PROVN OF DSC GUARD REST ROOM AND VISITOR ROOM AT MAIN GATE OF 46 WEU AT 20 WING AFS AND SPECIAL REPAIR/ REPLACEMENT OF EXISTING DOUBLE BARBED WIRE FENCING WITH DOUBLE CHAIN LINK FENCING AT STATION ARMORY AT AF STN BHUTTABARI UNDER GE (AF) BAGDOGRA

Amount

Excavation in trenches n.exc 1.5m width and n.exc 1.5m depth and getting out in Soft/ loose soil complete all as specified and directed.

Surface excavation soft/loose soil not exc 30 cm deep and averaging 15cm deep getting out in soft/loose soil complete all asspecified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundations complete all as specified and directed.

M&L for brick work with old size flyash brick straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L RCC, M-30 Design Mix (20 mm graded stone aggregate as in Slabs supported on walls,roofs,landing,balconies,deck slabs and in shelves etc complete all as specified and directed.

M&L RCC M-30 Design Mix (20 mm graded stone aggregate as in footings & plinth beams etc complete all as specified and directed.

M&L RCC M-30 Design Mix (20 mm graded stone aggregate in lintel band including formwork complete all as specified and directed.

M&L RCC M-30 Design Mix (20 mm graded stone aggregate as in beam etc complete all as specified and directed.

M&L RCC M-30 Design Mix3 (20 mm graded stone aggregate as in coulmns etc complete all as specified and directed.

M&L RCC M-30 Design Mix (20 mm graded stone aggregate as in Chajjas etc complete all as specified and directed.

M&L for Mild steel TMT bar of 10mm dia and over cut to length to shape required cranking and bending spirally for hooping column and like incl binding with mild steel wire not less than 0.9mm dia complete all as specified and directed.

All as per item No 11 above, but 6mm to 8mm dia.

All as per item No 11 above, but 5mm dia & over upto incl 10mmdia in stirrups spaces & binder complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick work or concrete surface in cement mortar 1:4 surface finished fair and even complete all as specified and directed.

M&L for 10mm thick Rendering on fair faces of brick work or concrete surfaces built in cement mortar 1:6 finished even and smooth in wall complete all as specified and directed.

M&L for 5mm thick Rendering on fair faces of brick work or concrete surfaces built in cement mortar 1:3 finished even and smooth in ceiling complete all as specified and directed.

Returning and filling in with soil obtained from excvation in laying n exc 25cm thick including watering ramming etc. complete all as specified and directed.

Removal of excavated spoil of soil to a distance n exc 50mtr and deposited complete all as specified and directed.

M&L for 20mm thick damp proof courses to horizintal or vertical surface including necessary formwork in cement mortar 1:2 complete all as specified and directed.

M&L for Formwork to sides of concrete foundations,footings,bases of columns,raft beams,sides and soffits of foundation and plinth beams,and similiar work,vertical or to batter rough finished concrete flat surface complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions finished surface smooth finished complete all as specified and directed.

M&L for Formwork to chajjas, troughs and similar items including edges finished surface smooth finished complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams,beam haunching,girders and beams etc finished surface smooth finished complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar work not exc 200mm thick for flat fair finshed surfaces complete all as specified and directed.

M&L for Formwork to edges of concrete flat exc 5cm but n exc 10cm wide all as specified.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Polythene film, black, 50micron laid in floors all as specified and as directed.

M&L for 75mm thick, plain cement concrete, Type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified.

M&L for screed bed or bedding layer in CM (1:4) 15mm thick for floor finishes complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thick laid over and including 10 mm thick rendering in cement mortar 1:3 set set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for Preparation of new plastered or un plastered surfaces of walls including cornices, pilasters etc and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L for applying three coat of white wash on ceiling including preparation of new plastered surfaces complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement all as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for 3mm thick figured glass,pin headed type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests including trap set in and including concrete and PVC valveless symphonic action type 10 ltr flushing cistern low level white with inlet ball valve float and handle including flush pipe and brackets complete all as specified and directed.

S&F Vitreous china wash basin white flat back size 550x400mm including pillar taps,32mm brass,chromium plated waste fittings and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F PVC Connection 15mm size with PTMT nuts of length of 450mm complete all as specified and directed.

S&F CP bib taps cast copper alloy fancy type screwed down screwed for iron pipe 15mm bore complete all as specified and directed.

