Provision of Internal and External electrification arrangements, Lift and Generator arrangements to the newly Constructed Integrated Office Building for Registration Department at Krishnagiri in Krishnagiri District

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) (SD-281)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End(SD-283)

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End. (SD-298)

Supply and fixing of 1no 6A/ 16A two Module socket with 1No 16A 1Module switch with module cover plate [plastic] on suitable module concealed box [GI] in flush with wall with connections. (SD - 401)

Supply and fixing of 3 Nos. 6A modular 5 pin socket with 3 nos 6A one modular switch with modulecover plate[plastic] on suitable Module concealed box[GI] in flush with wall with conections Higher End.(For Computer Plug Socket) . (SD-389)

Supply and fixing of 3Nos. 6A module socket, 1 no 6A/16 A two module socket, 3 nos 6A one module switch , 1 no 16A one module switch with module cover plate [plastic] on suitable module concealed box [GI] in flush with wall with connections.Higher End .(For Computer Plug Socket) (SD-437).

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection.[For AC Plug] [SD-144]

Supply and fixing of 9W LED bulb for BH point. [DATA -1]

Supply and fixing of 4'20W LED Tube light fitting with Batten (Make : Higher End) with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting.(DATA-2)

Supply and fixing of single box type 4'20W LED fitting complete with conduit pipe suspension from the ceiling with 20 W LED TubeLight (Double Side) with PVC unsheathed FRLS copper leads from terminals to the fitting. (DATA-3)

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.(SD-439)

Supply and fixing of 1200mm (48") sweep BLDC ceiling fan complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp (DATA-4)

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. [SD-114]

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan. [SD-120]

Supply and fixing of AC/DC 76MM Buzzer /call bell suitable for 230volts 50c/s single phase AC supply on suitable TW board with push switch. [SD-105]

Supply and fixing of 48W LED street light fitting) complete with 32mm dia GI pipe (Class ‘B’) with 1 No. 32mm GI bend complete on the existing post with PVC unsheathed copper leads MS clamps and aluminum painting. (SD-448]

Supply and fixing of 7segment 6way TPN MCB sheet steel distribution board (Higher end) with metal/ acrylic door cover flush type/ surface type fitted with busbars and neutral links with single/ three phase MCB outgoings and seperate 4way provision for accomodating one no. 4pole incoming MCB/ Isolator and another seperate 4way provision for accomodating one no. 4 pole ELCB/ RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB/ Isolators (totally 18nos) 63A FP MCB - 1 no Incoming, 63A FP 30ma ELCB 1 Nos, 63A DP ISolator-3 No and 24 Nos. 6A to 32A SPN MCB as Outgoing .for sub incomers in 3segments with lable holder and provison for taking up cable for size not less than 35sq.mm. with the following in flush with wall with earth connection only. (power)DATA-5

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.i)32A 4P MCB - 1 no.ii)32A DP RCCB/ELCB 30mA -3 nos.iv)6A to 32A SP MCB - 12 nos DATA-6

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Double door Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. SD-514]

Supply and fixing of 4 way Vertical type triple pole neutral MCB sheet steel enclosure distribution board with double door [metal] with 1 No 63 A 4pole MCB switch as incoming and 2Nos 32A TPN MCB, 6 Nos 6A to 32 A SP MCB Switch as Outgoing suitable trunking box MS cable entry boxes, and internal connections, on suitable angle iron frame work with earth connection only. The MCB DB and MCB's should be with ISI mark. Higher End] [power plug Tpn Db,Ac plugs] . (DATA-7)

Supply and run of 2 of 1.5sqmm PVC insulated SC unsheathed FRLS Copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sqmm Copper wire and making good of the concealed portion with suitable colour.[UPS Wiring ]. (SD- 55)

Supply and run of 2 of 2.5sqmm PVC insulated SC unsheathed FRLS Copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of2.5 sqmm Copper wire and making good of the concealed portion with suitable colour.[SD-337]

