Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
18 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIG JAT
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any work of provision or maintenance of Data logger or RTU or other Remote sensing equipment for predictive/preventive maintenance of Signaling gears. O R Any work in connection with Signaling installation and which includes Data Logger and/or RTU and/or other Remote sensing equipment for predictive/preventive maintenance of Signaling gears. OR Any other signaling work involving indoor wiring. Note 1: Tenderer may be required to submit the schedule of those works, Completion/ Performance Certificates of which have been submitted by him/her in support of 30 / 40 / 60 % (as the case may be) criterion of similar nature of work.
33 conditions · 16 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Augmentation of datalogger and provision of large Format Display in Jammu Division
433_Sig_JAT_101_26-27
433_Sig_JAT_101_26-27
Open
Works - General
4 Months
Jammu, Jammu And Kashmir
₹0
₹2.2 L
18 May 2026
24 Apr 2026
4 May 2026
67 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 92,50,162.41 | ||
| — | 11.00 | — | — | ||
| "Supply of Multi Port Front End Processor (FEP) with 12M cache or latest 16GB Memory (4x4GB) or as required for latest OS and application software two nos. of dual card modems with and 230/24V/10A charger and 24V, 42AH maintenance free battery, as per technical specification IRS:S-99/2006 (Amdt-3) or latest and as per RDSO guidelines letter no. STS/E/Datalogger Vol. XX dated 12.09.2011. (Inspection: RDSO)" | — | — | — | 13,92,660.06 | |
| — | 9.00 | — | — | ||
| Supply of Central Monitoring Unit as per following specification: Intel core i7, 2.8 Ghz or higher, Memory: 8GB or as required for latest OS and application softtware, Hard drive: 500 GB or higher, ports: Two (02)nos. inbuilt serial ports, 4 USB ports, Network card: two(2)nos. Gigabit Ethernet ports, Key board: USB key board, Mouse: USB mouse, VGA ports: 02nos. (VGA/DVI/HDMI/DP),Monitor: 21.5/22" TFT Monitor,Operating system: Windows10 professional or higher(Licensed version),Security software: Kaspersky antivirus (Licensed version), System make: HP/DELL, Printer: Wireless Network Laser Printer HP or similar make,Modem: GPS modem D-link, LAN Card:Gigabit LAN card-D-link, UPS: 1 KVA online UPS with 6 hrs backup12V/42AH external modules- 3nos. of Exide/Amararaja(Quanta) make. Batteries make: Numeric/Emerson as per RDSO guidelines letter no.STS/E/Datalogger/Vol.XX dated 12.09.2011.(Inspection: RDSO) | — | — | — | 8,73,265.05 | |
| — | 2.00 | — | — | ||
| "Supply of 19"" Rack Mountable High end Data Logger Server as per Specification: Intel Xeon R740, 2.7 GHz or higher, Cache: PERC H730 Integrated RAID Controller, 1GB Cache, Dual, Hot-plug, Redundant power supply (1+1) 1100W, RAM: 16 GBRDIMM, 2400MT/s, Dual Rank, X8 Data width HDD : 4*600GB 15k RPM SAS 2.5in Hot-plug Hard drive or higher, Network: Dual ports of Gigabit Ethernet or higher, Drive: DVD+/- RW, SATA, Key board: USB Keyboard, Mouse: Wired Mouse, Monitor: 19.5"" LED Monitor with LED Back light or higher OS & Software: Window-10 Professional (Licensed version), Kaspersky antivirus (1 years Licensed version), UPS: 1KVA online with 30 min. backup of make Numeric/APC or similar, Make: HP/DELL or Similar Inspection By RITES" | — | — | — | 13,10,456.58 | |
| — | 10.00 | — | — | ||
| Supply of Dual card E1 to serial port converter for networking of Data Logger as per Specification: (i)Features: DTE side Asynchronous (RS232); DCE Side- 4 wire E1communications (G.703) Line speed 2.048 Mbps; 2 nos. DTE ports and 2 nos. DCE ports; Line impedence-120ohm balanced; LED indications- Power, E1 sync,Test, error, TD, RD and health; Inbuilt BERT tester;supports Remote loop and local loop back tests for diagnostic purpose. (ii) E1 Interface: Standards compliance- ITU-T G.703; E1 transceiver chipset should comply ITU-T G.736 andG.823; Interface Rate- 2.048Mbps+-50ppm; Line coding-HDB3; Line isolation - 1500V(RMS); (iii) RS-232 port: Standards compliance-EIA RS232C; Interface types-RS232; Signal-TXD,RXD, GND;Baud rate- upto 57600 bps (autobaud); Asynchronous serial. (iv) Electrical and mechanical: Input voltage-5VDC; Power consumption less than 2W; operating temperature -10deg Cent. to+70 deg. cent; Storage temperature -10 deg cent. to+70 deg. cent; Euro rack insertable. (Inspection:Consignee) | — | — | — | 3,45,130.3 | |
| — | 2.00 | — | — | ||
| Supply of Oracle software Representative of Railway Engineer ) | — | — | — | 5,53,250 | |
| — | 3.00 | — | — | ||
| Supply of 42'' U rack for installing FEP and server as per requirement of Site Engineer (Inspection by consignee) | — | — | — | 1,70,756.91 | |
