SPECIAL REPAIRS TO CERTAIN BUILDINGS AT 9 BRD AT AF STN PUNE UNDER GE (AF) LOHEGAON

Amount

Taking down plaster on brick or stone wall including racking out joints hatching for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level omplete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar omplete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub-class 'B' bricks, straight or curved on plain to any radius in half brick thick walls, built in CM 1:4 omplete all as specified and directed by Engr-in-Charge.

M&L for Firebrick work in linings to fire places, flues, etc. (other than in chimney shafts), set, jointed and pointed in fireclay complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10 mm thick in CM 1:4 on broken chajjas /facia/walls/ceilings etc, area n. exc 3 sqm each patch (in repairs) , includings finishing to match with existing surfaces complete all as specified and directed by Engr-in-Charge.

M & L for rendering 10mm thick in CM 1:6 finished even and smooth w/o using extra cement with sagol finished omplete all as specified and directed by Engr-in-Charge.

Material and labour for 15 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered/unplastered surfaces and applying three coats of whte wash on walls complete all as specified and directed by Engr-in-Charge

Material and labour for applying two coats of Cement Base Paint over a coat of Chalk whiting on walls including preparation of new or previously untreated surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for applying two coats of dry bound distemper over a coat of Chalk whiting on walls including preparation of new or previously untreated surfaces complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame exc 1.50 sqm but n.exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge

Taking down chowkats or frame n.exc 1.50 sqm each (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge

Taking down shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed by Engr-in-Charge

All as per item No above here in before but each not exceeding 1Sqm complete all as specified and directed by Engr-in-Charge

Refixing the shutters exc 1 Sqm but not.exc 2.00 Sqm each in same opening each complete all as specified and directed by Engr-in-Charge

Hacking out old broken glass any thickness, size qulaity or description from metal frames exc 1.5 sqm including punching drilling gout old glazing pins/spring clips complete all as specified and directed by Engr-in-Charge

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 125 x 60 mm complete all as specified and directed by Engr-in-Charge

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 105 x 60 mm complete all as specified and directed by Engr-in-Charge

S & F flush shutters water proof BWR grade solid core construction with block board core and ply wood face panel commercial type both sides 30mm thick complete all as specified and directed by Engr-in-Charge

S/F for second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass gauge etc (withsash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.20 (b) and fitted to chowkats complete all as specified and directed by Engr-in-Charge

M&L for 2nd class hard wood 30 mm thick glazed and skeleton shutter open rebated prepared to receive, glass guage etc, devided in to square with plain, chanferred or rounded mitered or rounded sush bar (any nos) as per SSR Pt-I Sec-8,Cl 8.20(b) complete all as specified and directed by Engr-in-Charge

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as directed by Engr-in-charge (Rajeshree Make Only) complete all as specified and directed by Engr-in-Charge

Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of ms tubes for top &bottem rails, ms frame shall be covered with heat moulded plain colour PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheetfor top rail ,lock rail, &bottem rail, on either side & as gap insert for top rail , panneling of plain colour pvc sheet to be fitted in the ms frame welded /sealed to the stiles & rails with suitable pvc sheet beading, &jointed together with solvent cement suppling & fixing in the frame at site as per spacification & drawing complete all as specified and directed by Engr-in-Charge

S&F 100 mm long butt hinges, medium weight, and cold rolled mild steel complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F 125 mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed by Engr-in-Charge .

S&F 125 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:3:6 type CO using 12.5 mm graded aggregate as in filling of pressed steel frame chowkats complete all as specified and directed by Engr-in-Charge

S & F galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width or aperture 1.40mm and fixed with tinned tackles or galvanished wire complete all as specified and directed by Engr-in-Charge

S&F in repairs for GI wire cloth of 0.56 mm nominal dia of wire & 1.18 mm avg width of aparaturre fixed with wooden beeds complete all as specified and directed by Engr-in-Charge

S & F sheet glass ordinary quality 3mm thick glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge

All as per item No above but of frosted glass complete all as specified and directed by Engr-in-Charge

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge

S&F Powder Coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engr-in-Charge

S&F Powder Coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-Charge

S&F Powder Coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engr-in-Charge

S & F Sheet Glass, Ordinary quality 5.5 mm Thick including necessary rubber beading complete all as specified and directed by Engr-in-Charge.

S&F in repairs 12 Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work to timber/rubber beading to Aluminium framework in Partition or Wall Panelling complete all as specified and directed by Engr-in-Charge.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-Charge

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE209(Gde E 165) complete all as specified and directed by Engr-in-Charge

Dismantling of wall/ceiling board as in ceiling and lining of any gauge or any thickness including cover fillets complete all as specified and directed by Engr-in-Charge

M&L for suspended false ceiling using anodized aluminium snap grid frame work for false ceiling, size of grid 605x605mm fixed to soffits with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by mean of ceiling cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fasterners 12.5 mm dia 40 mm long and perforated partical board/tiles for insulation and accostic purposes 60x60 cm in size, fixed with screw framework with stables on snap grid complete all as specified and directed by Engr-in-Charge

S&F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed by Engr-in-Charge

M&L two coats of synthetic enamel painting over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth complete all as specified and directed by Engr-in-Charge

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge

S&F Pre-painted galvanume aluminium zinc coating GI bashed corrugated steel sheeting 0.50mm th of any colour having tensile strength 550 Mpa as in roof covering/clading of wall , fixed with self tapping screw complete all as specified and directed by Engr-in-Charge

S&F Pre-painted galvanume sheet 0.80 mm th plain/corrugated/semicorrugated sheet in ridge hipvalley gutters drip and straight flashing (length or girth as fixed) with grade of zinc coating 275 gm/sqm complete all as specified and directed by Engr-in-Charge

M&L wind ties for roof including securing bolts and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge

S&F in repairs 2 mm Thk Fibre glass reinforced translucent corrugated sheeting with two orrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engr-in-Charge

S & F Rolled sections as in Columns, Vertical posts etc; fixed with angle cleats or other connecting plates Fe 290 (Gde E-165) complete all as specified and directed by Engr-in-Charge

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. (Gde E-250) quality A complete all as specified and directed by Engr-in-Charge

M&L for Reinforced cement concrete (nominal mix)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.Rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished concrete complete all as specified and directed by Engr-in-Charge

M&L for mild steel TMT bar 10mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mils steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

M&L for TMT bar 5mm and over upto and incl 10mm bar cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mils steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified over 15mm 1:4 plaster using WPC (done over fresh concrete) complete all as specified and directed by Engr-in-Charge

M&L for 15mm plaster over rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces in two layer 5mm with WPC over 10 mm rendering finished even and & fair complete all as specified and directed by Engr-in-Charge

M&L for 5mm Celing plaster over rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces in two layer 5mm with WPC over 10 mm rendering finished even and & fair complete all as specified and directed by Engr-in-Charge

M&L for Complete removal of existing treatment on wall and 2 coat of cement paint over one coat of primer with alkaliresistant priming paint complete all as specified and directed by Engr-in-Charge

M&L for preperation and 2 coat of oil bound distemper over one coat of primer complete all as specified and directed by Engr-in-Charge

M&L for preperation and ceiling 2 coat of white wash over one coat of primer complete all as specified and directed by Engr-in-Charge

M&L for preperation and 2 coat of cement paint over one coat of primer with alkaliresistant priming paint complete all as specified and directed by Engr-in-Charge

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm of type C1 1:3:6 using 20mm graded aggregate in width and setting in mortar 1:6 , complete all as specified and directed by Engr-in-Charge

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge

Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge

Taking up GI water tubing 15 mm bore from trenches/wall including all fittings, segregated and stacking the pipe complete all as specified and directed by Engr-in-Charge

All as per item No above here-in-before but 20 mm bore complete all as specified and directed by Engr-in-Charge

Material and labour for providing 75 mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as Path/Plinth protection finished the surface even & smooth with out using extra cement. complete all as specified and directed by Engr-in-Charge

M/L for PCC (1:2:4) type B1 using 20 mm graded aggregate (25 mm thick) as in lable course for tiling in flooring complete all as specified and directed by Engr-in-Charge

Material and labour for screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed by Engr-in-Charge

Material and labour for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

Material and labour for 10 mm thick rendering in cement mortar (1:4) for backing of tiles in vertical surfaces of wall complete all as specified and directed by Engr-in-Charge.

Material and labour glazed ceramic tiles of size 300mm x 200 mm x 6 mm thick coloured tiles on vertical surfaces set and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in white or coloured cement to match the existing surface complete all as specified and directed by Engr-in-Charge

Desconnecting existing tank seting aside (or lowering if required) for repairs clening etc. and hoisting if required reconnecting and re-fixing in same position (clening repairng etc. mesured seprately) Exc 500 & n Exc 1000 ltr water tank complete all as specified and directed by Engr-in-Charge

Cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etcExc 500 & n Exc 1000 ltr water tank complete all as specified and directed by Engr-in-Charge

Dismantling water tank and removing Exc 500 & n Exc 1000 ltr water tank complete all as specified and directed by Engr-in-Charge

S&F 500 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed tap) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed tap) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge

S&F water tank cover for 500 ltrs capacity rotational moulded polyethylene tank as per sample complete all as specified and directed by Engr-in-Charge

S&F water tank cover for1000 ltrs capacity rotational moulded polyethylene tank as per sample complete all as specified and directed by Engr-in-Charge

M&L for repair to 15mm elbows brass both ends scrowed and fixed complete all as specified and directed by Engr-in-Charge

M&L for repair to 15mm straight plain brass ferrules (or connecting screws) screwed both ends and fixed complete all as specified and directed by Engr-in-Charge

M&L for 15mm PVC perforated caps screwed to ends of puff or vent pipes complete all as specified and directed by Engr-in-Charge

S&F in repair 15mm ball brass valves high pressure with polythene flot and flynut completescred for iron pipes or brass ferrule and fix complete all as specified and directed by Engr-in-Charge

S&F in repair 20mm ball brass valves high pressure with polythene flot and flynut completescred for iron pipes or brass ferrule and fix complete all as specified and directed by Engr-in-Charge

S/F for GI tubing medioum grade with all fittings fixed to walls or laid in floors 15 mm bore complete all as specified and directed by Engr-in-Charge

-Ditto- all as per item No. above, but fixing only old GI tubing complete all as specified and directed by Engr-in-Charge

S/F for GI tubing medioum grade with all fittings fixed to walls or laid in floors 20 mm bore complete all as specified and directed by Engr-in-Charge

-Ditto- all as per item No. above, but fixing only old GI tubing (20 mm bore) complete all as specified and directed by Engr-in-Charge

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor complete all as specified and directed by Engr-in-Charge

S&F, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets complete all as specified and directed by Engr-in-Charge

Supply and fix, bowel urinal flat back of size 465mm x 355mm x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals again complete all as specified and directed by Engr-in-Charge

Supply and fix, as in repair, vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed by Engr-in-Charge

Supply only, 15 mm bore pillar taps fancy type (long neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engr-in-Charge

S&F in repairs for 15 mm bore stop valves best copper alloy screwed down high pressured with batterfly handle screwed both ends for iron pipes fancy type choromium plate (concealed type) complete all as specified and directed by Engr-in-Charge

S&F in repairs for 15 mm bore angle stop valves of PTMT ant colour high pressure screwed for iron pipe and fixed (minimum weight 15mm 90gms) complete all as specified and directed by Engr-in-Charge

S&F in repairs for 15 mm bore push tap any colour high pressure PTMT screwed for iron pipe and fixed (minimum weight 15mm 47gms) complete all as specified and directed by Engr-in-Charge

S&F in repairs for bib cock 15 mm bore fancy chromioum plated with long shank & cup complete all as specified and directed by Engr-in-Charge

M&L for 75mm cast iron nahani trap including jointing to west pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge

Supply and fix ,Towel rail 450 mm long of PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleat ( min weight 170 gms) complete all as specified and directed by Engr-in-Charge

S&F LPDE waste pipes of 32mm bore pressure rating 6 Kgf/Sqcm for wash hand basin, complete all as specified and directed by Engr-in-Charge

S&F PVC connection 15mm dia sizes with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-Charge

S&F soap disk stainless steel complete all as specified and directed by Engr-in-Charge

S&F in repairs High density polythene pipe(HDPE)of pressure rating 6 Kgf /Sq cm fixed comp to wall or laid in tranches or under floors.(50 mm bore) incl all fittings complete all as specified and directed by Engr-in-Charge

Demolition and breaking up CI/PVC drain pipes 50 to 110 mm complete all as specified and directed by Engr-in-Charge

S & F PVC (SWR) pipes 75mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge

S & F PVC (SWR) pipes 110mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge

S & F PVC (SWR) bend 110mm dia with access door bends complete all as specified and directed by Engr-in-Charge

S & F PVC (SWR) bend 75mm dia with access door bends complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) junction double, (Double T) equal or unequal 110mm Dia with access door bends complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) junction double, (Double T) equal or unequal 75mm Dia with access door bends complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) branch piece double, (Double Y) equal or unequal 110mm Dia with access door bends complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) branch piece double, (Double Y) equal or unequal 75mm Dia with access door bends complete all as specified and directed by Engr-in-Charge

