified of size 230x510mm

Back Ply wood - S&F back of Plywood 6.00mm thick, BWR grade including taking out unserviceable BACK, complete all as specified and as directed of size 450x510mm

Polishing : Polishing two coats to new and old wooden surfaces of Table bed side after repair with french polish of approved quality after preparation of all surfaces .

CHAIR WBB FD-56(M) /225 Rear Leg Taking down old unserviceable Rear Leg and M&L for fixing of existing size New leg made out of 1st Class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 890x55x30mm

Front Leg : - Taking down old unserviceable Front Leg and M&L for fixing New leg of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 460x55x30mm

Side Rail Taking down old unserviceable Side Rail and M&L for fixing New Side Rail made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 440x65x30mm

Seat Frame : Taking down old u/s Seat Frame and M&L for New Seat made out of 8mm thick BWR grade Plywood ISI Marked with stiffeners as required made out of 1stnd class H/W complete. All as specified in drg and as directed by Engr-in-Charge of size 20x25x440mm.

Bottom Stiffener :-Taking down old unserviceable Bottom Stiffener and M&L for fixing New Bottom Stiffener of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 440x25x20mm

Back rest Taking down old unserviceable Back Stiffener /Rest and M&L for fixing New Back Stiffener/Rest of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 50x15x405mm cut out of 50x35x405mm

Shoes: Removing old/worn out rubber shoes and S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Polishing Polishing two coats to new and old surfaces including seat of Chair wooden bottom after repair with french polish of approved quality after preparation of all surfaces .

SOFA SET 5 SEATER FD-281 & 373 Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 5 seater and S& F new front/ Rear leg made of 1st class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge of size 70x35x530mm

Back/Front Rail of single seater : Taking down old unserviceable back/front rail of single seater sofa and S& F back/front rail of single seater sofa made of 1st class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge of size 35x100x530mm

Battens of seat/Back : Taking down old unserviceable batterns of single seater sofa and S& F new batterns of single seater sofa made of 1st class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge of size 20x50x535mm

Arms : Taking down old unserviceable Arms of sofa set 5 seater and S& F new Arm made of 1st class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Cushion for Seat & back : Removing of existing U/S cushion from seat of sofa set 5 seater and S & F new foam cushion 100 mm thick 40 density Make : Kurlon/sleepwel with new Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality zip with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

Back/Front Rail of 3 seater :- - Taking down old unserviceable back/front rail of sofa set 3 seater and S& F new back/front rail of sofa set 3 seater made of 1st class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge of size 1590x35x100mm

Shoes : - Removing old/worn out rubber shoes and S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Polishing : Polishing two coats to new and old surfaces including seat of Sofa 5 seater after repair with french polish of approved quality after preparation of all surfaces

Cover Only for Sofa Set 5 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality zip with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)

TABLE CENTRE GLASS TOP TP Top: Removing old broken glass top and S&F new glass top 10mm thick of size 900x450mm duly polished the edges and fixed with neccessary accessories. All as specified and as directed by engr-in-charge.

Polishing : Polishing two coats to new and old surfaces of frame of the table after repair with french polish of approved quality after preparation of all surfaces

Legs Taking down old unserviceable Leg and M&L for fixing New leg of existing size made out of 1st class hard wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge of size 100x100x400mm

TABLE 900X900MM FD 88 (M) 291& 231 Top : Removing Unserviceable top from the Table 900x900mm and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size 900x900mm

Top Rail : - Removing Unserviceable lTop rail and S&F New Top Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 25x75x800mm.

Stiffener : -Removing Unserviceable Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 25x50x800mm

Legs : - Removing Unserviceable Leg S&F New Leg made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 50x50x760mm

Shoes : Ttaking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing : Polishing two coats to new and old wooden surfaces of Table 900x900mm after repair with french polish of approved quality after preparation of all surfaces .

TABLE OFFICE CLERK WOODEN DB 4120 Top : Removing Unserviceable top from the Table office clerk wooden and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board, ISI marked duly edging with 5 mm teak wood beading all around the top complete. All as per specfication in drg and directed by Engr in Charge of size 1200x610mm

Long Rail : Removing unserviceable long rail and S&F New Long Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 1200x25x50mm

Short Rail : Removing unservicewable short rail S&F New Short Rail made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 610x25x50mm

Stiffener :Removing unserviceable Stiffener S&F New Stiffener made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 610x25x50mm.

Legs : Removing unserviceable Leg S&F New Leg made out of 1st class hard wood complete all as specified and directed by Engr in Charge of size 55x35x760mm.

Shoes : Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing : Polishing two coats to new and old wooden surfaces of Table office clerks wooden after repair with french polish of approved quality after preparation of all surfaces .

CHARPOY WOODEN NEWAR FD 53(M) 39 & 227 Long Rail: Taking down old unserviceable long rail and M&L for new long rail of size 1980mm x 55mm x 55mm made out of 1st class hardwood as shown in the drawing

Short Rail: Making short rail as per drawing out of dismantled broken long rail obtained from item ser No 22.00 above including taking down unserviceable short rail.

Legs : - Removing Unserviceable Leg S&F New Leg of size 510mm x 70 mm x70 mm made out of 1st class hard wood complete all as specified and directed by Engr in Charge

Stiffener : -Removing Unserviceable Stiffener S&F New Stiffener of size 900mm x 50mm x 40mm made out of 1st class hard wood complete all as specified and directed by Engr in Charge

TOP: 12mm thick plywood commercial, BWR grade, duly fixed with the rails with 20 Nos steel chromium plated screws 25mm long for each charpoy all complete as specified and as directed.

M & L for polishing all exposed wooden component including all round beading (except plywood top) with desired coats of french polish to achieve the high glossy finish after necessary preparation of surfaces all complete as specified and as directed.

ALMIRAH STEEL MED & SMALL FD-243 67(M) & 1032 Shelf : Removing old worn out Shelf from the Almirah med steel and S&F of new shelf made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge of size 440x765mm.

Door : Removing old worn out Door from the Almirah med steel and S&F of new Door made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge of size 1170x385mm.

Locking device : Removing old worn out 3 way locking device from the Almirah medium steel and S&F of new locking device of best quality. Rest all as specified on drg and as directed by Engr in Charge.

Hinge: Removing old worn out hinge from the Almirah medium steel and S&F of new hinge of best quality size 75mm . Rest all as specified on drg and as directed by Engr in Charge.

Legs: Removing old worn out Leg from the Almirah steel med S&F of new leg made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge of size 100x440mm.

Lock: Removing old worn out lock from the Almirah med steel Supply and fixing of new lock ISI marked. Rest all as specified on drg and as directed by Engr in Charge.

Handle: Removing old worn out handle from the Almirah med steel supply and fixing of new CP handle 100mm long of best quality . Rest all as specified on drg and as directed by Engr in Charge.

Painting: Repair to almirah med steel by necessary denting to deshaped portions and greasing to hinges and M & L for removing /scrapping old worn out paint from the Almirah med steel by sand paper and painting with one coats of synthetic enamelled paint of approved shade and make over a coat of red oxide primer after preparation of surfaces. Rest all as specified in the drg or as directed by Engr in Charge.

ALMIRAH STEEL LARGE FD-243,1031 & FD-67(M) Shelf : Removing old worn out Shelf from the Almirah large steel and S&F of new shelf made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge.

Door : Removing old worn out Door from the Almirah large steel and S&F of new Door made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge.

Locking device : Removing old worn out 3 way locking device from the Almirah large steel and S&F of new locking device of best quality. Rest all as specified on drg and as directed by Engr in Charge.

Hinge: Removing old worn out hinge from the Almirah large steeland S&F of new hinge of best quality size 75mm . Rest all as specified on drg and as directed by Engr in Charge.

Legs: Removing old worn out Leg from the Almirah steel large S&F of new leg made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge.

Lock: Removing old worn out lock from the Almirah large steel Supply and fixing of new lock ISI marked. Rest all as specified on drg and as directed by Engr in Charge.

Handle: Removing old worn out handle from the Almirah large steel supply and fixing of new CP handle 100mm long of best quality . Rest all as specified on drg and as directed by Engr in Charge.

Painting: M/L for repair to almirah med steel by necessary denting to deshaped portions and greasing to hinges and M & L for removing /scrapping old worn out paint from the Almirah med steel by sand paper and painting with one coats of synthetic enamelled paint of approved shade and make over a coat of red oxide prime after preparation of surfaces. Rest all as specified in the drg or as directed by Engr in Charge.

CHAIR VERANDAH FD 256 FD 19(M) Taking down worn out plastic cane from Seat and Back of Chair Verandah and Re-caning with 4 mm wide half-round oval shape plastic cane to the frame. Make : Ajay/Maharashtra/aryan or equivalent . All Steel frame of the Chair Verandah shall be painted with a coat of synthetic enamelr paint white in colour. Make Asian apcolite/Berger paints of first grade after duly rubbed worn out old layer of painting. Rest All as specified and directed by Engr-in-Charge.

