SITC of Automatic Power Factor Correction (APFC) Panel Including Capacitor Bank at WTP Nagda (275 KVAR)

Supply of XLPE Insulated power cable (conforming IS-7098) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor ARMOURED 3½ CORE 300 Sq.mm.(XLPE) Laying of one number PVC insulated and PVC sheathed power cable of 1.1 kV grade of size exceeding 25 Sq.mm but not exceeding 400 Sq mm in the existing RCC/Hume Stoneware/G.I. Pipe as required. Supplying and fixing cramping type Alum. lugs as per I.S.S. Specification suitable for following size of cable with Alu. /Copper solid/stranded conductor evently cramped with high/pressure tool and connected to switch gear/Bus/M.C.C.B./ M.C.B. etc. as required complete.For Conductor Size-300 Sq.mm. Supply and making cable end termination with all necessary materials including lugs etc.Heat shr.jointg. kit 1.1 kV XLPE/HD cable O.D. ternmination d. 350-500 sqmm 2 / 3 / 3½ / 4core Supply, fixing, testing & commissioning wall/floor mounted LT panel primer coated with powder coated paint & provided with required gasket for dust/vermin proof with degree of protection IP42 suitable for 415Volt 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet upto 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Metre, Volt Metre, selector switches, frequency Metre, phase indicating lamp, Energy Metre complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs, ACB, panel mounted changeover switch/SFUs, etc. as required but excluding cost of busbar strips, Ampere Metre, Volt Metre, selector switch as per approved design & specification MCCB with Breaking Capacity 50 KA at 415 V Current Rating -800 Amps & Adjustable: 70% -100% thermal & 4-10 times magnetic setting Supplying and fixing of LT Panel accessaries of approved make in existing LT Panel including connections etc.as required as per spececification Digital Ampere Meter with CTs with selector switch Digital Volt Meter with selector switch & HRC fuse Aluminium bus bar strips with PVC sleeves LED lamps Supplying and fixing heavy duty cable gland for P.V.C. insulated armoured cable with brass washer, Rubber ring complete erected with cable and lead connection etc. as per specification complete.Gland Size 70mm suitable for cable 3 x 240 Sq.mm OR 3½ x 300 Sq.mm Supplying and fixing of capacitor duty contactor of approved make in existing power factor/LT panel including connections etc.as required as per specification. For 30 kVAR 440V,3Ph,50Hz, Aux contact-1NO APP heavy duty capacitor 440V, 3 Ph. Supply and fixing of mixed die-electric ultra-heavy duty APP capacitor 440Volt, 3 Ph., peak inrush current upto 500 x In, over current upto 3 x In(normal current), operating losses total not more than 0.35 W/kVAR, operating life not less than 300000 hrs, switching 20000 operation/year, as per IS:13340- 1993, IS:13341-1992, IS:13585-1994, of approved make as required as per specification 5 to 25 kVAR bank Supplying and fixing of APFC relay 1A/5 A site selectable, measurement of individual current and voltage harmonic (THD), capacitor failure indication, In-built temperature sensor of approved make in existing power factor Panel including connections etc. as required as per specification as mentioned below : 12 Step relay Automatic power factor relay 12 Steps 230V 144 x 144mm Supplying and fixing of CT 1A/5A as per site selectable busbar dimension of approved make in existing main panel for power factor Panel including connections etc. as required as per specification.