COMPREHENSIVE REPAIR WORKS OF BR AND EM NATURE LIKE JOINERY PLUMBING FLOORING PLASTERINGREGULAR WELCOME MAINT ALONG WITH REPAIR REPLACEMENT OF BLDG REPAIR REPLACEMENT OF EM WORKS WITH ALL CONNECTED ACCESSORIES IN BLDGS OF ZONE II AT NS KARANJA

Amount

Notes : - (i) The is at Serial No.09 of TPP 2025-26 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. (iv)The Unit Rate quoted are deemed to include for the following and nothing extra will be paid for these works: (a). Supplying, erecting and use of scaffolding upto required height (max 25 to 30m) or upto 8th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge. (b). Supplying, erecting & use of temporary bamboo scaffolding around the building as required. The scaffolding is to be secured properly in position by bracings, ties clamps, etc. complete including providing and erecting working platform at all heights as required, including removal after completion of work all as per direction of Engineer-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for 20mm thick rendering in cement mortar 1:4 on external surface of brick wall or concrete surfaces using WPC @ 3% by weight of cement complete all as specified and as directed. Note: WPC shall be measured and paid separetely as supply only.

M&L for 15mm thick rendering in cement mortar 1:6 on internal surface of brick wall or concrete surfaces, complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on ceiling surface complete all as specified and directed.

Complete removal of existing treatment of walls plastered or unplastered, washing, rubbing down and stopping off painted surfaces complete all as specified and as directed.

M&L for applying wall care putty of minimum 1mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and as directed

Preparation of newly plastered surfaces and M&L for applying two coats of oil emulsion distemper on walls over a coat of suitable primer complete all as specified and as directed.

Preparation of old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and M&L for applying one coat of oil bound distemper (oil emulsion) on walls complete all as specified and directed.

Preparation of new plastered surfaces and M&L for applying three coats of white wash on ceilings complete all as specified and as directed.

Preparation of old surfaces of ceilings including cornices, etc and M&L for applying one coat of white wash complete all as specified and directed.

Preparation of old wooden surfaces of any description, not otherwise described, exceeding 10cm in width or girth and M&L for applying one coat of synthetic enamel paint on wooden surfaces, complete all as specified and directed.

Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and M&L for applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and directed.

Preparation of old steel and iron surfaces of any description exceeding 10 cm in width or girth and M&L for applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Preparation of old painted surfaces and M&L for applying one coat of cement base paint on walls complete all as specified and as directed.

Preparation of old concrete/Asbestos/ Cement/Plaster surfaces over 10cm width or girth, not otherwise described and M&L for applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old/ new Interlocking/floor/hardstanding surface of any descriptions and any position and M&L for applying one coat of floor guard paint complete all as specified and directed.

Preparation of new or old surfaces of exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance, etc, thereafter wash the surface with clean water & allow to dry, filling visible cracks/ joints by chemistic or equivalent crack seal caulking compound & allow to dry for 24 hours and M&L for applying a primer coat of chemistic prime M Seal (water base primer) and allow to dry for 6 hours including applying 02 coats of chemistik PDS-50 (WB high build anti caronatin coating cum waterproofing) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding for any height, covering etc complete all as per specified and directed.

Preparation of new surfaces and M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Preparation of old surfaces and M&L for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over complete all as specified and as directed.

Demolition of wall stone/brick masonry built in cement mortor including all quoins arches pillars etc, complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for injection chemical GLYPHOSPHATE (4% Concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and sparaying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the Plant / vegetation of following girth including penetrated roots complete including necessory scaffolding etc for plants / vegetation of size 0-20 cm girth complete all as specified and as directed.

S&F in repairs 600mm x 200mm Metallic/acrilic board fixing with SS screws (3 inch) to the existing wall, making good to the surface (Any height) incl bldg No & name as directed (Eg: BLDG NO P-0015) complete all as specified and as directed.