Welding of Legs :- M&L for spot welding the legs/other joints that have become loose of chair verandah duly rubbed to smooth the welded portion . Rest as directed by Engr in Charge.

Rubber Shoes : M&L for Replacement of rubber shoe with new hard rubber shoe of superior quality as required at site complete all as shown on drawing and as directed by Eng-in-Charge.

CHAIR CB STEEL WITH ARMS FD-75(M) Seat : M&L for removing unserviceable seat frame, S&F new seat frame made out of 1st class hard wood fixed with 04 Nos. of machine screws 75 mm x 3 mm including caning with superior quality of plastic cane 2 mm half round oval shape for seat and 4 mm for border complete including polishing black colour on seat frame all as specified on drg and directed of size 535x560xmm with frame section of size 20x50mm

Back :- - Removing unserviceable back frame, S&F new back frame made out of 1st class hard wood fixed with 04 Nos. of machine screws 75 mm x 3 mm including caning with superior quality of plastic cane 2 mm half round oval shape for seat and 4 mm for border complete including polishing black colour on seat frame all as specified on drg and directed of size 535x560mm with frame section of size 20x50mm

Caps :- Supply and fixing of New PVC cap at the top of back steel pipe including taking down crusting PVC cap.

Flat Iron Runner: Removing of old u/s flat iron runner, S&F of new flat iron runner of size 25 x 3 mm including one coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed..

Rubber Shoes: Replacement of old u/s rubber shoe with new hard rubber shoe of superior quality with steel screws as required at site complete all as shown on drawing and as directed by Eng-in-Charge.

Painting chair With Arm M&L for painting to all exposed steel surfaces of Chair CB steel with Arms, with one coat of synthetic enamel paint including preparation of surfaces complete all as specfied on drg and directed.

Arms Rest : Removing of old U/s arms , S&F of new arms rest of 1st class hard wood,fixed with suitable size of screws complete including polishing with black colour. Rest all as specified on drg and directed.

CHAIR CB STEEL WITHOUT ARMS FD-75(M) Seat : Removing unserviceable seat frame, S&F new seat frame made out of 1st class hard wood fixed with 04 Nos. of machine screws 75 mm x 3 mm including caning with superior quality of plastic cane 2 mm half round oval shape for seat and 4 mm for border complete including polishing black colour on seat frame all as specified on drg and directed of size 485x605mm with frame section of size 20x50mm.

Back :--Removing unserviceable back frame, S&F new back frame made out of 1st class hard wood fixed with 04 Nos. of machine screws 75 mm x 3 mm including caning with superior quality of plastic cane 2 mm half round oval shape for seat and 4 mm for border complete including polishing black colour on seat frame all as specified on drg and directed of size 485x605mm with frame section of size 20x50mm

Caps. - Supply and fixing of New PVC cap at the top of back steel pipe including taking down PVC cap.

Flat Iron Runner: - Removing of old unserviceable flat iron runner, S&F of new flat iron runner of size 25 x 3 mm including one coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed..

Rubber Shoes: -Replacement of old unserviceable rubber shoe with new hard rubber shoe of superior quality with steel screws as required at site complete all as shown on drawing and as directed by Eng-in-Charge.

Painting chair without Arm : -M&L for painting to all exposed steel surfaces of Chair CB steel without Arms, with one coat of synthetic enamel paint including preparation of surfaces complete all as specfied on drg and directed.

TABLE DINING ORS FD-165 (M) Top : Removing U/S old top of table Dining and supply and fix new top, made out of 18 mm thick decorative pre-laminated MDF board, ISI marked of approved shade and make with 6 mm TW beading all around. All as specified & directed of size 1500x450mm

Legs :Removing old Broken/worn out legs of the table and S&F with new leg 25 mm square pipe/20mm dia pipe 1.6mm thick. Rest all as specified on drg and as directed by Engr-in-Charge of size 760 mm in height.

Replacement of long rail of table dinning ORs . Removing old Broken/worn out long rail of the table and S&F with new leg 25 mm square pipe/20mm dia pipe 1.6mm thick. Rest all as specified on drg and as directed by Engr-in-Charge of size 1400mm in length.

Replacement of short rail of table dinning ORs . Removing old Broken/worn out Short Rail of the table and S&F with new leg 25 mm square pipe/20mm dia pipe 1.6mm thick. Rest all as specified on drg and as directed by Engr-in-Charge of size 350mm in width.

