Electrical Works

Amount

Renewal by Supply, Installation, Testing and commissioning of 1No. 10 persons passenger Lift as per following technical specifications including all taxes and duties. Technical Specifications: 1. Location: State Consumer Disputes Redressal Commission, Chennai-3. 2. Type of Lift: Passenger elevator 3. Product: KONE I MiniSpace - Gearless with Machineroom Technology 4. No of Units: 1 No. 5. Load & Capacity: 680 kg or 10 persons 6. Speed: 1 m/s 7. Stops & Openings: 5 stops & 5 openings, Single entrance car 8. Total no. of opening: 1 entrances 9. Travel height: 16.23 m 10. Elevator Grouping: Simplex Full Collective Control 11. Well Dimension: 2060 mm width and 1875 mm depth (required) 12. Head Room height: 5315 mm (required) 13. Pit Height: 1910 mm (required) 14. MAP Floor Position: Ex Machine room 15. Car dimensions: 1300 mm wide x 1350 mm deep x 2200 mm high 16. Door dimensions: 800 mm wide x 2000 mm internal height

17. Door type: Two-panel centre opening Panel 4 18. Car design: SS silver brushed 19. Car Panel Finish: Stainless steel Hairline AISI441 20. Handrail: Round Bend Handrail Stainless steel Hairline AISI441 at Rear Wall 21. Ceiling & Lighting: Integrated roof LS4 Stainless steel Hairline AISI441 Square Spot Light LED 22. Flooring: 25 mm 22. Flooring: 25 mm 24. No. of Floors covered: G+4 25. Floor Mark: 0, 1, 2, 3, 4 26. Interfloor distance: 3600 mm, 3610 mm, 4480 mm, 4540 mm 27. Landing door material: Stainless steel Hairline AISI441 28. Car operating panel: 1 Full Height ST4 - Silver Brushed St. St. AISI304 Silver brushed StSt Segmented LCD display Square surface mounted Buttons with braille KDS90 29. Landing Signalization: Silver brushed stainless steel (ST4) 7 segment display Flush Mounted Silver brushed StSt Square,surface mounted with braille KDS90 30. Standard Features: (a) Correction drive to next level (b) Emergency Alarm @ Main Floor '(c) Car Call backwards (d) Overload function, constant indication/Buzzer '(e) Bypass load Function (f) Auto Cut off Fan and Light (g) Manual Rescue Operation (h) Centralized Hoisting for lesser vibration and smooth travel (i) Pit Ladder

(j) Micro movement Led Based Buttons (k) L.W.D. (Load Weighing Device) (l) Direction & Position Indicator in Car & Landing (m) Advanced Car Position Indication (n) Automatic Brake Test function every 11hours (o) Every run brake supervision (p) Phase reversal functioning (q) Signal Fixtures (r) +10% to -10% Voltage Fluctuation Withstanding Capacity '(s) Door Close Button (t) Door Open Button (u) Car Emergency Light (v) Fireman Drive (w) Curtain of Light 169 Beams (x) Accurate Relevelling, Automatic, Closed Door (y) E, with emerg.opening device 31. Additional Features: (a) Yes Gong in Car (b) Emergency Rescue Device with audio announcer '(c) Three way intercom (d) Nudging service (e) Attendant Service (f) Lift Announcer (g) Square Spot Light LED (h) Interface only (i) B, 2 Hours Fire rated landing doors 31. Minor Building work : To be provided by the lift contract.

32. Scaffolding : To be provided by the lift contract. 33. M.S.Sill angles and facia plates: To be provided by the lift contract. 34. Steel for lift machinery : To be provided by the lift contract. 35. Servicing and maintenance : Free comprehensive Servicing and maintenance during the guarantee period of one year. 36. Automatic Rescue Device : To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type of battery system with charger, invertor, under voltage protection system etc, complete with all accessories. 37. Provision of intercom with phone : To be provided by the lift contract. 38. Lift Licence : Preparation of drawing, payment of charges to CEIG / Lift inspectorate and insurance policies if any and obtaining CEIG safety certificate as per lift act. 39. Lift Duty motor of adequate capacity, reduction worm gear, electro magnetic brake with compression springs, over speed governor, phase failure and phase reversal relay, alarm bell, T guide brackets for car and counter weight, rubber padding under winding unit, car safety gears, buffer electro mechanical door locks, emergency key, side supporting angles motor over load protection devices. Final limit switch, main suspension ropes, counter weights, lifting joist for mounting the machineries. 40. Site testing in accordance with IS 14665 should be carried out at the time of handing over.

BHARAT CORP (BID ID -1484351)