| — | 6.00 | — | — | ||
| Supply of GPS Module suitable of working with Datalogger as per requirement of Site Engineer.( Inspection by consignee) | — | — | — | 1,92,000 | |
| — | 3.00 | — | — | ||
| Supply of 24 Port 10/100/1000 Mbps Layer 3 Managed Switch. with 4 Nos.10/100/ 1000 Base-T/1000 Base-X SFP ports conforming to RSDO Spec. RDSO/SPN/TC/83/2020, Revision 2.1 or latest (Inspection by consignee) Product must be TTP-registered and certified with RDSO. | — | — | — | 2,95,002.3 | |
| — | 3.00 | — | — | ||
| "Supply & configuration of Signal status Software as per RDSO Guidelines letter no. STS/E/Datalogger/ Vol. XX dated 12.09.2011 or latest if any. (Inspection: Consignee)." | — | — | — | 1,50,000 | |
| — | 12.00 | — | — | ||
| "Supply of 40"" or higher (4K UHD) LED Monitor for Large Format Display for display of Signal Status of each Network. Make: Sony/LG/Samsung or better. Inspection:RITES" | — | — | — | 8,37,446.4 | |
| — | 2000.00 | — | — | ||
| "Supply of UTP CAT-6 cable, having bare Copper Conductor of diameter 0.5 mm, Suitable for Gigabit Ethernet as per latest TEC Specification. make: DLink/Amp/Systimax or similar (Inspection by: Consignee)" | — | — | — | 53,520 | |
| — | 3.00 | — | — | ||
| Supply of Application System as per the specification. Intel Core i7 with 3.6 GHz or similar, Memory: 16 GB or as required for latest OS and application software, Hard drive: 500 GB or higher, ports: Two (02)nos. inbuilt serial ports, 4 USB ports, Network card: two(2)nos. Gigabit Ethernet ports, Key board: USB key board, Mouse: USB mouse, VGA ports: 02nos. (VGA/DVI/HDMI/DP), Monitor:21.5/22" LED Monitor, Operating system: Windows10 professional or higher(Licensed version),Security software: Kaspersky antivirus (Licensed version), System make: HP/DELL, Printer: Wireless Network Laser Printer HP or similar make, Modem: GPS modem D-link, LAN Card: Gigabit LAN card-D-link, UPS: 1 KVA online UPS with 6 hrs backup12V/42AH external modules-3nos. of Exide/Amararaja (Quanta)make. Batteries make: Numeric/Emerson as per RDSO guidelines letter no. STS/E/Datalogger/Vol.XX dated 12.09.2011. (Inspection by consignee) | — | — | — | 3,19,741.92 | |
| — | 3.00 | — | — | ||
| "Supply of PC based LED Multi Monitor Display Systems as per technical specification : System should capable of driving upto 06 nos of Display unit *700W 90 Percent Efficient Chassis or better or latest *Intel Xeon E5-1603v3 2.80GHz 10MB 1866 4C *2*2GB Graphics *16GB DDR4-2400 (2x8GB) Reg RAM *1TB 7200 RPM SATA 1st Hard Drive *USB Keyboard *USB Optical Mouse *MS windows OS 10 pro CD with Installer Kit *Antivirus- Kaspersky/Quickheal with 03 years subscription minimum. *9.5mm Slim SuperMulti DVDRW 1st ODD *Remote Graphics Software (RGS) for Z *Processor Air Cooling Kit *1KVA online UPS for 30 min backup for above system load of Make : Numeric / Emerson/APC (Only for CPU ,not for Monitors) *System Make - HP/Dell or similar (Inspection by RITES)" | — | — | — | 8,82,549.39 | |
| — | 67.00 | — | — | ||
| Supply of Multi Monitor Software along with yard digitalization as per following technical specifications: (i) Development of software to display multiple yards by one display unit. (ii) Station yard digitization for displaying multiple stations on display units as per site requirement. (Inspection:RITES)" | — | — | — | 13,87,201.5 | |
| — | 10.00 | — | — | ||
| Supply of True RMS Digital Multimeter, 4000 Count, Voltage: 1000V AC/DC. Make/ Model : Fluke 17B+, DI-LOG 9206,Meco or similar or better. (Inspection: Consignee). | — | — | — | 1,05,601 | |
| — | 10.00 | — | — | ||
| Supply of Maintenance Tool kit : Each kit consists of item No. 1 to 13 as per list below: - i) Spanner D/E 30x32 mm =1 No. ii) Spanner D/E 18x19 mm =1 No. iii) Spanner combination Ring and open end 19 mm = 1 No. iv) Spanner open end 50 mm = 2 Nos. v) Spanner combination ring & open end 30 mm = 01 No. vi) Spanner combination ring & open end 40 mm = 02 No. vii) handle extension = 01 No. viii) L handle = 01 No. ix) Box Spanner 30 & 19 mm = 01 Nos. x) Cutter cum stripper 4" = 01 No. xi) Screw driver 6" = 02 Nos. xii) Adjustable wrench 375 mm = 01 No. xiii) Hammer ball 1.5 lb = 01 Nos. (Inspection: Consignee) | — | — | — | 4,909.3 | |
| — | 4.00 | — | — | ||
| — | 10.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRGCC2022ACS7-10.pdf
ATTACHMENT
SpeicalconditionsofworkSignalDLAugmJAT.pdf
ATTACHMENT
IRGCCApril2022andcorrectionSlip.pdf
ATTACHMENT
StandardTenderDocument2022andcorrection.pdf Standard Tender Documents with correction
ATTACHMENT
StandardTenderDocument2022andcorrection.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .