SPECIAL REPAIR TO BLDG NO. T-110, T-111, T-112, T-118 AND BLDG NO. T-11, AND T-49 AT KIARI AREA UNDER GE 860 EWS.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engr-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each colour tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:4 for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:4 for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 sqm with shutters without taking of shutter from the framecomplete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame not exc 1.5 Sqm with shutters without taking of shutter from the frame complete all as specified and directed by Engr-in-Charge.

S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick 2nd class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides(feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 150mm extruded aluminium handle complete all as specified and directed by Engr-in-Charge.

S&F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 75mm long complete all as specified and directed by Engr-in-Charge.

S&F 140 mm over all length of cover plate floor door stopper of aluminium alloy body and tounge, anodized with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge.

S&F in repair 4mm thick sheet glass ordinary quality and glazing with aluminium snap beading on aluminium frame for door/window and ventilator in square n exc 0.5 sqm each complete all as specified and directed by Engr-in-Charge.

M&L preparation of untreated new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and priming with a coat of red oxide and treating with two coats of synthetic enamel paint all as specified and directed.

Dismantling wall/ceiling board(fibre, pulp insulation etc.) or insulation boards/slabs/blankets, any thickness including fillets complete all as specified and directed.

M&L for plywood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; 6 mm thick( 5 Nos ply) fixed with nails to timber frame work complete as in walls complete all as specified and directed by Engr-in-Charge.

M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in ceiling paneling complete all as specified and directed by Engr-in-Charge.

M&L First class soft wood sectional area not exceeding 6 sqcm Moulding as in cornices, picture rails and the like , secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. in framed work under 40 sq. cm in section complet all as specified and directed.

M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 6 Sq cm n.exc 13 Sq cm secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and paving etc in exec 15 cm thick below or above GL complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection/ path and fininshed even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc complete all as specified and directed by Engr-in-Charge.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

M&L in repair 0.50mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws as specified and directed by Engr-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position of capacity exceeding 250 ltrs and not exceeding 500 ltrs and removing to stores complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including 20 mm bore ball valves and all accessories complete all as specified and directed by Engr-in-Charge.

S&F in repairs Tubular Towel rail 20mm dia 600mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white and trap, including connection to drain (or outgoing pipe) and to flushing pipe complete all as specified and directed by Engr-in-Charge.

S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover for pedestal pan complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china wash hand basin with , coloured, flat back of size 630 x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, fixed in repairs, complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 750 mm complete all as specified and directed by Engr-in-Charge.

Taking down of 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

S&F 16 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge.

Taking down of 20/25 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

S&F 20 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap plain with grating incl jointing with solvent cement of outlet dia 75mm complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair for Bib taps,short body, fancy type, cast copper alloy, brass chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm complete all as specified and directed by Engr-in-Charge.

S&F in repair for Fancy type, Pillar taps, cast copper alloy, with capstan heads , chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and directed by Engr-in-Charge.

S&F in repair stop valves / angular valves 15mm bore chromium plated, cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge.

M&L SDC Laminated flooring 8mm thick of any coloured manufactured by Direct pressure laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength complete all as specified and directed by Engineer-in-Charge.

S&F coloured PVC designer modular wall/ceiling cladding 5 to 6mm thick with air gap, installed with necessary fixing GI channel or frame with end joints on edges (designed, colour patterns as per directed by Engr in charge. The frame work will be fixed to wall using aluminium screws, complete all as specified and as directed by Engr in charge. Note:- If necessary size of the frame work wall/ceiling panelling will be changed as per site requirement

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each, complete all as specified and directed by Engr-in-Charge.

M&L for preparing old surfaces including priming plastered and other surfaces with alkali resistant priming paint and applying two coat of cement base paint complete all as specified and as directed.

S&F in repairs One piece European WC vitreous china with S/P trap & slow motion seat cover as per Cera cat part no. S1014124 or equivalent approved in CENC of Jaquar /Hindware etc complete all as specified and as directed.

Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

S&F in repair Angle stop valve of 15mm size with PTMT any colourhigh pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed by Engr-in-Charge.

S&F 25 mm outer diameter of pipe 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

Description all as per srl item No.67.00 here-in-before but with One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

Description all as per srl item No.67.00 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F Modular switch 1 way 6A , 1 module size complete all as directed.

S&F Modular switch 1 way 16A , 1 module size complete all as directed.

S&F Modular Bell push 1 way 6A , 1 module size complete all as directed.

S&F Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.

S&F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F Modular cover plate with frame 6 module.

S&F Modular cover plate with frame 4 module.

S&F Modular cover plate with frame 3 module.

S&F Modular cover plate with frame 2 module.

S&F electric call bell ding dong AC 230 volts Single Pole complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all specified and as directed by the Engineer-in-Charge.

S&F in repalcement, of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.

S&F in repalcement, of LED bulb 9Watt complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing round/Square shape 12 watt 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.

S&F DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

Supply and fixing SP 5 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

Description all as per srl item No. 67.00 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

S&F in replacement of Modular cover plate with frame 1 module.

S&F, in repalcement, of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

S&F in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.

S&F, in repalcement, LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F, in repalcement, exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 2volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed by Eng-In-Charge.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.

M/s Koul & Sons (BID ID -3479268)

M/S ULTRA INDUSTRIES (BID ID -3479282)

M/S WEB COMPNAY (BID ID -3478482)

N K BUILDERS (BID ID -3477987)

M/S SHIV SHAKTI ENTERPRISES (BID ID -3479802)