Removing, chipping and cleaning of existing loose and damaged concrete carefully by low impact high frequency hammer or by manual chipping without damaging the existing concrete including cleaning the surface by air jet and stacking and disposal of unserviceable materials outside the premises. Applying Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in two coats to the entire circumference surface of bars, providing, mixing and applying two component epoxy resin concrete bonding coat on prepared RCC surfaces prior to application of any type of repair mortar or microconcrete as per manufacturer's specification including cleaning of surface to remove all dirt, dust or any other impurities and M&L for providing Micro concrete M30 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete all as specified and as directed. Note: (i) Quoted rate includes for working at any height of bldg. (ii) Quoted rates include for use of required formwork.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each complete all as specified and as directed.

All as per BoQ Serial Item no.1.27 above but exc 1.50 Sqm n.exc 4 Sqm complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening incl easing, adjusting etc complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, etc complete all as specified and as directed. Note : The rate included for all hardware fitting as indicated in the item like dash fasteners, EPDM rubber, neoprene gasket, cleat angle, star lock, bearings, glazing clips, all beading for fixing glass panes/ paneling/ wiremesh, screws etc as required and no extra payment will be made.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, star lock, rubber beading all complete as per architectural drawings and the directions of Engineer-in-Charge. Note : The rate included for all hardware fitting as indicated in the item like dash fasteners, EPDM rubber, neoprene gasket, cleat angle, star lock, bearings, glazing clips, all beading for fixing glass panes/ paneling/ wiremesh, screws etc as required and no extra payment will be made on items mentioned.

S&F aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screw @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section around the opening, complete all as specified and as directed.

M&L for silicon gun paste around windows of area n.exc 1.5 Sqm each at any height of the building using any type of scaffolding/security equipment etc. complete all as specified and as directed

M&L for silicon gun paste around windows of area exc 1.5 Sqm but n.exc 4sqm each at any height of the building using any type of scaffolding/security equipment etc. complete all as specified and as directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing area in square nexc 0.50sqm each complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing area in square exc 0.50sqm each complete all as specified and as directed.

S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane complete all as specified and as directed.

S&F Aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide 4 to 6 nos glass complete all as specified and directed.

S&F 35mm thick 2nd class hardwood plain, framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces (size of rail and stile as per IS : 1003(Part-1)), kiln in seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass/gauge (without sash bar) edges of forming plain chamfered rounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a) complete all as specified and as directed.

M&L 2nd class HW, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chanbered, put together with glue pinned at joints complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at the site as per specification & shown in SSR Pt-I complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite)solid decorative type flush door shutter of size 20mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. Note: stainless steel butt hinges and necessary S S screws shall be paid measured separately.

S&F 200mm long and 10-15mm dia MS fasteners complete all as specified and as directed.

S&F MS works as in hold fasts, similar small articles confirming to Fe 290 Gde -E- 165 complete all as specified and as directed.

S&F MS butt hinges100mm long medium weight, cold rolled complete all as specified and as directed.

S&F in repairs repairs MS butt hinges100mm long medium weight, cold rolled complete all as specified and as directed.

S&F 100 mm long ,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F in repairs 100 mm long ,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F 125 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repairs 125 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repairs 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F in repairs 150mm long Aluminium,anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F 200mm long Aluminium,anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 200mm long Aluminium,anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs aluminium curtain rod with fixing brackets fixed with steel screws & PVC rawl plugs/ grips as required complete all as specified and directed.

S&F 04 pieces pulley operated cloth drying system consisting of aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 1.80 mtr with pully made up of devil mounted and fixed with selg tapping screw. Rope will be HDPE doble core of 4 mm with rope Guide at locking system to hiderope Channel to be dia of minium weight of pipe shall bot be less than 0.20kg/Rm and maximum weight of pipe in one unit not less than 2 kg weight of rope shall be not less than the 550 gms/ mtrs including taking down old unserviceable cloth hanger complete all as specified and as directed.

S&F in repairs 150 mm long hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws and fixed complete all as specified and as directed.

S&F in repairs 15mm bib taps, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 20mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and as directed.