S&F CP stop valves cast copper alloy high pressure fancy type screwed both ends iron pipe or for unions 15mm bore complete all as specified and directed.

S&F Brass CP shower rose 125mm size fixing with 15mm pipe complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) Bends of any radius complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe 100mm dia & rendering,cutting out existing benching channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished & reforming benching as required.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or un equal complete all as specified and directed.

S&F 110mm bore PVC (SWR) Bends of any radius complete as specified complete as specified.

S&F 125/110mm PVC SWR'P' trap complete all as specified and directed.

S&F PVC SWR 110mm dia pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC SWR 110mm Vent cowl complete all as specified and directed.

S&F CP stop valves cast copper alloy high pressure screwed both ends ,butterfly handles iron pipe or for unions 20mm bore complete all as specified and directed.

S&F 32mm dia low density polyethylene pipes(LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceiling or in floors etc. complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.

S&F in ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F GI tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors 20mm bore complete all as specified and directed.

S&F GI tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors 15mm bore complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or weldedSteel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F second class hardwood plain,solid, straight chowkhats and frames, wrought ,framed rebatedon the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F second class hardwood,35mm thick glazed and skeleton door shutter open rebated and prepared to receive glass, gauze etc divided into, squares, with plain, chamfered or roundde and rebated sash bars, any number edges of framing plain framed fitted with cut and mitred beads for securing glass etc. supplied and fitted to chowkhats complete all as specified and directed.

M&L for mild steel hold fast made out of 25x3mm size flat iron complete all as specified.

M&L for two coat of synthetic enamel paint over a coat of red oxide,zinc chrome primer on new steel surfaces complete all as specified.

M&L for two coat of synthetic enamel paint over a coat of pink primer to new wooden surfaces including preparation complete all as specified and directed.

S&F Factory made solid panel PVC door shutter30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.

S&F Solid PVC door frames of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F Aluminium alloy anodized sliding door bolt with hasp stable (bolt type) and fixing bolts of extruded section and fixing bolts of extruded sections or cast aluminium alloy and fixed 300mm size complete all as specified and directed.

S&F Aluminium anodized barrel tower bolts of extruded section and fixed 150mm complete all as specified and directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles fabricated type anodized complete all as specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for applying evenly a coat of blown type bitumen at the ratye of 1.50 kg per Sqm and binding with clean dry sand @ 0.05 Cum per sqm complete all as specified.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in surface channel/ benching in manhole/ coping etc finished even and smooth using extra cement incl neccesry formwork complete all as specified ans as directed.

M&L for providing cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in precast cover slab for drain etc and set in C:M 1:6 complete all as specified and as directed.

M&L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for DWC HDPE corrugated sewage pipes 150 mm bore laid in trenches and jointed complete all as per manufacture's instruction and complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to 150mm bore pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and no pigment including 50mm thick sand cushioning below tiles complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete as per site requirement and all as specified & directed by Engr-in-Charge for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per ser item No. 85 above here in before but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 85 here in before but for One 5 Amp 5 pin socket outlet point on independent board.

All as per ser item No. 85 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes.

S&F switch piano flush button 5 Amp single pole one way 230 volts white finish complete all as specified & directed.

S&F switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified & directed.

S&F switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified & directed.

S&F ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified & directed.

S&F in replacement surface and wall mounted LED batten 20 watt - 4Ft White with Aluminium housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt and all as specified and directed.

S&F in replacement surface and wall mounted LED batten 10 watt - 2Ft White with Aluminium housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt and all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd all as specified and directed of approved make.

S&F submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earting cable drawn in conduit/ casing and caping will be measured as one lengt of sub main. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

S&F distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

S&F of MCB SP 6-32 Amps/ 40 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as specified & directed by Engineer-in-charge.

S&F of MCB SPN/DP upto 32 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as specified & directed by Engineer-in-charge.

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete as per site requirement and all as specified and directed of approved make.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct urrent motor (BLDC) all as specified and directed of approved make.

Supply and laying pipe galvanized, “Medium class”, including fittings 40 mm bore complete all as specified and directed.

Supply and laying pipe galvanized, “Medium class”, including fittings 25 mm bore complete all as specified and directed.

S&F Gun metal gate valve with iron wheel head, screwed both ends for GI steel pipe of 40 mm dia bore sizes complete all as specified and directed.

S&F Gun metal gate valve with iron wheel head, screwed both ends for GI steel pipe of 25 mm dia bore sizes complete all as specified and directed.