Replacement of side stiffner of table dinning ORS: Removing old Broken/worn out stiffener of the table and S&F with new 25mm M.S square/round pipe 1.6 mm thick including welding etc.complete all as directed by Engineer-in-charge of size 350mm

Replacement of central stiffner of table dinning ORs . Removing old Broken/worn out central Stiffener of the table and S&F with new 25mm M.S square pipe 1.6 mm thick including welding etc.complete all as directed by Engineer-in-charge of size 350mm

Painting of Table Dinning ORs .M &L for preparation of old painted surfaces by removing old painting from the steel frame and painting the same including new surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed by Engineer-in-charge.

CHAIR COMPUTER AND CHAIR REVOLVING(TP) Repairs to Chair computer/Visitor and Chair Revolving Various types comprising of the following items all as specified and directed by the Engr-in-charge (a) Seat :- Removing the existing old unserviceable Fabric/Tapestry cloth from the chair and re-upholestering with new tapestry/Fabric cloth of approved quality after providing layer of 25mm synthetic foam of size 510x470x60mm

Back :- Repairs to Chair computer/Visitor and Chair Revolving Various types comprising of the following items all as specified and directed by the Engr-in-charge of size 510x620x60mm (a) Back :- Removing the existing old unserviceable Fabric/Tapestry cloth from the chair and re-upholestering with new tapestry/Fabric cloth of approved quality after providing layer of 25mm synthetic foam.

Castor Wheel :- Removing the existing unserviceable or broken castor wheel. Supply and fixing of New Castor wheel to the chair in suitable pattern/model to match the original.

Handle :-Removing the existing u/s handle from the chair. S&F of new handle to the chair in suitable pattern/model to match the original.

Bottom Base :-Removing the existing unserviceable or worn out bottom base from the Chair. Supply and fix new Base to the chair in suitable pattern/model to match the original.

Gas lifting Hydrolic System :-Removing the existing unserviceable Gas lift Hydrolic System of various types from the Chair. Supply and fix new Gas lift Hydrolic System to the chair in suitable pattern/model to match in original.

TABLE COMPUTER GODREJ (TP) Removing U/S old top of table computer and supply and fix new top , ISI marked made out of 18 mm thick decorative pre-laminated MDFboard of approved shade and make with 6 mm TW beading all around (size of top 900x562mm) all as specified & directed.

Removing old U/S keyboard tray from table computer and supply and fix new tray made up of 18 mm thick decorative pre-laminated MDFboard of approved shade and make with 6 mm TW beading all around alongwith telescopic channels of best quality. Rest all as specified and as directed of size 450x300mm

Removing old U/S CPU Stand from table computer and supply and fix new CPU Stand made up of 18 mm thick decorative pre-laminated MDFboard of approved shade and make quality with 6 mm TW beading all around of size 450x470mm.

Removing the existing unserviceable or broken castor wheel. Supply and fixing of New Castor wheel to the table os suitable pattern/model to match the original.

CHARPOY GI PIPE FD-220 Long Rail: S & F long rail 32mm bore Galvanized Iron (GI) Pipe medium grade with necessary threading of both ends all as per drawing including dismantaling unserviceable long rail complete all as specified and as directed of size 1980mm

Short Rail: Cutting and providing new threading to old 32 mm bore damaged long rail obtained from ser item No 31.00 above into short rails as per drawing & fixing the same in position including taking out old damaged short rails/legs complete all as specified, as shown on drawing and as directed.

Legs: Cutting and providing new threading to old 32 mm bore damaged short rail obtained from ser item No 31.00 above into legs as per Drg and fixing the same in position including taking out old leg complete all as specified, as shown on drawing.

S & F 12mm thick (7 ply) plywood BWR grade conforming to IS 303, ISI marked of size 1.98m x0.9m in single piece including providing of 02 Nos of stiffeners of size 900mm x 25 mm x 25 mm made of square pipe with required shape fixing with long rails with the help of MS Flat iron clit of size 75mm x 25mm at an appropriate distance so as to fit tightly against the inner pipes of both long rails at an equal intervals to provide more strength to hard top with making necessary holes or perforations shall be made in GI pipe (03 holes on each long rails and 02 holes on each short rails and fixing with counter shunk screw 65 mm long. Corners of plywood shall be rounded off and suitably hole with rose bit to prevent head of nuts/bolts from protruding out with all four corners bottom of plywood to which chiseled/ suitably sheared off to be extent to ensure housing raised portion of elbow and check nuts if required to make the ply wood sit flat on long rails evenly throughout, including removing of old, worn out nylon newar from existing charpoy GI pipe. Remaining details complete all as specified and as directed. (Make of ply: Century / Greenply) Painting the square pipe with black paint (i.e two coat) after applying the primer (Make of paint Nerolac / Asian)

S&F GI 3 way elbow suitable for 32 mm bore GI pipe of ISI marked including dismantaling unserviceable one. complete all as specified as directed and as shown on drawing.