S&F in repairs 15mm angle cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs 15mm dia stop cock fancy type, cast copper alloy, chromium plated, concealed type with long shank with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs chromium plated brass Bib cock, two way suitable for 15mm bore GI tubing and health faucet complete all as specified and as directed.

S&F in repairs Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe in sink/ wall mixer etc. complete all as specified and directed .

S&F in repairs covers for PVC overhead water tanks of 500 to 2000 ltr capacity (as per sample) complete all as specified and directed.

S&F in repairs Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified

S&F in repair Wash hand basin flat back 450mm x 300mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block with & including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and as directed.

S&F in repairs Jumper brass with rubber or leather washer for 15 mm dia bib cock / stop cock brass complete all as specified and directed

S&F in repairs spindle brass for 15 mm dia CP Bib cock/ stop cock/pillar cock/ Mixer (any type)/concealed cock of any pattern complete all as specified and directed

S&F in repairs sinks with drainage board overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed.

S&F in repairs sinks overall size 495mm x 420mm bowl size 410mm x 330mm x160mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding, waste fitting, waste pipe in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and as directed.

S&F in repairs stainless steel kitchen plate rack of size 600x600 and 1 mm thick (18 gauge) complete all as specified and directed.

S&F in repairs waste coupling 32 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repairs waste coupling 40 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repairs PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed .

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repairs PVC waste pipe 32 to 40 mm for WHB/Sink up to floor trap complete all as specified and as directed.

S&F in repairs brass chromium plated overhead shower 125mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed.

S&F in repairs Rotational moulded polythylene 500 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position with & including 1 No. PVC float valve 20 mm bore, high pressure with polythene ball & float complete all as specified and as directed.

S&F in repairs Rotational moulded polythylene 1000 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position with & including 1 No. PVC float valve 20 mm bore, high pressure with polythene ball & float complete all as specified and as directed.

S&F in repairs brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 100mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls complete all as specified and as directed.

S&F in repairs 100 mm bore Cast Iron Bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 75 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls complete all as specified and as directed.

S&F in repairs 75 mm bore Cast Iron Bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to wall/floors 110mm bore including suitable clamps etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius complete all as specified and as directed.

S&F in repairs 110 mm dia, PVC bend complete all as specified and as directed.

S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed

S&F PVC (SWR) branch piece double (double 'Y') equal or unequal 75mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowel 75mm bore complete all as specified and as directed.

Taking up or down 20mm dia of CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and as directed.

S&F 20mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings to walls with hooks, ceiling or laid on floor complete all as specified and as directed.

S&F in repairs PVC 10 litre capacity valve less syphonic action type, flushing cistern, low/high level, white/coloured with inlet ball valve, float and handle including brackets, etc. complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan, padestel pattern, white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with & including PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and as directed.

S&F 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors including taking down of existing pipe complete all as specified and directed.

S&F in repairs Chromium plated soap dish including fixing arrangement complete all as specified and directed .

S&F in repairs CI Floor trap long neck 75 mm dia, with & including stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.

S&F in repairs CI Floor trap long neck 100 mm dia, with & including stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.

M&L in repairs CI Nahani trap long neck 100 mm dia, with & including stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs PTMT cabinet with mirror of minimum size 848mm x 343mm x 250mm complete all as specified & directed.

S&F 150 mm dia round/square grating of CP with or without hole including Jointed to PVC pipe complete all as specified and as directed.

M&L for Petty repairs to wooden door, PVC door, cupboard door, wardrobe door with shutter (size not more than 2sqm) including roller, windows, etc with minor repair and easying and adjustment/alignment to openable with assessories if requred any ( like roller of cupboard door, butt hinge, handle, tower bolt, beading, bow handle, etc complete) complete all as specified and as directed.

M&L for Petty repairs to leakage of bib taps, pillar cock, wall mixer, basin mixer, sink mixer, stop cock, PVC connection, waste pipes, float valves, angle valve, concealed valve, GI union joints of pipe, re-fixing of bottle trap, etc. by changing the PVC washers/Sheet washers,spindle or any other minor accessories etc complete all as specified and directed.

M&L for Petty repairs to high or low level flushing cistern by adjusting the float valve, leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush complete all as specified and as directed.

M&L for Petty repairs to internal/external water inlet water pipe line including socket, elbow, nipple, with repair to water blockage, pipe line leakage including concealed water tubing etc of any height using scaffolding, complete all as specified and as directed.

M&L for Petty repairs to plain cement concrete type B1 (using 20mm graded aggregate) 1:2:4 in floor, column, beam, window cill, door cill, balcony rep etc area n. exc 1 sqm of any height of bldg using scaffolding including matching to existing surfaces complete all as specified and as directed.

M&L for Petty repairs as in 15mm thick cement plaster in CM 1:4 as in wall, ceiling, column, beam, window cill, door cill,balcony etc, area n. exc 1 sqm any height of bldg using scaffolding including matching to existing surfaces complete all as specified and as directed.

M&L for Petty repairs as in preparation of old distempered surfaces of walls to touch up paiting including washing, rubbing down and stopping of nail holes and applying one coat of oil bound distemper (oil emulsion) on walls in patches area exceeding 1.00 and n.exc 2.00 Sqm complete all as specified and directed

M&L for Petty repairs to wash hand basin, kitchen sink, kitchen slab, broken tiles using white cement and making good complete all as specified and directed.

M&L for Petty repairs to any type any size of balcony grill of any height including hand rail with cover of PVC including welding, dismentling, fixing in cement concrete in 1:2:4 and matching to existing surfaces complete using 16/20 mm square/round bar including painting to match with existing complete all as specified and directed .

S&F in repairs rubber beading suitable for fixing 4mm/5mm thick glass in aluminium window/doors. etc complete all as specified and directed.

S&F in repairs star lock for window incl all necessary fittings complete all as specified and as directed.

S&F in repairs aluminium windows bearing per windows complete all as specified and as directed.

Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

S&F Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 20mm thick screed in CM(1:4) complete all as specified and as directed.

M&L Non Skid ceramic coloured tiles7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment match the colour of tiles over & including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/ 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed.

M&L Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and including 20 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado, windowcills, and pillar etc., laid over and including 10 mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab including rubbing and polishing etc.complete all as specified and as directed.

M&L Machine cut cudappah stone slab 20-25mm thick over & including 20mm thick cement screed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking plaform, and other glazed similar situations complete all as specified and as directed.

M&L Boring holes through stone/tile lining for pipes, etc. n exc 50 mm dia and making good complete all as specified and as directed.

M&L for post ATT treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L for post ATT treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

M&L for Water proofing treatment to sunken floor of RCC slab with the following steps complete all as specified and as directed:-

M&L for applying first coat of chemical pidifin 2K (DR Fixit or equivalent) on cleaned plastered surfaces @ 0.86 kg/sqm (min) as recommended by manufacturers. Then Provide a layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as manufactures recommendations. After Apply second coat of chemical pidifin 2K (DR Fixit or equivalent) @ 0.86 kg/sqm (min) layer glass fibre mesh as recommended by manufacturers.

S&F Spouts of 50mm dia GI pipes projecting at least by 150mm clear of face of the outer wall.

M&L for 30 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate mixed with WPC @ 3% by weight of cement shall be provided on bottom (WPC shall be measured and paid separetely)

M&L for applying two coats of hot bitumen 85/25 grade @ 1.7 kg/sqm over vertical sides and floor of sunken portion.

M&L for filling the sunken portion with PCC 1:7:12 type F2 using 40mm brick aggregate after carrying out required test for joints/water proofing. Note: (BoQ Serial Item No.2.46 to 2.51):- (i)The treatment shall also be provided over side wall upto a ht of 150 mm above FFL (ii) Water proofing treatment will be carried out through authorised applicators approved by GE and testing charge included in item rate.

M&L 40 mm thick, Cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in floors finished even and smooth using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Demolition of cement oncrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggreagtes as in 75mm thick plinth protection/footpath, etc finished even & smooth using extra cement complete all as specified and directed

M&L for 100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar work complete all as specified and as directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hangidng or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing including dismantling of gate etc. complete conforming to Fe 410-w(Gde-E-250 quality) complete all as specified and as directed.

Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside MOD complete all as specified and as directed. NOTE :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.

M&L for Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with waters to remove dusts etc. complete all as specified and as directed.

M&L for Brushing neat cement slurry with 3kg/sqm complete all as specified and as directed.

M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and as directed.

M&L for 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished with WPC 3% by weight of total cement, complete all as specified and directed NOTE :- Integral WPC shall be measured and paid separately.

M&L for apply oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surfac complete all as specified and as directed.

M&L APP based polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surfaces by forced application method complete all as specified and as directed. NOTE: (i) Work shall be carried out by authorised applicator. (ii) Make of APP membrane & primer shall be same.

Preparation of new surfaces of any description not otherwise described over 10cm width or girth and M&L for applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces complete all as specified and as directed.

M&L for torching on joints (n exc 10cm) of old APP membrane sheet incl cleaning, brushing at joints and necessary repairs (incl suitable/items T&P/Gas cylinder) as required complete all as specified and as directed.specified and directed

S&F 30mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F in repairs 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs 12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs Corner Glass bathroom shelf with chrome rail, wall mounted, cleared tempered glass shelf/rack 200mm size complete all as specified and as directed.

M&L for Vitrified Ceramic tiles (dark shade) 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed.

M&L for Vitrified Ceramic tiles (dark shade) 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick backing coat in CM 1:4 to recieve tiles complete all as specified and directed.

E/M Works

Taking down carefully copper /aluminium point wiring (light, fan socket or power) through stove enamelled steel conduit/PVC conduits including complete fittings such as switches, ceiling roses, pendants, regulators, sockets,, switch sockets, electrical fittings etc removing and making good disturbed surfaces of walls/ceiling etc, complete all as specified and as directed.

M&L for point wiring fo light/fan/bell point controlled by 1 one way switch using 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked, PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping (ISI marked) of 25 mm wide double locking type including all accessories with & including PVC 1.5 Sqmm multi stranded insulated unsheathed FRLSH copper wire, ISI marked of green colour for continous earth, including sunken box made out of suitable thickness and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be concealled in wall, duly painted including 3mm hylum /masonite sheet cover, for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per approved colour code.

All as per BoQ Serial Item no.2.76 above but for One light point controlled by 2 way switch SP, 5 Amp, 240 Volts complete all as specified and as directed.

All as per BoQ Serial Item no.2.76 above but one 5 amp socket point on same board complete all as specified and as directed.

All as per BoQ Serial Item no.2.76 above but one 5 amp multi socket indepenedent complete all as specified and as directed.

All as per BoQ Serial Item no.2.76 above but using 2.5 sqmm (nominal area) multistranded FRLSH copper conductor cable/wiredsaz & 2.5 sqmm size FRLSH PVC insulated unsheathed copper conductor cable for earth continuity (green colour) for one 5 pin socket outlet 5/15 Amp multi purpose independent point controlled by 15 Amp switch, SP one way, 240 Volts & Socket, complete all as specified and directed.

All as per BoQ Serial Item no.2.76 above but using 4.0 sqmm (nominal area) multistranded FRLSH copper conductor cable/wiredsaz & 4.0 sqmm size FRLSH PVC insulated unsheathed copper conductor cable for earth continuity (green colour) for one 5 pin socket outlet 5/15 Amp multi purpose independent point controlled by 15 Amp switch, SP one way, 240 Volts & Socket, complete all as specified and directed.

S&F Switch piano type flush button type single pole one way 5/6 Amps 240V front operated complete all as specified and directed.

S&F Switch socket combination 2 in 1 3 pin, 5 A and 15Amp flush type universal complete all as specified and directed.

S&F socket 3 pin 5 A flush type complete all as specified and directed.

