Improvements to drains,CC Road and other Allied works in 17, 56, 55, 41.1, 27, 22.1, 20, 24, 27, 25.2, 25.1, 26, 28 in Gandhinagar Sub Division

Improvements to drains,CC Road and other Allied works in 17, 56, 55, 41.1, 27, 22.1, 20, 24, 27, 25.2, 25.1, 26, 28 in Gandhinagar Sub Division

Removing and Refixing stone slabs of drains and pointing in C.M(1:3)Data rate

Dismantling of Structures,Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P an...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

Providing & laying precast drain cover slab of 230 mm thickness in CM 1:3 including cost of all materials, labour, curing, transportation, loading, unloading etc, complete as per the directions of the...

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Crack Groove Cutting: Groove shall be cut using hand held electrically operated concrete cutting machine of size of 50 mm

wide and 75 mm deep on each side of the crack to form as "V" groove all along...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and ...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)Complete as per the direction of the Engineer in-charge

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, includi...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 &

IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3

fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces .Complete as per the direction of the Engineer in-charge

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel,...

Providing and fixing Mangalore tile roofing using first class tiles with necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafters includin...

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...

Fabricating, providing and erecting in position of MS. Hot dip galvanized Sq. Hallow Poles of 132*132 Heavy gauge of length 3000mm with MS. Hot dip galvanized grill work as per approved design and dra...

Fabricating, providing and erecting in position Hot dip galvanised Gate. Using 72*72*4.8mm Sq. GI Pipe frame with top pipe bending in heavy duty hydraolic press with sand packing and hot bending to fo...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Mini Ski: All tubular steel of 2.5MM thickness are galvanized and zinc dipped. All welded joints are scalloped as necessary and welded. All welds are dressed off removing all sharp edges and burrs Bea...

Squat pushing (Leg Press) Area - 3' x 4', Height - 7' Supply & Fixing of HD Squat Pushing. Metal: All tubular steel of 2.5MM thickness are galvanized and zinc dipped.. All welded joints are scalloped ...

Spinner (Fun Steering) (Area-2'x 2', Helght-4 4): This equipment is made up of central 100mm pillars. It gives cardiovascular benefits, promotes strengthening he arms and provides blood circulation to...

Tal Chi Spinners (Area-5' x 5', Helght-4'): The Tai Chi spinners are made up of 100mm NB pipes The sub structure consists of 25 and 20mm NB pipes and heavy duty self-greaseci SKF bearings and bushes p...

Rider (Dip station): All tubular steel of 2.5MM thickness: are galvanized and zinc dipped. All welded Joints are scalloped as necessary and welded. All welds are dressed off removing all sharp edges a...

Sit up station (Bench Press) (Area-4' x 4", Helght 3): This Equipment is made up of 100mm NE Central pillar pipes. This is for exercising and strengthening the back and abdominal muscles Maintenance f...

Self-weighted Rower (Rowing Machine) (Area: - 3' x 3, Height 3): All tubular steel of 2.5mm thickness are galvanized and zinc dipped. All welded joints are scalloped as necessary and welded All welds ...

Bicycle(Exercise Cycle) (Area - 4' x 3', Height - 4) This is a stationary cycle made up of central pillar 100m pipes. The seat is made up of FRP. This equipment gives the benefits of cycling and Impro...

Standing Rotation (Area 6' x 3', Height - 4.5") Providing and fixing Standing rotation made up o 100mm NBMS pipe the sub structure consists of 32mm NBMS pipes and heavy duty self greased SKF bearing a...

Rope Puller: The rope puller made up of 100 mm NE MS pipe. The sub structure consists of 32mm NB MS pipes and heavy duty pulleys provided to ensure smooth rope transition; These are primary Indicator ...

Siting Rotation (Area-6'13', Height-412): This equipment is made up of 100mm NB MS pipe. The sub structure consists of 32 mm NBMS plpes and heavy duty self greased SKF bearings and bushes provided to ...

Pull down challenger (Shoulder Press) (Area - 4x 3. Height-7): All tubular steel of 2.5mm thickness are galvanired and zinc dipped. All welded joints are scalloped as necessary and welded. All welds a...

Chest Press (Area-4' x 3', Height-7): The chest press is heavy guage steel made up of 100mm NB MS pipes. The sub structure consists of 25mm NB MS pipes and heavy duty bushes pivoted to one end and mov...

Elliptical (Cross Trainer) (Area-5' x 3', Height-5 ): All tubular steel of 2.5mm thickness are galvanired and zinc dipped. All welded joints are scalloped as necessary and welded. All welds are dresse...

Air Walker (Moon Walker) (Area 4' x 3'. Height 4): This Equipment is made up of 100mm NB heavy guage pipes. The footsteps are made up of Aluminium castings. This helps in strengthening and toning the ...

Double health walker (Hand Puller) (Area-51.5 x 34, Height-5.5): This equipment is made up of Central 100mm pillars. The first steps are made up of Aluminium castings. Two people can exercise on the 1...

Hip Swivel (Area 3' x 3', Height 44.5): This equipment is made up of Central 100 mm NB centra Billars. The footsteps are made up of Aluminium and flexibility. The whole equipment is duly powder coated...

Providing designer granite benches of 4feet length and 1 feet width side arm supports with lion carving and other all carvings Data Rate Copy Attached ).

Supply and fixing of children multi play equipment ZEPHYR (KPS-307A-E-PVC) with spiral slide, monkey bar with number panel. products must be tested and certified to meet EN 1176 safety standards. The ...

Supply and Fixing of 4 Seater See Saw: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifyin...

Supply and Faing of Maxima N Swing All products must be tested and certified to meet EN 1176 safety standards, The EN 1176 certificates must be issued by a reputed notified International Certifying Bo...

Supply and Instalations of IP66,60 watts LED Solar Street Light with 5Mtrs lon MS pole as detailed specification Housing ABS Anti -UV Plastic Housing with Lence or reflector should not be lessthan 640...

Supplying and Foxing CC TV camara consisting the following configuration 1.3MP/1/3 CMOS/25(p)/30(N)fps@1280X720,colour [email protected],3/W: 0.005 [email protected], True Day and Night/23X Optical Zoom, IR Distanc...

Supplying and foxing DS-7200Series turbo HD DVR consisting the following configuration H.264 Video Compression, High definition real-time recording, support turbo HD Video Input, Easy smart serach for...