Supply and run of 2 of 4sqmm PVC insulated SC unsheathedFRLS Copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 Sqmm copper wire and making good of the concealedportion withsuitable colour.[power plugs + Lighting DB'S] [SD-57]

Supply and run of 4 of 6 sq. mm PVC insulated SC unsheathed FRLS Copper Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 Sqmm copper wire and making good of the concealed portion with suitable colour.(SD-63)

Supply and Run of 3 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour. (For Lift) DATA-8

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End(SD-373)

Supply and Fixing of 16A Two-way switch in suitable Modular type GI box on wall with suitable front cover plate with connection (Higher End) (For Lift well lighting Control) DATA-9

Supply and run of 4 of 16 sq. mm PVC insulated SC unsheathed FRLS Copper Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 Sqmm copper wire and making good of the concealed portion with suitable colour. [DATA- 10]

Supply and laying of 3 1/2 x 35 sq mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good [pump room ](SD -183)

Supply and clamping of 3 ½ x 35 sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps. [Lift line] (SD-201)

Supply and fixing of brass cable gland for 3 1/2 x 35 sqmm PVC armoured LTUG cable with earth connection .(SD-165)[pump,Lift line]

Supply and providing cable end termination of 3 ½ x 35 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (SD 214)[pump,Lift line]

Supply and laying of 31/2 x120sq mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD-187](Generator)

Supply and clamping of 3 ½ x 150 sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps. [SD-206]

Supply and clamping of 3½ x 120 sqmm PVC LTUG armoured LTUG cable on post or on wall in 50 Sqmm GI pipe with MS clamps. [SD-205 :980 +209 = 1189](For DG set)

Supply and clamping of 3 ½ x 185 sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps. [SD-207](For Eb supply)

Supply and fixing of brass cable gland for 31/2 x 120 sqmm PVC armoured LTUG cable with earth connection .[SD-169]

Supply and providing cable end termination of 3 ½ x 120 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (SD- 218)

Supply and fixing of brass cable gland for 31/2 x 150 sqmm PVC armoured LTUG cable with earth connection .[SD-170]

Supply and providing cable end termination of 3 ½ x 150 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (SD- 219)

Supply and fixing of brass cable gland for 31/2 x 185 sqmm PVC armoured LTUG cable with earth connection .[SD-171]

Supply and providing cable end termination of 3 ½ x 185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (SD- 220)

Supply and fixing of 5000 VA ONLINE (5.0 kVA) UPS system (48V DC) for commercial and industrial applications with 4No of 12V, 150AH, Exide IT 500 Tall Tubular batteries with 2 hours back up for mentioned capacity fully load operation with battery stand with wheel angle iron frame arranged with shelf and suitable colour painting & with the following Features. (1) Fully automatic change over (2) Over load indication-output cut off (3) On Inverter mode short circuit protection (4) Electronic trip for Low battery / auto release (5) Current & Voltage controlled Topology (6) Multiple PWM MOSFET / IGBT Topology and thyrister controlled (7) DC Volt meter AC Output meter (8) Harmonic distortion: 3 % for non linear load (9) Transient response: 2 % on 40 % step load Recovery time within 100msec (10) Out put power factor: 0.80 (11) Efficiency: 85 % to 95 % (12) Over load: 120 % for 10mints (13) Alarm for low battery / output high / over load / trip (14) Battery charging and discharging meter (15) AC load current and frequency meter (16) LCD Meter – static by pass switch (SR)

Supply and fixing of2000 VA ONLINE (5.0 kVA) UPS system (48V DC) for commercial and industrial applications with 4No of 12V, 150AH, Exide IT 500 Tall Tubular batteries with 2 hours back up for mentioned capacity fully load operation with battery stand with wheel angle iron frame arranged with shelf and suitable colour painting & with the following Features. painting & with the following Features. (1) Fully automatic change over (2) Over load indication-output cut off (3) On Inverter mode short circuit protection (4) Electronic trip for Low battery / auto release (5) Current & Voltage controlled Topology (6) Multiple PWM MOSFET / IGBT Topology and thirstier controlled (7) DC Volt meter AC Output meter (8) Harmonic distortion: 3 % for non linear load (9) Transient response: 2 % on 40 % step load Recovery time within 100msec (10) Out put power factor: 0.80 (11) Efficiency: 85 % to 95 % (12) Over load: 120 % for 10mints (13) Alarm for low battery / output high / over load / trip (14) Battery charging and discharging meter (15) AC load current and frequency meter (16) LCD Meter – static by pass switch