S&F Bell buzzer 240v 50hz complete all as specified and directed.

S&F Bell push 240v 50 hz complete all as specified and directed.

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals complete all as specified and directed.

S&F in repairs switch piano flush button single pole one way, 6 Amp complete all as specified and as directed.

S&F in repairs Switch socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and as directed.

S&F in repairs Socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and as directed.

S&F in repairs Switch bell push flush type 5 Amp complete all as specified and as directed.

S&F in repairs Switch socket combination outlet 15 Amp, 5-in-1, controlled by one switch complete all as specified and as directed.

S&F in repairs Switch flush button, single pole two way, 6 Amp complete all as specified and as directed.

S&F in repairs Socket type EME fan 5 step regulator switch/socket type for ceiling fan of suitable size, complete all as specified and as directed.

S&F in repairs Lamp holder/angle holder insulated body with black/white plate for batten fittings complete all as specified and as directed.

S&F in repairs modular step type fan regulator 120 watt ,AC, 220V, 50hz complete all as specified and as directed.

S&F in repairs modular switch 1 module 6 amp one way complete all as specified and as directed.

S&F in repairs modular switch 1 module 16 amp one way complete all as specified and as directed.

S&F in repairs modular socket 2 module universal type 5/6 amp one way complete all as specified and as directed.

S&F in repairs modular socket 2 module universal type 6/16 amp one way complete all as specified and as directed.

S&F in repairs modular bell push 6A 1 module complete all as specified and as directed.

S&F in repairs Bell buzzer, ding dong AC,230V, 50hz single pole complete all as specified and as directed.

S&F in repairs modular cover plates with frame up From 1 /2 to 3 module as per site requirements complete all as specified and as directed.

S&F in repairs modular cover plates with frame up from 4 to 12 module as per site requirements complete all as specified and as directed.

S&F in repairs modular metal flush box as per site requirements from 1/2 to 3 modules complete all as specified and directed.

S&F in repairs modular metal flush box as per site requirements from 4 to 12 modules complete all as specified and directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 4.0 Sqmm (with colour code), drawn in and including non metallic rigid PVC conduit of 25mm dia/casing capping/ suitable size , ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surfaces/ recess complete including taking down complete all as specified and as directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete including taking down complete all as specified and as directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 10.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 10.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete including taking down complete all as specified and as directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 4.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete including taking down complete all as specified and as directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete all as specified and as directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 10.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in complete including taking down complete all as specified and as directed.

M&L cutting of wall/ceiling/column for laying submain of any size including plastering ,white wash complete all as specified and as directed.

S&F in repairs LED building security light fitting with suitable size bracket/angle with three core flexible wire to fit security light of 45 w IP 66 protection LED complete all as specified and as directed.

S&F in repairs LED batten with 20/22W LED tube light approx 4 feet in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as specified and as directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 12 way double door open able, concealed on wall including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 8 way double door open able, concealed on wall including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way, concealed on wall including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F double door MCB VTPN DB 4 WAY made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way, concealed on wall including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F double door MCB TPN DB 4 WAY made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way, concealed on wall including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F in repairs 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs SPN 32 AMP MCB DP 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs LED recess/surface mounted 2x2 luminarie 36/40w fitting, 220 V, AC,50HZ suitable surge protection, high power factror,driver etc complete including flexible wire and connected accessories complete all as specified and as directed.

S&F in repairs LED Bulk head fittings 9/10W luminaire including LED light driver holder 220 V, AC,50HZ connecting up with three core flexible copper conductor calbe of suitable size complete with all acccessories complete all as specified and as directed.

S&F in repairs LED tube rod approx four feet 20 watt, 220V,AC,50HZ change with existing any tube rod including flexible wire and connected accessories complete all as specified and directed.

S&F in repairs Batten MS suitable for 18/22/24W LED rod 220V, AC, 50HZ with accessories including suitable 1.5 sqmm 2 core wire for connecting with ceiling rose complete all as specified and directed.