S&F 1st class hard wood (Teak wood) block fitted with steel chromium plated screw all as shown on drawing including dismantaling unserviceable one complete all as specified and as directed.

S&F 6 mm thick GI check nut of ISI marked including dismantelled unserviceable nuts complete all as specified and as directed and shown on drawing.

CHAIR CBA SPL WITH HAND REST FD-260/FD-120 Removing old broken/worn out legs and S&F new legs made of square pipe tube 20mm x 20mm having minimum wall thickness 16 gauge not exceeding 30cm long by welding including applying one coat of red oxide zinc chrome primer including dismantaling unserviceable material complete all as specified and shown on drgs..

Writing Board: S&F Writing board of size 500x250x18mm made with 18mm thick MDF board ISI marked of approved shade and make as per original position to the chair.

Seat : Removing unserviceable seat frame, S&F new seat frame made out of 1st class hard wood fixed with 04 Nos. of machine screws 75 mm x 3 mm including caning with superior quality of plastic cane 2 mm half round oval shape for seat and 4 mm for border complete including polishing black colour on seat frame all as specified on drg and directed of size 20x50mm

All as per item No.32.02 above but back of chair of size 20x50mm

Replacement of PVC Cap as approved one complete all as specified and shown on drgs.

Painting M&L for painting to all exposed steel surfaces of Chair CBA Spl with hand rest, with one coat of synthetic enamel paint including preparation of surfaces complete all as specfied on drg and directed.

CHAIR CANTILEVER PADED SEAT AND BACK (TP) S&F new conduit steel tube 25mm dia of having minimum wall thickness 16 gauge not exceeding 30cm long by welding including applying one coat of red oxide zinc chrome primer including dismantaling unserviceable material complete all as specified and shown on drgs

S&F new seat of chair cantilever as per existing size and design duly padded and upholstery including dismantaling unserviceable seat complete all as specified and shown drgs of size 500x480x75mm

S&F new back rest of chair cantilever as per existing size and design duly padded and upholstery including dismantaling unserviceable back rest complete all as specified and shown on drgs of size 500x480x75mm

S&F new hand rest of chair cantilever as per existing size and design duly padded and upholstery including dismantaling unserviceable hand rest complete all as specified and shown on drgs

S&F new PVC shoe of chair cantilever as per existing size and design duly padded and upholstery including dismantaling unserviceable hand rest complete all as specified and shown on drgs

S&F new PVC cap of chair cantilever as per existing size including dismantaling unserviceable cap complete all as specified and shown on drgs

M&L for Preparation of old painted steel surface of any description and applying one coats of synthetic enamelled paint to chair cantilever padded complete all as specified and shown on drgs

CHAIR DINING WITH PADED CUSHION (CWE FUR/30/10) M&L for First Class H.W. for the following Components including dismantling unserviceable one. described here-in-above including applying one coat of wood polish complete all as specified and shown on drgs CWE/FUR/30/10. Front leg of size 50mm x 35mm x 460mm

All as per item No.34.00 above but Rear leg of size 60 x 35 x 900mm

All as per item No.34.00 above but Rear rail of size 70 x 25 x 450mm

All as per item No.34.00 above but Front rail of size 50 x 25 x 450mm

All as per item No.34.00 above but Stiffener of size 25 x 20 x 450mm

All as per item No.34.00 above but Wooden bearer of size 20 x 20 x 450mm

All as per item No.34.00 above but replacement of seat made of 12mm thick plywood commercial BWR grade type BB with 75 mm thick foam cushioned 32 density with tapestry cloth cover not less than Rs.350/- per meter and approved by Accepting Officer.

Replacement of PVC shoe complete all as specified and shown on drgs CWE/FUR/30/10.

Polishing Polishing two coats to new and old surfaces of Chair Dining padded with cushioned after repair with french polish of approved quality after preparation of all surfaces .

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. .

UNISON CONSTRUCTION

M/S BENGAL ENGINEERING ENTERPRISES

RABI BANIK

RAMKRISHNA NARAYAN ROY & CO

SREE SWAPAN KUMAR GHOSH

M/s Chakraborty Enterprise

M/S ALPHA BETA CONSTRUCTION