Supply and erection of 250Amps Capacity dust and vermin proof floor mounting cubical panel board fabricated out of 16 SWG MS sheet for outer body, stiffness and doors and with supply and fixing of following interior switches with centre bus bar chamber and vertical no of switches one over the other on both sides of bus bar chamber with cable adopter chamber of the extreme wnd of one side with two coats of quality paint over one coat of zinc oxide primer superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board affixed complete on base channel supports to satisfy the latest CEIG rules with the following switches confirming to IS specifications. 1) 250A FP switch disconnect tor fuse interior only with HRC fuses double break - 2 No 2)200 A TPN switch disconnect tor fuse interior only with HRC fuses double break -2 No 3)63 A TPN switch disconnect tor fuse interior only with HRC fuses double break -6 No

4) 32 A TPN switch disconnect tor fuse interior only with HRC fuses double break -3 Nos The bus bar chamber consist of 4nos. of 30mmx6mm Copper flat for three phases and neutral. The interconnection with the bus bars to the 250A SDF DB Switches with 30mmx6mm Copper flat,200A SDF DB Switches with 25mmx6mm Copper flat and that 63A SDF DB Switches and 32A SDF DB switches with No.8 SWG Copper Conduct tor the buses should be mounted on the SMC bus insulator at proper & sufficient spacing between the buses as per IE rules. The bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of 6mm thick as partition 2 runs of 1"x1/8" copper flat should be provided all around the panel for earth connection. Phase & Neutral copper buses should be provided with heat shrinkable sleeves using RYB & Black colours.. And Double earth connection to all the switches should be done using No.8 SWG Copper conductor

Indicator lamps should be provided with toggle switches & Bakelite fuse unit. The capacity of fuse switches, size and route location of the UG cable shall be superscribed on all the incoming and outgoing switches. The panel shall have one coat of red - oxide primer paint & two coats of synthetic enamel paint of approved colours, approved by the department officers and should be provided with danger board. The panel shall be mounted on 3” x 1 ½” x ¼” MS base channel provided all around the bottom of the panel. The whole arrangement shall be erected on a masonry pedestal to be constructed with suitable foundation with bolt and nuts, such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level (DATA-11)

Design, Engineering, Fabrication, Supply, Erection, Testing, Commissioning and handing over of 1 No 13 Persons capacity Passenger lift as per the following specifications 1.Location: Register Office Building , Krishnagiri 2.No.of lift: 1 No. 3.type of Lift: Passenger Lift, 4.Capacity of Lift: 13 Persons/ 884 kgs 5.Speed: 1.5 mtr/sec 6.Type of Drive:V3F Drive with enhanced ride 7.No.of Floors:GF+4 Floor(single Lading) 8.Total Travel:3.3Mtr X 5 Floor = 16.5 mtrs 9.Leveling accuracy : High level accuracy with smooth and jerk free stopping 10.Construction of car: No. 2 Hardened sheet High quality stainless steel car and hand rail Granite Flooring and perspex false ceiling. 11.Position of Machine: Directly above the lift well 12.No.of Landing entrances-5 NosNo.of Car entrance: 1No. one side open 14.Car entrance door: Power operated V3F Drive center opening sliding S.S Door