S&F in repairs LED batten 10w, 2 feet with LED tube light 220V, AC, 50HZ in wall/surface connecting with all required accessories like flexible cable from ceiling rose etc complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 100 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 125 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

M&L for daily complaint checking & repairing of DBs/meter panel board/circuits/submain wiring/switches/sockets etc and other connected work including rectification of faults complete all as specified and directed

S&F in repairs MCCB 4 pole, thermal magnetic release range 63 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 40 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

S&F in repairs three pin top of capacity 15 amp ,AC,220V complete all as specified and as directed.

S&F in repairs PCRD plug of capacity 15 amp, AC, 220V complete all as specified and as directed.

S&F in repairs GI sunken/terminal box of size approx 10cm x 10cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls complete all as specified and as directed.

S&F in repairs GI sunken/terminal box of size approx 15cm x 7.5cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls complete all as specified and as directed.

S&F in repairs GI sunken/terminal box of size approx 20cm x 15cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls complete all as specified and as directed.

S&F in repairs GI sunken/terminal box of size approx 20cm x 25cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls complete all as specified and as directed.

S&F in repairs emergency bulb LED 10W, 230V, 50Hz, with 2/4 hour backup complete all as specified and directed.

S&F in repairs RCCBs 63 Amps double pole 100mA breaking capacity complete all as specified and directed.

S&F in repairs RCCBs 40 Amps double pole 100mA breaking capacity complete all as specified and directed.

S&F in repairs decorative light suitable for holder B-22/E-27 complete all as specified and as directed.

M&L for taking out and refixing of tube light, mirror light etc after cleaning and any type and rectifiying defects complete all as specified and as directed.

S&F in repairs LED batten with 20/22W LED tube light (four feet) with sensor in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as specified and as directed.

S&F in repairs LED batten with 9/10 W LED tube light two feet mirror type with sensor in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as specified and as directed.

S&F in repairs LED batten with 20W LED tube light (four feet) with inverter type with 2 hrs backup in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as specified and as directed.

S&F in repairs LED bulb of 9/10 watt complete all as specified and as directed.

M&L servecing and cleaning of geyser of any capacity including taking out from existing position and refixing complete all as specified and as directed.

M&L checking ceiling fan of size 1200/1400mm and change defective part cotter pin/ nut bolt etc complete all as specified and as directed.

M&L for earthing with GI earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) type B1 using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering, 40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point including testing on completion and taking down old u/s materials complete all as specified and directed. NOTE: (i) The earth chamber shall be constructed 0.50m away from the edge of earth pit and the cost of the same is deemed to be included in quoted unit rate. (ii) GI Strip and protection pipe upto 7.5m is deemed to be included in the quoted unit rate. (iii) GI watering pipe upto 1.2m s deemed to be included in the quoted unit rate.

S&F in repairs GI strip 32mm x 6 mm saddle in wall for loop earthing and ground grid complete all as specified and as directed.

S&F in repairs fan rod of size 1/1.5 feet suitable for mounting ceiling fan of size 1200/1400 mm complete all as specified and as directed.

S&F in repairs flexible wire 1 sqmm X 2 core complete all as specified and as directed.

S&F in repairs Round/square type, recessed /surface 12W/14W warm white LED downlight dimmable with high lumen 230V complete all as specified and as directed.

S&F jointing, connecting & testing 10 sqmm X 2 core, XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor as in saddle on wall, in trenches / ducts/ of the including taking out cable cover & cable complete all as specified and as directed.

S&F in repairs modular type AC box with three pin socket and plug top and 20 amp single pole MCB complete all as specified and directed .

S&F in repairs two way sheet metal enclosure with three pin socket and plug top and in cuding 1 No. 20 amp single pole MCB complete all as specified and directed .

Advait Enterprises (BID ID -3348615)

OM ENTERPRISES (BID ID -3345342)

M/s PIONEER CONTRACTORS (BID ID -3347133)

venus enterprises (BID ID -3347675)

EVEREST CONSTRUCTION (BID ID -3348286)

DIGITAL SERVICES (BID ID -3348490)