M&L for Drilling and tapping of CI water line 20 mm/ 25mm for branch connection complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core all as specified and directed.

Supply lay/spread in trenches, river sand, clean, including spreading, levelling, punning as in cushioning of cables all as specified and as directed. Note :- Punned depth will be measured and paid.

Supply, lay in trenches fly ash bricks, old size for cable protection all as specified and directed. Note:- Bricks shall be laid in such a way that its length is perpendicular to the length of cable.

M&L for Boring of holes under road, pavement, hard standing upto 2 mtr deep in soil and suitable for upto 200mm dia of pipe with manual harizontal boring for insertion of GI pipe for 25mm dia as per site requirement and complete all as directed. Note:- Disposal of spoil to a distance of n exc. 50 m to be done by the controctor within the quoted rate.

Dismantling posts or struts (steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc and making good disturbed ground to match with the existing surface complete all as specified and directed.

Dismantling of fencing wire mesh of any description all as specified and as directed.

Demolition of (Un-reinforced) Cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed including removal of debris out side MD land.

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and as directed.

M&L for cement concrete (1:2:4), type B1 (Using 20mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') all as specified and directed.

Supply only Steel round bar 10 mm dia and over for tying chain link fencing etc complete all as specified and directed.

Supply chain link fencing MS galvanised fencing any size or type including line wires, any mesh, size and type of standard rails straining bolts, etc. including provision of binding wire complete all as specified and as directed. (Note- Fixing measured separately)

Fixing only chain-link fencing including line wires, any mesh, size and type of standards, rail, straining bolts, etc. including provision of binding wire all as specified and as directed.

Supply screw bolts (machine made) with hexagonal or square head at one end and rounded the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n.exc 10 cm and dia of shank 11 to 15mm and fixed in position complete all as specified and directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and as directed (each line wire to be measured).

Supply and laying concertina coils made up of hard drawn steel wire fabric with 14mm blade clips 05 Nos in each spiral, tape thickness 0.50mm, GI stripping core wire 2.60mm thick and spiral turns per roll is 52 Nos including securing with 'Y' shaped angle iron with available size complete all as specified and directed by Engr-in-charge. Note:- One Roll of concertina coil should extend upto 10RM.

M&L for Preparation of new untreated steel surfaces as of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of previously untreated surface of steel n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified as directed.

Surface excavation in Soft/ loose soil not exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified as directed.

M&L for broken stones/ boulders hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and well rammed to a true surface all as specified and as directed.

M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded stone aggregate) as in sub base floor complete all as specified and as directed.

M&L for designed, pre polished chequered cement concrete tiles 25mm thick with grey cement and pigments set, jointed & pointed in neat cement slurry, laid over 20mm thick screed bed in CM 1:6 finished with pigments match the shade of tiles complete all as specified and directed.

M&L for PCC (1:2:4), type B1 (using 20mm graded stone aggregate) as in coping, kerbs etc complete all as specified and as directed.

Removing excavated materials (Soils) to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

M&L steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts nuts & screw as specified type 410 SP-22 (9 mtrs long) complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sqmm 2 core all as per site requirement and as specified and directed.

S&F 200/250 watt aerodynamically designed street light having inbuilt titling angle arrangement with excellent thermal management made from aluminium die cast housing, high power LEDs and secondary lenses with IP66 protection with system efficacy of >110/125 LPW, 10KV SPD included complete all as specified and directed.

S&F tubes light grade galvanised upto 40mm with all fittings and fixed to walls including cutting, bending, welding for street light bracket complete all as directed by Engr-in-Charge.

M&L cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nut, bolt, washer, welding, bending, cold or hot, drilling holes for bolts any size as directed inclusive of one primer coat one under coat, one finishing coat of paint complete all as specified and directed.

S&F in replacement of PVC weather proof, hinged door, junction box with 240V, Neutral link, three phase connector, with IP 66/67 protection suitable for outdoor installation on pole/wall surface and including with 1 No MCB SP of 6 Amps, necessary fixing arrangement such as clamps, nut bolts etc including old unserviceable junction box complete all as specified and directed. Make: Sintex Cat Part No. GSMB 2520, Hensel Cat Part No KF 2500H or equivalent of ISI mark as approved.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.

SHRI P P SHARMA

MS CHOWDHURY ENTERPRISE

M/S MANAS MITRA

NEO BUILDERS

M/S Joy Construction

M/S Banerjee construction co