15.Landing Entrance door: Power operated V3F Drive center opening sliding S.S Door with provision for Emergency exit key at all landings 16.Lift well size : 2500 mm (wide)X 1900 mm (depth) 17.Lift pit depth:1600mm 18.Car size: 2000mm(wide) X1100mm (depth) 19.Car Clear opening : 900 mm wide x 2000 mm height as per 20.Lift Machine room size: Machine room 10X10 21.power supply:400/440V 3phases 50Hz AC supply for power and 230V 50Hz single phase power supply for light 22.Controls: Simplex collective control with/without attendant 23.Car fittings : LED lighting - 1No.300mm sweep cabin fan 24.Lift Well: RCC construction with brick masonry work to be constructed and electrical work 25.Indication:UP/DOWN digital direction and position indicator for all landings and inside the car 26.Emergency alarm bell: Battery operated bell to be provided with automatic charging device 27.Emergency Light: Battery operated light to be provided with automatic charging device

28.Fire man's Switch: To be provided at the GF 29.Minor Builder Works: To be provided by the Lift contractor 30.Scaffoldings:To be provided by the Lift contractor 31.Sill Angles and Facio plates: To be provided by the Lift contractor 32.Steel for Lift Machinery: To be provided by the Lift contractor 33.Servicing and Maintenance: Free comprehensive servicing and maintenance for one year guarantee period 34.Automatic Rescue Device: To facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under the voltage protection system etc. complete with all accessories 35.Provision for Intercom with phone: To be provided by the Lift contractor 36.Lift License: Preparation of Drawings payment of Inspection charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor 37.Floor position Announcer: To be provided by the Lift contractor

38.Special Features: a. Infra red door sensor with full height screen. b. Full width half height rear panel mirror. C. S.S.hair finish hand rail in car. B. Stainless steel signal features. e. Vandal proof SS buttton with SS cover. f. S.S.hair finish door frames for landing doors. g.V3F Door operator. h. Call register signal i. Stainless steel Facio plates for car operating panel. and landing fixtures. j. Steel ladder for lift machine room. k. ON/OFF switch for fan and light. l. Overload warning indicator with audio announcer. m.Voltage stabilizer for control circuit.

39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding units motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electromechanical locks emergency key side supporting angles motor overload protection devices final limit switch main suspension ropes counter weights lifting joist for mounting the machineries. 40.Guarantee :Guarantee atleast for one year for the materials and workmanship of equipments should be offered by the lift contractor department. 41.Site testing in accordance with IS 14665 should be carried out at the time of Handing over to the user department. 42.Supply operation and maintenance manual and necessary tools for operation and a set of spare parts required for one year.(SR)

Supply, erection, testing and commissioning of 2.0 TR (6000 K. cal/ hr) ABS plastic split type Air conditioner conforming to IS: 1391 (Part-2) 1992 with Amdt No.1 to 2 fitted with Rotary compressor operating on refrigerant R-22/ non- CFC suitable for wall mounting for operation on 230V, 50 HZ single phase AC supply with Five star rating as per BEE specification and capable of performing the functions of A) Cooling B) Dehumidifying C) Air circulation D) Filtering The installation works for the above split type A.C units includes the following. 1. Mounting / Fitting indoor and outdoor units at their respective locations. 2. Laying refrigerant pipeline of required length connecting not exceeding 6 meters distance and both units after drilling hole / holes in the wall if required. Thickness of the copper tubing shall not be less than 0.7mm. 3. Insulating the suction pipe with expanded polythene foam 5mm tubing. 4) Laying 15mm dia flexible PVC drain pipe to throw out the condensate water being formed with in the indoor unit. 5) Leakage testing the entire system unit.

6) Charging refrigerant gas in the unit. 7) Suitable electric wiring to be provided with 2.5 sq.mm PVC insulated copper wire between indoor and outdoor units upto 6 meters length and upto switch within 3 meters of location of indoor unit. (SR)[M-1985][Conference Hall]]

Supply and fixing of 5 KVA electronic automatic voltage stabilizer V. Guard make model VGS 400 with input range of 170-270V and out put range 200-240 V with high and low voltage cut off and 3 minutes time delay relay with demonstration..(SR)[M-1989]

Supply and fixing of wall clamp support for mounting outdoor unit of split type AC unit complete. (SR)[M-1991]

Supply and fixing of 5/8” and 3/8” copper pipes with insulation foam of 6mm thickness suitable for 2TR and 1.5TR split type AC unit[ Extra beyond 3meter supplied with AC unit].( SR)[M-1990]

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. [SD-211]

Supply and run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe concealed in wall ceiling and making good of the concealed portion with connection.(SD-371]

Supply and fixing of WT bulk head fitting with guard suitable for 9 W LED Bulb (SD-84]

Supply and fixing of 250A TPN Sheet Steel Double BreaK Switch with HRC fuse and Neutral on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD-639)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. (SD-76)

Supply and handing over of 1No. 125 KVA Diesel Generator set with AMF Panel of 0.80 PF Three phase 415 volts, 50Hz, 1500 RPM as detailed below : ENGINE : Water cooled diesel engine suitable for generator application with a shaft output of 156 BHP at 1500 rpm under NTP conditions as per CPCB IV+NORMS + BIS specifications / IS 10000. The engine shall comprise the following standard scope of supply. (Kirloskar / Ashok Leyland / Equivalent) 1. Dry type air cleaner. 2. Expansion bellow. 3. Radiator, Radiator fan and mounting. 4. Air to air charge cooler. 5. Exhaust gas turbocharger 6. Lube oil cooler and lube oil filter 7. Fuel filter ( pre and Micro ) 8. In - line mono - block fuel injection pump with Governor and fuel feed pump. 9. Electronic Governor 10. 12 Battery charging alternator 11. 12 Volt electric starter motor 12. Engine test certificate. 13. Residential Mufler 14. Fly wheel with starter ring.

ENGINE INSTRUMENT PANEL MOUNTED : Engine control panel consisting go ON / OFF / START key, Lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator. SAFETY SYSTEM OF ENGINE : The Engine shall trip for the following conditions with visual alarm device. 1. Low lubricating oil pressure. 2. High water temperature. 3. Vee - belt failure and over speed. The following visual indicator should also be provided low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load. II. ALTERNATOR : Alternator capacity of 125 KVA / 100KW, 3 phase, 415 volts, 0.8 PF, 4 wire self excited & self regulated design to run at 1500 rpm under NTP condition confirming to CPCB BS IV 5000/ IS 13364 (Part II) 1992 to be coupeld directly to the diesel engine and test certificate. Make : ( Kirloskar Green / Crompton )

ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction. Critical processes fo punching are done on CNC machines to maintain dimensional accuracy of holes within 0.1mm power coating is done after seven tank surface preparation process of sheet metal, canopy panel and doors shall have inside lining of Fire retardant foam 64 Kg / m3 density mineral wool of 100mm thickness as acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1mt. Distance shall be less than 75dBA average or as per CPCB norms. SURFACE TREATMENT PAINTING : The enclosure surface shall be suitable treated for degreasing, derusting and posphating. The canopies are passed through seven tank treatment throughly. for degreasing, derusting and posphating. The canopies are passed through seven tank treatment throughly.

ADDITIONAL FEATURES OF CANOPIES: Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting ribs / structure are used in canopies so as it give sturdiness and to reduce the vibrations of the DG sets if any WORLD CLASS COOLING PACKAGE : Canopies shall have cooling package for which it can also perform at 45 deg C ambient temperature. No grouting required on the ground, only a level surface capable of with standing the DG weight. Lifting hooks are provided for the acoustic enclosure which should be unloaded independent of the DG set. The genset base frame should be also provided with hooks for unloading.

FUEL TANK : The 350 Litres removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance. supply of fuel engine oil to run the genset on full load for 8 hours with necessary loading element Tools: Supply of tools like 15" cutting plier - 1No, Screw Driver 9" & 6" - 2No, DE Spanners (6Nos) - 1set, Adjustable spanner - 1no, 1/2 lb Hammer - 1No, Spanner for removing engine oil plug - 1No, Line Tester - 1No for the maintenance and operation of Generator set. BATTERY : 2Nos 12 Volts 150AH Battery.[SR][M-2333]

Supply and installation of exhaust piping of sufficient length with suitable MS pipe so as to extend outside the generator with necessary thermal insulation. (SR)[M2085]

Prepartion of site plan, physical layout, electrical line schematic diagram in 3 sets getting drawing approval from CEIG preparation of completion report, recitification report and arranging CEIG inspection and obtaining safety certificate preparation of 1 set of approved drawing and a copy of safety certificatge in a neat frame work tko be fixed in generator room and payment of CEIG inspectoion fees.

Erection,testing commissioning and handing over of Gen set : Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation for erection of 125KVA Diesel Generator set over the existing foundation and erection of generator set with proper alignment over the exisiting fountation to suit 125 KVA Genset fountation

Supply and fixing of 63 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuse double break (L&T/Siemens make) on suitable angle iron framework with MS cable entry boxes with earth connection only .[SD-631] (Pump room,Lift room)

Supply, Fabrication, Erection, Testing and commissioning of indoor dust and vermin proof four compartment CT Metering panel made up of 16SWG CRCA sheet of size 48" x 48" x 18" with necessary stiffner and provided with following arrangements. 1. Front open door for each compartment provided with sealed locking arrangement. 2. 6mm thick hylam sheet in metering compartment for fixing 3phase 415V 4wire 50Hz Digital Energy meter provided by TANGEDCO. 3. 3Nos 1.5" x 1/4" and 1" x 1/4" Copper bus bar on suitable bus support with 3Nos 500/5A CTs in bus bar compartment. 4. 3Nos 500A fuse unit & 1no 250A neutral link on 6mm thick hylam sheet in fuse comparment. 5. Fixing of control fuses and wiring with flexible PVC copper wire and LED Indicator arrangements. 6. 2Nos copper earth bus of 1" x 1/8" in the rear side. 7. Suitable MS base channel for mounting. 8. Viewing glass in the door for meter compartment. 9. Provision of cable entry and outgoing compartment. 10. Painting the panel with 2 coats of epoxy paint over one coat of red oxide. (DATA-11)

Supply and fixing of 3 phase 315 A aerial fuse unit for 3Nos. 315A fuse units (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable angle iron frame work the tapping pole with necessary clamps. (DATA-12)

Supply, Erection, Testing and commissioning of 200A END Feed unit with 200A 4P MCCB 50kA for 400A Rising mains.

Supply erection, testing and commissioning of 400A 3L+N+PE, Plug in TYPE, 415V 3 Phase and Neutral sandwich Aluminium bus bar rising main indoor type totally dust and vermin proof with Insl F with suitable GI enclosure of 1.6mm thickness with epoxy painting of RAL7032. Rising main shall be provided with double aluminium earth bus bar of capacity as per specification for the entire length and cost of earth bus bar shall be included. short circuited rating of 40KA for 1sec with necessary rigid hanger, spring hanger and wall support hanger. The detailed drawing shall be approved by the department before manufacturing. [Make: CPRI approved make]

Supply, Testing and commissioning of tap off boxes of the following rising main including interconnecting rising main of 125A 4P MCCB suitable for terminating with 3.5C x 70 sq.mm cable (Schneider / Legrend / L&T / Eqnt)

Supply and demonstration of safety accessories 2m x 1m Rubber Mat suitable for 11/22 KV installation confirming to IS.(SOR XIII- Part'M'8-M-1976)

Supply and demonstration of safety accessories Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

Supply and demonstration of safety accessories 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle.

Supply and fixing of32A DP MCB with FP Sheet Steel enclosure in flush with wall and making good of the concealed portion with earth connection (Higher end). DATA-14

Supply and fixing of 63A FP MCB with FP Sheet Steel enclosure in flush with wall and making good of the concealed portion with earth connection (Higher end).

RAJ SOLAR POWER AND ELECTRICAL SYSTEMS (BID ID -1403768)

KKP ELECTRICALS (BID ID -1404624)