S & F PVC (SWR) gully trap 110 mm dia fixed in cement concrete and providing connection upto 1st manhole with PVC pipe complete all as specified and directed by Engr-in-Charge

S & F PVC (SWR) P traps bore 125/110 mm dia complete all as specified and directed by Engr-in-Charge

S&F grating doom 150mm size of PTMT for wash basin fixed in repairs complete all as specified and directed by Engr-in-Charge

S&F for self contained wind power design indutrial turbo ventillator 60 cm dia. Including ball bearing etc complete all as specified and directed by Engr-in-Charge

Surface excavation n.exc. 30 cm deep and averaging 10 cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed by Engr-in-Charge

M&L Cement concrete in foundations, filling and mass-concrete type D2 1:4:8 (40 mm graded aggregate) complete all as specified and directed by Engr-in-Charge

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete type D1 1:4:8 (20mm graded aggregate) set in CM 1:6 complete all as specified and directed by Engr-in-Charge

M7L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & fair complete all as specified and directed by Engr-in-Charge

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement & pigment complete all as specified and directed by Engr-in-Charge

M&L 50 mm thick sand cushaning for fixing of paver block complete all as specified and directed by Engr-in-Charge

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc complete all as specified and directed by Engr-in-Charge

Taking down carefully by unscrewing the unserviceable DB Boxes, MC distribution boards SP & TPN with porcelain cutouts etc complete all as specified and directed by Engr-in-Charge

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire complete all as specified and directed by Engr-in-Charge

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed by Engr-in-Charge (a) One light point controlled by one switch .

(b) One Fan point controlled by one regulator /switch.

(c) One 3 pin socket 5 A on independent board.

(d) One 3 pin socket 5 A on the same switch board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets complete all as specified and directed by Engr-in-Charge

M/L for sub main wiring with two runs of single core 4.0Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 2.5 Sq mm single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including PVC casing & caping all as directed and specified . ( Note:- Two runs of 4.0 Sqmm copper cable,one run of earth wire 2.5 Sqmm copper cable including PVC casing & caping shall be measured & paid as one length ) complete all as specified and directed by Engr-in-Charge

Supply and fix switch piano flush type 5 Amp one way complete all as specified and directed by Engr-in-Charge

Supply and fix switch socket combination 2 in 1, 5 A flush type complete all as specified and directed by Engr-in-Charge

Supply and fix switch socket combination 5 / 16 A, 5 in 1, flush type complete all as specified and directed by Engr-in-Charge

Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm complete all as specified and directed by Engr-in-Charge

Supply and fix Socket out let 2in 1, 3 pin 5 Amp complete all as specified and directed by Engr-in-Charge

S/F Fan Regulator electronic step type 100 W complete all as specified and directed by Engr-in-Charge

Supply & fix LED tube light along with fixture, 20 W complete all as specified and directed by Engr-in-Charge

Supply and fix Energy efficient recess mounted LED panel fitting 18 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 3300/4000K colour temperature (Warm white) with current electronic connections complete all as specified and directed by Engr-in-Charge

Supply and fix Energy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 3300/4000K colour temperature (Cool white) with current electronic connections complete all as specified and directed by Engr-in-Charge

Supply and fixing LED mirror light fitting 09 Watt including electrical connections complete all as specified and directed by Engr-in-Charge

Supply & fix LED down lighter, 9 W complete all as specified and directed by Engr-in-Charge

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed by Engr-in-Charge

Supply and fix MCB SPN 240 V, 6 to 32 Amps 'C' series complete all as specified and directed by Engr-in-Charge

Supply and fix MCB SP 240 V ,6 to 32 Amps 'C' series complete all as specified and directed by Engr-in-Charge

S&F heavy duty exhaust fan 450mm 230V, 1400 RPM (M S Body) complete with louvers and back shutter suitable size of nut bolts etc complete all as specified and directed by Engr-in-Charge.

S & F ceiling fan 1200mm sweep 230 volts, 5 star rating including blades , canopy & downrod complete all as specified and directed by Engr-in-Charge

Taking down exhaust fan, cable and dismantling blades and removing fan and blade to store for safe custody and re-fixing the same after servicing and painting of exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and connecting up including provision of cable from ceiling rose complete all as specified and directed by Engr-in-Charge

S & F wall mounting fans 230 volts 400mm sweep complete all as specified and directed by Engr-in-Charge

Smruti Construction

M/s Kirti Enterprises

santulan & Company