Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹5.0 LAccepted-AOC HIMACHAL PRADESH HP | l1 | Accepted-AOC l1 | |
| 2 | l2₹5.1 L+₹7,386.47 (1.47%)Rejected-Finance R O VILLAGE KHAJJIANA P O BAHINA TEHSIL BARSAR DISTRICT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | l2 | Rejected-Finance l2 | |
| 3 | Rejected-Technical VILL RAKRIAL PO JHANIARA TEHSIL DISTT HAMIRPUR HP | - | Rejected-Technical Rejected |
Tender Value
₹4.9 L
EMD Value
₹10,000
Closing Date
10 Apr 2026, 10:30 amClosed
EE Hamirpur
EE Hamirpur
SH Repair of Cupboard other minor repair in TypeIII Quarter No 1 to 4 in HPPWD Colony Hamirpur
2026_PWD_133333_6
EE Letter No 19896-19935 dated 30-03-2026
Open Tender
Civil Works
Percentage
30 days
Hamirpur
Please refer Tender documents.
13 documents required · 13 mandatory
₹350
₹10,000
9 May 2026
4 Apr 2026
10 Apr 2026
4 Apr 2026
10 Apr 2026
4 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/HINDALCO/BALCO for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 (Fifteen) micron) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | |||||
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/HINDALCO/BALCO for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 (Fifteen) micron) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 1 | Per Kilogram | - | - |
| 3Providing and fixing 12mm (Twelve millimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board HDMR conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera Pre-laminated particle board with decorative lamination on both sides (Action Tesa,Century Ply,Green ply,Kit ply make ) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | |||||
| 4Providing and fixing 18mm (Eighty millimetre) Pre-laminated flat pressed three layer (HDHMR) particle board or graded wood particle board IS : 3087 marked of Action TESA / Green Ply/ Kit Ply/ Century Ply make with one side decorative and other side balancing lamination Grade I, Type II interior grade IS : 12823 marked in Shelves with screws and fittings wherever required, edges to be painted with polyurethane primer including all fittings complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | |||||
| 5Providing and fixing 300x16 mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | |||||
| 6.01 | Providing and fixing 200x10 mm (Two hundred into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | - | Each | - | - |
| 6.02 | Providing and fixing 150x10 mm (One hundred fifty into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | - | Each | - | - |
| 7Providing and fixing 125 mm (One hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | |||||
| 8Providing and fixing 150 mm ( one hundred fifty ) bright finished floor Brass Door Stopper with rubber cushion, necessary brass screws etcetra to suit shutter thickness complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | |||||
| 9Providing and fixing 40mm ( Sixty five millimetre) special quality bright finished brass cupboard or ward robe locks (Link/Godrej) with four levers of approved quality (including necessary screws etcetera complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
PWDColony.pdf
Tender Documents • 4.71 MB
BOQ_197165.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .