REPAIRS AND POLISHING PAINTING OF SPL FURNITURE ISSUED TO OTM AND OFFICERS MESS UNDER GE EAST LUCKNOW

Amount

A) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP/TP/SPL furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. B) Work will be executed where the furniture exist in different User Units of GE (East) Lucknow Cantt including BSO's Furniture Yard as directed by Engineer-in-Charge. C) Timber shall be of 2nd class teak wood seasoned. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture.

Table Dining 4 Persons : MAP /Spl type or similar type Drg

a) Top 18 mm thick prelaminated HDHMR board BSL (Make-Century ply/Greenply/Archidply/ action tesa) with 0.8 mm thick PVC edging and colour/shade as approved by EIC/GE complete rest all as per drg.

b) Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

c) Top long rail as per drg

d) Top short rail as per drg

e) Legs as per drg

f) Shoe as per sample

Peg Table :FD-277/ 384, DB-3973/MAP/TP/Spl

a) Top 18 mm thick prelaminated HDHMR board BSD (Make-Century ply/Greenply/Archidply/Action tesa) colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed all around top with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) Top 12 mm thick glass duly polished shall be fixed with silicone gel and colour of glass shall be approved by EIC complete rest all directed by EIC or as per drg.

c) Legs as per drg

d) Top Short shall be provided as per shape & size of long rail complete as directed by EIC

e) Center stiffener shall be provided as per shape & size of sides stiffner as directed by EIC.

f) Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

g) shoe as per sample

Table Bed Side :FD-276/248/MAP

a) S/S handles of drawers as per sample held with BSO office

b) Sides with 18 mm thick prelaminated HDHMR board (Make-Century ply/Greenply/Archidply/Action Tesa) with 0.8 mm thick PVC edging complete rest all as per drg.

c) Top 18 mm thick prelaminated HDHMR board BSD (Make-Century ply/Greenply/Archidply/Action tesa) colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed all around top with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

d) Drawer made of 18 mm thick prelaminated HDHMR board BSD (Make-Century ply/Greenply/Archidply/Action tesa) colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed all around top with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg and bottom of drawer shall be 9 mm thick prelaminated HDHMR (Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) & handle complete . Rest all as per drg.

e) Shutter made of 18 mm thick prelaminated HDHMR board BSD (Make-Century ply/Greenply/Archidply/Action tesa) colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed all around top with strong bonded chemical adhesive through hot pressed machine with SS hinges complete rest all as per drg

f) 6 mm thick back prelaminated HDHMR of table bed side as per drg.

g) 25 mm Square CRCA Section similar to frame shall be provided on top and bottom both side irrespective of what is shown on drg complete with painting .Rest all as specified in drg or as directed by EIC.

Binsoiled linen multipupose : FD-26/241/MAP or similar Spl type etc

a) 12 thick PLHDHMR board Back plas per drg.

b) Door shutter made of with 18 mm thick PLHDHMR board , shade as approved by EIC/GE with 4 mm thick Teak wood edging complete with magnetic catcher (Make-Harrison/ebco) complete including S/S handle and SS Hinges as per sample.Rest all as per drg.

c) Drawer made of 18 mm thick PLHDHMR board , shade as approved by EIC/GE with 4 mm thick Teak wood edging in front & sides and bottom of drawer shall be 9 mm thick PLHDHMR board (Make-Century ply/Greenply/Archidply) complete with telescopic channel & SS handle as per sample (make -Ebco/Ozone/Hettich) . Rest all as per drg.

d) Top/sides/bottom with 18 mm thick PLHDHMR board , shade as approved by EIC/GE with 4 mm thick Teak wood edging . Rest all as per drg. Fabrication arrangement of parts shall be with PVC/MS corner rest all as per drg and as directed by EIC.

e) SS Legs 4 inch height as per sample or as directed by EIC( set means 4 Nos)

f) Readjustment of drawers making suitable arrangements by Providing telescopic chanel (set of two) (Make: Hettich/Ebco/Link) for smooth functioning in each drawer icluding S/S Handle as per sample.

Chair Dining officers: MAP/Spl type

a) Rear legs as per drg or as directed by EIC

b) Front Leg as per drg or as Directed by EIC

c) Seating Frame members front, back sides as per drg or as directed by EIC

d) Bottom/Centre stiffener as per drg or as directed by EIC

e) TW corner as directed by EIC

f) Back strip as per drg or as directed by EIC

g) Replacement of us plywood for seat with new one 12mm thick Plywood BWP and fixing PU foam cushion with 40 Density (Make:Sleepwell (Primo cool)/ Godrej) with tapesrty cloth as approved by EIC/GE of rate not less than Rs 650/RM complete as per Drg and as directed by EIC.

Table computer: MAP/TP or Spl type

a) Top 18 mm thick prelaminated HDHMR board BSD (Make-Century ply/Greenply/Archidply/Action tesa) colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed all around top with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) Sides with 18 mm thick Prelaminated HDHMR board with 0.8 mm thick PVC edging (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) complete rest all as per drg.

c) Complete key board made of 18 mm thick Prelaminated HDHMR board (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) with 2 mm thick PVC edging with telescopic channel (make-Ebco/Ozone/Hettich) complete rest all as per drg & as directed by EIC

d) Complete mouse board made of 18 mm thick Prelaminated HDHMR board (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) with telescopic channel (make-Ebco/Ozone/Hettich) & PVC beading complete rest all as per drg & as directed by EIC

e) Painting of complete Frame by 1st grade enamel paint including all replacement of all shoes /caps complete .Rest all as per drg and as directed by EIC.

Stool dressing : MAP

a) Replacement of us plywood for seat with new one 12mm thick Plywood BWP and fixing PU foam cushion with 40 Density (Make:Sleepwell (Primo cool)/ Godrej) with tapesrty cloth as approved by EIC/GE of rate not less than Rs 350/RM complete as per Drg and as directed by EIC.

b) legs including corner complete as per Drg and as directed by EIC.

Bed Hard Steel: FD/E6/MAP/8® or Spl type

(a) 12mm thick plywood top BWP grade(Make Century ply /Greenply /Archidply ) as per existing shape and size with nut & washer complete rest all as per drg as directed.

(b)Hard rubber shoe std quality as per sample or as per directed by EIC

© Welding work wherever required as directed by EIC

(d)18 mm thick prelaminated HDHMR board BSD head rest & foot rest with 0.5 mm thick PVC beading complete rest all as per drg and as directed by EIC

Almirah Medium / Small Steel: FD-1032/FD-104(m) or similar Spl type

a) S/S 6 lever locks (Make-Godrej/Hettich/Harrison/Nova/Nadia/Rina) as per drg

b) CP Handle as per sample/as per drg

c) Legs as per drg

d) Repairs to door as specified including replacement of hinges

e) Repair/adjustment/denting etc to existing shelf/body including welding as per drg

f) Shutter as per drg.

g) Shelf as per drg

Chair writing with arm & without arm :FD/E6/MAP/12 & TP or spl type

(a) Taking out old/unserviciable seat and supply & fixed new seat made of 12mm thick hot pressed plywood with acrylic/poly propylene fabric( range not less than 350/RM) and polyurethene foam 50 mm thick and 50 density (Make-Sleepwell"primo cool")/Godrej/kurlon) with PVC lipping all round complete all as shown on drawing.

(b) All as above but unserviciable back complete.

(c) New PU arm rest as per drg (each means 2 nos)

(d) Preparation of old painted surface by scraping & rubbing and applying two coats of painting with brush complete frame before fitting of above parts as per drg.

(e) Taking out unserviceable/broken frame and S&F new MS tublar frame powder coated as per drg.

f) Welding work wherever required as directed by EIC

Charpoy MS plytop Drg No-MAP/Spl type

a) 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) as per existing shape and size with shunken nut/bolts complete rest all as drg and as directed

b) Hard rubber shoe std quality as per drg

c) Welding work wherever required as directed by EIC

Chair Verandah :FD-19, FD-256, FD-359/MAP/11/MAP-II/15

a) Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by EIC

b) Hard rubber shoes as per drg and as directed by EIC

c) Centre stiffner of 19 mm MS tube shall be welded at center as directed by EIC

d) PVC seat & Back (Make- AMKO/Comfo/Classic) rest all as per drg (each set means seat & back both)

e) Removing old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern all as specified(colour of cane shall be approved by EIC/GE)

Chair School with Hand Board FD-MAP/Spl Type

a) Welding jali/frame etc as per drg as directed by EIC

b) Hard rubber shoes as per drg and as directed by EIC

c) Jali as per drg or as directed by EIC

d) one piece PVC Seat & back as per sample or as per Drg

e) Hand Board shall be made of 18 mm thick Prelaminated HDHMR board with 2 mm thick PVC edging with hot pressed machine with hings/ hollow section rod wherever required complete or as directed by EIC

Chair Dining JCOs/Ors FD-MAP/Spl type

a) Rear legs as per drg

b) Front Leg as per drg

c) Seating Frame members front, back sides as per drg

d) Bottom/Centre stiffener as per drg

e) Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

f) Back strip as per drg

g) bottom stiffner shall be provided below PVC seat irrespective what is shown on drg

h) PVC seat make-Amko/Comfo/Classic comple with screw rest all as per drg or as directed by EIC

Table Dressing gents (MAP)

a) Mirror 5mm thick (Make-Modiguard/Atul/Saintgobbain) & 6 mm thick Back ply BWP grade (Make: Century Ply/ Greenply/ Archidply) as per drg.

b) Fixing of table dressing

c)Complete box shall be made of 18 mm thick prelaminated HDHMR board , shade as approved by EIC/GE with 2 mm thick PVC edging in front & with 12 mm thick Back ply complete . Rest all as per drg.

d) 5 mm thick glass shelf of table dressing box as per drg.

Sofa Set 5 seater Spl type

a)Dry cleaning of sofa set 5 seater spl type complete as per direction EIC

b) remove US sofa cover and S&F new sofa cover with cushion doori/button etc wherever required .sofa fabric shall not be less than Rs 1500/RM

Chair Visitor FD/TP (Make- Supreme Orneto)

a) S&F new seat & Back as per sample or as directed by EIC

Work shop bench -FD

a) Remove complete plank & supply & fixed new top shall be made of 25 mm plywood BWR grade with 1 mm thick both side laminate with 2 mm thick PVC eading comple rest all as directed by EIC

b) TW corner 25 mm thick as directed by EIC

Table Laboratory -FD

a) remove US teak face from cabinet box ply and S&F new teak face 4 mm thick ply coomplete as per drg

b) drawer as per drg with telescopic channel

A) M&L for melamine polish with spray machine after removing of existing polish by scrapping and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP/spl type series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. B) M&L for painting two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. C) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (East) LKo including BSO's Furniture Yard as directed by Engineer-in-Charge

Bed Hard Steel: FD/E6/MAP/08( R)

Chair Dining officers :MAP

Peg Table :FD-277/ 384, DB-3973/MAP/TP/Spl

Bin soliled linen multipurpose FD-26/241/MAP

Sofa Set 5 seater: spl type

Stool dressing MAP

Table Bed Side :FD-276/248/MAP

Chair School with Hand Board FD-MAP/Spl Type

Table Dining 4 pers

Chair Verandah :FD-19, FD-256, FD-359/MAP/11/MAP-II/15

Charpoy D/Bunk- FD

Almirah med steel

Work shop bench -FD

Table Laboratory -FD

Charpoy MS plytop Drg No-MAP/Spl type

Chair Dining JCOs/Ors FD-MAP/Spl type

Rack Shoe Steel MAP

GUJRAL BUILDERS (BID ID -3115505)

Anand Construction (BID ID -3123960)